TOTOLINK N600R V4.3.0cu.7570_B20200620 was discovered to contain a command injection vulnerability via the exportOvpn interface at cstecgi.cgi.

TOTOLINK N600R V4.3.0cu.7570_B20200620 was discovered to contain a command injection vulnerability via /setting/NTPSyncWithHost.

In vowifi service, there is a possible command injection due to improper input validation. This could lead to remote escalation of privilege with no additional execution privileges needed.

A command injection vulnerability in the function updateWifiInfo of TOTOLINK Technology routers T6 V3_Firmware T6_V3_V4.1.5cu.748_B20211015 and T10 V2_Firmware V4.1.8cu.5207_B20210320 allows attackers to execute arbitrary commands via a crafted MQTT packet.

TOTOLINK X18 v9.1.0cu.2024_B20220329 has an unauthorized arbitrary command execution in the enable parameter' of the sub_41105C function of cstecgi .cgi.

An issue in BL-AC2100 V1.0.4 and before allows a remote attacker to execute arbitrary code via the enable parameter passed to /goform/set_hidessid_cfg is not handled properly.

Linksys E5600 V1.1.0.26 is vulnerable to command injection in the runtime.macClone function via the mc.ip parameter.

linksys E5600 V1.1.0.26 is vulnerable to command injection in the function ddnsStatus.

An issue in BL-AC2100 <=V1.0.4 allows a remote attacker to execute arbitrary code via the time1 and time2 parameters in the set_LimitClient_cfg of the goahead webservice.

Magento versions 2.3.4 and earlier, 2.2.11 and earlier (see note), 1.14.4.4 and earlier, and 1.9.4.4 and earlier have a command injection vulnerability. Successful exploitation could lead to arbitrary code execution.

A vulnerability classified as critical was found in AMTT Hotel Broadband Operation System 1.0. This vulnerability affects the function popen of the file /manager/network/port_setup.php. The manipulation of the argument SwitchVersion/SwitchWrite/SwitchIP/SwitchIndex/SwitchState leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An Improper Input Validation in certain UniFi Access devices could allow a Command Injection by a malicious actor with access to UniFi Access management network. Affected Products: UniFi Access Reader Pro (Version 2.14.21 and earlier) UniFi Access G2 Reader Pro (Version 1.10.32 and earlier) UniFi Access G3 Reader Pro (Version 1.10.30 and earlier) UniFi Access Intercom (Version 1.7.28 and earlier) UniFi Access G3 Intercom (Version 1.7.29 and earlier) UniFi Access Intercom Viewer (Version 1.3.20 and earlier) Mitigation: Update UniFi Access Reader Pro Version 2.15.9 or later Update UniFi Access G2 Reader Pro Version 1.11.23 or later Update UniFi Access G3 Reader Pro Version 1.11.22 or later Update UniFi Access Intercom Version 1.8.22 or later Update UniFi Access G3 Intercom Version 1.8.22 or later Update UniFi Access Intercom Viewer Version 1.4.39 or later

Magento versions 2.3.4 and earlier, 2.2.11 and earlier (see note), 1.14.4.4 and earlier, and 1.9.4.4 and earlier have a command injection vulnerability. Successful exploitation could lead to arbitrary code execution.

Magento versions 2.3.4 and earlier, 2.2.11 and earlier (see note), 1.14.4.4 and earlier, and 1.9.4.4 and earlier have a command injection vulnerability. Successful exploitation could lead to arbitrary code execution.

An issue in Intelbras RX1500 v2.2.9 and RX3000 v1.0.11 allows unauthenticated attackers to execute arbitrary code via injecting a crafted payload into the ESSID name when creating a network.

Tenda AC10 V1.0 V15.03.06.23 has a command injection vulnerablility located in the formexeCommand function. The str variable receives the cmdinput parameter from a POST request and is later assigned to the cmd_buf variable, which is directly used in the doSystemCmd function, causing an arbitrary command execution.

TOTOLINK N600R V4.3.0cu.7570_B20200620 was discovered to contain a command injection vulnerability via the pingCheck function.

A vulnerability was found in Totolink X6000R AX3000 9.4.0cu.852_20230719. It has been rated as critical. This issue affects the function setWizardCfg of the file /cgi-bin/cstecgi.cgi of the component shttpd. The manipulation leads to command injection. The exploit has been disclosed to the public and may be used. The identifier VDB-254573 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An attacker may inject commands via specially-crafted post requests.

The package get-npm-package-version before 1.0.7 are vulnerable to Command Injection via main function in index.js.

This affects all versions of package mock2easy. a malicious user could inject commands through the _data variable: Affected Area require('../server/getJsonByCurl')(mock2easy, function (error, stdout) { if (error) { return res.json(500, error); } res.json(JSON.parse(stdout)); }, '', _data.interfaceUrl, query, _data.cookie,_data.interfaceType);

fs-path node module before 0.0.25 is vulnerable to command injection by way of user-supplied inputs via the `copy`, `copySync`, `remove`, and `removeSync` methods.

We have recently released new version of AirMax AirOS firmware v6.3.0 for TI, XW and XM boards that fixes vulnerabilities found on AirMax AirOS v6.2.0 and prior TI, XW and XM boards, according to the description below:There are certain end-points containing functionalities that are vulnerable to command injection. It is possible to craft an input string that passes the filter check but still contains commands, resulting in remote code execution.Mitigation:Update to the latest AirMax AirOS firmware version available at the AirMax download page.

Tenda AC15 v15.03.05.19 is vulnerable to Command Injection via the handler function in /goform/telnet.

