A vulnerability in the Link Layer Discovery Protocol (LLDP) message parser of Cisco IOS Software and Cisco IOS XE Software could allow an attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. This vulnerability is due to improper initialization of a buffer. An attacker could exploit this vulnerability via any of the following methods: An authenticated, remote attacker could access the LLDP neighbor table via either the CLI or SNMP while the device is in a specific state. An unauthenticated, adjacent attacker could corrupt the LLDP neighbor table by injecting specific LLDP frames into the network and then waiting for an administrator of the device or a network management system (NMS) managing the device to retrieve the LLDP neighbor table of the device via either the CLI or SNMP. An authenticated, adjacent attacker with SNMP read-only credentials or low privileges on the device CLI could corrupt the LLDP neighbor table by injecting specific LLDP frames into the network and then accessing the LLDP neighbor table via either the CLI or SNMP. A successful exploit could allow the attacker to cause the affected device to crash, resulting in a reload of the device.
A vulnerability in the OSPF protocol of Cisco Secure Firewall ASA Software and Cisco Secure FTD Software could allow an authenticated, adjacent attacker to cause an affected device to reload unexpectedly, resulting in a DoS condition. To exploit this vulnerability, the attacker must have the OSPF secret key. This vulnerability is due to insufficient input validation when processing OSPF link-state update (LSU) packets. An attacker could exploit this vulnerability by sending crafted OSPF LSU packets. A successful exploit could allow the attacker to corrupt the heap, causing the device to reload, resulting in a DoS condition.
A vulnerability in the OSPF protocol of Cisco Secure Firewall ASA Software and Cisco Secure FTD Software could allow an authenticated, adjacent attacker to cause an affected device to reload unexpectedly, resulting in a DoS condition. To exploit this vulnerability, the attacker must have the OSPF secret key. This vulnerability is due to heap corruption in OSPF when parsing packets. An attacker could exploit this vulnerability by sending crafted packets to the OSPF service. A successful exploit could allow the attacker to corrupt the heap, causing the affected device to reload, resulting in a DoS condition.
A vulnerability in the Cisco Aironet Series Access Points (APs) software could allow an authenticated, adjacent attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to a deadlock condition that may occur when an affected AP attempts to dequeue aggregated traffic that is destined to an attacker-controlled wireless client. An attacker who can successfully transition between multiple Service Set Identifiers (SSIDs) hosted on the same AP while replicating the required traffic patterns could trigger the deadlock condition. A watchdog timer that detects the condition will trigger a reload of the device, resulting in a DoS condition while the device restarts.
Cisco IOS before 15.1(1)SY, when Multicast Listener Discovery (MLD) snooping is enabled, allows remote attackers to cause a denial of service (CPU consumption or device crash) via MLD packets on a network that contains many IPv6 hosts, aka Bug ID CSCtr88193.
The SSH server in (1) Cisco Service Control Engine (SCE) before 3.1.6, and (2) Icon Labs Iconfidant SSH before 2.3.8, allows remote attackers to cause a denial of service (device restart or daemon outage) via a high rate of login attempts, aka Bug ID CSCsi68582.
A vulnerability in the Layer 3 multicast feature of Cisco IOS XR Software for Cisco ASR 9000 Series Aggregation Services Routers, ASR 9902 Compact High-Performance Routers, and ASR 9903 Compact High-Performance Routers could allow an unauthenticated, remote attacker to cause a line card to reset, resulting in a denial of service (DoS) condition. This vulnerability is due to the incorrect handling of malformed IPv4 multicast packets that are received on line cards where the interface has either an IPv4 access control list (ACL) or a QoS policy applied. An attacker could exploit this vulnerability by sending crafted IPv4 multicast packets through an affected device. A successful exploit could allow the attacker to cause line card exceptions or a hard reset. Traffic over that line card would be lost while the line card reloads.
Cisco Firewall Services Module (FWSM) 3.2(1), and 3.1(5) and earlier, allows remote attackers to cause a denial of service (device reload) via a crafted HTTPS request, aka CSCsi77844.
