An issue in the Bluetooth firmware of JXL 9 Inch Car Android Double Din Player Android v12.0 allows attackers to cause a Denial of Service (DoS) via sending a crafted Link Manager Protocol (LMP) packet.
An issue was discovered in iPortalis iCS 7.1.13.0. Attackers can send a sequence of requests to rapidly cause .NET Input Validation errors. This increases the size of the log file on the remote server until memory is exhausted, therefore consuming the maximum amount of resources (triggering a denial of service condition).
A potential denial of service vulnerability is present in versions of Apache CXF before 3.5.10, 3.6.5 and 4.0.6. In some edge cases, the CachedOutputStream instances may not be closed and, if backed by temporary files, may fill up the file system (it applies to servers and clients).
All versions of package djvalidator are vulnerable to Regular Expression Denial of Service (ReDoS) by sending crafted invalid emails - for example, --@------------------------------------------------------------------------------------------------------------------------!.
A Node.js application that allows an attacker to trigger a DNS request for a host of their choice could trigger a Denial of Service in versions < 15.2.1, < 14.15.1, and < 12.19.1 by getting the application to resolve a DNS record with a larger number of responses. This is fixed in 15.2.1, 14.15.1, and 12.19.1.
All versions of package trim are vulnerable to Regular Expression Denial of Service (ReDoS) via trim().
All versions of package dat.gui are vulnerable to Regular Expression Denial of Service (ReDoS) via specifically crafted rgb and rgba values.
Prototype pollution vulnerability in fastify-multipart < 1.0.5 allows an attacker to crash fastify applications parsing multipart requests by sending a specially crafted request.
Citrix ADC and Citrix Gateway 13.0 before 13.0-64.35, Citrix ADC and NetScaler Gateway 12.1 before 12.1-58.15, Citrix ADC 12.1-FIPS before 12.1-55.187, Citrix ADC and NetScaler Gateway 12.0, Citrix ADC and NetScaler Gateway 11.1 before 11.1-65.12, Citrix SD-WAN WANOP 11.2 before 11.2.1a, Citrix SD-WAN WANOP 11.1 before 11.1.2a, Citrix SD-WAN WANOP 11.0 before 11.0.3f, Citrix SD-WAN WANOP 10.2 before 10.2.7b are vulnerable to a denial of service attack originating from the management network.
This affects the package codemirror before 5.58.2; the package org.apache.marmotta.webjars:codemirror before 5.58.2. The vulnerable regular expression is located in https://github.com/codemirror/CodeMirror/blob/cdb228ac736369c685865b122b736cd0d397836c/mode/javascript/javascript.jsL129. The ReDOS vulnerability of the regex is mainly due to the sub-pattern (s|/*.*?*/)*
The package ua-parser-js before 0.7.22 are vulnerable to Regular Expression Denial of Service (ReDoS) via the regex for Redmi Phones and Mi Pad Tablets UA.
Prototype pollution in json-bigint npm package < 1.0.0 may lead to a denial-of-service (DoS) attack.
Envoy version 1.14.2, 1.13.2, 1.12.4 or earlier may exhaust file descriptors and/or memory when accepting too many connections.
Node.js < 14.11.0 is vulnerable to HTTP denial of service (DoS) attacks based on delayed requests submission which can make the server unable to accept new connections.
BSS Continuity CMS 4.2.22640.0 has a Remote Denial Of Service vulnerability
The _encode_invalid_chars function in util/url.py in the urllib3 library 1.25.2 through 1.25.7 for Python allows a denial of service (CPU consumption) because of an inefficient algorithm. The percent_encodings array contains all matches of percent encodings. It is not deduplicated. For a URL of length N, the size of percent_encodings may be up to O(N). The next step (normalize existing percent-encoded bytes) also takes up to O(N) for each step, so the total time is O(N^2). If percent_encodings were deduplicated, the time to compute _encode_invalid_chars would be O(kN), where k is at most 484 ((10+6*2)^2).
A vulnerability has been identified in SIMATIC S7-200 SMART CPU family (All versions >= V2.2 < V2.5.1). Affected devices do not properly handle large numbers of new incomming connections and could crash under certain circumstances. An attacker may leverage this to cause a Denial-of-Service situation.
