McAfee Enterprise Security Manager (ESM), Enterprise Security Manager/Log Manager (ESMLM), and Enterprise Security Manager/Receiver (ESMREC) before 9.3.2MR18, 9.4.x before 9.4.2MR8, and 9.5.x before 9.5.0MR7 allow remote authenticated users to execute arbitrary OS commands via a crafted filename, which is not properly handled when downloading the file.

baserCMS 3.0.2 through 3.0.8 allows remote authenticated users to execute arbitrary OS commands via unspecified vectors.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R6400v2 before 1.0.4.84, R6700 before 1.0.2.8, R6700v3 before 1.0.4.84, R6900 before 1.0.2.8, and R7900 before 1.0.3.10.

A security vulnerability has been detected in Trendnet TEW-657BRM 1.00.1. This impacts the function Edit of the file /setup.cgi. Such manipulation of the argument pcdb_list leads to os command injection. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. The vendor confirms, that "[t]he product in question (...) has been discontinued and end of life since June 23, 2011, that is more than 14 years ago. We no longer provide support for this product, so we are not able to confirm the vulnerabilities. We will make an announcement on our website's product support page and notify customers who registered their products with us." This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in 1Panel up to 1.10.1-lts. Affected by this issue is the function baseApi.UpdateDeviceSwap of the file /api/v1/toolbox/device/update/swap. The manipulation of the argument Path with the input 123123123\nopen -a Calculator leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-256304.

A weakness has been identified in Trendnet TEW-657BRM 1.00.1. This affects the function add_wps_client of the file /setup.cgi. This manipulation of the argument wl_enrolee_pin causes os command injection. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. The vendor confirms, that "[t]he product in question (...) has been discontinued and end of life since June 23, 2011, that is more than 14 years ago. We no longer provide support for this product, so we are not able to confirm the vulnerabilities. We will make an announcement on our website's product support page and notify customers who registered their products with us." This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in Tenda AC10 16.03.10.10_multi_TDE01. Affected is the function formAddMacfilterRule of the file /bin/httpd. Such manipulation leads to os command injection. It is possible to launch the attack remotely. Multiple endpoints might be affected.

SAP IDES ECC-systems contain code that permits the execution of arbitrary program code of user's choice.An attacker can therefore control the behaviour of the system by executing malicious code which can potentially escalate privileges with low impact on confidentiality, integrity and availability of the system.

Zyxel VMG5313-B30B router on firmware 5.13(ABCJ.6)b3_1127, and possibly older versions of firmware are affected by shell injection.

A security vulnerability has been detected in MoussaabBadla code-screenshot-mcp up to 0.1.0. This affects an unknown part of the component HTTP Interface. Such manipulation leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in Trendnet TEW-657BRM 1.00.1. Affected by this vulnerability is the function vpn_connect of the file /setup.cgi. Executing a manipulation of the argument policy_name can lead to os command injection. The attack can be executed remotely. The exploit has been published and may be used. The vendor confirms, that "[t]he product in question (...) has been discontinued and end of life since June 23, 2011, that is more than 14 years ago. We no longer provide support for this product, so we are not able to confirm the vulnerabilities. We will make an announcement on our website's product support page and notify customers who registered their products with us." This vulnerability only affects products that are no longer supported by the maintainer.

An unspecified script in the web interface in Cisco Firepower Extensible Operating System 1.1(1.160) on Firepower 9000 devices allows remote authenticated users to execute arbitrary OS commands via crafted parameters, aka Bug ID CSCux10622.

A vulnerability was detected in Trendnet TEW-657BRM 1.00.1. Affected is the function ping_test of the file /setup.cgi. Performing a manipulation of the argument c4_IPAddr results in os command injection. Remote exploitation of the attack is possible. The exploit is now public and may be used. The vendor confirms, that "[t]he product in question (...) has been discontinued and end of life since June 23, 2011, that is more than 14 years ago. We no longer provide support for this product, so we are not able to confirm the vulnerabilities. We will make an announcement on our website's product support page and notify customers who registered their products with us." This vulnerability only affects products that are no longer supported by the maintainer.

eventapp/lib/gcloud.rb in the ISUCON5 qualifier portal (aka eventapp) web application before 2015-10-30 makes improper popen calls, which allows remote attackers to execute arbitrary commands via an HTTP request that includes shell metacharacters in an argument to a "gcloud compute" command.