Cisco PIX and ASA appliances with 7.0 through 8.0 software, and Cisco Firewall Services Module (FWSM) 3.1(5) and earlier, allow remote attackers to cause a denial of service (device reload) via a crafted MGCP packet, aka CSCsi90468 (appliance) and CSCsi00694 (FWSM).
Multiple vulnerabilities in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an unauthenticated, remote attacker to cause the web-based management interface to unexpectedly restart. The vulnerability is due to insufficient input validation on the web-based management interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to cause the interface to restart, resulting in a denial of service (DoS) condition.
Multiple vulnerabilities in the Application Level Gateway (ALG) for the Network Address Translation (NAT) feature of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass the ALG and open unauthorized connections with a host located behind the ALG. For more information about these vulnerabilities, see the Details section of this advisory. Note: These vulnerabilities have been publicly discussed as NAT Slipstreaming.
Multiple vulnerabilities in the Application Level Gateway (ALG) for the Network Address Translation (NAT) feature of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass the ALG and open unauthorized connections with a host located behind the ALG. For more information about these vulnerabilities, see the Details section of this advisory. Note: These vulnerabilities have been publicly discussed as NAT Slipstreaming.
Multiple vulnerabilities in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the software-based SSL/TLS message handler of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient validation of SSL/TLS messages when the device performs software-based SSL/TLS decryption. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: Datagram TLS (DTLS) messages cannot be used to exploit this vulnerability.
A vulnerability in the Unidirectional Link Detection (UDLD) feature of Cisco FXOS Software, Cisco IOS Software, Cisco IOS XE Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause an affected device to reload. This vulnerability is due to improper input validation of the UDLD packets. An attacker could exploit this vulnerability by sending specifically crafted UDLD packets to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. Note: The UDLD feature is disabled by default, and the conditions to exploit this vulnerability are strict. An attacker must have full control of a directly connected device. On Cisco IOS XR devices, the impact is limited to the reload of the UDLD process.
A vulnerability in the CLI of Cisco FTD Software could allow an authenticated, local attacker with administrative privileges to execute arbitrary commands with root privileges on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of user-supplied command arguments. An attacker could exploit this vulnerability by submitting crafted input to the affected commands. A successful exploit could allow the attacker to execute commands with root privileges on the underlying operating system. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
Cisco IP Phone 7940 and 7960 with P0S3-08-6-00 firmware, and other SIP firmware before 8.7(0), allows remote attackers to cause a denial of service (device reboot) via (1) a certain sequence of 10 invalid SIP INVITE and OPTIONS messages; or (2) a certain invalid SIP INVITE message that contains a remote tag, followed by a certain set of two related SIP OPTIONS messages.
The HTTP implementation in Cisco WebEx Node for MCS, WebEx Meetings Server, and WebEx Node for ASR 1000 Series allows remote attackers to read the contents of uninitialized memory locations via a crafted request, aka Bug IDs CSCue36672, CSCue31363, CSCuf17466, and CSCug61252.
A vulnerability in the fragmentation handling code of tunnel protocol packets in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected system to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to the improper handling of large fragmented tunnel protocol packets. One example of a tunnel protocol is Generic Routing Encapsulation (GRE). An attacker could exploit this vulnerability by sending crafted fragmented packets to an affected system. A successful exploit could allow the attacker to cause the affected system to reload, resulting in a DoS condition. Note: Only traffic directed to the affected system can be used to exploit this vulnerability.
