Jenkins Perfecto Plugin 1.17 and earlier executes a command on the Jenkins controller, allowing attackers with Job/Configure permission to run arbitrary commands on the Jenkins controller

A weakness has been identified in Tenda AC6 15.03.06.23. Affected by this vulnerability is the function formWifiApScan of the file /goform/WifiApScan of the component httpd. Executing a manipulation of the argument wl2g.public.country/wl5g.public.country can lead to os command injection. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks.

The Yale WIPC-303W 2.21 through 2.31 camera is vulnerable to remote command execution (RCE) through command injection via the HTTP API. NOTE: This may be a duplicate of CVE-2020-10176

A vulnerability was identified in Totolink WA300 5.2cu.7112_B20190227. Impacted is the function setWebWlanIdx of the file /cgi-bin/cstecgi.cgi of the component POST Request Handler. The manipulation of the argument webWlanIdx leads to command injection. The attack may be initiated remotely. The exploit is publicly available and might be used.

A vulnerability was determined in Edimax BR-6675nD 1.12. Affected is the function stainfo of the file /goform/stainfo. This manipulation of the argument interface causes command injection. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in r-huijts mcp-server-rijksmuseum up to 1.0.4. Affected is the function open_image_in_browser of the file src/index.ts of the component MCP Interface. Performing a manipulation of the argument imageUrl results in os command injection. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.

A weakness has been identified in Edimax BR-6428nC up to 1.16. This affects an unknown function of the file /goform/setWAN of the component Web Interface. This manipulation of the argument pppUserName/pptpUserName causes command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in Edimax BR-6208AC 1.02. The impacted element is the function setWAN of the file /goform/setWAN of the component L2TP Mode. The manipulation of the argument L2TPUserName results in command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in Wavlink NU516U1 M16U1_V240425. Affected by this issue is the function wan of the file /cgi-bin/adm.cgi. This manipulation of the argument ppp_username/ppp_passwd/rwan_ip/rwan_mask/rwan_gateway is directly passed by the attacker/so we can control the ppp_username/ppp_passwd/rwan_ip/rwan_mask/rwan_gateway causes os command injection. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure.

Jenkins Play Framework Plugin 1.0.2 and earlier lets users specify the path to the `play` command on the Jenkins master for a form validation endpoint, resulting in an OS command injection vulnerability exploitable by users able to store such a file on the Jenkins master.

A weakness has been identified in privsim mcp-test-runner 0.2.0. Impacted is the function child_process.spawn of the file src/index.ts of the component MCP Interface. Executing a manipulation of the argument command can lead to os command injection. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.

A flaw has been found in Wavlink NU516U1 240425. The impacted element is the function sys_login1 of the file /cgi-bin/login.cgi. Executing a manipulation of the argument ipaddr can lead to os command injection. The attack can be executed remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure.

A flaw has been found in kleneway awesome-cursor-mpc-server up to 2.0.1. Impacted is the function runCodeReviewTool of the file src/tools/codeReview.ts of the component Ccode-Review Tool. Executing a manipulation can lead to command injection. The attack may be launched remotely. The exploit has been published and may be used. The project was informed of the problem early through a pull request but has not reacted yet.

A weakness has been identified in Wavlink WL-WN570HA1 R70HA1 V1410_221110. This issue affects the function set_sys_adm of the file /cgi-bin/adm.cgi. This manipulation of the argument Username causes command injection. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. Once again the vendors acted very professional and confirms, "that the WN570HA1 firmware version R70HA1 V1410_221110 has been removed from our website." This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. It has been rated as critical. Affected by this issue is some unknown functionality of the component Web Management Interface. The manipulation of the argument suffix-rate-up leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-227654 is the identifier assigned to this vulnerability.

A vulnerability classified as critical has been found in mannaandpoem OpenManus up to 2025.3.13. This affects an unknown part of the file app/tool/python_execute.py of the component Prompt Handler. The manipulation leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tenda F456 1.0.0.5. This impacts the function FromWriteFacMac of the file /goform/WriteFacMac of the component httpd. The manipulation of the argument mac results in command injection. The attack can be executed remotely. The exploit has been made public and could be used.

