The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

Buffer overflow in Microsoft SQL Server 2005 SP1 and SP2, and 2005 Express Edition SP1 and SP2, allows remote authenticated users to execute arbitrary code via a crafted insert statement.

A security vulnerability has been detected in H3C Magic B1 up to 100R004. Affected by this vulnerability is the function Edit_BasicSSID_5G of the file /goform/aspForm. Such manipulation of the argument param leads to buffer overflow. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in UTT HiPER 810G up to 1.7.7-171114. This affects the function strcpy of the file /goform/NTP. The manipulation leads to buffer overflow. The attack may be initiated remotely. The exploit is publicly available and might be used.

A weakness has been identified in UTT HiPER 810G up to 1.7.7-171114. Affected is the function strcpy of the file /goform/formConfigDnsFilterGlobal. This manipulation causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks.

A security flaw has been discovered in Tenda i3 1.0.0.6(2204). This vulnerability affects the function formWifiMacFilterSet of the file /goform/WifiMacFilterSet. The manipulation of the argument index results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability has been found in Tenda F453 1.0.0.3. This affects the function fromwebExcptypemanFilter of the file /goform/webExcptypemanFilter. The manipulation of the argument page leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Tenda FH451 1.0.0.9. This impacts the function fromSetCfm of the file /goform/setcfm. The manipulation of the argument funcname/funcpara1 results in stack-based buffer overflow. The attack may be performed from remote. The exploit has been made public and could be used.

OpenBase 10.0.5 and earlier allows remote authenticated users to trigger a free of an arbitrary memory location via long strings in a SELECT statement. NOTE: this might be a buffer overflow, but it is not clear.

A security flaw has been discovered in UTT HiPER 810G up to 1.7.7-1711. Affected by this issue is the function strcpy of the file /goform/getOneApConfTempEntry. Performing a manipulation results in buffer overflow. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks.

Double free vulnerability in the krb5_def_store_mkey function in lib/kdb/kdb_default.c in MIT Kerberos 5 (krb5) 1.5 has unknown impact and remote authenticated attack vectors. NOTE: the free operations occur in code that stores the krb5kdc master key, and so the attacker must have privileges to store this key.

A vulnerability was found in Tenda FH1202 1.2.0.14(408). This impacts the function fromP2pListFilter of the file /goform/P2pListFilter. The manipulation of the argument page results in stack-based buffer overflow. The attack can be executed remotely. The exploit has been made public and could be used.

A flaw has been found in Tenda i3 1.0.0.6(2204). This impacts the function formSetCfm of the file /goform/setcfm. This manipulation of the argument funcpara1 causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been published and may be used.

A security vulnerability has been detected in Tenda FH1202 1.2.0.14(408). Impacted is the function formWrlsafeset of the file /goform/AdvSetWrlsafeset. Such manipulation of the argument mit_ssid/mit_ssid_index leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used.

A flaw has been found in Tenda i3 1.0.0.6(2204). Affected is the function formwrlSSIDget of the file /goform/wifiSSIDget. Executing a manipulation of the argument index can lead to stack-based buffer overflow. The attack may be launched remotely. The exploit has been published and may be used.

A vulnerability was identified in Tenda F453 1.0.0.3/3.As. Impacted is the function fromPptpUserAdd of the file /goform/PPTPDClient. Such manipulation of the argument username/opttype leads to stack-based buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used.

A weakness has been identified in UTT HiPER 810G up to 1.7.7-1711. This affects the function strcpy of the file /goform/formApMail. Executing a manipulation can lead to buffer overflow. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks.

Buffer overflow in OpenBase 10.0.5 and earlier might allow remote authenticated users to execute arbitrary code or cause a denial of service (daemon crash) by creating a stored procedure with a long name and invoking this procedure, which triggers heap corruption.

Multiple stack-based buffer overflows in Computer Associates (CA) Alert Notification Service (Alert.exe) 8.1.586.0, 8.0.450.0, and 7.1.758.0, as used in multiple CA products including Anti-Virus for the Enterprise 7.1 through r11.1 and Threat Manager for the Enterprise 8.1 and r8, allow remote authenticated users to execute arbitrary code via crafted RPC requests.