A vulnerability in the reassembly logic for fragmented IPv4 packets of Cisco StarOS running on virtual platforms could allow an unauthenticated, remote attacker to trigger a reload of the npusim process, resulting in a denial of service (DoS) condition. There are four instances of the npusim process running per Service Function (SF) instance, each handling a subset of all traffic flowing across the device. It is possible to trigger a reload of all four instances of the npusim process around the same time. The vulnerability is due to improper handling of fragmented IPv4 packets containing options. An attacker could exploit this vulnerability by sending a malicious IPv4 packet across an affected device. An exploit could allow the attacker to trigger a restart of the npusim process, which will result in all traffic queued toward this instance of the npusim process to be dropped while the process is restarting. The npusim process typically restarts within less than a second. This vulnerability affects: Cisco Virtualized Packet Core-Single Instance (VPC-SI), Cisco Virtualized Packet Core-Distributed Instance (VPC-DI), Cisco Ultra Packet Core (UPC). Cisco Bug IDs: CSCvh29613.
A vulnerability in the Cisco Umbrella Enterprise Roaming Client (ERC) could allow an authenticated, local attacker to elevate privileges to Administrator. To exploit the vulnerability, the attacker must authenticate with valid local user credentials. This vulnerability is due to improper implementation of file system permissions, which could allow non-administrative users to place files within restricted directories. An attacker could exploit this vulnerability by placing an executable file within the restricted directory, which when executed by the ERC client, would run with Administrator privileges.
A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to craft a packet to the management interface on an affected system, causing a buffer overflow. The vulnerability is due to incorrect input validation in the authentication module of the NX-API subsystem. An attacker could exploit this vulnerability by sending a crafted HTTP or HTTPS packet to the management interface of an affected system with the NX-API feature enabled. An exploit could allow the attacker to execute arbitrary code as root. Note: NX-API is disabled by default. This vulnerability affects: MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvd45804, CSCve02322, CSCve02412.
A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to perform a command-injection attack on an affected device. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting malicious command arguments into a vulnerable CLI command. A successful exploit could allow the attacker, authenticated as a privileged user, to execute arbitrary commands with root privileges. Note: On products that support multiple virtual device contexts (VDC), this vulnerability could allow an attacker to access files from any VDC. This vulnerability affects Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve51704, CSCve91749, CSCve91768.
A vulnerability in the Precision Time Protocol (PTP) feature of Cisco Nexus 5500, 5600, and 6000 Series Switches running Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a lack of protection against PTP frame flood attacks. An attacker could exploit this vulnerability by sending large streams of malicious IPv4 or IPv6 PTP traffic to the affected device. A successful exploit could allow the attacker to cause a DoS condition, impacting the traffic passing through the device.
A vulnerability in the web interface of the Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. It is also possible on certain software releases that the ASA will not reload, but an attacker could view sensitive system information without authentication by using directory traversal techniques. The vulnerability is due to lack of proper input validation of the HTTP URL. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. An exploit could allow the attacker to cause a DoS condition or unauthenticated disclosure of information. This vulnerability applies to IPv4 and IPv6 HTTP traffic. This vulnerability affects Cisco ASA Software and Cisco Firepower Threat Defense (FTD) Software that is running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 1000V Cloud Firewall, ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCvi16029.
A vulnerability in the 802.11 frame validation functionality of the Cisco Wireless LAN Controller (WLC) could allow an unauthenticated, adjacent attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of certain 802.11 management information element frames that an affected device receives from wireless clients. An attacker could exploit this vulnerability by sending a malformed 802.11 management frame to an affected device. A successful exploit could allow the attacker to cause the affected device to reload unexpectedly, resulting in a DoS condition. This vulnerability affects only Cisco Wireless LAN Controllers that are running Cisco Mobility Express Release 8.5.103.0. Cisco Bug IDs: CSCvg07024.
A vulnerability in the IPv6 processing code of Cisco IOS and IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload. The vulnerability is due to incorrect handling of specific IPv6 hop-by-hop options. An attacker could exploit this vulnerability by sending a malicious IPv6 packet to or through the affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition on an affected device.
A vulnerability in the implementation of the cluster feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to trigger a denial of service (DoS) condition on an affected device. The vulnerability is due to improper input validation when handling Cluster Management Protocol (CMP) messages. An attacker could exploit this vulnerability by sending a malicious CMP message to an affected device. A successful exploit could allow the attacker to cause the switch to crash and reload or to hang, resulting in a DoS condition. If the switch hangs it will not reboot automatically, and it will need to be power cycled manually to recover.
