A vulnerability in the Kerberos authentication feature of Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to impersonate the Kerberos key distribution center (KDC) and bypass authentication on an affected device that is configured to perform Kerberos authentication for VPN or local device access. The vulnerability is due to insufficient identity verification of the KDC when a successful authentication response is received. An attacker could exploit this vulnerability by spoofing the KDC server response to the ASA device. This malicious response would not have been authenticated by the KDC. A successful attack could allow an attacker to bypass Kerberos authentication.

An issue was discovered on Fujitsu Eternus Storage DX200 S4 devices through 2020-11-25. After logging into the portal as a root user (using any web browser), the portal can be accessed with root privileges when the URI cgi-bin/csp?cspid={XXXXXXXXXX}&csppage=cgi_PgOverview&csplang=en is visited from a different web browser.

An issue was discovered on Western Digital My Cloud OS 5 devices before 5.07.118. A NAS Admin authentication bypass vulnerability could allow an unauthenticated user to gain access to the device.

ask_password in Tomb 2.0 through 2.7 returns a warning when pinentry-curses is used and $DISPLAY is non-empty, causing affected users' files to be encrypted with "tomb {W] Detected DISPLAY, but only pinentry-curses is found." as the encryption key.

Barco wePresent WiPG-1600W devices allow Authentication Bypass. Affected Version(s): 2.5.1.8. The Barco wePresent WiPG-1600W web interface does not use session cookies for tracking authenticated sessions. Instead, the web interface uses a "SEID" token that is appended to the end of URLs in GET requests. Thus the "SEID" would be exposed in web proxy logs and browser history. An attacker that is able to capture the "SEID" and originate requests from the same IP address (via a NAT device or web proxy) would be able to access the user interface of the device without having to know the credentials.

An issue was discovered on Western Digital My Cloud OS 5 devices before 5.06.115. A NAS Admin authentication bypass vulnerability could allow an unauthenticated user to execute privileged commands on the device via a cookie, because of insufficient validation of URI paths.

On Western Digital My Cloud OS 5 devices before 5.06.115, the NAS Admin dashboard has an authentication bypass vulnerability that could allow an unauthenticated user to execute privileged commands on the device.

Bminusl IHateToBudget v1.5.7 employs a weak password policy which allows attackers to potentially gain unauthorized access to the application via brute-force attacks. Additionally, user passwords are hashed without a salt or pepper making it much easier for tools like hashcat to crack the hashes.

An issue was discovered on Western Digital My Cloud OS 5 devices before 5.06.115. A NAS Admin authentication bypass vulnerability could allow an unauthenticated user to execute privileged commands on the device via a cookie. (In addition, an upload endpoint could then be used by an authenticated administrator to upload executable PHP scripts.)

confirm.php in ATutor 2.2 and earlier allows remote attackers to bypass authentication and gain access as an existing user via the auto_login parameter.

ESPv2 is a service proxy that provides API management capabilities using Google Service Infrastructure. ESPv2 2.20.0 through 2.42.0 contains an authentication bypass vulnerability. API clients can craft a malicious `X-HTTP-Method-Override` header value to bypass JWT authentication in specific cases. ESPv2 allows malicious requests to bypass authentication if both the conditions are true: The requested HTTP method is **not** in the API service definition (OpenAPI spec or gRPC `google.api.http` proto annotations, and the specified `X-HTTP-Method-Override` is a valid HTTP method in the API service definition. ESPv2 will forward the request to your backend without checking the JWT. Attackers can craft requests with a malicious `X-HTTP-Method-Override` value that allows them to bypass specifying JWTs. Restricting API access with API keys works as intended and is not affected by this vulnerability. Upgrade deployments to release v2.43.0 or higher to receive a patch. This release ensures that JWT authentication occurs, even when the caller specifies `x-http-method-override`. `x-http-method-override` is still supported by v2.43.0+. API clients can continue sending this header to ESPv2.

file.cgi in Secure Computing SecurityReporter (aka Network Security Analyzer) before 4.6.3 allows remote attackers to bypass authentication via a name parameter ending with a "%00.gif" sequence. NOTE: a separate traversal vulnerability could be leveraged to download arbitrary files.

