A vulnerability was found in Edimax BR-6428NS 1.10. This issue affects the function formStaDrvSetup of the file /goform/formStaDrvSetup of the component POST Request Handler. Performing a manipulation of the argument stadrv_ssid results in command injection. The attack can be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in Edimax BR-6428NS 1.10. This impacts the function system of the file /goform/formWlanM of the component POST Request Handler. Executing a manipulation of the argument ateFunc/ateGain/ateTxCount/ateChan/ateRate/ateMacID/e2pTxPower1/e2pTxPower2/e2pTxPower3/e2pTxPower4/e2pTxPower5/e2pTxPower6/e2pTxPower7/e2pTx2Power1/e2pTx2Power2/e2pTx2Power3/e2pTx2Power4/e2pTx2Power5/e2pTx2Power6/e2pTx2Power7/ateTxFreqOffset/ateMode/ateBW/ateAntenna/e2pTxFreqOffset/e2pTxPwDeltaB/e2pTxPwDeltaG/e2pTxPwDeltaMix/e2pTxPwDeltaN/readE2P can lead to command injection. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in Edimax BR-6428NS 1.10. Affected is the function formWlbasic of the file /goform/formWlbasic of the component POST Request Handler. The manipulation of the argument repeaterSSID leads to command injection. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in Edimax EW-7438RPn up to 1.31. The affected element is the function formWpsStart of the file /goform/formWpsStart of the component webs. This manipulation of the argument pinCode causes os command injection. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Edimax EW-7438RPn up to 1.31. Affected is the function formWizSurvey of the file /goform/formWizSurvey of the component webs. The manipulation of the argument ip/mask/gateway leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Edimax EW-7438RPn 1.28a. Affected by this vulnerability is the function formHwSet of the file /goform/formHwSet of the component POST Request Handler. The manipulation of the argument Anntena/Mcs/regDomain/nic0Addr/nic1Addr/wlanAddr/wanAddr/wlanSSID/wlanChan/comd/initgain/txcck/txofdm leads to command injection. The attack can be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in Edimax EW-7438RPn 1.12. This affects the function formAccept of the file /goform/formAccep of the component POST Request Handler. This manipulation of the argument submit-url causes command injection. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in Edimax EW-7438RPn 1.12. This vulnerability affects the function formConnectionSetting of the file /goform/formConnectionSetting of the component Setting Handler. Such manipulation of the argument max_Conn/timeOut leads to command injection. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Edimax EW-7438RPn 1.12. This issue affects the function formEZCHNwlanSetup of the file /goform/formEZCHNwlanSetu of the component POST Request Handler. Performing a manipulation of the argument method results in command injection. Remote exploitation of the attack is possible. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in Edimax BR-6675nD 1.12. This affects the function formHwSet of the file /goform/formHwSet of the component POST Request Handler. The manipulation of the argument regDomain/ABandregDomain/nic0Addr/nic1Addr/wlanAddr/inicAddr results in command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in Edimax BR-6675nD 1.12. This impacts the function formWpsStart of the file /goform/formWpsStart of the component POST Request Handler. This manipulation of the argument pinCode causes command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Edimax BR-6675nD 1.12. The affected element is the function formWlanMP of the file /goform/formWlanMP of the component POST Request Handler. The manipulation of the argument ateFunc/ateGain/ateRate/ateChan/ateTxCount/e2pTx2Power1/e2pTx2Power2/e2pTx2Power3/e2pTx2Power4/e2pTx2Power5/e2pTx2Power6/e2pTx2Power7/e2pTxPower1/e2pTxPower2/e2pTxPower3/e2pTxPower4/e2pTxPower5/e2pTxPower6/e2pTxPower7/ateTxFreqOffset/ateMode/ateMacID/ateBW/ateAntenna/e2pTxFreqOffset/e2pTxPwDeltaB/e2pTxPwDeltaG/e2pTxPwDeltaMix/readE2P/e2pTxPwDeltaN results in command injection. The attack can be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in Edimax EW-7438RPn 1.31. The affected element is the function formWlanMP of the file /goform/formWlanMP of the component Content-Type Handler. Executing a manipulation of the argument ateFunc/ateGain/ateTxCount/ateChan/ateRate/ateMacID/e2pTxPower1/e2pTxPower2/e2pTxPower3/e2pTxPower4/e2pTxPower5/e2pTxPower6/e2pTxPower7/e2pTx2Power1/e2pTx2Power2/e2pTx2Power3/e2pTx2Power4/e2pTx2Power5/e2pTx2Power6/e2pTx2Power7/ateTxFreqOffset/ateMode/ateBW/ateAntenna/e2pTxFreqOffset/e2pTxPwDeltaB/e2pTxPwDeltaG/e2pTxPwDeltaMix/e2pTxPwDeltaN/readE2P can lead to os command injection. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Edimax BR-6478AC 1.23. Affected by this vulnerability is the function formAccept of the file /goform/formAccept of the component POST Request Handler. Such manipulation of the argument submit-url leads to command injection. It is possible to launch the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in Edimax BR-6675nD 1.12. Affected is the function stainfo of the file /goform/stainfo. This manipulation of the argument interface causes command injection. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in Edimax BR-6208AC 1.02. The impacted element is the function setWAN of the file /goform/setWAN of the component L2TP Mode. The manipulation of the argument L2TPUserName results in command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in Edimax BR-6428nC up to 1.16. This affects an unknown function of the file /goform/setWAN of the component Web Interface. This manipulation of the argument pppUserName/pptpUserName causes command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Edimax BR-6228NC 1.22. Affected by this issue is the function mp of the file /goform/mp of the component POST Request Handler. The manipulation of the argument command results in command injection. The attack may be performed from remote. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in Edimax BR-6478AC 1.23. Affected by this issue is the function formiNICbasic of the file /goform/formiNICbasic of the component POST Request Handler. Performing a manipulation of the argument rootAPmac results in command injection. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in Edimax BR-6675nD 1.12. This issue affects the function formUSBStorage of the file /goform/formUSBStorage of the component POST Request Handler. Executing a manipulation of the argument sub_dir can lead to command injection. It is possible to launch the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in Edimax EW-7478APC 1.04. The affected element is the function formAccept of the file /goform/formAccept of the component POST Request Handler. The manipulation of the argument submit-url leads to os command injection. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Edimax EW-7478APC 1.04. This vulnerability affects the function formStaDrvSetup of the file /goform/formStaDrvSetup of the component POST Request Handler. The manipulation of the argument rootAPmac results in os command injection. The attack can be executed remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Edimax BR-6478AC V2 1.23. This affects the function setWAN of the file /goform/setWAN of the component POST Request Handler. The manipulation of the argument pppUserName/pptpUserName/L2TPUserName results in command injection. It is possible to launch the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in Edimax BR-6478AC V2 1.23. This impacts the function stainfo of the file /goform/stainfo of the component POST Request Handler. This manipulation of the argument interface causes command injection. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Edimax BR-6478AC V2 1.23. Affected is the function wiz_5in1_redirect of the file /goform/wiz_5in1_redirect of the component POST Request Handler. Such manipulation of the argument newpass leads to command injection. The attack can be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in Edimax BR-6478AC V2 1.23. Affected by this vulnerability is the function mp of the file /goform/mp of the component POST Request Handler. Performing a manipulation of the argument command results in command injection. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in Edimax BR-6478AC 1.23. This affects the function formStaDrvSetup of the file /goform/formStaDrvSetup of the component POST Request Handler. This manipulation of the argument rootAPmac causes command injection. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks.

