SFCB (Small Footprint CIM Broker) as used in ESXi has an authentication bypass vulnerability. A malicious actor with network access to port 5989 on ESXi may exploit this issue to bypass SFCB authentication by sending a specially crafted request.

In github.com/kongchuanhujiao/server before version 1.3.21 there is an authentication Bypass by Primary Weakness vulnerability. All users are impacted. This is fixed in version 1.3.21.

Improper host authentication vulnerability in wolfSSH version 1.4.20 and earlier clients that allows authentication bypass and leaking of clients credentials.

TM2 Monitoring v3.04 contains an authentication bypass and plaintext credential disclosure.

An issue in Fossorial fosrl/pangolin v.1.6.2 and before allows a remote attacker to escalate privileges via the 2FA component

A vulnerability, which was classified as critical, was found in quequnlong shiyi-blog up to 1.2.1. Affected is an unknown function of the file /api/sys/user/verifyPassword/ of the component Administrator Backend. The manipulation leads to improper authentication. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities exist in the web-based management interface of Cisco Small Business RV Series Routers. A remote attacker could execute arbitrary commands or bypass authentication and upload files on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability was found in Netgear WNR614 1.1.0.28_1.0.1WW. It has been classified as critical. This affects an unknown part of the component URL Handler. The manipulation with the input %00currentsetting.htm leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This issue appears to have been circulating as an 0day since 2024.

SMB Server might be susceptible to relay attacks depending on the configuration. An attacker who successfully exploited these vulnerabilities could perform relay attacks and make the users subject to elevation of privilege attacks. The SMB Server already supports mechanisms for hardening against relay attacks: SMB Server signing SMB Server Extended Protection for Authentication (EPA) Microsoft is releasing this CVE to provide customers with audit capabilities to help them to assess their environment and to identify any potential device or software incompatibility issues before deploying SMB Server hardening measures that protect against relay attacks. If you have not already enabled SMB Server hardening measures, we advise customers to take the following actions to be protected from these relay attacks: Assess your environment by utilizing the audit capabilities that we are exposing in the September 2025 security updates. See Support for Audit Events to deploy SMB Server Hardening—SMB Server Signing & SMB Server EPA. Adopt appropriate SMB Server hardening measures.

Meshtastic is an open source mesh networking solution. Prior to v2.6.3, an attacker can send NodeInfo with a empty publicKey first, then overwrite it with a new key. First sending a empty key bypasses 'if (p.public_key.size > 0) {', clearing the existing publicKey (and resetting the size to 0) for a known node. Then a new key bypasses 'if (info->user.public_key.size > 0) {', and this malicious key is stored in NodeDB. This vulnerability is fixed in 2.6.3.

Azure Entra ID Elevation of Privilege Vulnerability

A command execution vulnerability in SonicWall GMS 9.3 allows a remote unauthenticated attacker to locally escalate privilege to root.

OpenVPN Access Server 2.8.x before 2.8.1 allows LDAP authentication bypass (except when a user is enrolled in two-factor authentication).

An issue was discovered on D-Link DSL-2640B B2 EU_4.01B devices. Authentication can be bypassed when accessing cgi modules. This allows one to perform administrative tasks (e.g., modify the admin password) with no authentication.

Huawei AR3200 products with versions of V200R007C00SPC900, V200R007C00SPCa00, V200R007C00SPCb00, V200R007C00SPCc00, V200R009C00SPC500 have an improper authentication vulnerability. Attackers need to perform some operations to exploit the vulnerability. Successful exploit may obtain certain permissions on the device.

An improper authentication vulnerability in FortiMail 5.4.10, 6.0.7, 6.2.2 and earlier and FortiVoiceEntreprise 6.0.0 and 6.0.1 may allow a remote unauthenticated attacker to access the system as a legitimate user by requesting a password change via the user interface.

A flaw has been found in 70mai X200 up to 20251010. Affected is an unknown function of the component Pairing. Executing manipulation can lead to missing authentication. It is possible to launch the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability in Trend Micro InterScan Web Security Virtual Appliance 6.5 may allow remote attackers to bypass authentication on affected installations of Trend Micro InterScan Web Security Virtual Appliance.

A vulnerability in Trend Micro InterScan Web Security Virtual Appliance 6.5 SP2 could allow an attacker to manipulate system updates using a combination of CSRF bypass (CVE-2020-8461) and authentication bypass (CVE-2020-8464) to execute code as user root.

