In the Linux kernel, the following vulnerability has been resolved: mm: memory-failure: update ttu flag inside unmap_poisoned_folio Patch series "mm: memory_failure: unmap poisoned folio during migrate properly", v3. Fix two bugs during folio migration if the folio is poisoned. This patch (of 3): Commit 6da6b1d4a7df ("mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON") introduce TTU_HWPOISON to replace TTU_IGNORE_HWPOISON in order to stop send SIGBUS signal when accessing an error page after a memory error on a clean folio. However during page migration, anon folio must be set with TTU_HWPOISON during unmap_*(). For pagecache we need some policy just like the one in hwpoison_user_mappings to set this flag. So move this policy from hwpoison_user_mappings to unmap_poisoned_folio to handle this warning properly. Warning will be produced during unamp poison folio with the following log: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 365 at mm/rmap.c:1847 try_to_unmap_one+0x8fc/0xd3c Modules linked in: CPU: 1 UID: 0 PID: 365 Comm: bash Tainted: G W 6.13.0-rc1-00018-gacdb4bbda7ab #42 Tainted: [W]=WARN Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : try_to_unmap_one+0x8fc/0xd3c lr : try_to_unmap_one+0x3dc/0xd3c Call trace: try_to_unmap_one+0x8fc/0xd3c (P) try_to_unmap_one+0x3dc/0xd3c (L) rmap_walk_anon+0xdc/0x1f8 rmap_walk+0x3c/0x58 try_to_unmap+0x88/0x90 unmap_poisoned_folio+0x30/0xa8 do_migrate_range+0x4a0/0x568 offline_pages+0x5a4/0x670 memory_block_action+0x17c/0x374 memory_subsys_offline+0x3c/0x78 device_offline+0xa4/0xd0 state_store+0x8c/0xf0 dev_attr_store+0x18/0x2c sysfs_kf_write+0x44/0x54 kernfs_fop_write_iter+0x118/0x1a8 vfs_write+0x3a8/0x4bc ksys_write+0x6c/0xf8 __arm64_sys_write+0x1c/0x28 invoke_syscall+0x44/0x100 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x30/0xd0 el0t_64_sync_handler+0xc8/0xcc el0t_64_sync+0x198/0x19c ---[ end trace 0000000000000000 ]--- [mawupeng1@huawei.com: unmap_poisoned_folio(): remove shadowed local `mapping', per Miaohe]

In the Linux kernel, the following vulnerability has been resolved: acpi: typec: ucsi: Introduce a ->poll_cci method For the ACPI backend of UCSI the UCSI "registers" are just a memory copy of the register values in an opregion. The ACPI implementation in the BIOS ensures that the opregion contents are synced to the embedded controller and it ensures that the registers (in particular CCI) are synced back to the opregion on notifications. While there is an ACPI call that syncs the actual registers to the opregion there is rarely a need to do this and on some ACPI implementations it actually breaks in various interesting ways. The only reason to force a sync from the embedded controller is to poll CCI while notifications are disabled. Only the ucsi core knows if this is the case and guessing based on the current command is suboptimal, i.e. leading to the following spurious assertion splat: WARNING: CPU: 3 PID: 76 at drivers/usb/typec/ucsi/ucsi.c:1388 ucsi_reset_ppm+0x1b4/0x1c0 [typec_ucsi] CPU: 3 UID: 0 PID: 76 Comm: kworker/3:0 Not tainted 6.12.11-200.fc41.x86_64 #1 Hardware name: LENOVO 21D0/LNVNB161216, BIOS J6CN45WW 03/17/2023 Workqueue: events_long ucsi_init_work [typec_ucsi] RIP: 0010:ucsi_reset_ppm+0x1b4/0x1c0 [typec_ucsi] Call Trace: <TASK> ucsi_init_work+0x3c/0xac0 [typec_ucsi] process_one_work+0x179/0x330 worker_thread+0x252/0x390 kthread+0xd2/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Thus introduce a ->poll_cci() method that works like ->read_cci() with an additional forced sync and document that this should be used when polling with notifications disabled. For all other backends that presumably don't have this issue use the same implementation for both methods.

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix integer overflow while processing acdirmax mount option User-provided mount parameter acdirmax of type u32 is intended to have an upper limit, but before it is validated, the value is converted from seconds to jiffies which can lead to an integer overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: spufs: fix a leak on spufs_new_file() failure It's called from spufs_fill_dir(), and caller of that will do spufs_rmdir() in case of failure. That does remove everything we'd managed to create, but... the problem dentry is still negative. IOW, it needs to be explicitly dropped.

In the Linux kernel, the following vulnerability has been resolved: ftrace: Avoid potential division by zero in function_stat_show() Check whether denominator expression x * (x - 1) * 1000 mod {2^32, 2^64} produce zero and skip stddev computation in that case. For now don't care about rec->counter * rec->counter overflow because rec->time * rec->time overflow will likely happen earlier.

In the Linux kernel, the following vulnerability has been resolved: acpi: nfit: fix narrowing conversion in acpi_nfit_ctl Syzkaller has reported a warning in to_nfit_bus_uuid(): "only secondary bus families can be translated". This warning is emited if the argument is equal to NVDIMM_BUS_FAMILY_NFIT == 0. Function acpi_nfit_ctl() first verifies that a user-provided value call_pkg->nd_family of type u64 is not equal to 0. Then the value is converted to int, and only after that is compared to NVDIMM_BUS_FAMILY_MAX. This can lead to passing an invalid argument to acpi_nfit_ctl(), if call_pkg->nd_family is non-zero, while the lower 32 bits are zero. Furthermore, it is best to return EINVAL immediately upon seeing the invalid user input. The WARNING is insufficient to prevent further undefined behavior based on other invalid user input. All checks of the input value should be applied to the original variable call_pkg->nd_family. [iweiny: update commit message]

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix unexpectedly changed path in ksmbd_vfs_kern_path_locked When `ksmbd_vfs_kern_path_locked` met an error and it is not the last entry, it will exit without restoring changed path buffer. But later this buffer may be used as the filename for creation.