A vulnerability was determined in Edimax BR-6478AC 1.23. The affected element is the function formWlbasic of the file /goform/formWlbasic of the component POST Request Handler. This manipulation of the argument rootAPmac causes command injection. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized.

A security flaw has been discovered in Edimax BR-6675nD 1.12. Impacted is the function mp of the file /goform/mp of the component POST Request Handler. Performing a manipulation of the argument command results in command injection. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Edimax BR-6208AC 1.02/1.03. Affected is the function formStaDrvSetup of the file /goform/formStaDrvSetup of the component Web-based Configuration Interface. The manipulation of the argument rootAPmac leads to command injection. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. Edimax confirms this issue: "The product mentioned, EDIMAX BR-6208AC V2, has reached its End of Life (EOL) status. It is no longer supported or maintained by Edimax, and it is no longer available for purchase in the market. Consequently, there will be no further firmware updates or patches for this device. We recommend users upgrade to newer models for better security." This vulnerability only affects products that are no longer supported by the maintainer.

A security flaw has been discovered in Edimax BR-6208AC 1.02/1.03. Affected by this vulnerability is the function formRoute of the file /gogorm/formRoute of the component Web-based Configuration Interface. The manipulation of the argument strIp/strMask/strGateway results in command injection. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. Edimax confirms this issue: "The product mentioned, EDIMAX BR-6208AC V2, has reached its End of Life (EOL) status. It is no longer supported or maintained by Edimax, and it is no longer available for purchase in the market. Consequently, there will be no further firmware updates or patches for this device. We recommend users upgrade to newer models for better security." This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was detected in Edimax BR-6478AC V3 1.0.15. Impacted is the function sub_416990 of the file /boafrm/formTracerouteDiagnosticRun. The manipulation of the argument host results in os command injection. The attack can be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in Edimax BR-6478AC V3 1.0.15. The affected element is the function sub_44CCE4 of the file /boafrm/formSysCmd. This manipulation of the argument sysCmd causes os command injection. The attack may be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in Edimax BR-6478AC V3 1.0.15. This issue affects the function sub_416898 of the file /boafrm/formDebugDiagnosticRun. The manipulation of the argument host leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Edimax IC-7100 does not properly neutralize requests. An attacker can create specially crafted requests to achieve remote code execution on the device