DrayTek Vigor2960 1.5.1 allows remote command execution via shell metacharacters in a toLogin2FA action to mainfunction.cgi.

A vulnerability was found in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the component Web Management Interface. The manipulation of the argument name leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-227653 was assigned to this vulnerability.

A command injection vulnerability in the sandcat plugin of Caldera 2.3.1 and earlier allows authenticated attackers to execute any command or service.

A vulnerability was determined in AstrBotDevs AstrBot up to 4.22.1. Impacted is the function add_mcp_server of the file astrbot/dashboard/routes/tools.py of the component MCP Endpoint. This manipulation of the argument command causes command injection. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet.

A vulnerability was found in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. It has been classified as critical. Affected is an unknown function of the component Web Management Interface. The manipulation of the argument dpi leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-227652.

A vulnerability was found in 1Panel-dev MaxKB up to 2.6.1. The affected element is the function execute of the file apps/application/flow/step_node/mcp_node/impl/base_mcp_node.py of the component Model Context Protocol Node. Performing a manipulation results in os command injection. The attack is possible to be carried out remotely. The exploit has been made public and could be used. You should upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product.

A vulnerability has been found in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6 and classified as critical. This vulnerability affects unknown code of the component Web Management Interface. The manipulation of the argument ecn-down leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-227650 is the identifier assigned to this vulnerability.

A vulnerability, which was classified as critical, was found in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. This affects an unknown part of the component Web Management Interface. The manipulation of the argument ecn-up leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-227649 was assigned to this vulnerability.

The NDN-210 has a web administration panel which is made available over https. There is a command injection issue that will allow authenticated users to the administration panel to perform authenticated remote code execution. An issue exists in ngpsystemcmd.php in which the http parameters "x_modules" and "y_modules" are not properly handled. The NDN-210 is part of Barco TransForm N solution and this vulnerability is patched from TransForm N version 3.8 onwards.

GaussDB 200 with version of 6.5.1 have a command injection vulnerability. Due to insufficient input validation, remote attackers with low permissions could exploit this vulnerability by sending crafted commands to the affected device. Successful exploit could allow an attacker to execute commands.

A vulnerability was found in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6 and classified as critical. This issue affects some unknown processing of the component Web Management Interface. The manipulation of the argument src leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-227651.

Command Injection in Jfinal CMS v4.7.1 and earlier allows remote attackers to execute arbitrary code by uploading a malicious HTML template file via the component 'jfinal_cms/admin/filemanager/list'.

Command Injection in PHPMyWind v5.6 allows remote attackers to execute arbitrary code via the "text color" field of the component '/admin/web_config.php'.

TOTOLINK CPE CP900 V6.3c.1144_B20190715 was discovered to contain a command injection vulnerability in the setUploadUserData function via the FileName parameter. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

A weakness has been identified in Edimax EW-7438RPn 1.12. This affects the function formAccept of the file /goform/formAccep of the component POST Request Handler. This manipulation of the argument submit-url causes command injection. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Edimax BR-6228NC 1.22. Affected by this issue is the function mp of the file /goform/mp of the component POST Request Handler. The manipulation of the argument command results in command injection. The attack may be performed from remote. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical has been found in D-Link DIR-890L and DIR-806A1 up to 100CNb11/108B03. Affected is the function sub_175C8 of the file /htdocs/soap.cgi. The manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

GaussDB 200 with version of 6.5.1 have a command injection vulnerability. The software constructs part of a command using external input from users, but the software does not sufficiently validate the user input. Successful exploit could allow the attacker to inject certain commands.

EyesOfNetwork 5.1 allows Remote Command Execution via shell metacharacters in the module/tool_all/ host field.

A vulnerability was detected in pskill9 website-downloader up to 0.1.0. This affects the function download_website of the file src/index.ts of the component MCP Interface. Performing a manipulation of the argument outputPath results in os command injection. The attack may be initiated remotely. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet.