In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_erp: Fix object nesting warning ACLs in Spectrum-2 and newer ASICs can reside in the algorithmic TCAM (A-TCAM) or in the ordinary circuit TCAM (C-TCAM). The former can contain more ACLs (i.e., tc filters), but the number of masks in each region (i.e., tc chain) is limited. In order to mitigate the effects of the above limitation, the device allows filters to share a single mask if their masks only differ in up to 8 consecutive bits. For example, dst_ip/25 can be represented using dst_ip/24 with a delta of 1 bit. The C-TCAM does not have a limit on the number of masks being used (and therefore does not support mask aggregation), but can contain a limited number of filters. The driver uses the "objagg" library to perform the mask aggregation by passing it objects that consist of the filter's mask and whether the filter is to be inserted into the A-TCAM or the C-TCAM since filters in different TCAMs cannot share a mask. The set of created objects is dependent on the insertion order of the filters and is not necessarily optimal. Therefore, the driver will periodically ask the library to compute a more optimal set ("hints") by looking at all the existing objects. When the library asks the driver whether two objects can be aggregated the driver only compares the provided masks and ignores the A-TCAM / C-TCAM indication. This is the right thing to do since the goal is to move as many filters as possible to the A-TCAM. The driver also forbids two identical masks from being aggregated since this can only happen if one was intentionally put in the C-TCAM to avoid a conflict in the A-TCAM. The above can result in the following set of hints: H1: {mask X, A-TCAM} -> H2: {mask Y, A-TCAM} // X is Y + delta H3: {mask Y, C-TCAM} -> H4: {mask Z, A-TCAM} // Y is Z + delta After getting the hints from the library the driver will start migrating filters from one region to another while consulting the computed hints and instructing the device to perform a lookup in both regions during the transition. Assuming a filter with mask X is being migrated into the A-TCAM in the new region, the hints lookup will return H1. Since H2 is the parent of H1, the library will try to find the object associated with it and create it if necessary in which case another hints lookup (recursive) will be performed. This hints lookup for {mask Y, A-TCAM} will either return H2 or H3 since the driver passes the library an object comparison function that ignores the A-TCAM / C-TCAM indication. This can eventually lead to nested objects which are not supported by the library [1]. Fix by removing the object comparison function from both the driver and the library as the driver was the only user. That way the lookup will only return exact matches. I do not have a reliable reproducer that can reproduce the issue in a timely manner, but before the fix the issue would reproduce in several minutes and with the fix it does not reproduce in over an hour. Note that the current usefulness of the hints is limited because they include the C-TCAM indication and represent aggregation that cannot actually happen. This will be addressed in net-next. [1] WARNING: CPU: 0 PID: 153 at lib/objagg.c:170 objagg_obj_parent_assign+0xb5/0xd0 Modules linked in: CPU: 0 PID: 153 Comm: kworker/0:18 Not tainted 6.9.0-rc6-custom-g70fbc2c1c38b #42 Hardware name: Mellanox Technologies Ltd. MSN3700C/VMOD0008, BIOS 5.11 10/10/2018 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:objagg_obj_parent_assign+0xb5/0xd0 [...] Call Trace: <TASK> __objagg_obj_get+0x2bb/0x580 objagg_obj_get+0xe/0x80 mlxsw_sp_acl_erp_mask_get+0xb5/0xf0 mlxsw_sp_acl_atcam_entry_add+0xe8/0x3c0 mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0 mlxsw_sp_acl_tcam_vchunk_migrate_one+0x16b/0x270 mlxsw_sp_acl_tcam_vregion_rehash_work+0xbe/0x510 process_one_work+0x151/0x370

In the Linux kernel, the following vulnerability has been resolved: team: better TEAM_OPTION_TYPE_STRING validation syzbot reported following splat [1] Make sure user-provided data contains one nul byte. [1] BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:633 [inline] BUG: KMSAN: uninit-value in string+0x3ec/0x5f0 lib/vsprintf.c:714 string_nocheck lib/vsprintf.c:633 [inline] string+0x3ec/0x5f0 lib/vsprintf.c:714 vsnprintf+0xa5d/0x1960 lib/vsprintf.c:2843 __request_module+0x252/0x9f0 kernel/module/kmod.c:149 team_mode_get drivers/net/team/team_core.c:480 [inline] team_change_mode drivers/net/team/team_core.c:607 [inline] team_mode_option_set+0x437/0x970 drivers/net/team/team_core.c:1401 team_option_set drivers/net/team/team_core.c:375 [inline] team_nl_options_set_doit+0x1339/0x1f90 drivers/net/team/team_core.c:2662 genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x1214/0x12c0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2543 genl_rcv+0x40/0x60 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:733 ____sys_sendmsg+0x877/0xb60 net/socket.c:2573 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2627 __sys_sendmsg net/socket.c:2659 [inline] __do_sys_sendmsg net/socket.c:2664 [inline] __se_sys_sendmsg net/socket.c:2662 [inline] __x64_sys_sendmsg+0x212/0x3c0 net/socket.c:2662 x64_sys_call+0x2ed6/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: drm/imagination: avoid deadlock on fence release Do scheduler queue fence release processing on a workqueue, rather than in the release function itself. Fixes deadlock issues such as the following: [ 607.400437] ============================================ [ 607.405755] WARNING: possible recursive locking detected [ 607.415500] -------------------------------------------- [ 607.420817] weston:zfq0/24149 is trying to acquire lock: [ 607.426131] ffff000017d041a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: pvr_gem_object_vunmap+0x40/0xc0 [powervr] [ 607.436728] but task is already holding lock: [ 607.442554] ffff000017d105a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: dma_buf_ioctl+0x250/0x554 [ 607.451727] other info that might help us debug this: [ 607.458245] Possible unsafe locking scenario: [ 607.464155] CPU0 [ 607.466601] ---- [ 607.469044] lock(reservation_ww_class_mutex); [ 607.473584] lock(reservation_ww_class_mutex); [ 607.478114] *** DEADLOCK ***

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: bail out when failed to load fw in psp_init_cap_microcode() In function psp_init_cap_microcode(), it should bail out when failed to load firmware, otherwise it may cause invalid memory access.

In the Linux kernel, the following vulnerability has been resolved: ptp: vmclock: Add .owner to vmclock_miscdev_fops Without the .owner field, the module can be unloaded while /dev/vmclock0 is open, leading to an oops.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Clear affinity hint before calling ath12k_pci_free_irq() in error path If a shared IRQ is used by the driver due to platform limitation, then the IRQ affinity hint is set right after the allocation of IRQ vectors in ath12k_pci_msi_alloc(). This does no harm unless one of the functions requesting the IRQ fails and attempt to free the IRQ. This may end up with a warning from the IRQ core that is expecting the affinity hint to be cleared before freeing the IRQ: kernel/irq/manage.c: /* make sure affinity_hint is cleaned up */ if (WARN_ON_ONCE(desc->affinity_hint)) desc->affinity_hint = NULL; So to fix this issue, clear the IRQ affinity hint before calling ath12k_pci_free_irq() in the error path. The affinity will be cleared once again further down the error path due to code organization, but that does no harm.

In the Linux kernel, the following vulnerability has been resolved: iommu: Fix potential memory leak in iopf_queue_remove_device() The iopf_queue_remove_device() helper removes a device from the per-iommu iopf queue when PRI is disabled on the device. It responds to all outstanding iopf's with an IOMMU_PAGE_RESP_INVALID code and detaches the device from the queue. However, it fails to release the group structure that represents a group of iopf's awaiting for a response after responding to the hardware. This can cause a memory leak if iopf_queue_remove_device() is called with pending iopf's. Fix it by calling iopf_free_group() after the iopf group is responded.

In the Linux kernel, the following vulnerability has been resolved: net: gso: fix ownership in __udp_gso_segment In __udp_gso_segment the skb destructor is removed before segmenting the skb but the socket reference is kept as-is. This is an issue if the original skb is later orphaned as we can hit the following bug: kernel BUG at ./include/linux/skbuff.h:3312! (skb_orphan) RIP: 0010:ip_rcv_core+0x8b2/0xca0 Call Trace: ip_rcv+0xab/0x6e0 __netif_receive_skb_one_core+0x168/0x1b0 process_backlog+0x384/0x1100 __napi_poll.constprop.0+0xa1/0x370 net_rx_action+0x925/0xe50 The above can happen following a sequence of events when using OpenVSwitch, when an OVS_ACTION_ATTR_USERSPACE action precedes an OVS_ACTION_ATTR_OUTPUT action: 1. OVS_ACTION_ATTR_USERSPACE is handled (in do_execute_actions): the skb goes through queue_gso_packets and then __udp_gso_segment, where its destructor is removed. 2. The segments' data are copied and sent to userspace. 3. OVS_ACTION_ATTR_OUTPUT is handled (in do_execute_actions) and the same original skb is sent to its path. 4. If it later hits skb_orphan, we hit the bug. Fix this by also removing the reference to the socket in __udp_gso_segment.