Jenkins Play Framework Plugin 1.0.2 and earlier lets users specify the path to the `play` command on the Jenkins master for a form validation endpoint, resulting in an OS command injection vulnerability exploitable by users able to store such a file on the Jenkins master.

A weakness has been identified in Totolink A3300R 17.0.0cu.557_b20221024. This issue affects the function setUPnPCfg of the file /cgi-bin/cstecgi.cgi. This manipulation of the argument enable causes command injection. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks.

A vulnerability was identified in TRENDnet TEW-713RE up to 1.02. The impacted element is an unknown function of the file /goform/setSysAdm. The manipulation of the argument admuser leads to command injection. The attack can be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Totolink A3600R 4.1.2cu.5182_B20201102. Affected by this issue is the function setNoticeCfg of the file /cgi-bin/cstecgi.cgi of the component Parameter Handler. The manipulation of the argument NoticeUrl results in command injection. The attack may be launched remotely. The exploit is now public and may be used.

The OBS service obs-service-download_url was vulnerable to a command injection vulnerability. The attacker could provide a configuration to the service that allowed to execute command in later steps

A vulnerability was determined in TRENDnet TEW-713RE up to 1.02. The affected element is the function sub_421494 of the file /goform/addRouting. Executing a manipulation of the argument dest can lead to command injection. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

DrayTek Vigor2960 1.5.1 allows remote command execution via shell metacharacters in a toLogin2FA action to mainfunction.cgi.

A weakness has been identified in Totolink A3300R 17.0.0cu.557_b20221024. Affected by this vulnerability is the function setWiFiBasicCfg of the file /cgi-bin/cstecgi.cgi. Executing a manipulation of the argument rxRate can lead to command injection. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks.

A security flaw has been discovered in Totolink A3300R 17.0.0cu.557_b20221024. This vulnerability affects the function setSmartQosCfg of the file /cgi-bin/cstecgi.cgi of the component Parameter Handler. The manipulation of the argument qos_up_bw results in command injection. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks.

A security vulnerability has been detected in Totolink A3300R 17.0.0cu.557_b20221024. Impacted is the function setStaticRoute of the file /cgi-bin/cstecgi.cgi. Such manipulation of the argument ip leads to command injection. The attack may be performed from remote. The exploit has been disclosed publicly and may be used.

A security vulnerability has been detected in Totolink A3300R 17.0.0cu.557_b20221024. Affected by this issue is the function setIptvCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument vlanPriLan3 leads to command injection. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used.

A vulnerability was detected in Totolink A3300R 17.0.0cu.557_b20221024. The affected element is the function setVpnPassCfg of the file /cgi-bin/cstecgi.cgi of the component Parameter Handler. Performing a manipulation of the argument pptpPassThru results in command injection. It is possible to initiate the attack remotely. The exploit is now public and may be used.

A security flaw has been discovered in efforthye fast-filesystem-mcp up to 3.5.1. The affected element is the function handleGetDiskUsage of the file src/index.ts. Performing a manipulation results in command injection. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.

A vulnerability was found in D-Link DI-7400G+ 19.12.25A1. This affects an unknown function of the file /msp_info.htm?flag=cmd. The manipulation of the argument cmd results in command injection. The attack can be launched remotely. The exploit has been made public and could be used.

A vulnerability was identified in Totolink A3300R 17.0.0cu.557_b20221024. This affects the function setLanCfg of the file /cgi-bin/cstecgi.cgi of the component Parameter Handler. The manipulation of the argument lanIp leads to command injection. Remote exploitation of the attack is possible. The exploit is publicly available and might be used.

A command injection vulnerability in the sandcat plugin of Caldera 2.3.1 and earlier allows authenticated attackers to execute any command or service.

A flaw has been found in Tenda CH22 1.0.0.1. The affected element is the function FormWriteFacMac of the file /goform/WriteFacMac. Executing a manipulation of the argument mac can lead to command injection. The attack may be launched remotely. The exploit has been published and may be used.

A vulnerability has been found in Totolink NR1800X 9.1.0u.6279_B20210910. This issue affects the function NTPSyncWithHost of the file /cgi-bin/cstecgi.cgi of the component Telnet Service. The manipulation of the argument host_time leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

Command Injection in PHPMyWind v5.6 allows remote attackers to execute arbitrary code via the "text color" field of the component '/admin/web_config.php'.