A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an authenticated, remote attacker to send a malicious packet to the management interface on an affected system and execute a command-injection exploit. The vulnerability is due to incorrect input validation of user-supplied data to the NX-API subsystem. An attacker could exploit this vulnerability by sending a malicious HTTP or HTTPS packet to the management interface of an affected system that has the NX-API feature enabled. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. Note: NX-API is disabled by default. This vulnerability affects MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvd47415, CSCve03216, CSCve03224, CSCve03234.
A vulnerability in the web upload function of Cisco Cloud Services Platform 2100 could allow an authenticated, remote attacker to obtain restricted shell access on an affected system. The vulnerability is due to insufficient input validation of parameters passed to a specific function within the user interface. An attacker could exploit this vulnerability by injecting code into a function parameter. Cisco Bug IDs: CSCvi12935.
A vulnerability in the Link Layer Discovery Protocol (LLDP) implementation for Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition when the device unexpectedly reloads. The vulnerability is due to improper input validation of certain type, length, value (TLV) fields of the LLDP frame header. An attacker could exploit this vulnerability by sending a crafted LLDP packet to an interface on the targeted device. A successful exploit could allow the attacker to cause the switch to reload unexpectedly.
A vulnerability in the CLI parser of Cisco FXOS Software and Cisco UCS Fabric Interconnect Software could allow an authenticated, local attacker to cause a buffer overflow on an affected device. The vulnerability is due to incorrect input validation in the CLI parser subsystem. An attacker could exploit this vulnerability by exceeding the expected length of user input. A successful exploit could allow the attacker to execute arbitrary code with root privileges on the affected system. This vulnerability affects Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvb61099, CSCvb86743.
A vulnerability in the Session Initiation Protocol (SIP) call-handling functionality of Cisco IP Phone 7800 Series phones and Cisco IP Phone 8800 Series phones could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected phone. The vulnerability is due to incomplete input validation of SIP Session Description Protocol (SDP) parameters by the SDP parser of an affected phone. An attacker could exploit this vulnerability by sending a malformed SIP packet to an affected phone. A successful exploit could allow the attacker to cause all active phone calls on the affected phone to be dropped while the SIP process on the phone unexpectedly restarts, resulting in a DoS condition. Cisco Bug IDs: CSCvf40066.
A vulnerability in the administrative GUI configuration feature of Cisco Wireless LAN Controller (WLC) Software could allow an aUTHENTICated, remote attacker to cause the device to reload unexpectedly during device configuration when the administrator is using this GUI, causing a denial of service (DoS) condition on an affected device. The attacker would need to have valid administrator credentials on the device. This vulnerability is due to incomplete input validation for unexpected configuration options that the attacker could submit while accessing the GUI configuration menus. An attacker could exploit these vulnerabilities by authenticating to the device and submitting crafted user input when using the administrative GUI configuration feature. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Software versions prior to 8.3.150.0, 8.5.140.0, 8.8.111.0 are affected by this vulnerability.
A vulnerability in the Cisco WebEx Network Recording Player for Advanced Recording Format (ARF) files could allow an unauthenticated, remote attacker to execute arbitrary code on the system of a targeted user. An attacker could exploit this vulnerability by sending the user a link or email attachment with a malicious ARF file and persuading the user to follow the link or open the file. Successful exploitation could allow the attacker to execute arbitrary code on the user's system. This vulnerability affects Cisco WebEx Business Suite meeting sites, Cisco WebEx Meetings sites, Cisco WebEx Meetings Server, and Cisco WebEx ARF players. The following client builds of Cisco WebEx Business Suite (WBS31 and WBS32), Cisco WebEx Meetings, and Cisco WebEx Meetings Server are affected: Cisco WebEx Business Suite (WBS31) client builds prior to T31.23.4, Cisco WebEx Business Suite (WBS32) client builds prior to T32.12, Cisco WebEx Meetings with client builds prior to T32.12, Cisco WebEx Meeting Server builds prior to 3.0 Patch 1. Cisco Bug IDs: CSCvh85410, CSCvh85430, CSCvh85440, CSCvh85442, CSCvh85453, CSCvh85457.