A vulnerability was detected in Tenda F453 1.0.0.3. Affected by this issue is the function fromSafeUrlFilter of the file /goform/SafeUrlFilter. Performing a manipulation of the argument page results in buffer overflow. The attack can be initiated remotely. The exploit is now public and may be used.

A vulnerability was determined in Tenda F453 1.0.0.3. Affected is the function fromAdvSetWan of the file /goform/AdvSetWan of the component httpd. Executing a manipulation of the argument wanmode/PPPOEPassword can lead to buffer overflow. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized.

Buffer overflow in the IMAP service in IBM Lotus Domino before 6.5.6 FP2, and 7.x before 7.0.3, allows remote authenticated users to execute arbitrary code via a long mailbox name.

A vulnerability has been found in Mercury KM08-708H GiGA WiFi Wave2 1.1. Affected by this issue is the function sub_450B2C of the file /goform/mcr_setSysAdm. The manipulation of the argument ChgUserId leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A flaw has been found in Tenda F453 1.0.0.3. This affects the function fromqossetting of the file /goform/qossetting. Executing a manipulation of the argument qos can lead to buffer overflow. The attack can be launched remotely. The exploit has been published and may be used.

A vulnerability was found in Tenda F453 1.0.0.3. This issue affects the function frmL7ImForm of the file /goform/L7Im. The manipulation of the argument page results in buffer overflow. The attack may be launched remotely. The exploit has been made public and could be used.

A vulnerability was identified in Tenda F453 1.0.0.3. Affected by this vulnerability is the function fromGstDhcpSetSer of the file /goform/GstDhcpSetSer of the component httpd. The manipulation of the argument dips leads to buffer overflow. The attack may be initiated remotely. The exploit is publicly available and might be used.

A security vulnerability has been detected in Tenda F453 1.0.0.3. Affected by this vulnerability is the function fromSafeMacFilter of the file /goform/SafeMacFilter. Such manipulation of the argument page leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used.

A vulnerability has been found in Tenda F453 1.0.0.3. This vulnerability affects the function fromSetIpBind of the file /goform/SetIpBind. The manipulation of the argument page leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A security flaw has been discovered in Tenda AC15 up to 15.13.07.13. Affected by this issue is some unknown functionality of the file /goform/TextEditingConversion. The manipulation of the argument wpapsk_crypto2_4g results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was found in Tenda F453 1.0.0.3. This impacts the function fromP2pListFilter of the file /goform/P2pListFilterof of the component httpd. The manipulation of the argument page results in buffer overflow. The attack may be launched remotely. The exploit has been made public and could be used.

A vulnerability was identified in Tenda F453 1.0.0.3. Affected by this vulnerability is the function formWrlsafeset of the file /goform/AdvSetWrlsafeset of the component httpd. Such manipulation of the argument mit_ssid_index leads to buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used.

Stack-based buffer overflow in the Microsoft Message Queuing (MSMQ) service in Microsoft Windows 2000 Server SP4, Windows 2000 Professional SP4, and Windows XP SP2 allows attackers to execute arbitrary code via a long string in an opnum 0x06 RPC call to port 2103. NOTE: this is remotely exploitable on Windows 2000 Server.

Multiple buffer overflows in Ipswitch IMail before 2006.21 allow remote attackers or authenticated users to execute arbitrary code via (1) the authentication feature in IMailsec.dll, which triggers heap corruption in the IMail Server, or (2) a long SUBSCRIBE IMAP command, which triggers a stack-based buffer overflow in the IMAP Daemon.

A security flaw has been discovered in Tenda F453 1.0.0.3. Affected by this issue is the function frmL7ProtForm of the file /goform/L7Prot of the component httpd. Performing a manipulation of the argument page results in buffer overflow. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks.

A buffer overflow vulnerability in "Add command" functionality exists in Flexense SyncBreeze Enterprise <= 10.3.14. The vulnerability can be triggered by an authenticated attacker who submits more than 5000 characters as the command name. It will cause termination of the SyncBreeze Enterprise server and possibly remote command execution with SYSTEM privilege.