An issue was discovered in phpABook 0.9 Intermediate. On the login page, if one sets a userInfo cookie with the value of admin+1+en (user+perms+lang), one can login as any user without a password.

The Time Capsule plugin before 1.21.16 for WordPress has an authentication bypass. Any request containing IWP_JSON_PREFIX causes the client to be logged in as the first account on the list of administrator accounts.

eG Manager 7.1.2 allows authentication bypass via a com.egurkha.EgLoginServlet?uname=admin&upass=&accessKey=eGm0n1t0r request.

The server management software module of ZTE has an authentication issue vulnerability, which allows users to skip the authentication of the server and execute some commands for high-level users. This affects: <R5300G4V03.08.0100/V03.07.0300/V03.07.0200/V03.07.0108/V03.07.0100/V03.05.0047/V03.05.0046/V03.05.0045/V03.05.0044/V03.05.0043/V03.05.0040/V03.04.0020;R8500G4V03.07.0103/V03.07.0101/V03.06.0100/V03.05.0400/V03.05.0020;R5500G4V03.08.0100/V03.07.0200/V03.07.0100/V03.06.0100>

In TOTOLINK EX1200T firmware 4.1.2cu.5215, an attacker can bypass login by sending a specific request through formLoginAuth.htm.

CWE-287: Improper Authentication vulnerability exists which could cause the execution of commands on the webserver without authentication when sending specially crafted HTTP requests.

A security vulnerability has been identified in the HPE Edgeline Infrastructure Manager, also known as HPE Edgeline Infrastructure Management Software. The vulnerability could be remotely exploited to bypass remote authentication leading to execution of arbitrary commands, gaining privileged access, causing denial of service, and changing the configuration.

SSMC3.7.0.0 is vulnerable to remote authentication bypass. HPE StoreServ Management Console (SSMC) 3.7.0.0 is an off node multiarray manager web application and remains isolated from data on the managed arrays. HPE has provided an update to HPE StoreServ Management Console (SSMC) software 3.7.0.0* Upgrade to HPE 3PAR StoreServ Management Console 3.7.1.1 or later.

An authentication bypass vulnerability in the /web/um_open_telnet.cgi endpoint in Nexxt Solutions NCM-X1800 Mesh Router firmware UV1.2.7 and below, allowing an attacker to remotely enable the Telnet service without authentication, bypassing security controls. The Telnet server is then accessible with hard-coded credentials, allowing attackers to gain administrative shell access and execute arbitrary commands on the device.

An issue in Roadcute API v.1 allows a remote attacker to execute arbitrary code via the application exposing a password reset API endpoint that fails to validate the identity of the requester properly

[Calendar01], [Calendar02], [PKOBO-News01], [PKOBO-vote01], [Telop01], [Gallery01], [CalendarForm01], and [Link01] [Calendar01] free edition ver1.0.0, [Calendar02] free edition ver1.0.0, [PKOBO-News01] free edition ver1.0.3 and earlier, [PKOBO-vote01] free edition ver1.0.1 and earlier, [Telop01] free edition ver1.0.0, [Gallery01] free edition ver1.0.3 and earlier, [CalendarForm01] free edition ver1.0.3 and earlier, and [Link01] free edition ver1.0.0 allows remote attackers to bypass authentication and log in to the product with administrative privileges via unspecified vectors.

MAGMI versions prior to 0.7.24 are vulnerable to a remote authentication bypass due to allowing default credentials in the event there is a database connection failure. A remote attacker can trigger this connection failure if the Mysql setting max_connections (default 151) is lower than Apache (or another web server) setting MaxRequestWorkers (formerly MaxClients) (default 256). This can be done by sending at least 151 simultaneous requests to the Magento website to trigger a "Too many connections" error, then use default magmi:magmi basic authentication to remotely bypass authentication.

sphider prior to 1.3.6, sphider-pro prior to 3.2, and sphider-plus prior to 3.2 allow authentication bypass

JeeWMS 771e4f5d0c01ffdeae1671be4cf102b73a3fe644 (2025-05-19) contains incorrect authentication bypass vulnerability, which can lead to arbitrary file reading.