A vulnerability, which was classified as critical, was found in JAdmin-JAVA JAdmin 1.0. Affected is the function toLogin of the file NoNeedLoginController.java of the component Admin Backend. The manipulation leads to improper authentication. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Cisco Linksys Routers EA2700, EA3500, E4200, EA4500: A bug can cause an unsafe TCP port to open which leads to unauthenticated access

HGiga MailSherlock contains weak authentication flaw that attackers grant privilege remotely with default password generation mechanism.

A flaw was found in Linux-Pam in versions prior to 1.5.1 in the way it handle empty passwords for non-existing users. When the user doesn't exist PAM try to authenticate with root and in the case of an empty password it successfully authenticate.

A vulnerability was determined in Technostrobe HI-LED-WR120-G2 5.5.0.1R6.03.30. The affected element is the function index_config of the file /LoginCB. This manipulation causes improper authentication. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered in Zammad before 3.4.1. There is an authentication bypass in the SSO endpoint via a crafted header, when SSO is not configured. An attacker can create a valid and authenticated session that can be used to perform any actions in the name of other users.

In Alerta before version 8.1.0, users may be able to bypass LDAP authentication if they provide an empty password when Alerta server is configure to use LDAP as the authorization provider. Only deployments where LDAP servers are configured to allow unauthenticated authentication mechanism for anonymous authorization are affected. A fix has been implemented in version 8.1.0 that returns HTTP 401 Unauthorized response for any authentication attempts where the password field is empty. As a workaround LDAP administrators can disallow unauthenticated bind requests by clients.

The LDAP authentication method in LdapLoginModule in Hazelcast IMDG Enterprise 4.x before 4.0.3, and Jet Enterprise 4.x through 4.2, doesn't verify properly the password in some system-user-dn scenarios. As a result, users (clients/members) can be authenticated even if they provide invalid passwords.

In SaltStack Salt through 3002, salt-netapi improperly validates eauth credentials and tokens. A user can bypass authentication and invoke Salt SSH.

Dell Storage Center - Dell Storage Manager, version(s) 20.1.21, contain(s) an Improper Authentication vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Protection mechanism bypass. Authentication Bypass in DSM Data Collector. An unauthenticated remote attacker can access APIs exposed by ApiProxy.war in DataCollectorEar.ear by using a special SessionKey and UserId. These userid are special users created in compellentservicesapi for special purposes.

An authentication bypass in Optoma 1080PSTX C02 allows an attacker to access the administration console without valid credentials.

Loftware Spectrum before 4.6 HF14 has Missing Authentication for a Critical Function.

A vulnerability in the single sign-on (SSO) implementation of Cisco BroadWorks Application Delivery Platform and Cisco BroadWorks Xtended Services Platform could allow an unauthenticated, remote attacker to forge the credentials required to access an affected system. This vulnerability is due to the method used to validate SSO tokens. An attacker could exploit this vulnerability by authenticating to the application with forged credentials. A successful exploit could allow the attacker to commit toll fraud or to execute commands at the privilege level of the forged account. If that account is an Administrator account, the attacker would have the ability to view confidential information, modify customer settings, or modify settings for other users. To exploit this vulnerability, the attacker would need a valid user ID that is associated with an affected Cisco BroadWorks system.

In cPanel before 88.0.3, insecure chkservd test credentials are used on a templated VM (SEC-554).

Wekan is open source kanban built with Meteor. Prior to 9.46, header-login with HEADER_LOGIN_TRUSTED_IPS uses getRequestIp() in server/lib/headerLoginAuth.js to trust the client-supplied X-Forwarded-For header before the real socket address, allowing an unauthenticated attacker to send HEADER_LOGIN_ID for any username and receive a meteor_login_token session, including for admin. This issue is fixed in version 9.46.