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: init wiphy_work before allocating rfkill fails syzbort reported a uninitialize wiphy_work_lock in cfg80211_dev_free. [1] After rfkill allocation fails, the wiphy release process will be performed, which will cause cfg80211_dev_free to access the uninitialized wiphy_work related data. Move the initialization of wiphy_work to before rfkill initialization to avoid this issue. [1] INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. CPU: 0 UID: 0 PID: 5935 Comm: syz-executor550 Not tainted 6.14.0-rc6-syzkaller-00103-g4003c9e78778 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 assign_lock_key kernel/locking/lockdep.c:983 [inline] register_lock_class+0xc39/0x1240 kernel/locking/lockdep.c:1297 __lock_acquire+0x135/0x3c40 kernel/locking/lockdep.c:5103 lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5851 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x3a/0x60 kernel/locking/spinlock.c:162 cfg80211_dev_free+0x30/0x3d0 net/wireless/core.c:1196 device_release+0xa1/0x240 drivers/base/core.c:2568 kobject_cleanup lib/kobject.c:689 [inline] kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x1e4/0x5a0 lib/kobject.c:737 put_device+0x1f/0x30 drivers/base/core.c:3774 wiphy_free net/wireless/core.c:1224 [inline] wiphy_new_nm+0x1c1f/0x2160 net/wireless/core.c:562 ieee80211_alloc_hw_nm+0x1b7a/0x2260 net/mac80211/main.c:835 mac80211_hwsim_new_radio+0x1d6/0x54e0 drivers/net/wireless/virtual/mac80211_hwsim.c:5185 hwsim_new_radio_nl+0xb42/0x12b0 drivers/net/wireless/virtual/mac80211_hwsim.c:6242 genl_family_rcv_msg_doit+0x202/0x2f0 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x565/0x800 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2533 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1882 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg net/socket.c:733 [inline] ____sys_sendmsg+0xaaf/0xc90 net/socket.c:2573 ___sys_sendmsg+0x135/0x1e0 net/socket.c:2627 __sys_sendmsg+0x16e/0x220 net/socket.c:2659 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 Close: https://syzkaller.appspot.com/bug?extid=aaf0488c83d1d5f4f029

In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: reject cooked mode if it is set along with other flags It is possible to set both MONITOR_FLAG_COOK_FRAMES and MONITOR_FLAG_ACTIVE flags simultaneously on the same monitor interface from the userspace. This causes a sub-interface to be created with no IEEE80211_SDATA_IN_DRIVER bit set because the monitor interface is in the cooked state and it takes precedence over all other states. When the interface is then being deleted the kernel calls WARN_ONCE() from check_sdata_in_driver() because of missing that bit. Fix this by rejecting MONITOR_FLAG_COOK_FRAMES if it is set along with other flags. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: net: rose: lock the socket in rose_bind() syzbot reported a soft lockup in rose_loopback_timer(), with a repro calling bind() from multiple threads. rose_bind() must lock the socket to avoid this issue.

In the Linux kernel, the following vulnerability has been resolved: cpufreq/amd-pstate: Fix cpufreq_policy ref counting amd_pstate_update_limits() takes a cpufreq_policy reference but doesn't decrement the refcount in one of the exit paths, fix that.

In the Linux kernel, the following vulnerability has been resolved: fbdev: omap: use threaded IRQ for LCD DMA When using touchscreen and framebuffer, Nokia 770 crashes easily with: BUG: scheduling while atomic: irq/144-ads7846/82/0x00010000 Modules linked in: usb_f_ecm g_ether usb_f_rndis u_ether libcomposite configfs omap_udc ohci_omap ohci_hcd CPU: 0 UID: 0 PID: 82 Comm: irq/144-ads7846 Not tainted 6.12.7-770 #2 Hardware name: Nokia 770 Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x54/0x5c dump_stack_lvl from __schedule_bug+0x50/0x70 __schedule_bug from __schedule+0x4d4/0x5bc __schedule from schedule+0x34/0xa0 schedule from schedule_preempt_disabled+0xc/0x10 schedule_preempt_disabled from __mutex_lock.constprop.0+0x218/0x3b4 __mutex_lock.constprop.0 from clk_prepare_lock+0x38/0xe4 clk_prepare_lock from clk_set_rate+0x18/0x154 clk_set_rate from sossi_read_data+0x4c/0x168 sossi_read_data from hwa742_read_reg+0x5c/0x8c hwa742_read_reg from send_frame_handler+0xfc/0x300 send_frame_handler from process_pending_requests+0x74/0xd0 process_pending_requests from lcd_dma_irq_handler+0x50/0x74 lcd_dma_irq_handler from __handle_irq_event_percpu+0x44/0x130 __handle_irq_event_percpu from handle_irq_event+0x28/0x68 handle_irq_event from handle_level_irq+0x9c/0x170 handle_level_irq from generic_handle_domain_irq+0x2c/0x3c generic_handle_domain_irq from omap1_handle_irq+0x40/0x8c omap1_handle_irq from generic_handle_arch_irq+0x28/0x3c generic_handle_arch_irq from call_with_stack+0x1c/0x24 call_with_stack from __irq_svc+0x94/0xa8 Exception stack(0xc5255da0 to 0xc5255de8) 5da0: 00000001 c22fc620 00000000 00000000 c08384a8 c106fc00 00000000 c240c248 5dc0: c113a600 c3f6ec30 00000001 00000000 c22fc620 c5255df0 c22fc620 c0279a94 5de0: 60000013 ffffffff __irq_svc from clk_prepare_lock+0x4c/0xe4 clk_prepare_lock from clk_get_rate+0x10/0x74 clk_get_rate from uwire_setup_transfer+0x40/0x180 uwire_setup_transfer from spi_bitbang_transfer_one+0x2c/0x9c spi_bitbang_transfer_one from spi_transfer_one_message+0x2d0/0x664 spi_transfer_one_message from __spi_pump_transfer_message+0x29c/0x498 __spi_pump_transfer_message from __spi_sync+0x1f8/0x2e8 __spi_sync from spi_sync+0x24/0x40 spi_sync from ads7846_halfd_read_state+0x5c/0x1c0 ads7846_halfd_read_state from ads7846_irq+0x58/0x348 ads7846_irq from irq_thread_fn+0x1c/0x78 irq_thread_fn from irq_thread+0x120/0x228 irq_thread from kthread+0xc8/0xe8 kthread from ret_from_fork+0x14/0x28 As a quick fix, switch to a threaded IRQ which provides a stable system.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Set hugetlb mmap base address aligned with pmd size With ltp test case "testcases/bin/hugefork02", there is a dmesg error report message such as: kernel BUG at mm/hugetlb.c:5550! Oops - BUG[#1]: CPU: 0 UID: 0 PID: 1517 Comm: hugefork02 Not tainted 6.14.0-rc2+ #241 Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 pc 90000000004eaf1c ra 9000000000485538 tp 900000010edbc000 sp 900000010edbf940 a0 900000010edbfb00 a1 9000000108d20280 a2 00007fffe9474000 a3 00007ffff3474000 a4 0000000000000000 a5 0000000000000003 a6 00000000003cadd3 a7 0000000000000000 t0 0000000001ffffff t1 0000000001474000 t2 900000010ecd7900 t3 00007fffe9474000 t4 00007fffe9474000 t5 0000000000000040 t6 900000010edbfb00 t7 0000000000000001 t8 0000000000000005 u0 90000000004849d0 s9 900000010edbfa00 s0 9000000108d20280 s1 00007fffe9474000 s2 0000000002000000 s3 9000000108d20280 s4 9000000002b38b10 s5 900000010edbfb00 s6 00007ffff3474000 s7 0000000000000406 s8 900000010edbfa08 ra: 9000000000485538 unmap_vmas+0x130/0x218 ERA: 90000000004eaf1c __unmap_hugepage_range+0x6f4/0x7d0 PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000007 (+FPE +SXE +ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0) PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) Process hugefork02 (pid: 1517, threadinfo=00000000a670eaf4, task=000000007a95fc64) Call Trace: [<90000000004eaf1c>] __unmap_hugepage_range+0x6f4/0x7d0 [<9000000000485534>] unmap_vmas+0x12c/0x218 [<9000000000494068>] exit_mmap+0xe0/0x308 [<900000000025fdc4>] mmput+0x74/0x180 [<900000000026a284>] do_exit+0x294/0x898 [<900000000026aa30>] do_group_exit+0x30/0x98 [<900000000027bed4>] get_signal+0x83c/0x868 [<90000000002457b4>] arch_do_signal_or_restart+0x54/0xfa0 [<90000000015795e8>] irqentry_exit_to_user_mode+0xb8/0x138 [<90000000002572d0>] tlb_do_page_fault_1+0x114/0x1b4 The problem is that base address allocated from hugetlbfs is not aligned with pmd size. Here add a checking for hugetlbfs and align base address with pmd size. After this patch the test case "testcases/bin/hugefork02" passes to run. This is similar to the commit 7f24cbc9c4d42db8a3c8484d1 ("mm/mmap: teach generic_get_unmapped_area{_topdown} to handle hugetlb mappings").