A CWE-400: Uncontrolled Resource Consumption vulnerability exists in Easergy T300 (Firmware version 1.5.2 and older) which could allow an attacker to login multiple times resulting in a denial of service.
The secure OS module has configuration defects. Successful exploitation of this vulnerability may affect availability.
In all versions of Omron PLC CJ Series, an attacker can send a series of specific data packets within a short period, causing a service error on the PLC Ethernet module, which in turn causes a PLC service denied result.
all versions of url-regex are vulnerable to Regular Expression Denial of Service. An attacker providing a very long string in String.test can cause a Denial of Service.
**VERSION NOT SUPPORTED WHEN ASSIGNED** A vulnerability could cause TCM modules to reset when under high network load in TCM v10.4.x and in system v10.3.x. This vulnerability was discovered and remediated in version v10.5.x on August 13, 2009. TCMs from v10.5.x and on will no longer exhibit this behavior.
Uncontrolled resource consumption vulnerability in Ethernet Port on MELSEC iQ-R, Q and L series CPU modules (R 00/01/02 CPU firmware versions '20' and earlier, R 04/08/16/32/120 (EN) CPU firmware versions '52' and earlier, R 08/16/32/120 SFCPU firmware versions '22' and earlier, R 08/16/32/120 PCPU all versions, R 08/16/32/120 PSFCPU all versions, R 16/32/64 MTCPU all versions, Q03 UDECPU, Q 04/06/10/13/20/26/50/100 UDEHCPU serial number '22081' and earlier , Q 03/04/06/13/26 UDVCPU serial number '22031' and earlier, Q 04/06/13/26 UDPVCPU serial number '22031' and earlier, Q 172/173 DCPU all versions, Q 172/173 DSCPU all versions, Q 170 MCPU all versions, Q 170 MSCPU all versions, L 02/06/26 CPU (-P) and L 26 CPU - (P) BT all versions) allows a remote unauthenticated attacker to stop the Ethernet communication functions of the products via a specially crafted packet, which may lead to a denial of service (DoS) condition .
parisneo/lollms-webui is vulnerable to a denial of service (DoS) attack due to uncontrolled resource consumption. Attackers can exploit the `/open_code_in_vs_code` and similar endpoints without authentication by sending repeated HTTP POST requests, leading to the opening of Visual Studio Code or the default folder opener (e.g., File Explorer, xdg-open) multiple times. This can render the host machine unusable by exhausting system resources. The vulnerability is present in the latest version of the software.
When MELSOFT transmission port (UDP/IP) of Mitsubishi Electric MELSEC iQ-R series (all versions), MELSEC iQ-F series (all versions), MELSEC Q series (all versions), MELSEC L series (all versions), and MELSEC F series (all versions) receives massive amount of data via unspecified vectors, resource consumption occurs and the port does not process the data properly. As a result, it may fall into a denial-of-service (DoS) condition. The vendor states this vulnerability only affects Ethernet communication functions.
CAPI (Cloud Controller) versions prior to 1.101.0 are vulnerable to a denial-of-service attack in which an unauthenticated malicious attacker can send specially-crafted YAML files to certain endpoints, causing the YAML parser to consume excessive CPU and RAM.
Uncontrolled resource consumption vulnerability in Mitsubishi Electoric FA Engineering Software (CPU Module Logging Configuration Tool Ver. 1.94Y and earlier, CW Configurator Ver. 1.010L and earlier, EM Software Development Kit (EM Configurator) Ver. 1.010L and earlier, GT Designer3 (GOT2000) Ver. 1.221F and earlier, GX LogViewer Ver. 1.96A and earlier, GX Works2 Ver. 1.586L and earlier, GX Works3 Ver. 1.058L and earlier, M_CommDTM-HART Ver. 1.00A, M_CommDTM-IO-Link Ver. 1.02C and earlier, MELFA-Works Ver. 4.3 and earlier, MELSEC-L Flexible High-Speed I/O Control Module Configuration Tool Ver.1.004E and earlier, MELSOFT FieldDeviceConfigurator Ver. 1.03D and earlier, MELSOFT iQ AppPortal Ver. 1.11M and earlier, MELSOFT Navigator Ver. 2.58L and earlier, MI Configurator Ver. 1.003D and earlier, Motion Control Setting Ver. 1.005F and earlier, MR Configurator2 Ver. 1.72A and earlier, MT Works2 Ver. 1.156N and earlier, RT ToolBox2 Ver. 3.72A and earlier, and RT ToolBox3 Ver. 1.50C and earlier) allows an attacker to cause a denial of service (DoS) condition attacks via unspecified vectors.