Improper input validation in Citrix XenMobile Server 10.12 before RP3, Citrix XenMobile Server 10.11 before RP6, Citrix XenMobile Server 10.10 RP6 and Citrix XenMobile Server before 10.9 RP5 allows SQL Injection.

A command injection vulnerability in the `devcert` module may lead to remote code execution when users of the module pass untrusted input to the `certificateFor` function.

A vulnerability, which was classified as critical, has been found in DrayTek Vigor2960 and Vigor300B 1.5.1.3/1.5.1.4. This issue affects some unknown processing of the file /cgi-bin/mainfunction.cgi/apmcfgupptim of the component Web Management Interface. The manipulation of the argument session leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

DVR firmware in TAT-76 and TAT-77 series of products, provided by TONNET do not properly verify patch files. Attackers can inject a specific command into a patch file and gain access to the system.

RE11S v1.11 was discovered to contain a command injection vulnerability via the component /goform/formAccept.

Improper Neutralization of Special Elements used in a Command vulnerability allows OS Command Injection via RCE. This issue affects Pandora FMS from 700 to 777.6 .

A command injection vulnerability in the web interface of Adtran 411 ONT L80.00.0011.M2 allows attackers to escalate privileges to root and execute arbitrary commands.

A command injection vulnerability in the function meshSlaveDlfw of TOTOLINK Technology router T6 V3_Firmware T6_V3_V4.1.5cu.748_B20211015 allows attackers to execute arbitrary commands via a crafted MQTT packet.

A vulnerability, which was classified as critical, has been found in TOTOLINK X15 1.0.0-B20230714.1105. Affected by this issue is the function formMapReboot of the file /boafrm/formMapReboot. The manipulation of the argument deviceMacAddr leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in DrayTek Vigor2960 and Vigor300B 1.5.1.4. Affected is an unknown function of the file /cgi-bin/mainfunction.cgi/apmcfgupload of the component Web Management Interface. The manipulation of the argument session leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

1Panel is a web interface and MCP Server that manages websites, files, containers, databases, and LLMs on a Linux server. In versions 2.0.5 and below, the HTTPS protocol used for communication between the Core and Agent endpoints has incomplete certificate verification during certificate validation, leading to unauthorized interface access. Due to the presence of numerous command execution or high-privilege interfaces in 1Panel, this results in Remote Code Execution (RCE). This is fixed in version 2.0.6. The CVE has been translated from Simplified Chinese using GitHub Copilot.

EnerSys AMPA 22.09 and prior versions are vulnerable to command injection leading to privileged remote shell access.

A critical vulnerability has been discovered in Privileged Remote Access (PRA) and Remote Support (RS) products which can allow an unauthenticated attacker to inject commands that are run as a site user.

EnerSys AMPA versions 24.04 through 24.16, inclusive, are vulnerable to command injection leading to privileged remote shell access.

A vulnerability was found in trampgeek jobe up to 1.6.x and classified as critical. This issue affects the function run_in_sandbox of the file application/libraries/LanguageTask.php. The manipulation leads to command injection. Upgrading to version 1.7.0 is able to address this issue. The identifier of the patch is 8f43daf50c943b98eaf0c542da901a4a16e85b02. It is recommended to upgrade the affected component. The identifier VDB-217553 was assigned to this vulnerability.

A command injection vulnerability in the function isAssocPriDevice of TOTOLINK Technology router T6 V3_Firmware T6_V3_V4.1.5cu.748_B20211015 allows attackers to execute arbitrary commands via a crafted MQTT packet.

A vulnerability was found in D-Link DI-8003 16.07.16A1. It has been classified as critical. Affected is the function upgrade_filter_asp of the file /upgrade_filter.asp. The manipulation of the argument path leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Dango-Translator v4.5.5 was discovered to contain a remote command execution (RCE) vulnerability via the component app/config/cloud_config.json.

A command injection vulnerability in the function setUpgradeFW of TOTOLINK Technology router T6 V3_Firmware T6_V3_V4.1.5cu.748_B20211015 allows attackers to execute arbitrary commands via a crafted MQTT packet.

A vulnerability has been found in Tenda AC6 15.03.05.19 and classified as critical. Affected by this vulnerability is the function formWriteFacMac of the file /goform/WriteFacMac of the component API Endpoint. The manipulation of the argument mac leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

Arbitrary commands execution on the server by exploiting a command injection vulnerability in the LDAP authentication mechanism. This issue affects Pandora FMS: from 700 through <=777.4

Registrator is a GitHub app that automates creation of registration pull requests for julia packages to the General registry. Prior to version 1.9.5, if the clone URL returned by GitHub is malicious (or can be injected using upstream vulnerabilities) a shell script injection can occur within the `withpasswd` function. Alternatively, an argument injection is possible in the `gettreesha `function. either of these can then lead to a potential RCE. Users should upgrade immediately to v1.9.5 to receive a fix. All prior versions are vulnerable. No known workarounds are available.

TOTOLINK X6000R V9.4.0cu.1360_B20241207 was found to contain a command injection vulnerability in the sub_417D74 function via the file_name parameter. This vulnerability allows unauthenticated attackers to execute arbitrary commands via a crafted request.

Wavlink WN535K3 20191010 was found to contain a command injection vulnerability in the set_sys_adm function via the newpass parameter. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

Successful exploitation of the vulnerability could allow an attacker to inject commands with root privileges on the access point, potentially leading to the loss of confidentiality, integrity, availability, and full control of the access point.