In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix a deadlock when recovering state on a sillyrenamed file If the file is sillyrenamed, and slated for delete on close, it is possible for a server reboot to triggeer an open reclaim, with can again race with the application call to close(). When that happens, the call to put_nfs_open_context() can trigger a synchronous delegreturn call which deadlocks because it is not marked as privileged. Instead, ensure that the call to nfs4_inode_return_delegation_on_close() catches the delegreturn, and schedules it asynchronously.

In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Fix a use of uninitialized mutex commit c8347f915e67 ("gpu: host1x: Fix boot regression for Tegra") caused a use of uninitialized mutex leading to below warning when CONFIG_DEBUG_MUTEXES and CONFIG_DEBUG_LOCK_ALLOC are enabled. [ 41.662843] ------------[ cut here ]------------ [ 41.663012] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 41.663035] WARNING: CPU: 4 PID: 794 at kernel/locking/mutex.c:587 __mutex_lock+0x670/0x878 [ 41.663458] Modules linked in: rtw88_8822c(+) bluetooth(+) rtw88_pci rtw88_core mac80211 aquantia libarc4 crc_itu_t cfg80211 tegra194_cpufreq dwmac_tegra(+) arm_dsu_pmu stmmac_platform stmmac pcs_xpcs rfkill at24 host1x(+) tegra_bpmp_thermal ramoops reed_solomon fuse loop nfnetlink xfs mmc_block rpmb_core ucsi_ccg ina3221 crct10dif_ce xhci_tegra ghash_ce lm90 sha2_ce sha256_arm64 sha1_ce sdhci_tegra pwm_fan sdhci_pltfm sdhci gpio_keys rtc_tegra cqhci mmc_core phy_tegra_xusb i2c_tegra tegra186_gpc_dma i2c_tegra_bpmp spi_tegra114 dm_mirror dm_region_hash dm_log dm_mod [ 41.665078] CPU: 4 UID: 0 PID: 794 Comm: (udev-worker) Not tainted 6.11.0-29.31_1538613708.el10.aarch64+debug #1 [ 41.665838] Hardware name: NVIDIA NVIDIA Jetson AGX Orin Developer Kit/Jetson, BIOS 36.3.0-gcid-35594366 02/26/2024 [ 41.672555] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 41.679636] pc : __mutex_lock+0x670/0x878 [ 41.683834] lr : __mutex_lock+0x670/0x878 [ 41.688035] sp : ffff800084b77090 [ 41.691446] x29: ffff800084b77160 x28: ffffdd4bebf7b000 x27: ffffdd4be96b1000 [ 41.698799] x26: 1fffe0002308361c x25: 1ffff0001096ee18 x24: 0000000000000000 [ 41.706149] x23: 0000000000000000 x22: 0000000000000002 x21: ffffdd4be6e3c7a0 [ 41.713500] x20: ffff800084b770f0 x19: ffff00011841b1e8 x18: 0000000000000000 [ 41.720675] x17: 0000000000000000 x16: 0000000000000000 x15: 0720072007200720 [ 41.728023] x14: 0000000000000000 x13: 0000000000000001 x12: ffff6001a96eaab3 [ 41.735375] x11: 1fffe001a96eaab2 x10: ffff6001a96eaab2 x9 : ffffdd4be4838bbc [ 41.742723] x8 : 00009ffe5691554e x7 : ffff000d4b755593 x6 : 0000000000000001 [ 41.749985] x5 : ffff000d4b755590 x4 : 1fffe0001d88f001 x3 : dfff800000000000 [ 41.756988] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000ec478000 [ 41.764251] Call trace: [ 41.766695] __mutex_lock+0x670/0x878 [ 41.770373] mutex_lock_nested+0x2c/0x40 [ 41.774134] host1x_intr_start+0x54/0xf8 [host1x] [ 41.778863] host1x_runtime_resume+0x150/0x228 [host1x] [ 41.783935] pm_generic_runtime_resume+0x84/0xc8 [ 41.788485] __rpm_callback+0xa0/0x478 [ 41.792422] rpm_callback+0x15c/0x1a8 [ 41.795922] rpm_resume+0x698/0xc08 [ 41.799597] __pm_runtime_resume+0xa8/0x140 [ 41.803621] host1x_probe+0x810/0xbc0 [host1x] [ 41.807909] platform_probe+0xcc/0x1a8 [ 41.811845] really_probe+0x188/0x800 [ 41.815347] __driver_probe_device+0x164/0x360 [ 41.819810] driver_probe_device+0x64/0x1a8 [ 41.823834] __driver_attach+0x180/0x490 [ 41.827773] bus_for_each_dev+0x104/0x1a0 [ 41.831797] driver_attach+0x44/0x68 [ 41.835296] bus_add_driver+0x23c/0x4e8 [ 41.839235] driver_register+0x15c/0x3a8 [ 41.843170] __platform_register_drivers+0xa4/0x208 [ 41.848159] tegra_host1x_init+0x4c/0xff8 [host1x] [ 41.853147] do_one_initcall+0xd4/0x380 [ 41.856997] do_init_module+0x1dc/0x698 [ 41.860758] load_module+0xc70/0x1300 [ 41.864435] __do_sys_init_module+0x1a8/0x1d0 [ 41.868721] __arm64_sys_init_module+0x74/0xb0 [ 41.873183] invoke_syscall.constprop.0+0xdc/0x1e8 [ 41.877997] do_el0_svc+0x154/0x1d0 [ 41.881671] el0_svc+0x54/0x140 [ 41.884820] el0t_64_sync_handler+0x120/0x130 [ 41.889285] el0t_64_sync+0x1a4/0x1a8 [ 41.892960] irq event stamp: 69737 [ 41.896370] hardirqs last enabled at (69737): [<ffffdd4be6d7768c>] _raw_spin_unlock_irqrestore+0x44/0xe8 [ 41.905739] hardirqs last disabled at (69736): ---truncated---