The Ping and Traceroute features on TP-Link TL-WR841N v13 00000001 0.9.1 4.16 v0001.0 Build 180119 Rel.65243n devices allow authenticated blind Command Injection.

A high severity vulnerability was found in all active versions of Red Hat CloudForms before 5.11.7.0. The out of band OS command injection vulnerability can be exploited by authenticated attacker while setuping conversion host through Infrastructure Migration Solution. This flaw allows attacker to execute arbitrary commands on CloudForms server.

aaPanel through 6.6.6 allows remote authenticated users to execute arbitrary commands via shell metacharacters in a modified /system?action=ServiceAdmin request (start, stop, or restart) to the setting menu of Sotfware Store.

Monstra CMS 3.0.4 allows an attacker, who already has administrative access to modify .chunk.php files on the Edit Chunk screen, to execute arbitrary OS commands via the Theme Module by visiting the admin/index.php?id=themes&action=edit_chunk URI. NOTE: there is no indication that the Edit Chunk feature was intended to prevent an administrator from using PHP's exec feature

D-Link DIR-865L Ax 1.20B01 Beta devices allow Command Injection.

sendfax.php in iFAX AvantFAX before 3.3.6 and HylaFAX Enterprise Web Interface before 0.2.5 allows authenticated Command Injection.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D6220 before 1.0.0.52, D6400 before 1.0.0.86, D7000v2 before 1.0.0.53, D8500 before 1.0.3.44, R6220 before 1.1.0.80, R6250 before 1.0.4.34, R6260 before 1.1.0.64, R6400 before 1.0.1.46, R6400v2 before 1.0.2.66, R6700 before 1.0.2.6, R6700v2 before 1.2.0.36, R6700v3 before 1.0.2.66, R6800 before 1.2.0.36, R6900 before 1.0.2.4, R6900P before 1.3.1.64, R6900v2 before 1.2.0.36, R7000 before 1.0.9.42, R7000P before 1.3.1.64, R7100LG before 1.0.0.50, R7300DST before 1.0.0.70, R7800 before 1.0.2.60, R7900 before 1.0.3.8, R7900P before 1.4.1.30, R8000 before 1.0.4.28, R8000P before 1.4.1.30, R8300 before 1.0.2.128, R8500 before 1.0.2.128, R8900 before 1.0.4.12, R9000 before 1.0.4.12, and XR500 before 2.3.2.32.

IntelMQ Manager from version 1.1.0 and before version 2.1.1 has a vulnerability where the backend incorrectly handled messages given by user-input in the "send" functionality of the Inspect-tool of the Monitor component. An attacker with access to the IntelMQ Manager could possibly use this issue to execute arbitrary code with the privileges of the webserver. Version 2.1.1 fixes the vulnerability.

A command injection on the /admin/broadcast.php script of Invigo Automatic Device Management (ADM) through 5.0 allows remote authenticated attackers to execute arbitrary PHP code on the server as the user running the application.

A vulnerability was found in Netgear WG302v2 up to 5.2.9 and classified as critical. Affected by this issue is the function ui_get_input_value. The manipulation of the argument host leads to command injection. The attack may be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

Artica Proxy 4.26 allows remote command execution for an authenticated user via shell metacharacters in the "Modify the hostname" field.

A remote code execution vulnerability was identified in GitHub Enterprise Server that could be exploited when building a GitHub Pages site. User-controlled configuration of the underlying parsers used by GitHub Pages were not sufficiently restricted and made it possible to execute commands on the GitHub Enterprise Server instance. To exploit this vulnerability, an attacker would need permission to create and build a GitHub Pages site on the GitHub Enterprise Server instance. This vulnerability affected all versions of GitHub Enterprise Server prior to 2.22.7 and was fixed in 2.22.7, 2.21.15, and 2.20.24. The underlying issues contributing to this vulnerability were identified through the GitHub Security Bug Bounty program.

iCatch DVR firmware before 20200103 do not validate function parameter properly, resulting attackers executing arbitrary command.