Improper input validation in GROWI versions prior to v4.2.3 (v4.2 Series), GROWI versions prior to v4.1.12 (v4.1 Series), and GROWI v3 series and earlier GROWI versions prior to v4.2.3 (v4.2 Series), GROWI versions prior to v4.1.12 (v4.1 Series), and GROWI v3 series and earlier allows remote attackers to cause a denial of service via unspecified vectors.
On BIG-IP LTM 15.1.0-15.1.0.5, 14.1.0-14.1.2.7, 13.1.0-13.1.3.4, and 12.1.0-12.1.5.1, the Traffic Management Microkernel (TMM) process may consume excessive resources when processing SSL traffic and client authentication are enabled on the client SSL profile.
In BIG-IP versions 15.1.0-15.1.0.4, 15.0.0-15.0.1.3, and 14.1.0-14.1.2.6, a BIG-IP virtual server with a Session Initiation Protocol (SIP) ALG profile, parsing SIP messages that contain a multi-part MIME payload with certain boundary strings can cause TMM to free memory to the wrong cache.
A vulnerability was found in Undertow. This vulnerability impacts a server that supports the wildfly-http-client protocol. Whenever a malicious user opens and closes a connection with the HTTP port of the server and then closes the connection immediately, the server will end with both memory and open file limits exhausted at some point, depending on the amount of memory available. At HTTP upgrade to remoting, the WriteTimeoutStreamSinkConduit leaks connections if RemotingConnection is closed by Remoting ServerConnectionOpenListener. Because the remoting connection originates in Undertow as part of the HTTP upgrade, there is an external layer to the remoting connection. This connection is unaware of the outermost layer when closing the connection during the connection opening procedure. Hence, the Undertow WriteTimeoutStreamSinkConduit is not notified of the closed connection in this scenario. Because WriteTimeoutStreamSinkConduit creates a timeout task, the whole dependency tree leaks via that task, which is added to XNIO WorkerThread. So, the workerThread points to the Undertow conduit, which contains the connections and causes the leak.
Dell EMC Isilon OneFS versions 8.2.2 and earlier contain a denial of service vulnerability. SmartConnect had an error condition that may be triggered to loop, using CPU and potentially preventing other SmartConnect DNS responses.
Uncontrolled resource consumption vulnerability in MELSEC iQ-R Series CPU Modules (R00/01/02CPU Firmware versions from '05' to '19' and R04/08/16/32/120(EN)CPU Firmware versions from '35' to '51') allows a remote attacker to cause an error in a CPU unit via a specially crafted HTTP packet, which may lead to a denial-of-service (DoS) condition in execution of the program and its communication.
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, 11.1, and 11.5 could allow an unauthenticated attacker to cause a denial of service due a hang in the execution of a terminate command. IBM X-Force ID: 180076.
Adobe Experience Manager versions 6.5, and 6.4 have an uncontrolled resource consumption vulnerability. Successful exploitation could lead to denial-of-service.
IBM MQ Internet Pass-Thru 2.1 and 9.2 could allow a remote user to cause a denial of service by sending malformed MQ data requests which would consume all available resources. IBM X-Force ID: 188093.
IBM Spectrum Protect Plus 10.1.0 through 10.1.7 could allow a remote user to inject arbitrary data iwhich could cause the serivce to crash due to excess resource consumption. IBM X-Force ID: 193659.
A vulnerability has been found in AMPPS 2.7 and classified as problematic. Affected by this vulnerability is an unknown functionality of the component Encryption Passphrase Handler. The manipulation leads to denial of service. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 4.0 is able to address this issue. It is recommended to upgrade the affected component. The associated identifier of this vulnerability is VDB-252679. NOTE: The vendor explains that AMPPS 4.0 is a complete overhaul and the code was re-written.