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Fix kernel panic during FW release This fixes a kernel panic seen during release FW in a stress test scenario where WLAN and BT FW download occurs simultaneously, and due to a HW bug, chip sends out only 1 bootloader signatures. When driver receives the bootloader signature, it enters FW download mode, but since no consequtive bootloader signatures seen, FW file is not requested. After 60 seconds, when FW download times out, release_firmware causes a kernel panic. [ 2601.949184] Unable to handle kernel paging request at virtual address 0000312e6f006573 [ 2601.992076] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000111802000 [ 2601.992080] [0000312e6f006573] pgd=0000000000000000, p4d=0000000000000000 [ 2601.992087] Internal error: Oops: 0000000096000021 [#1] PREEMPT SMP [ 2601.992091] Modules linked in: algif_hash algif_skcipher af_alg btnxpuart(O) pciexxx(O) mlan(O) overlay fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine authenc libdes crct10dif_ce polyval_ce snd_soc_fsl_easrc snd_soc_fsl_asoc_card imx8_media_dev(C) snd_soc_fsl_micfil polyval_generic snd_soc_fsl_xcvr snd_soc_fsl_sai snd_soc_imx_audmux snd_soc_fsl_asrc snd_soc_imx_card snd_soc_imx_hdmi snd_soc_fsl_aud2htx snd_soc_fsl_utils imx_pcm_dma dw_hdmi_cec flexcan can_dev [ 2602.001825] CPU: 2 PID: 20060 Comm: hciconfig Tainted: G C O 6.6.23-lts-next-06236-gb586a521770e #1 [ 2602.010182] Hardware name: NXP i.MX8MPlus EVK board (DT) [ 2602.010185] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2602.010191] pc : _raw_spin_lock+0x34/0x68 [ 2602.010201] lr : free_fw_priv+0x20/0xfc [ 2602.020561] sp : ffff800089363b30 [ 2602.020563] x29: ffff800089363b30 x28: ffff0000d0eb5880 x27: 0000000000000000 [ 2602.020570] x26: 0000000000000000 x25: ffff0000d728b330 x24: 0000000000000000 [ 2602.020577] x23: ffff0000dc856f38 [ 2602.033797] x22: ffff800089363b70 x21: ffff0000dc856000 [ 2602.033802] x20: ff00312e6f006573 x19: ffff0000d0d9ea80 x18: 0000000000000000 [ 2602.033809] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaaad80dd480 [ 2602.083320] x14: 0000000000000000 x13: 00000000000001b9 x12: 0000000000000002 [ 2602.083326] x11: 0000000000000000 x10: 0000000000000a60 x9 : ffff800089363a30 [ 2602.083333] x8 : ffff0001793d75c0 x7 : ffff0000d6dbc400 x6 : 0000000000000000 [ 2602.083339] x5 : 00000000410fd030 x4 : 0000000000000000 x3 : 0000000000000001 [ 2602.083346] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ff00312e6f006573 [ 2602.083354] Call trace: [ 2602.083356] _raw_spin_lock+0x34/0x68 [ 2602.083364] release_firmware+0x48/0x6c [ 2602.083370] nxp_setup+0x3c4/0x540 [btnxpuart] [ 2602.083383] hci_dev_open_sync+0xf0/0xa34 [ 2602.083391] hci_dev_open+0xd8/0x178 [ 2602.083399] hci_sock_ioctl+0x3b0/0x590 [ 2602.083405] sock_do_ioctl+0x60/0x118 [ 2602.083413] sock_ioctl+0x2f4/0x374 [ 2602.091430] __arm64_sys_ioctl+0xac/0xf0 [ 2602.091437] invoke_syscall+0x48/0x110 [ 2602.091445] el0_svc_common.constprop.0+0xc0/0xe0 [ 2602.091452] do_el0_svc+0x1c/0x28 [ 2602.091457] el0_svc+0x40/0xe4 [ 2602.091465] el0t_64_sync_handler+0x120/0x12c [ 2602.091470] el0t_64_sync+0x190/0x194

In the Linux kernel, the following vulnerability has been resolved: md/raid1,raid10: don't ignore IO flags If blk-wbt is enabled by default, it's found that raid write performance is quite bad because all IO are throttled by wbt of underlying disks, due to flag REQ_IDLE is ignored. And turns out this behaviour exist since blk-wbt is introduced. Other than REQ_IDLE, other flags should not be ignored as well, for example REQ_META can be set for filesystems, clearing it can cause priority reverse problems; And REQ_NOWAIT should not be cleared as well, because io will wait instead of failing directly in underlying disks. Fix those problems by keep IO flags from master bio. Fises: f51d46d0e7cb ("md: add support for REQ_NOWAIT")

In the Linux kernel, the following vulnerability has been resolved: kernel: be more careful about dup_mmap() failures and uprobe registering If a memory allocation fails during dup_mmap(), the maple tree can be left in an unsafe state for other iterators besides the exit path. All the locks are dropped before the exit_mmap() call (in mm/mmap.c), but the incomplete mm_struct can be reached through (at least) the rmap finding the vmas which have a pointer back to the mm_struct. Up to this point, there have been no issues with being able to find an mm_struct that was only partially initialised. Syzbot was able to make the incomplete mm_struct fail with recent forking changes, so it has been proven unsafe to use the mm_struct that hasn't been initialised, as referenced in the link below. Although 8ac662f5da19f ("fork: avoid inappropriate uprobe access to invalid mm") fixed the uprobe access, it does not completely remove the race. This patch sets the MMF_OOM_SKIP to avoid the iteration of the vmas on the oom side (even though this is extremely unlikely to be selected as an oom victim in the race window), and sets MMF_UNSTABLE to avoid other potential users from using a partially initialised mm_struct. When registering vmas for uprobe, skip the vmas in an mm that is marked unstable. Modifying a vma in an unstable mm may cause issues if the mm isn't fully initialised.