A vulnerability in the Border Gateway Protocol (BGP) implementation of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to the device unexpectedly reloading. The vulnerability is due to incomplete input validation of the BGP update messages. An attacker could exploit this vulnerability by sending a crafted BGP update message to the targeted device. An exploit could allow the attacker to cause the switch to reload unexpectedly. The Cisco implementation of the BGP protocol only accepts incoming BGP traffic from explicitly defined peers. To exploit this vulnerability, an attacker must be able to send the malicious packets over a TCP connection that appears to come from a trusted BGP peer or inject malformed messages into the victim's BGP network. This would require obtaining information about the BGP peers in the affected system's trusted network. The vulnerability may be triggered when the router receives a malformed BGP message from a peer on an existing BGP session. At least one BGP neighbor session must be established for a router to be vulnerable. This vulnerability affects Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve79599, CSCve87784, CSCve91371, CSCve91387.
The traffic engineering (TE) processing subsystem in Cisco IOS XR allows remote attackers to cause a denial of service (process restart) via crafted TE packets, aka Bug ID CSCue04000.
A vulnerability in the Cisco Discovery Protocol (formerly known as CDP) subsystem of devices running, or based on, Cisco NX-OS Software contain a vulnerability that could allow an unauthenticated, adjacent attacker to create a denial of service (DoS) condition. The vulnerability is due to a failure to properly validate certain fields within a Cisco Discovery Protocol message prior to processing it. An attacker with the ability to submit a Cisco Discovery Protocol message designed to trigger the issue could cause a DoS condition on an affected device while the device restarts. This vulnerability affects Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Director Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvc89242, CSCve40943, CSCve40953, CSCve40965, CSCve40970, CSCve40978, CSCve40992, CSCve41000, CSCve41007.
A vulnerability in the file type detection mechanism of the Cisco Advanced Malware Protection (AMP) for Endpoints macOS Connector could allow an unauthenticated, remote attacker to bypass malware detection. The vulnerability occurs because the software relies on only the file extension for detecting DMG files. An attacker could exploit this vulnerability by sending a DMG file with a nonstandard extension to a device that is running an affected AMP for Endpoints macOS Connector. An exploit could allow the attacker to bypass configured malware detection. Cisco Bug IDs: CSCve34034.
A vulnerability when handling incoming 802.11 Association Requests for Cisco Aironet 1800 Series Access Point (APs) on Qualcomm Atheros (QCA) based hardware platforms could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected system. A successful exploit could prevent new clients from joining the AP. The vulnerability is due to incorrect handling of malformed or invalid 802.11 Association Requests. An attacker could exploit this vulnerability by sending a malformed stream of 802.11 Association Requests to the local interface of the targeted device. A successful exploit could allow the attacker to cause a DoS situation on an affected system, causing new client 802.11 Association Requests to fail. This vulnerability affects the following Cisco products: Aironet 1560 Series Access Points, Aironet 1810 Series OfficeExtend Access Points, Aironet 1810w Series Access Points, Aironet 1815 Series Access Points, Aironet 1830 Series Access Points, Aironet 1850 Series Access Points, Aironet 2800 Series Access Points, Aironet 3800 Series Access Points. Cisco Bug IDs: CSCvg02116.
A vulnerability in specific CLI commands for the Cisco Identity Services Engine could allow an authenticated, local attacker to cause a denial of service (DoS) condition. The device may need to be manually rebooted to recover. The vulnerability is due to lack of proper input validation of the CLI user input for certain CLI commands. An attacker could exploit this vulnerability by authenticating to the device and issuing a crafted, malicious CLI command on the targeted device. A successful exploit could allow the attacker to cause a DoS condition. The attacker must have valid administrative privileges on the device to exploit this vulnerability. Cisco Bug IDs: CSCvf63414, CSCvh51992.