Command Injection in Jfinal CMS v4.7.1 and earlier allows remote attackers to execute arbitrary code by uploading a malicious HTML template file via the component 'jfinal_cms/admin/filemanager/list'.

Two OS command injection vulnerabilities in the User Portal of Sophos XG Firewall through 2020-08-05 potentially allow an authenticated attacker to remotely execute arbitrary code.

A vulnerability was detected in pskill9 website-downloader up to 0.1.0. This affects the function download_website of the file src/index.ts of the component MCP Interface. Performing a manipulation of the argument outputPath results in os command injection. The attack may be initiated remotely. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet.

GaussDB 200 with version of 6.5.1 have a command injection vulnerability. The software constructs part of a command using external input from users, but the software does not sufficiently validate the user input. Successful exploit could allow the attacker to inject certain commands.

A vulnerability has been found in JD Cloud BE6500 4.4.1.r4308. This issue affects the function sub_4780 of the file /jdcapi. Such manipulation of the argument ddns_name leads to command injection. The attack may be performed from remote. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

The Web UI in IBM Security QRadar SIEM 7.1.x before 7.1 MR2 Patch 12 allows remote authenticated users to execute unspecified OS commands via unknown vectors.

The NDN-210 has a web administration panel which is made available over https. There is a command injection issue that will allow authenticated users to the administration panel to perform authenticated remote code execution. An issue exists in split_card_cmd.php in which the http parameter "locking" is not properly handled. The NDN-210 is part of Barco TransForm N solution and this vulnerability is patched from TransForm N version 3.8 onwards.

Barco TransForm N before 3.8 allows Command Injection (issue 2 of 4). The NDN-210 has a web administration panel which is made available over https. There is a command injection issue that will allow authenticated users of the administration panel to perform authenticated remote code execution. An issue exists in split_card_cmd.php in which the http parameters xmodules, ymodules and savelocking are not properly handled. The NDN-210 is part of Barco TransForm N solution and includes the patch from TransForm N version 3.8 onwards.

Watchguard XCS 9.2 and 10.0 before build 150522 allow remote authenticated users to execute arbitrary commands via shell metacharacters in the id parameter to ADMIN/mailqueue.spl.

rubygem-openshift-origin-console in Red Hat OpenShift 2.2 allows remote authenticated users to execute arbitrary commands via a crafted request to the Broker.

A security flaw has been discovered in Tenda F453 1.0.0.3. The affected element is the function FormWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac results in command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was found in ZSPACE Z4Pro+ 1.0.0440024. Impacted is the function zfilev2_api_SafeStatus of the file /v2/file/safe/status of the component HTTP POST Request Handler. The manipulation results in command injection. The attack may be performed from remote. The exploit has been made public and could be used. The vendor was contacted early about this disclosure.

In the git-tag-annotation-action (open source GitHub Action) before version 1.0.1, an attacker can execute arbitrary (*) shell commands if they can control the value of [the `tag` input] or manage to alter the value of [the `GITHUB_REF` environment variable]. The problem has been patched in version 1.0.1. If you don't use the `tag` input you are most likely safe. The `GITHUB_REF` environment variable is protected by the GitHub Actions environment so attacks from there should be impossible. If you must use the `tag` input and cannot upgrade to `> 1.0.0` make sure that the value is not controlled by another Action.

A vulnerability was found in Wavlink WL-WN578W2 221110. The impacted element is an unknown function of the file /cgi-bin/firewall.cgi of the component POST Request Handler. Performing a manipulation of the argument dmz_flag/del_flag results in command injection. It is possible to initiate the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A high severity vulnerability was found in all active versions of Red Hat CloudForms before 5.11.7.0. The out of band OS command injection vulnerability can be exploited by authenticated attacker while setuping conversion host through Infrastructure Migration Solution. This flaw allows attacker to execute arbitrary commands on CloudForms server.

A vulnerability classified as critical was found in Overtek OT-E801G OTE801G65.1.1.0. This vulnerability affects unknown code of the file /diag_ping.cmd?action=test&interface=ppp0.1&ipaddr=8.8.8.8%26%26cat%20/etc/passwd&ipversion=4&sessionKey=test. The manipulation leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tenda W6-S 1.0.0.4(510). This affects the function TendaAte of the file /goform/ate of the component ATE Service. Performing a manipulation results in os command injection. The attack may be initiated remotely. The exploit has been made public and could be used.