In the Linux kernel, the following vulnerability has been resolved: amdkfd: properly free gang_ctx_bo when failed to init user queue The destructor of a gtt bo is declared as void amdgpu_amdkfd_free_gtt_mem(struct amdgpu_device *adev, void **mem_obj); Which takes void** as the second parameter. GCC allows passing void* to the function because void* can be implicitly casted to any other types, so it can pass compiling. However, passing this void* parameter into the function's execution process(which expects void** and dereferencing void**) will result in errors.

In the Linux kernel, the following vulnerability has been resolved: bus: mhi: host: pci_generic: Use pci_try_reset_function() to avoid deadlock There are multiple places from where the recovery work gets scheduled asynchronously. Also, there are multiple places where the caller waits synchronously for the recovery to be completed. One such place is during the PM shutdown() callback. If the device is not alive during recovery_work, it will try to reset the device using pci_reset_function(). This function internally will take the device_lock() first before resetting the device. By this time, if the lock has already been acquired, then recovery_work will get stalled while waiting for the lock. And if the lock was already acquired by the caller which waits for the recovery_work to be completed, it will lead to deadlock. This is what happened on the X1E80100 CRD device when the device died before shutdown() callback. Driver core calls the driver's shutdown() callback while holding the device_lock() leading to deadlock. And this deadlock scenario can occur on other paths as well, like during the PM suspend() callback, where the driver core would hold the device_lock() before calling driver's suspend() callback. And if the recovery_work was already started, it could lead to deadlock. This is also observed on the X1E80100 CRD. So to fix both issues, use pci_try_reset_function() in recovery_work. This function first checks for the availability of the device_lock() before trying to reset the device. If the lock is available, it will acquire it and reset the device. Otherwise, it will return -EAGAIN. If that happens, recovery_work will fail with the error message "Recovery failed" as not much could be done.

In the Linux kernel, the following vulnerability has been resolved: bpf: avoid holding freeze_mutex during mmap operation We use map->freeze_mutex to prevent races between map_freeze() and memory mapping BPF map contents with writable permissions. The way we naively do this means we'll hold freeze_mutex for entire duration of all the mm and VMA manipulations, which is completely unnecessary. This can potentially also lead to deadlocks, as reported by syzbot in [0]. So, instead, hold freeze_mutex only during writeability checks, bump (proactively) "write active" count for the map, unlock the mutex and proceed with mmap logic. And only if something went wrong during mmap logic, then undo that "write active" counter increment. [0] https://lore.kernel.org/bpf/678dcbc9.050a0220.303755.0066.GAE@google.com/

In the Linux kernel, the following vulnerability has been resolved: net: mctp: unshare packets when reassembling Ensure that the frag_list used for reassembly isn't shared with other packets. This avoids incorrect reassembly when packets are cloned, and prevents a memory leak due to circular references between fragments and their skb_shared_info. The upcoming MCTP-over-USB driver uses skb_clone which can trigger the problem - other MCTP drivers don't share SKBs. A kunit test is added to reproduce the issue.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix integer overflows on 32 bit systems On 32bit systems the addition operations in ipc_msg_alloc() can potentially overflow leading to memory corruption. Add bounds checking using KSMBD_IPC_MAX_PAYLOAD to avoid overflow.

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix integer overflow while processing acregmax mount option User-provided mount parameter acregmax of type u32 is intended to have an upper limit, but before it is validated, the value is converted from seconds to jiffies which can lead to an integer overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix memleak of nhc_pcpu_rth_output in fib_check_nh_v6_gw(). fib_check_nh_v6_gw() expects that fib6_nh_init() cleans up everything when it fails. Commit 7dd73168e273 ("ipv6: Always allocate pcpu memory in a fib6_nh") moved fib_nh_common_init() before alloc_percpu_gfp() within fib6_nh_init() but forgot to add cleanup for fib6_nh->nh_common.nhc_pcpu_rth_output in case it fails to allocate fib6_nh->rt6i_pcpu, resulting in memleak. Let's call fib_nh_common_release() and clear nhc_pcpu_rth_output in the error path. Note that we can remove the fib6_nh_release() call in nh_create_ipv6() later in net-next.git.

In the Linux kernel, the following vulnerability has been resolved: idpf: fix checksums set in idpf_rx_rsc() idpf_rx_rsc() uses skb_transport_offset(skb) while the transport header is not set yet. This triggers the following warning for CONFIG_DEBUG_NET=y builds. DEBUG_NET_WARN_ON_ONCE(!skb_transport_header_was_set(skb)) [ 69.261620] WARNING: CPU: 7 PID: 0 at ./include/linux/skbuff.h:3020 idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261629] Modules linked in: vfat fat dummy bridge intel_uncore_frequency_tpmi intel_uncore_frequency_common intel_vsec_tpmi idpf intel_vsec cdc_ncm cdc_eem cdc_ether usbnet mii xhci_pci xhci_hcd ehci_pci ehci_hcd libeth [ 69.261644] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Tainted: G S W 6.14.0-smp-DEV #1697 [ 69.261648] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN [ 69.261650] RIP: 0010:idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261677] ? __warn (kernel/panic.c:242 kernel/panic.c:748) [ 69.261682] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261687] ? report_bug (lib/bug.c:?) [ 69.261690] ? handle_bug (arch/x86/kernel/traps.c:285) [ 69.261694] ? exc_invalid_op (arch/x86/kernel/traps.c:309) [ 69.261697] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621) [ 69.261700] ? __pfx_idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:4011) idpf [ 69.261704] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261708] ? idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:3072) idpf [ 69.261712] __napi_poll (net/core/dev.c:7194) [ 69.261716] net_rx_action (net/core/dev.c:7265) [ 69.261718] ? __qdisc_run (net/sched/sch_generic.c:293) [ 69.261721] ? sched_clock (arch/x86/include/asm/preempt.h:84 arch/x86/kernel/tsc.c:288) [ 69.261726] handle_softirqs (kernel/softirq.c:561)

In the Linux kernel, the following vulnerability has been resolved: filemap: avoid truncating 64-bit offset to 32 bits On 32-bit kernels, folio_seek_hole_data() was inadvertently truncating a 64-bit value to 32 bits, leading to a possible infinite loop when writing to an xfs filesystem.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't flush non-uploaded STAs If STA state is pre-moved to AUTHORIZED (such as in IBSS scenarios) and insertion fails, the station is freed. In this case, the driver never knew about the station, so trying to flush it is unexpected and may crash. Check if the sta was uploaded to the driver before and fix this.