An issue in WooCommerce Payments plugin for WordPress (versions 5.6.1 and lower) allows an unauthenticated attacker to send requests on behalf of an elevated user, like administrator. This allows a remote, unauthenticated attacker to gain admin access on a site that has the affected version of the plugin activated.

Monkey HTTP Daemon: broken user name authentication

Improper Authentication, Missing Authentication for Critical Function, Not Failing Securely ('Failing Open') vulnerability in Apache Camel Keycloak Component. The KeycloakSecurityPolicy of camel-keycloak guards a route by running KeycloakSecurityProcessor.beforeProcess(), which performs three checks in sequence: it rejects a request that carries no access token, then - only if requiredRoles is non-empty - validates the roles, and - only if requiredPermissions is non-empty - validates the permissions. The actual cryptographic verification of the bearer access token (signature, issuer and expiry for a local JWT, or active-state and issuer for token introspection) is performed exclusively inside those role and permission checks. KeycloakSecurityPolicy defaults requiredRoles and requiredPermissions to empty - which is the documented 'Basic Setup' - so on a route configured that way the role and permission checks are skipped and the access token is therefore never verified. The token-presence check still rejects a missing token, but an invalid token is accepted: any non-null value in the Authorization: Bearer header - including an arbitrary string or a forged, unsigned JWT - passes the policy and the request reaches the protected route, with no signature, issuer or expiry check and no request to Keycloak. The token is read from the inbound request header because allowTokenFromHeader defaults to true. Because the normal reason to place a route behind this policy is that the route performs server-side work, the bypass results in unauthenticated access to that work; where the protected route forwards to a code-execution-capable producer, it can result in unauthenticated remote code execution. This defect is independent of CVE-2026-23552: that issue concerned the issuer claim and was fixed by adding a check inside the verification routine, but here the verification routine is not reached at all in the default configuration, so the defect remains. This issue affects Apache Camel: from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, configure a non-empty requiredRoles or requiredPermissions on every KeycloakSecurityPolicy so that the token-verification path is exercised, set allowTokenFromHeader to false where the token is not expected from the request header, or perform token verification at the framework layer ahead of the policy.

Because of unauthenticated password changes in ForLogic Qualiex v1 and v3, customer and admin permissions and data can be accessed via a simple request. NOTE: as of 2025-10-14, the Supplier's perspective is that this is "corrected in all maintained versions. Password reset requests are validated against registered user emails and require a valid, short-lived token."

In S+ Operations and S+ History, it is possible that an unauthenticated user could inject values to the Operations History server (or standalone S+ History server) and ultimately write values to the controlled process.

A remote urlaccesscontroller authentication bypass vulnerability was discovered in HPE Intelligent Management Center (iMC) version(s): Prior to iMC PLAT 7.3 (E0705P07).

ConnectWise Automate through 2020.x has insufficient validation on certain authentication paths, allowing authentication bypass via a series of attempts. This was patched in 2020.7 and in a hotfix for 2019.12.

Unify OpenStage/OpenScape Desk Phone IP SIP before V3 R3.11.0 has an authentication bypass in the default mode of the Workpoint Interface

The Ultimate Membership Pro plugin for WordPress is vulnerable to Authentication Bypass in versions between, and including, 7.3 to 8.6. This makes it possible for unauthenticated attackers to login as any user, including the site administrator with a default user ID of 1, via the username or user ID.

A vulnerability, which was classified as critical, was found in 20120630 Novel-Plus up to 0e156c04b4b7ce0563bef6c97af4476fcda8f160. Affected is the function genCode of the file novel-admin/src/main/java/com/java2nb/common/controller/GeneratorController.java. The manipulation leads to missing authentication. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.7, LTS2026 release version 8.6.1.0 through 8.6.1.10, LTS2025 release version 8.3.1.0 through 8.3.1.30, LTS2024 release versions 7.13.1.0 through 7.13.1.70 an improper authentication vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to unauthorized access. This is a critical severity vulnerability as it allows an attacker to take complete control of system; so Dell recommends customers to upgrade at the earliest opportunity.