A vulnerability was determined in Tenda F453 1.0.0.3. Affected is the function fromDhcpListClient of the file /goform/DhcpListClient of the component httpd. This manipulation of the argument page causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized.

A weakness has been identified in Tenda F453 1.0.0.3. This affects the function fromAddressNat of the file /goform/addressNat of the component httpd. Executing a manipulation of the argument entrys can lead to buffer overflow. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks.

SD-330AC and AMC Manager provided by silex technology, Inc. contain a stack-based buffer overflow vulnerability in processing the redirect URLs. Arbitrary code may be executed on the device.

An issue was discovered in Extreme Networks ExtremeWireless WiNG 5.x before 5.8.6.9 and 5.9.x before 5.9.1.3. There is a Hidden Root Shell by entering the administrator password in conjunction with the 'service start-shell' CLI command.

An exploitable buffer overflow vulnerability exists in the camera "create" feature of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250 devices with firmware version 0.20.17. The video-core process incorrectly extracts the "state" field from a user-controlled JSON payload, leading to a buffer overflow on the stack. An attacker can send an HTTP request to trigger this vulnerability.

A weakness has been identified in Tenda F453 1.0.0.3. This affects the function fromNatStaticSetting of the file /goform/NatStaticSetting of the component httpd. Executing a manipulation of the argument page can lead to buffer overflow. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks.

An exploitable buffer overflow vulnerability exists in the credentials handler of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250-Firmware version 0.20.17. The video-core process incorrectly extracts fields from a user-controlled JSON payload, leading to a buffer overflow on the stack. The strncpy overflows the destination buffer, which has a size of 2,000 bytes. An attacker can send an arbitrarily long "sessionToken" value in order to exploit this vulnerability.

Multiple exploitable buffer overflow vulnerabilities exist in the credentials handler of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250 devices with firmware version 0.20.17. The video-core process incorrectly extracts fields from a user-controlled JSON payload, leading to a buffer overflow on the stack. A strncpy overflows the destination buffer, which has a size of 16 bytes. An attacker can send an arbitrarily long "region" value in order to exploit this vulnerability.

A vulnerability was determined in Tenda F453 1.0.0.3. Impacted is the function fromSetWifiGusetBasic of the file /goform/AdvSetWrlsafeset of the component httpd. This manipulation of the argument mit_ssid causes buffer overflow. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized.

Buffer overflow in the glob implementation (glob.c) in libc in NetBSD-current before 20050914, NetBSD 2.* and 3.* before 20061203, and Apple Mac OS X before 2007-004, as used by the FTP daemon and tnftpd, allows remote authenticated users to execute arbitrary code via a long pathname that results from path expansion.

A security vulnerability has been detected in Tenda F453 1.0.0.3. This impacts the function fromSafeEmailFilter of the file /goform/SafeEmailFilter of the component httpd. The manipulation of the argument page leads to buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used.

Stack-based buffer overflow in the eap_do_notify function in eap.c in xsupplicant before 1.2.6, and possibly other versions, allows remote authenticated users to execute arbitrary code via unspecified vectors.

An exploitable buffer overflow vulnerability exists in the credentials handler of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250 - Firmware version 0.20.17. The video-core process incorrectly extracts the videoHostUrl field from a user-controlled JSON payload, leading to a buffer overflow on the stack. An attacker can send an HTTP request to trigger this vulnerability.

A vulnerability was found in D-Link DWR-M960 1.01.07. This issue affects the function sub_452CCC of the file /boafrm/formWlEncrypt of the component WLAN Encryption Configuration Endpoint. The manipulation of the argument submit-url results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been made public and could be used.

A vulnerability was detected in D-Link DWR-M960 1.01.07. This affects the function sub_462E14 of the file /boafrm/formSysLog of the component System Log Configuration Endpoint. Performing a manipulation of the argument submit-url results in stack-based buffer overflow. The attack can be initiated remotely. The exploit is now public and may be used.