In the Linux kernel, the following vulnerability has been resolved: ceph: fix memory leak in ceph_mds_auth_match() We now free the temporary target path substring allocation on every possible branch, instead of omitting the default branch. In some cases, a memory leak occured, which could rapidly crash the system (depending on how many file accesses were attempted). This was detected in production because it caused a continuous memory growth, eventually triggering kernel OOM and completely hard-locking the kernel. Relevant kmemleak stacktrace: unreferenced object 0xffff888131e69900 (size 128): comm "git", pid 66104, jiffies 4295435999 hex dump (first 32 bytes): 76 6f 6c 75 6d 65 73 2f 63 6f 6e 74 61 69 6e 65 volumes/containe 72 73 2f 67 69 74 65 61 2f 67 69 74 65 61 2f 67 rs/gitea/gitea/g backtrace (crc 2f3bb450): [<ffffffffaa68fb49>] __kmalloc_noprof+0x359/0x510 [<ffffffffc32bf1df>] ceph_mds_check_access+0x5bf/0x14e0 [ceph] [<ffffffffc3235722>] ceph_open+0x312/0xd80 [ceph] [<ffffffffaa7dd786>] do_dentry_open+0x456/0x1120 [<ffffffffaa7e3729>] vfs_open+0x79/0x360 [<ffffffffaa832875>] path_openat+0x1de5/0x4390 [<ffffffffaa834fcc>] do_filp_open+0x19c/0x3c0 [<ffffffffaa7e44a1>] do_sys_openat2+0x141/0x180 [<ffffffffaa7e4945>] __x64_sys_open+0xe5/0x1a0 [<ffffffffac2cc2f7>] do_syscall_64+0xb7/0x210 [<ffffffffac400130>] entry_SYSCALL_64_after_hwframe+0x77/0x7f It can be triggered by mouting a subdirectory of a CephFS filesystem, and then trying to access files on this subdirectory with an auth token using a path-scoped capability: $ ceph auth get client.services [client.services] key = REDACTED caps mds = "allow rw fsname=cephfs path=/volumes/" caps mon = "allow r fsname=cephfs" caps osd = "allow rw tag cephfs data=cephfs" $ cat /proc/self/mounts services@[REDACTED].cephfs=/volumes/containers /ceph/containers ceph rw,noatime,name=services,secret=<hidden>,ms_mode=prefer-crc,mount_timeout=300,acl,mon_addr=[REDACTED]:3300,recover_session=clean 0 0 $ seq 1 1000000 | xargs -P32 --replace={} touch /ceph/containers/file-{} && \ seq 1 1000000 | xargs -P32 --replace={} cat /ceph/containers/file-{} [ idryomov: combine if statements, rename rc to path_matched and make it a bool, formatting ]

In the Linux kernel, the following vulnerability has been resolved: fs/netfs/read_collect: add to next->prev_donated If multiple subrequests donate data to the same "next" request (depending on the subrequest completion order), each of them would overwrite the `prev_donated` field, causing data corruption and a BUG() crash ("Can't donate prior to front").

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Ensure job pointer is set to NULL after job completion After a job completes, the corresponding pointer in the device must be set to NULL. Failing to do so triggers a warning when unloading the driver, as it appears the job is still active. To prevent this, assign the job pointer to NULL after completing the job, indicating the job has finished.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Add sync after creating vram bo There will be data corruption on vram allocated by svm if the initialization is not complete and application is writting on the memory. Adding sync to wait for the initialization completion is to resolve this issue.

In the Linux kernel, the following vulnerability has been resolved: usb: atm: cxacru: fix a flaw in existing endpoint checks Syzbot once again identified a flaw in usb endpoint checking, see [1]. This time the issue stems from a commit authored by me (2eabb655a968 ("usb: atm: cxacru: fix endpoint checking in cxacru_bind()")). While using usb_find_common_endpoints() may usually be enough to discard devices with wrong endpoints, in this case one needs more than just finding and identifying the sufficient number of endpoints of correct types - one needs to check the endpoint's address as well. Since cxacru_bind() fills URBs with CXACRU_EP_CMD address in mind, switch the endpoint verification approach to usb_check_XXX_endpoints() instead to fix incomplete ep testing. [1] Syzbot report: usb 5-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 0 PID: 1378 at drivers/usb/core/urb.c:504 usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503 ... RIP: 0010:usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503 ... Call Trace: <TASK> cxacru_cm+0x3c8/0xe50 drivers/usb/atm/cxacru.c:649 cxacru_card_status drivers/usb/atm/cxacru.c:760 [inline] cxacru_bind+0xcf9/0x1150 drivers/usb/atm/cxacru.c:1223 usbatm_usb_probe+0x314/0x1d30 drivers/usb/atm/usbatm.c:1058 cxacru_usb_probe+0x184/0x220 drivers/usb/atm/cxacru.c:1377 usb_probe_interface+0x641/0xbb0 drivers/usb/core/driver.c:396 really_probe+0x2b9/0xad0 drivers/base/dd.c:658 __driver_probe_device+0x1a2/0x390 drivers/base/dd.c:800 driver_probe_device+0x50/0x430 drivers/base/dd.c:830 ...

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix implicit ODP hang on parent deregistration Fix the destroy_unused_implicit_child_mr() to prevent hanging during parent deregistration as of below [1]. Upon entering destroy_unused_implicit_child_mr(), the reference count for the implicit MR parent is incremented using: refcount_inc_not_zero(). A corresponding decrement must be performed if free_implicit_child_mr_work() is not called. The code has been updated to properly manage the reference count that was incremented. [1] INFO: task python3:2157 blocked for more than 120 seconds. Not tainted 6.12.0-rc7+ #1633 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:python3 state:D stack:0 pid:2157 tgid:2157 ppid:1685 flags:0x00000000 Call Trace: <TASK> __schedule+0x420/0xd30 schedule+0x47/0x130 __mlx5_ib_dereg_mr+0x379/0x5d0 [mlx5_ib] ? __pfx_autoremove_wake_function+0x10/0x10 ib_dereg_mr_user+0x5f/0x120 [ib_core] ? lock_release+0xc6/0x280 destroy_hw_idr_uobject+0x1d/0x60 [ib_uverbs] uverbs_destroy_uobject+0x58/0x1d0 [ib_uverbs] uobj_destroy+0x3f/0x70 [ib_uverbs] ib_uverbs_cmd_verbs+0x3e4/0xbb0 [ib_uverbs] ? __pfx_uverbs_destroy_def_handler+0x10/0x10 [ib_uverbs] ? lock_acquire+0xc1/0x2f0 ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] ? ib_uverbs_ioctl+0x116/0x170 [ib_uverbs] ? lock_release+0xc6/0x280 ib_uverbs_ioctl+0xe7/0x170 [ib_uverbs] ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] __x64_sys_ioctl+0x1b0/0xa70 ? kmem_cache_free+0x221/0x400 do_syscall_64+0x6b/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f20f21f017b RSP: 002b:00007ffcfc4a77c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffcfc4a78d8 RCX: 00007f20f21f017b RDX: 00007ffcfc4a78c0 RSI: 00000000c0181b01 RDI: 0000000000000003 RBP: 00007ffcfc4a78a0 R08: 000056147d125190 R09: 00007f20f1f14c60 R10: 0000000000000001 R11: 0000000000000246 R12: 00007ffcfc4a7890 R13: 000000000000001c R14: 000056147d100fc0 R15: 00007f20e365c9d0 </TASK>

In the Linux kernel, the following vulnerability has been resolved: ipv4: use RCU protection in __ip_rt_update_pmtu() __ip_rt_update_pmtu() must use RCU protection to make sure the net structure it reads does not disappear.