A vulnerability in the IPsec driver code of multiple Cisco IOS XE Software platforms and the Cisco ASA 5500-X Series Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to cause the device to reload. The vulnerability is due to improper processing of malformed IPsec Authentication Header (AH) or Encapsulating Security Payload (ESP) packets. An attacker could exploit this vulnerability by sending malformed IPsec packets to be processed by an affected device. An exploit could allow the attacker to cause a reload of the affected device.
A vulnerability in the web-based user interface (web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to write arbitrary files to the operating system of an affected device. The vulnerability is due to insufficient input validation of HTTP requests that are sent to the web UI of the affected software. An attacker could exploit this vulnerability by sending a malicious HTTP request to the web UI of the affected software. A successful exploit could allow the attacker to write arbitrary files to the operating system of an affected device. Cisco Bug IDs: CSCvb22645.
A vulnerability in the VLAN Trunking Protocol (VTP) subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to corrupt the internal VTP database on an affected device and cause a denial of service (DoS) condition. The vulnerability is due to a logic error in how the affected software handles a subset of VTP packets. An attacker could exploit this vulnerability by sending VTP packets in a sequence that triggers a timeout in the VTP message processing code of the affected software. A successful exploit could allow the attacker to impact the ability to create, modify, or delete VLANs and cause a DoS condition. There are workarounds that address this vulnerability. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS Software or Cisco IOS XE Software, are operating in VTP client mode or VTP server mode, and do not have a VTP domain name configured. The default configuration for Cisco devices that are running Cisco IOS Software or Cisco IOS XE Software and support VTP is to operate in VTP server mode with no domain name configured.
Cisco Access Point devices with software 8.2(102.43) allow remote attackers to cause a denial of service (device reload) via crafted ARP packets, aka Bug ID CSCuy55803.
A vulnerability in the Real-Time Transport Protocol (RTP) bitstream processing of the Cisco Meeting Server could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient input validation of incoming RTP bitstreams. An attacker could exploit this vulnerability by sending a crafted RTP bitstream to an affected Cisco Meeting Server. A successful exploit could allow the attacker to deny audio and video services by causing media process crashes resulting in a DoS condition on the affected product. This vulnerability affects Cisco Meeting Server deployments that are running Cisco Meeting Server Software Releases 2.0, 2.1, 2.2, and 2.3. Cisco Bug IDs: CSCve79693, CSCvf91393, CSCvg64656, CSCvh30725, CSCvi86363.
A vulnerability in the web UI of Cisco Unified Communications Manager (Unified CM) could allow an unauthenticated, remote attacker to conduct a cross-frame scripting (XFS) attack against the user of the web UI of an affected system. The vulnerability is due to insufficient protections for HTML inline frames (iframes) by the web UI of the affected software. An attacker could exploit this vulnerability by persuading a user of the affected UI to navigate to an attacker-controlled web page that contains a malicious HTML iframe. A successful exploit could allow the attacker to conduct click-jacking or other client-side browser attacks on the affected system. Cisco Bug IDs: CSCvg19761.
A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol component of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper input validation on fields within CAPWAP Discovery Request packets by the affected device. An attacker could exploit this vulnerability by sending malicious CAPWAP Discovery Request packets to the Cisco WLC Software. A successful exploit could allow the attacker to cause the Cisco WLC Software to disconnect associated access points (APs). While the APs disconnect and reconnect, service will be unavailable for a brief period of time, resulting in a DoS condition.
A vulnerability in the user management functionality of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, remote attacker to perform a denial of service (DoS) attack against an affected system. The vulnerability is due to insufficient validation of user-provided input. An attacker could exploit this vulnerability by logging in with a highly privileged user account and performing a sequence of specific user management operations that interfere with the underlying operating system. A successful exploit could allow the attacker to permanently degrade the functionality of the affected system.