The communication protocol implemented in Ghost Robotics Vision 60 v0.27.2 could allow an attacker to send commands to the robot from an external attack station, impersonating the control station (tablet) and gaining unauthorised full control of the robot. The absence of encryption and authentication mechanisms in the communication protocol allows an attacker to capture legitimate traffic between the robot and the controller, replicate it, and send any valid command to the robot from any attacking computer or device. The communication protocol used in this interface is based on MAVLink, a widely documented protocol, which increases the likelihood of attack. There are two methods for connecting to the robot remotely: Wi-Fi and 4G/LTE.

AVE DOMINAplus <=1.10.x suffers from an authentication bypass vulnerability due to missing control check when directly calling the autologin GET parameter in changeparams.php script. Setting the autologin value to 1 allows an unauthenticated attacker to permanently disable the authentication security control and access the management interface with admin privileges without providing credentials.

A vulnerability was found in Klapp App and classified as problematic. This issue affects some unknown processing of the JSON Web Token Handler. The manipulation leads to weak authentication. The attack may be initiated remotely.

CasaOS is an open-source Personal Cloud system. Unauthenticated attackers can craft arbitrary JWTs and access features that usually require authentication and execute arbitrary commands as `root` on CasaOS instances. This problem was addressed by improving the validation of JWTs in commit `705bf1f`. This patch is part of CasaOS 0.4.4. Users should upgrade to CasaOS 0.4.4. If they can't, they should temporarily restrict access to CasaOS to untrusted users, for instance by not exposing it publicly.

An authentication bypass vulnerability exists in certain releases of Ciena Navigator Network Control Suite (NCS), Manage Control Plan (MCP), and Blue Planet products. The issue is caused by improper handling of HTTP request paths and headers, which allows an unauthenticated attacker to manipulate requests in a manner that bypasses authentication and associated audit logging controls.

Incorrect Access Control vulnerability in Online Book Store v1.0 via admin_verify.php, which could let a remote mailicious user bypass authentication and obtain sensitive information.

Apache Shiro before 1.7.0, when using Apache Shiro with Spring, a specially crafted HTTP request may cause an authentication bypass.

Logsign Unified SecOps Platform Authentication Bypass Vulnerability. This vulnerability allows remote attackers to bypass authentication on affected installations of Logsign Unified SecOps Platform. Authentication is not required to exploit this vulnerability. The specific flaw exists within the web service, which listens on TCP port 443 by default. The issue results from the lack of proper implementation of the authentication algorithm. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-25336.

A vulnerability has been identified in SIMATIC HMI Unified Comfort Panels (All versions <= V16). Affected devices insufficiently validate authentication attempts as the information given can be truncated to match only a set number of characters versus the whole provided string. This could allow a remote attacker to discover user passwords and obtain access to the Sm@rt Server via a brute-force attack.

The ARMember Premium plugin for WordPress is vulnerable to an insecure password reset mechanism in all versions up to, and including, 7.3.1. The plugin stores a plaintext copy of the password reset key in the `arm_reset_password_key` user meta field when a user requests a password reset. This is in addition to the hashed key that WordPress core stores securely in `wp_users.user_activation_key`. The plaintext key stored in `wp_usermeta` can be used with the plugin's custom `armrp` reset action to set a new password for any user. Combined with another vulnerability such as SQL Injection (CVE-2026-5073, CVE-2026-5074), this makes it possible for unauthenticated attackers to extract the plaintext reset key and take over any user account, including administrators.

An issue was discovered on Mofi Network MOFI4500-4GXeLTE 4.1.5-std devices. The authentication function contains undocumented code that provides the ability to authenticate as root without knowing the actual root password. An adversary with the private key can remotely authenticate to the management interface as root.

authentik is an open-source identity provider. Prior to versions 2025.12.6, 2026.2.4, and 2026.5.1, the Source stage can be bypassed by sending an empty POST. This issue has been patched in versions 2025.12.6, 2026.2.4, and 2026.5.1.