In the Linux kernel, the following vulnerability has been resolved: NFS: fix nfs_release_folio() to not deadlock via kcompactd writeback Add PF_KCOMPACTD flag and current_is_kcompactd() helper to check for it so nfs_release_folio() can skip calling nfs_wb_folio() from kcompactd. Otherwise NFS can deadlock waiting for kcompactd enduced writeback which recurses back to NFS (which triggers writeback to NFSD via NFS loopback mount on the same host, NFSD blocks waiting for XFS's call to __filemap_get_folio): 6070.550357] INFO: task kcompactd0:58 blocked for more than 4435 seconds. {--- [58] "kcompactd0" [<0>] folio_wait_bit+0xe8/0x200 [<0>] folio_wait_writeback+0x2b/0x80 [<0>] nfs_wb_folio+0x80/0x1b0 [nfs] [<0>] nfs_release_folio+0x68/0x130 [nfs] [<0>] split_huge_page_to_list_to_order+0x362/0x840 [<0>] migrate_pages_batch+0x43d/0xb90 [<0>] migrate_pages_sync+0x9a/0x240 [<0>] migrate_pages+0x93c/0x9f0 [<0>] compact_zone+0x8e2/0x1030 [<0>] compact_node+0xdb/0x120 [<0>] kcompactd+0x121/0x2e0 [<0>] kthread+0xcf/0x100 [<0>] ret_from_fork+0x31/0x40 [<0>] ret_from_fork_asm+0x1a/0x30 ---} [akpm@linux-foundation.org: fix build]

In the Linux kernel, the following vulnerability has been resolved: ARM: dts: bcm2711: Fix xHCI power-domain During s2idle tests on the Raspberry CM4 the VPU firmware always crashes on xHCI power-domain resume: root@raspberrypi:/sys/power# echo freeze > state [ 70.724347] xhci_suspend finished [ 70.727730] xhci_plat_suspend finished [ 70.755624] bcm2835-power bcm2835-power: Power grafx off [ 70.761127] USB: Set power to 0 [ 74.653040] USB: Failed to set power to 1 (-110) This seems to be caused because of the mixed usage of raspberrypi-power and bcm2835-power at the same time. So avoid the usage of the VPU firmware power-domain driver, which prevents the VPU crash.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: clean up ROC on failure If the firmware fails to start the session protection, then we do call iwl_mvm_roc_finished() here, but that won't do anything at all because IWL_MVM_STATUS_ROC_P2P_RUNNING was never set. Set IWL_MVM_STATUS_ROC_P2P_RUNNING in the failure/stop path. If it started successfully before, it's already set, so that doesn't matter, and if it didn't start it needs to be set to clean up. Not doing so will lead to a WARN_ON() later on a fresh remain- on-channel, since the link is already active when activated as it was never deactivated.

In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: remove kernfs active break A warning was found: WARNING: CPU: 10 PID: 3486953 at fs/kernfs/file.c:828 CPU: 10 PID: 3486953 Comm: rmdir Kdump: loaded Tainted: G RIP: 0010:kernfs_should_drain_open_files+0x1a1/0x1b0 RSP: 0018:ffff8881107ef9e0 EFLAGS: 00010202 RAX: 0000000080000002 RBX: ffff888154738c00 RCX: dffffc0000000000 RDX: 0000000000000007 RSI: 0000000000000004 RDI: ffff888154738c04 RBP: ffff888154738c04 R08: ffffffffaf27fa15 R09: ffffed102a8e7180 R10: ffff888154738c07 R11: 0000000000000000 R12: ffff888154738c08 R13: ffff888750f8c000 R14: ffff888750f8c0e8 R15: ffff888154738ca0 FS: 00007f84cd0be740(0000) GS:ffff8887ddc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555f9fbe00c8 CR3: 0000000153eec001 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: kernfs_drain+0x15e/0x2f0 __kernfs_remove+0x165/0x300 kernfs_remove_by_name_ns+0x7b/0xc0 cgroup_rm_file+0x154/0x1c0 cgroup_addrm_files+0x1c2/0x1f0 css_clear_dir+0x77/0x110 kill_css+0x4c/0x1b0 cgroup_destroy_locked+0x194/0x380 cgroup_rmdir+0x2a/0x140 It can be explained by: rmdir echo 1 > cpuset.cpus kernfs_fop_write_iter // active=0 cgroup_rm_file kernfs_remove_by_name_ns kernfs_get_active // active=1 __kernfs_remove // active=0x80000002 kernfs_drain cpuset_write_resmask wait_event //waiting (active == 0x80000001) kernfs_break_active_protection // active = 0x80000001 // continue kernfs_unbreak_active_protection // active = 0x80000002 ... kernfs_should_drain_open_files // warning occurs kernfs_put_active This warning is caused by 'kernfs_break_active_protection' when it is writing to cpuset.cpus, and the cgroup is removed concurrently. The commit 3a5a6d0c2b03 ("cpuset: don't nest cgroup_mutex inside get_online_cpus()") made cpuset_hotplug_workfn asynchronous, This change involves calling flush_work(), which can create a multiple processes circular locking dependency that involve cgroup_mutex, potentially leading to a deadlock. To avoid deadlock. the commit 76bb5ab8f6e3 ("cpuset: break kernfs active protection in cpuset_write_resmask()") added 'kernfs_break_active_protection' in the cpuset_write_resmask. This could lead to this warning. After the commit 2125c0034c5d ("cgroup/cpuset: Make cpuset hotplug processing synchronous"), the cpuset_write_resmask no longer needs to wait the hotplug to finish, which means that concurrent hotplug and cpuset operations are no longer possible. Therefore, the deadlock doesn't exist anymore and it does not have to 'break active protection' now. To fix this warning, just remove kernfs_break_active_protection operation in the 'cpuset_write_resmask'.

In the Linux kernel, the following vulnerability has been resolved: PCI: Avoid putting some root ports into D3 on TUXEDO Sirius Gen1 commit 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend") sets the policy that all PCIe ports are allowed to use D3. When the system is suspended if the port is not power manageable by the platform and won't be used for wakeup via a PME this sets up the policy for these ports to go into D3hot. This policy generally makes sense from an OSPM perspective but it leads to problems with wakeup from suspend on the TUXEDO Sirius 16 Gen 1 with a specific old BIOS. This manifests as a system hang. On the affected Device + BIOS combination, add a quirk for the root port of the problematic controller to ensure that these root ports are not put into D3hot at suspend. This patch is based on https://lore.kernel.org/linux-pci/20230708214457.1229-2-mario.limonciello@amd.com but with the added condition both in the documentation and in the code to apply only to the TUXEDO Sirius 16 Gen 1 with a specific old BIOS and only the affected root ports.

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: fix uninitialized size issue in radeon_vce_cs_parse() On the off chance that command stream passed from userspace via ioctl() call to radeon_vce_cs_parse() is weirdly crafted and first command to execute is to encode (case 0x03000001), the function in question will attempt to call radeon_vce_cs_reloc() with size argument that has not been properly initialized. Specifically, 'size' will point to 'tmp' variable before the latter had a chance to be assigned any value. Play it safe and init 'tmp' with 0, thus ensuring that radeon_vce_cs_reloc() will catch an early error in cases like these. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. (cherry picked from commit 2d52de55f9ee7aaee0e09ac443f77855989c6b68)

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix incorrect validation for num_aces field of smb_acl parse_dcal() validate num_aces to allocate posix_ace_state_array. if (num_aces > ULONG_MAX / sizeof(struct smb_ace *)) It is an incorrect validation that we can create an array of size ULONG_MAX. smb_acl has ->size field to calculate actual number of aces in request buffer size. Use this to check invalid num_aces.