Liferay Portal 7.4.0 through 7.4.3.99, and Liferay DXP 2023.Q3.1 through 2023.Q3.4, 7.4 GA through update 92, 7.3 GA through update 35, and older unsupported versions does not limit the number of objects returned from Headless API requests, which allows remote attackers to perform denial-of-service (DoS) attacks on the application by executing a request that returns a large number of objects.
A vulnerability has been found in CodeAstro Employee Task Management System 1.0 and classified as problematic. Affected by this vulnerability is an unknown functionality of the file \employee-tasks-php\attendance-info.php. The manipulation of the argument aten_id leads to denial of service. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-252697 was assigned to this vulnerability.
Uncontrolled Resource Consumption vulnerability in PlexTrac allows WebSocket DoS.This issue affects PlexTrac: from 1.61.3 before 2.8.1.
A flaw was found in libwebp in versions before 1.0.1. When reading a file libwebp allocates an excessive amount of memory. The highest threat from this vulnerability is to the service availability.
BACnet Test Server versions up to and including 1.01 contains a remote denial of service vulnerability in its BACnet/IP BVLC packet handling. The server fails to properly validate the BVLC Length field in incoming UDP BVLC frames on the default BACnet port (47808/udp). A remote unauthenticated attacker can send a malformed BVLC Length value to trigger an access violation and crash the application, resulting in a denial of service.
Unsafe validation RegEx in EmailValidator class in com.vaadin:vaadin-server versions 7.0.0 through 7.7.21 (Vaadin 7.0.0 through 7.7.21) allows attackers to cause uncontrolled resource consumption by submitting malicious email addresses.
A vulnerability in the Distance Vector Multicast Routing Protocol (DVMRP) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to exhaust process memory of an affected device. The vulnerability is due to insufficient queue management for Internet Group Management Protocol (IGMP) packets. An attacker could exploit this vulnerability by sending crafted IGMP traffic to an affected device. A successful exploit could allow the attacker to cause memory exhaustion, resulting in instability of other processes. These processes may include, but are not limited to, interior and exterior routing protocols. Cisco will release software updates that address this vulnerability.
A vulnerability in the implementation of the Border Gateway Protocol (BGP) module in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of certain BGP packets. An attacker could exploit this vulnerability by sending a crafted BGP packet. A successful exploit could allow the attacker to cause a DoS condition on the affected device.
Starting in Python 3.12.0, the asyncio._SelectorSocketTransport.writelines() method would not "pause" writing and signal to the Protocol to drain the buffer to the wire once the write buffer reached the "high-water mark". Because of this, Protocols would not periodically drain the write buffer potentially leading to memory exhaustion. This vulnerability likely impacts a small number of users, you must be using Python 3.12.0 or later, on macOS or Linux, using the asyncio module with protocols, and using .writelines() method which had new zero-copy-on-write behavior in Python 3.12.0 and later. If not all of these factors are true then your usage of Python is unaffected.
A vulnerability in the packet processing functionality of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to inefficient memory management. An attacker could exploit this vulnerability by sending a high rate of IPv4 or IPv6 traffic through an affected device. This traffic would need to match a configured block action in an access control policy. An exploit could allow the attacker to cause a memory exhaustion condition on the affected device, which would result in a DoS for traffic transiting the device, as well as sluggish performance of the management interface. Once the flood is stopped, performance should return to previous states.
A vulnerability in the IP fragment-handling implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a memory leak on an affected device. This memory leak could prevent traffic from being processed through the device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper error handling when specific failures occur during IP fragment reassembly. An attacker could exploit this vulnerability by sending crafted, fragmented IP traffic to a targeted device. A successful exploit could allow the attacker to continuously consume memory on the affected device and eventually impact traffic, resulting in a DoS condition. The device could require a manual reboot to recover from the DoS condition. Note: This vulnerability applies to both IP Version 4 (IPv4) and IP Version 6 (IPv6) traffic.
An issue was discovered in Samsung Mobile Processor, Wearable Processor and Modem Exynos 980, 990, 850, 1080, 9110, W920, W930, W1000 and Modem 5123. Incorrect handling of NAS Registration messages leads to a Denial of Service because of Improper Handling of Exceptional Conditions.