IBM InfoSphere Data Replication 11.4 and IBM InfoSphere Change Data Capture for z/OS 10.2.1, under certain configurations, could allow a user to bypass authentication mechanisms using an empty password string. IBM X-Force ID: 189834

Improper Authentication vulnerability in Apache Software Foundation Apache Accumulo. This issue affects Apache Accumulo: 2.1.0. Accumulo 2.1.0 contains a defect in the user authentication process that may succeed when invalid credentials are provided. Users are advised to upgrade to 2.1.1.

IBM Connect:Direct for UNIX 6.1.0, 6.0.0, 4.3.0, and 4.2.0 can allow a local or remote user to obtain an authenticated CLI session due to improper authentication methods. IBM X-Force ID: 188516.

IBM Cognos Controller 10.4.0, 10.4.1, and 10.4.2 could allow a remote attacker to bypass security restrictions, caused by improper validation of authentication cookies. IBM X-Force ID: 190847.

IBM Data Risk Manager 2.0.1, 2.0.2, 2.0.3, 2.0.4, 2.0.5, and 2.0.6 could allow a remote attacker to bypass security restrictions when configured with SAML authentication. By sending a specially crafted HTTP request, an attacker could exploit this vulnerability to bypass the authentication process and gain full administrative access to the system. IBM X-Force ID: 180532.

DVR firmware in TAT-76 and TAT-77 series of products, provided by TONNET, contain misconfigured authentication mechanism. Attackers can crack the default password and gain access to the system.

DataEase is an open source business intelligence and data visualization tool. Prior to version 2.10.10, secret verification does not take effect successfully, so a user can use any secret to forge a JWT token. The vulnerability has been fixed in v2.10.10. No known workarounds are available.

A vulnerability, which was classified as very critical, was found in Netgear DGND3700 1.1.00.15_1.00.15NA. This affects an unknown part of the file /BRS_top.html of the component Basic Authentication. The manipulation leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. Other products might be affected as well. The vendor was contacted early about this disclosure.

OpenPAM Nummularia 9.2 through 10.0 does not properly handle the error reported when an include directive refers to a policy that does not exist, which causes the loaded policy chain to no be discarded and allows context-dependent attackers to bypass authentication via a login (1) without a password or (2) with an incorrect password.

ControlID iDSecure On-premises versions 4.7.48.0 and prior are vulnerable to an improper authentication vulnerability which could allow an attacker to bypass authentication and gain permissions in the product.

An attacker of Secrets Manager, Self-Hosted installations that route traffic from Secrets Manager to AWS through a misconfigured network device can reroute authentication requests to a malicious server under the attacker’s control. CyberArk believes there to be very few installations where this issue can be actively exploited, though Secrets Manager, Self-Hosted (formerly Conjur Enterprise) prior to versions 13.5.1 and 13.6.1 and Conjur OSS prior to version 1.22.1 may be affected. Conjur OSS version 1.22.1 and Secrets Manager, Self-Hosted versions 13.5.1 and 13.6.1 fix the issue.

The MoreConvert Pro plugin for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 1.9.14. This is due to the guest waitlist verification flow not invalidating or regenerating verification tokens when the customer email address is changed. This makes it possible for unauthenticated attackers to authenticate as existing users, including administrators, by obtaining a valid guest verification token for an attacker-controlled email, changing the same guest customer email to the target account email through the public waitlist flow, and then using the original verification link.

D-Link DSL-G256DG version vBZ_1.00.27 web management interface allows authentication bypass via an unspecified method.

In Jenkins WSO2 Oauth Plugin 1.0 and earlier, authentication claims are accepted without validation by the "WSO2 Oauth" security realm, allowing unauthenticated attackers to log in to controllers using this security realm using any username and any password, including usernames that do not exist.

A vulnerability in Cisco Webex Meetings and Cisco Webex Meetings Server could allow an unauthenticated, remote attacker to gain unauthorized access to a vulnerable Webex site. The vulnerability is due to improper handling of authentication tokens by a vulnerable Webex site. An attacker could exploit this vulnerability by sending crafted requests to a vulnerable Cisco Webex Meetings or Cisco Webex Meetings Server site. If successful, the attacker could gain the privileges of another user within the affected Webex site.

The ASUS DSL-N17U modem with firmware 1.1.0.2 allows attackers to access the admin interface by changing the admin password without authentication via a POST request to Advanced_System_Content.asp with the uiViewTools_username=admin&uiViewTools_Password= and uiViewTools_PasswordConfirm= substrings.