A vulnerability was found in Edimax IC-6220DC and IC-5150W up to 3.06. It has been rated as critical. Affected by this issue is the function cgiFormString of the file ipcam_cgi. The manipulation of the argument host leads to command injection. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An OS command injection vulnerability exists in the Edimax EW-7438RPn Mini firmware version 1.13 and prior via the syscmd.asp form handler. The /goform/formSysCmd endpoint exposes a system command interface through the sysCmd parameter. A remote authenticated attacker can submit arbitrary shell commands directly, resulting in command execution as the root user. Exploitation evidence was observed by the Shadowserver Foundation on 2024-09-14 UTC.

An OS command injection vulnerability exists in the Edimax EW-7438RPn firmware version 1.13 and prior via the mp.asp form handler. The /goform/mp endpoint improperly handles user-supplied input to the command parameter. An authenticated attacker can inject shell commands using shell metacharacters to achieve arbitrary command execution as the root user. Exploitation evidence was observed by the Shadowserver Foundation on 2024-09-14 UTC.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R6400 before 1.0.1.50, R7900P before 1.4.1.50, R8000P before 1.4.1.50, RAX75 before 1.0.1.62, and RAX80 before 1.0.1.62.

A vulnerability has been found in DTStack Taier 1.4.0. This affects the function Runtime.exec of the component REST API. The manipulation of the argument sqlText leads to os command injection. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Totolink CA750-PoE 6.2c.510. This affects the function setWebWlanIdx of the file /cgi-bin/cstecgi.cgi of the component Setting Handler. Such manipulation of the argument webWlanIdx leads to os command injection. It is possible to launch the attack remotely. The exploit is publicly available and might be used.

A security flaw has been discovered in Totolink CA750-PoE 6.2c.510. This vulnerability affects the function setPasswordCfg of the file /cgi-bin/cstecgi.cgi of the component Setting Handler. Performing a manipulation of the argument admuser/admpass results in os command injection. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks.

A weakness has been identified in Totolink CA750-PoE 6.2c.510. This issue affects the function NTPSyncWithHost of the file /cgi-bin/cstecgi.cgi of the component Setting Handler. Executing a manipulation of the argument host_time can lead to os command injection. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks.

A security vulnerability has been detected in Totolink CA750-PoE 6.2c.510. Impacted is the function setNetworkDiag of the file /cgi-bin/cstecgi.cgi of the component Setting Handler. The manipulation of the argument NetDiagHost/NetDiagPingNum/NetDiagPingSize/NetDiagPingTimeOut/NetDiagTracertHop is directly passed by the attacker/so we can control the NetDiagHost/NetDiagPingNum/NetDiagPingSize/NetDiagPingTimeOut/NetDiagTracertHop leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used.

A vulnerability was detected in Totolink CA750-PoE 6.2c.510. The affected element is the function setUnloadUserData of the file /cgi-bin/cstecgi.cgi of the component Setting Handler. The manipulation of the argument plugin_version results in os command injection. The attack may be launched remotely. The exploit is now public and may be used.

A weakness has been identified in Totolink CA750-PoE 6.2c.510. Impacted is the function setUpgradeUboot of the file /cgi-bin/cstecgi.cgi of the component Setting Handler. This manipulation of the argument FileName causes os command injection. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks.

A security vulnerability has been detected in Totolink CA750-PoE 6.2c.510. The affected element is the function setUploadUserData of the file /cgi-bin/cstecgi.cgi of the component Setting Handler. Such manipulation of the argument FileName leads to os command injection. The attack may be performed from remote. The exploit has been disclosed publicly and may be used.

A vulnerability was detected in Totolink CA750-PoE 6.2c.510. The impacted element is the function recvUpgradeNewFw of the file /cgi-bin/cstecgi.cgi of the component Setting Handler. Performing a manipulation of the argument fwUrl/magicid results in os command injection. It is possible to initiate the attack remotely. The exploit is now public and may be used.

A flaw has been found in Totolink CA750-PoE 6.2c.510. This affects the function setWiFiWpsConfig of the file /cgi-bin/cstecgi.cgi of the component Setting Handler. Executing a manipulation of the argument PIN can lead to os command injection. It is possible to launch the attack remotely. The exploit has been published and may be used.

A vulnerability was determined in haojing8312 WorkClaw up to 0.6.4. This affects the function is_dangerous of the file apps/runtime/src-tauri/src/agent/tools/bash.rs of the component Blacklist Handler. Executing a manipulation can lead to os command injection. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet.