In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix list protocols enumeration in the base protocol While enumerating protocols implemented by the SCMI platform using BASE_DISCOVER_LIST_PROTOCOLS, the number of returned protocols is currently validated in an improper way since the check employs a sum between unsigned integers that could overflow and cause the check itself to be silently bypassed if the returned value 'loop_num_ret' is big enough. Fix the validation avoiding the addition.

In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: Fix missing of_node_put in mt2701_wm8960_machine_probe This node pointer is returned by of_parse_phandle() with refcount incremented in this function. Calling of_node_put() to avoid the refcount leak.

In the Linux kernel, the following vulnerability has been resolved: ovl: Use "buf" flexible array for memcpy() destination The "buf" flexible array needs to be the memcpy() destination to avoid false positive run-time warning from the recent FORTIFY_SOURCE hardening: memcpy: detected field-spanning write (size 93) of single field "&fh->fb" at fs/overlayfs/export.c:799 (size 21)

In the Linux kernel, the following vulnerability has been resolved: igb: Do not bring the device up after non-fatal error Commit 004d25060c78 ("igb: Fix igb_down hung on surprise removal") changed igb_io_error_detected() to ignore non-fatal pcie errors in order to avoid hung task that can happen when igb_down() is called multiple times. This caused an issue when processing transient non-fatal errors. igb_io_resume(), which is called after igb_io_error_detected(), assumes that device is brought down by igb_io_error_detected() if the interface is up. This resulted in panic with stacktrace below. [ T3256] igb 0000:09:00.0 haeth0: igb: haeth0 NIC Link is Down [ T292] pcieport 0000:00:1c.5: AER: Uncorrected (Non-Fatal) error received: 0000:09:00.0 [ T292] igb 0000:09:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID) [ T292] igb 0000:09:00.0: device [8086:1537] error status/mask=00004000/00000000 [ T292] igb 0000:09:00.0: [14] CmpltTO [ 200.105524,009][ T292] igb 0000:09:00.0: AER: TLP Header: 00000000 00000000 00000000 00000000 [ T292] pcieport 0000:00:1c.5: AER: broadcast error_detected message [ T292] igb 0000:09:00.0: Non-correctable non-fatal error reported. [ T292] pcieport 0000:00:1c.5: AER: broadcast mmio_enabled message [ T292] pcieport 0000:00:1c.5: AER: broadcast resume message [ T292] ------------[ cut here ]------------ [ T292] kernel BUG at net/core/dev.c:6539! [ T292] invalid opcode: 0000 [#1] PREEMPT SMP [ T292] RIP: 0010:napi_enable+0x37/0x40 [ T292] Call Trace: [ T292] <TASK> [ T292] ? die+0x33/0x90 [ T292] ? do_trap+0xdc/0x110 [ T292] ? napi_enable+0x37/0x40 [ T292] ? do_error_trap+0x70/0xb0 [ T292] ? napi_enable+0x37/0x40 [ T292] ? napi_enable+0x37/0x40 [ T292] ? exc_invalid_op+0x4e/0x70 [ T292] ? napi_enable+0x37/0x40 [ T292] ? asm_exc_invalid_op+0x16/0x20 [ T292] ? napi_enable+0x37/0x40 [ T292] igb_up+0x41/0x150 [ T292] igb_io_resume+0x25/0x70 [ T292] report_resume+0x54/0x70 [ T292] ? report_frozen_detected+0x20/0x20 [ T292] pci_walk_bus+0x6c/0x90 [ T292] ? aer_print_port_info+0xa0/0xa0 [ T292] pcie_do_recovery+0x22f/0x380 [ T292] aer_process_err_devices+0x110/0x160 [ T292] aer_isr+0x1c1/0x1e0 [ T292] ? disable_irq_nosync+0x10/0x10 [ T292] irq_thread_fn+0x1a/0x60 [ T292] irq_thread+0xe3/0x1a0 [ T292] ? irq_set_affinity_notifier+0x120/0x120 [ T292] ? irq_affinity_notify+0x100/0x100 [ T292] kthread+0xe2/0x110 [ T292] ? kthread_complete_and_exit+0x20/0x20 [ T292] ret_from_fork+0x2d/0x50 [ T292] ? kthread_complete_and_exit+0x20/0x20 [ T292] ret_from_fork_asm+0x11/0x20 [ T292] </TASK> To fix this issue igb_io_resume() checks if the interface is running and the device is not down this means igb_io_error_detected() did not bring the device down and there is no need to bring it up.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix deadlock in nilfs_count_free_blocks() A semaphore deadlock can occur if nilfs_get_block() detects metadata corruption while locating data blocks and a superblock writeback occurs at the same time: task 1 task 2 ------ ------ * A file operation * nilfs_truncate() nilfs_get_block() down_read(rwsem A) <-- nilfs_bmap_lookup_contig() ... generic_shutdown_super() nilfs_put_super() * Prepare to write superblock * down_write(rwsem B) <-- nilfs_cleanup_super() * Detect b-tree corruption * nilfs_set_log_cursor() nilfs_bmap_convert_error() nilfs_count_free_blocks() __nilfs_error() down_read(rwsem A) <-- nilfs_set_error() down_write(rwsem B) <-- *** DEADLOCK *** Here, nilfs_get_block() readlocks rwsem A (= NILFS_MDT(dat_inode)->mi_sem) and then calls nilfs_bmap_lookup_contig(), but if it fails due to metadata corruption, __nilfs_error() is called from nilfs_bmap_convert_error() inside the lock section. Since __nilfs_error() calls nilfs_set_error() unless the filesystem is read-only and nilfs_set_error() attempts to writelock rwsem B (= nilfs->ns_sem) to write back superblock exclusively, hierarchical lock acquisition occurs in the order rwsem A -> rwsem B. Now, if another task starts updating the superblock, it may writelock rwsem B during the lock sequence above, and can deadlock trying to readlock rwsem A in nilfs_count_free_blocks(). However, there is actually no need to take rwsem A in nilfs_count_free_blocks() because it, within the lock section, only reads a single integer data on a shared struct with nilfs_sufile_get_ncleansegs(). This has been the case after commit aa474a220180 ("nilfs2: add local variable to cache the number of clean segments"), that is, even before this bug was introduced. So, this resolves the deadlock problem by just not taking the semaphore in nilfs_count_free_blocks().

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Use kzalloc for sev ioctl interfaces to prevent kernel memory leak For some sev ioctl interfaces, input may be passed that is less than or equal to SEV_FW_BLOB_MAX_SIZE, but larger than the data that PSP firmware returns. In this case, kmalloc will allocate memory that is the size of the input rather than the size of the data. Since PSP firmware doesn't fully overwrite the buffer, the sev ioctl interfaces with the issue may return uninitialized slab memory. Currently, all of the ioctl interfaces in the ccp driver are safe, but to prevent future problems, change all ioctl interfaces that allocate memory with kmalloc to use kzalloc and memset the data buffer to zero in sev_ioctl_do_platform_status.

In the Linux kernel, the following vulnerability has been resolved: tty: serial: Fix refcount leak bug in ucc_uart.c In soc_info(), of_find_node_by_type() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: pmac32-cpufreq: Fix refcount leak bug In pmac_cpufreq_init_MacRISC3(), we need to add corresponding of_node_put() for the three node pointers whose refcount have been incremented by of_find_node_by_name().

In the Linux kernel, the following vulnerability has been resolved: usb-storage: alauda: Check whether the media is initialized The member "uzonesize" of struct alauda_info will remain 0 if alauda_init_media() fails, potentially causing divide errors in alauda_read_data() and alauda_write_lba(). - Add a member "media_initialized" to struct alauda_info. - Change a condition in alauda_check_media() to ensure the first initialization. - Add an error check for the return value of alauda_init_media().

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check for inline inode Yanming reported a kernel bug in Bugzilla kernel [1], which can be reproduced. The bug message is: The kernel message is shown below: kernel BUG at fs/inode.c:611! Call Trace: evict+0x282/0x4e0 __dentry_kill+0x2b2/0x4d0 dput+0x2dd/0x720 do_renameat2+0x596/0x970 __x64_sys_rename+0x78/0x90 do_syscall_64+0x3b/0x90 [1] https://bugzilla.kernel.org/show_bug.cgi?id=215895 The bug is due to fuzzed inode has both inline_data and encrypted flags. During f2fs_evict_inode(), as the inode was deleted by rename(), it will cause inline data conversion due to conflicting flags. The page cache will be polluted and the panic will be triggered in clear_inode(). Try fixing the bug by doing more sanity checks for inline data inode in sanity_check_inode().

In the Linux kernel, the following vulnerability has been resolved: i2c: cadence: fix reference leak when pm_runtime_get_sync fails The PM reference count is not expected to be incremented on return in functions cdns_i2c_master_xfer and cdns_reg_slave. However, pm_runtime_get_sync will increment pm usage counter even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced.

In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: Fix error handling in mt8173_max98090_dev_probe Call of_node_put(platform_node) to avoid refcount leak in the error path.

In the Linux kernel, the following vulnerability has been resolved: posix-clock: Fix missing timespec64 check in pc_clock_settime() As Andrew pointed out, it will make sense that the PTP core checked timespec64 struct's tv_sec and tv_nsec range before calling ptp->info->settime64(). As the man manual of clock_settime() said, if tp.tv_sec is negative or tp.tv_nsec is outside the range [0..999,999,999], it should return EINVAL, which include dynamic clocks which handles PTP clock, and the condition is consistent with timespec64_valid(). As Thomas suggested, timespec64_valid() only check the timespec is valid, but not ensure that the time is in a valid range, so check it ahead using timespec64_valid_strict() in pc_clock_settime() and return -EINVAL if not valid. There are some drivers that use tp->tv_sec and tp->tv_nsec directly to write registers without validity checks and assume that the higher layer has checked it, which is dangerous and will benefit from this, such as hclge_ptp_settime(), igb_ptp_settime_i210(), _rcar_gen4_ptp_settime(), and some drivers can remove the checks of itself.

In the Linux kernel, the following vulnerability has been resolved: nbd: Fix hung when signal interrupts nbd_start_device_ioctl() syzbot reported hung task [1]. The following program is a simplified version of the reproducer: int main(void) { int sv[2], fd; if (socketpair(AF_UNIX, SOCK_STREAM, 0, sv) < 0) return 1; if ((fd = open("/dev/nbd0", 0)) < 0) return 1; if (ioctl(fd, NBD_SET_SIZE_BLOCKS, 0x81) < 0) return 1; if (ioctl(fd, NBD_SET_SOCK, sv[0]) < 0) return 1; if (ioctl(fd, NBD_DO_IT) < 0) return 1; return 0; } When signal interrupt nbd_start_device_ioctl() waiting the condition atomic_read(&config->recv_threads) == 0, the task can hung because it waits the completion of the inflight IOs. This patch fixes the issue by clearing queue, not just shutdown, when signal interrupt nbd_start_device_ioctl().

In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: fix uninit-value in mpol_rebind_policy() mpol_set_nodemask()(mm/mempolicy.c) does not set up nodemask when pol->mode is MPOL_LOCAL. Check pol->mode before access pol->w.cpuset_mems_allowed in mpol_rebind_policy()(mm/mempolicy.c). BUG: KMSAN: uninit-value in mpol_rebind_policy mm/mempolicy.c:352 [inline] BUG: KMSAN: uninit-value in mpol_rebind_task+0x2ac/0x2c0 mm/mempolicy.c:368 mpol_rebind_policy mm/mempolicy.c:352 [inline] mpol_rebind_task+0x2ac/0x2c0 mm/mempolicy.c:368 cpuset_change_task_nodemask kernel/cgroup/cpuset.c:1711 [inline] cpuset_attach+0x787/0x15e0 kernel/cgroup/cpuset.c:2278 cgroup_migrate_execute+0x1023/0x1d20 kernel/cgroup/cgroup.c:2515 cgroup_migrate kernel/cgroup/cgroup.c:2771 [inline] cgroup_attach_task+0x540/0x8b0 kernel/cgroup/cgroup.c:2804 __cgroup1_procs_write+0x5cc/0x7a0 kernel/cgroup/cgroup-v1.c:520 cgroup1_tasks_write+0x94/0xb0 kernel/cgroup/cgroup-v1.c:539 cgroup_file_write+0x4c2/0x9e0 kernel/cgroup/cgroup.c:3852 kernfs_fop_write_iter+0x66a/0x9f0 fs/kernfs/file.c:296 call_write_iter include/linux/fs.h:2162 [inline] new_sync_write fs/read_write.c:503 [inline] vfs_write+0x1318/0x2030 fs/read_write.c:590 ksys_write+0x28b/0x510 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0xdb/0x120 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_post_alloc_hook mm/slab.h:524 [inline] slab_alloc_node mm/slub.c:3251 [inline] slab_alloc mm/slub.c:3259 [inline] kmem_cache_alloc+0x902/0x11c0 mm/slub.c:3264 mpol_new mm/mempolicy.c:293 [inline] do_set_mempolicy+0x421/0xb70 mm/mempolicy.c:853 kernel_set_mempolicy mm/mempolicy.c:1504 [inline] __do_sys_set_mempolicy mm/mempolicy.c:1510 [inline] __se_sys_set_mempolicy+0x44c/0xb60 mm/mempolicy.c:1507 __x64_sys_set_mempolicy+0xd8/0x110 mm/mempolicy.c:1507 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae KMSAN: uninit-value in mpol_rebind_task (2) https://syzkaller.appspot.com/bug?id=d6eb90f952c2a5de9ea718a1b873c55cb13b59dc This patch seems to fix below bug too. KMSAN: uninit-value in mpol_rebind_mm (2) https://syzkaller.appspot.com/bug?id=f2fecd0d7013f54ec4162f60743a2b28df40926b The uninit-value is pol->w.cpuset_mems_allowed in mpol_rebind_policy(). When syzkaller reproducer runs to the beginning of mpol_new(), mpol_new() mm/mempolicy.c do_mbind() mm/mempolicy.c kernel_mbind() mm/mempolicy.c `mode` is 1(MPOL_PREFERRED), nodes_empty(*nodes) is `true` and `flags` is 0. Then mode = MPOL_LOCAL; ... policy->mode = mode; policy->flags = flags; will be executed. So in mpol_set_nodemask(), mpol_set_nodemask() mm/mempolicy.c do_mbind() kernel_mbind() pol->mode is 4 (MPOL_LOCAL), that `nodemask` in `pol` is not initialized, which will be accessed in mpol_rebind_policy().

In the Linux kernel, the following vulnerability has been resolved: ath11k: fix missing skb drop on htc_tx_completion error On htc_tx_completion error the skb is not dropped. This is wrong since the completion_handler logic expect the skb to be consumed anyway even when an error is triggered. Not freeing the skb on error is a memory leak since the skb won't be freed anywere else. Correctly free the packet on eid >= ATH11K_HTC_EP_COUNT before returning. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: bpf: Add BPF_PROG_TYPE_CGROUP_SKB attach type enforcement in BPF_LINK_CREATE bpf_prog_attach uses attach_type_to_prog_type to enforce proper attach type for BPF_PROG_TYPE_CGROUP_SKB. link_create uses bpf_prog_get and relies on bpf_prog_attach_check_attach_type to properly verify prog_type <> attach_type association. Add missing attach_type enforcement for the link_create case. Otherwise, it's currently possible to attach cgroup_skb prog types to other cgroup hooks.

In the Linux kernel, the following vulnerability has been resolved: ext4: avoid resizing to a partial cluster size This patch avoids an attempt to resize the filesystem to an unaligned cluster boundary. An online resize to a size that is not integral to cluster size results in the last iteration attempting to grow the fs by a negative amount, which trips a BUG_ON and leaves the fs with a corrupted in-memory superblock.

In the Linux kernel, the following vulnerability has been resolved: ASoC: ti: j721e-evm: Fix refcount leak in j721e_soc_probe_* of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not needed anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: move the EST lock to struct stmmac_priv Reinitialize the whole EST structure would also reset the mutex lock which is embedded in the EST structure, and then trigger the following warning. To address this, move the lock to struct stmmac_priv. We also need to reacquire the mutex lock when doing this initialization. DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 3 PID: 505 at kernel/locking/mutex.c:587 __mutex_lock+0xd84/0x1068 Modules linked in: CPU: 3 PID: 505 Comm: tc Not tainted 6.9.0-rc6-00053-g0106679839f7-dirty #29 Hardware name: NXP i.MX8MPlus EVK board (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __mutex_lock+0xd84/0x1068 lr : __mutex_lock+0xd84/0x1068 sp : ffffffc0864e3570 x29: ffffffc0864e3570 x28: ffffffc0817bdc78 x27: 0000000000000003 x26: ffffff80c54f1808 x25: ffffff80c9164080 x24: ffffffc080d723ac x23: 0000000000000000 x22: 0000000000000002 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffc083bc3000 x18: ffffffffffffffff x17: ffffffc08117b080 x16: 0000000000000002 x15: ffffff80d2d40000 x14: 00000000000002da x13: ffffff80d2d404b8 x12: ffffffc082b5a5c8 x11: ffffffc082bca680 x10: ffffffc082bb2640 x9 : ffffffc082bb2698 x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000000001 x5 : ffffff8178fe0d48 x4 : 0000000000000000 x3 : 0000000000000027 x2 : ffffff8178fe0d50 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: __mutex_lock+0xd84/0x1068 mutex_lock_nested+0x28/0x34 tc_setup_taprio+0x118/0x68c stmmac_setup_tc+0x50/0xf0 taprio_change+0x868/0xc9c

An issue was discovered in the FUSE filesystem implementation in the Linux kernel before 5.10.6, aka CID-5d069dbe8aaf. fuse_do_getattr() calls make_bad_inode() in inappropriate situations, causing a system crash. NOTE: the original fix for this vulnerability was incomplete, and its incompleteness is tracked as CVE-2021-28950.

In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix duplicated reported IW_CM_EVENT_CONNECT_REPLY event If siw_recv_mpa_rr returns -EAGAIN, it means that the MPA reply hasn't been received completely, and should not report IW_CM_EVENT_CONNECT_REPLY in this case. This may trigger a call trace in iw_cm. A simple way to trigger this: server: ib_send_lat client: ib_send_lat -R <server_ip> The call trace looks like this: kernel BUG at drivers/infiniband/core/iwcm.c:894! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI <...> Workqueue: iw_cm_wq cm_work_handler [iw_cm] Call Trace: <TASK> cm_work_handler+0x1dd/0x370 [iw_cm] process_one_work+0x1e2/0x3b0 worker_thread+0x49/0x2e0 ? rescuer_thread+0x370/0x370 kthread+0xe5/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: nfs4: Fix kmemleak when allocate slot failed If one of the slot allocate failed, should cleanup all the other allocated slots, otherwise, the allocated slots will leak: unreferenced object 0xffff8881115aa100 (size 64): comm ""mount.nfs"", pid 679, jiffies 4294744957 (age 115.037s) hex dump (first 32 bytes): 00 cc 19 73 81 88 ff ff 00 a0 5a 11 81 88 ff ff ...s......Z..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000007a4c434a>] nfs4_find_or_create_slot+0x8e/0x130 [<000000005472a39c>] nfs4_realloc_slot_table+0x23f/0x270 [<00000000cd8ca0eb>] nfs40_init_client+0x4a/0x90 [<00000000128486db>] nfs4_init_client+0xce/0x270 [<000000008d2cacad>] nfs4_set_client+0x1a2/0x2b0 [<000000000e593b52>] nfs4_create_server+0x300/0x5f0 [<00000000e4425dd2>] nfs4_try_get_tree+0x65/0x110 [<00000000d3a6176f>] vfs_get_tree+0x41/0xf0 [<0000000016b5ad4c>] path_mount+0x9b3/0xdd0 [<00000000494cae71>] __x64_sys_mount+0x190/0x1d0 [<000000005d56bdec>] do_syscall_64+0x35/0x80 [<00000000687c9ae4>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

In the Linux kernel, the following vulnerability has been resolved: media: dvbdev: Fix memory leak in dvb_media_device_free() dvb_media_device_free() is leaking memory. Free `dvbdev->adapter->conn` before setting it to NULL, as documented in include/media/media-device.h: "The media_entity instance itself must be freed explicitly by the driver if required."

In the Linux kernel, the following vulnerability has been resolved: net/smc: Fix possible leaked pernet namespace in smc_init() In smc_init(), register_pernet_subsys(&smc_net_stat_ops) is called without any error handling. If it fails, registering of &smc_net_ops won't be reverted. And if smc_nl_init() fails, &smc_net_stat_ops itself won't be reverted. This leaves wild ops in subsystem linkedlist and when another module tries to call register_pernet_operations() it triggers page fault: BUG: unable to handle page fault for address: fffffbfff81b964c RIP: 0010:register_pernet_operations+0x1b9/0x5f0 Call Trace: <TASK> register_pernet_subsys+0x29/0x40 ebtables_init+0x58/0x1000 [ebtables] ...

In the Linux kernel, the following vulnerability has been resolved: i2c: img-scb: fix reference leak when pm_runtime_get_sync fails The PM reference count is not expected to be incremented on return in functions img_i2c_xfer and img_i2c_init. However, pm_runtime_get_sync will increment the PM reference count even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced.

In the Linux kernel, the following vulnerability has been resolved: remoteproc: k3-r5: Fix refcount leak in k3_r5_cluster_of_init Every iteration of for_each_available_child_of_node() decrements the reference count of the previous node. When breaking early from a for_each_available_child_of_node() loop, we need to explicitly call of_node_put() on the child node. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: mtd: maps: pxa2xx-flash: fix memory leak in probe Free 'info' upon remapping error to avoid a memory leak. [<miquel.raynal@bootlin.com>: Reword the commit log]

In the Linux kernel, the following vulnerability has been resolved: gpio: gpio-xilinx: Fix integer overflow Current implementation is not able to configure more than 32 pins due to incorrect data type. So type casting with unsigned long to avoid it.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: qcom: bam_dma: fix runtime PM underflow Commit dbad41e7bb5f ("dmaengine: qcom: bam_dma: check if the runtime pm enabled") caused unbalanced pm_runtime_get/put() calls when the bam is controlled remotely. This commit reverts it and just enables pm_runtime in all cases, the clk_* functions already just nop when the clock is NULL. Also clean up a bit by removing unnecessary bamclk null checks.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/mdp4: Fix refcount leak in mdp4_modeset_init_intf of_graph_get_remote_node() returns remote device node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Patchwork: https://patchwork.freedesktop.org/patch/488473/

In the Linux kernel, the following vulnerability has been resolved: net: fec: remove .ndo_poll_controller to avoid deadlocks There is a deadlock issue found in sungem driver, please refer to the commit ac0a230f719b ("eth: sungem: remove .ndo_poll_controller to avoid deadlocks"). The root cause of the issue is that netpoll is in atomic context and disable_irq() is called by .ndo_poll_controller interface of sungem driver, however, disable_irq() might sleep. After analyzing the implementation of fec_poll_controller(), the fec driver should have the same issue. Due to the fec driver uses NAPI for TX completions, the .ndo_poll_controller is unnecessary to be implemented in the fec driver, so fec_poll_controller() can be safely removed.

In the Linux kernel, the following vulnerability has been resolved: md/raid5: fix deadlock that raid5d() wait for itself to clear MD_SB_CHANGE_PENDING Xiao reported that lvm2 test lvconvert-raid-takeover.sh can hang with small possibility, the root cause is exactly the same as commit bed9e27baf52 ("Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"") However, Dan reported another hang after that, and junxiao investigated the problem and found out that this is caused by plugged bio can't issue from raid5d(). Current implementation in raid5d() has a weird dependence: 1) md_check_recovery() from raid5d() must hold 'reconfig_mutex' to clear MD_SB_CHANGE_PENDING; 2) raid5d() handles IO in a deadloop, until all IO are issued; 3) IO from raid5d() must wait for MD_SB_CHANGE_PENDING to be cleared; This behaviour is introduce before v2.6, and for consequence, if other context hold 'reconfig_mutex', and md_check_recovery() can't update super_block, then raid5d() will waste one cpu 100% by the deadloop, until 'reconfig_mutex' is released. Refer to the implementation from raid1 and raid10, fix this problem by skipping issue IO if MD_SB_CHANGE_PENDING is still set after md_check_recovery(), daemon thread will be woken up when 'reconfig_mutex' is released. Meanwhile, the hang problem will be fixed as well.

In the Linux kernel, the following vulnerability has been resolved: powerpc/rtas: Keep MSR[RI] set when calling RTAS RTAS runs in real mode (MSR[DR] and MSR[IR] unset) and in 32-bit big endian mode (MSR[SF,LE] unset). The change in MSR is done in enter_rtas() in a relatively complex way, since the MSR value could be hardcoded. Furthermore, a panic has been reported when hitting the watchdog interrupt while running in RTAS, this leads to the following stack trace: watchdog: CPU 24 Hard LOCKUP watchdog: CPU 24 TB:997512652051031, last heartbeat TB:997504470175378 (15980ms ago) ... Supported: No, Unreleased kernel CPU: 24 PID: 87504 Comm: drmgr Kdump: loaded Tainted: G E X 5.14.21-150400.71.1.bz196362_2-default #1 SLE15-SP4 (unreleased) 0d821077ef4faa8dfaf370efb5fdca1fa35f4e2c NIP: 000000001fb41050 LR: 000000001fb4104c CTR: 0000000000000000 REGS: c00000000fc33d60 TRAP: 0100 Tainted: G E X (5.14.21-150400.71.1.bz196362_2-default) MSR: 8000000002981000 <SF,VEC,VSX,ME> CR: 48800002 XER: 20040020 CFAR: 000000000000011c IRQMASK: 1 GPR00: 0000000000000003 ffffffffffffffff 0000000000000001 00000000000050dc GPR04: 000000001ffb6100 0000000000000020 0000000000000001 000000001fb09010 GPR08: 0000000020000000 0000000000000000 0000000000000000 0000000000000000 GPR12: 80040000072a40a8 c00000000ff8b680 0000000000000007 0000000000000034 GPR16: 000000001fbf6e94 000000001fbf6d84 000000001fbd1db0 000000001fb3f008 GPR20: 000000001fb41018 ffffffffffffffff 000000000000017f fffffffffffff68f GPR24: 000000001fb18fe8 000000001fb3e000 000000001fb1adc0 000000001fb1cf40 GPR28: 000000001fb26000 000000001fb460f0 000000001fb17f18 000000001fb17000 NIP [000000001fb41050] 0x1fb41050 LR [000000001fb4104c] 0x1fb4104c Call Trace: Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX Oops: Unrecoverable System Reset, sig: 6 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries ... Supported: No, Unreleased kernel CPU: 24 PID: 87504 Comm: drmgr Kdump: loaded Tainted: G E X 5.14.21-150400.71.1.bz196362_2-default #1 SLE15-SP4 (unreleased) 0d821077ef4faa8dfaf370efb5fdca1fa35f4e2c NIP: 000000001fb41050 LR: 000000001fb4104c CTR: 0000000000000000 REGS: c00000000fc33d60 TRAP: 0100 Tainted: G E X (5.14.21-150400.71.1.bz196362_2-default) MSR: 8000000002981000 <SF,VEC,VSX,ME> CR: 48800002 XER: 20040020 CFAR: 000000000000011c IRQMASK: 1 GPR00: 0000000000000003 ffffffffffffffff 0000000000000001 00000000000050dc GPR04: 000000001ffb6100 0000000000000020 0000000000000001 000000001fb09010 GPR08: 0000000020000000 0000000000000000 0000000000000000 0000000000000000 GPR12: 80040000072a40a8 c00000000ff8b680 0000000000000007 0000000000000034 GPR16: 000000001fbf6e94 000000001fbf6d84 000000001fbd1db0 000000001fb3f008 GPR20: 000000001fb41018 ffffffffffffffff 000000000000017f fffffffffffff68f GPR24: 000000001fb18fe8 000000001fb3e000 000000001fb1adc0 000000001fb1cf40 GPR28: 000000001fb26000 000000001fb460f0 000000001fb17f18 000000001fb17000 NIP [000000001fb41050] 0x1fb41050 LR [000000001fb4104c] 0x1fb4104c Call Trace: Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace 3ddec07f638c34a2 ]--- This happens because MSR[RI] is unset when entering RTAS but there is no valid reason to not set it here. RTAS is expected to be called with MSR[RI] as specified in PAPR+ section "7.2.1 Machine State": R1–7.2.1–9. If called with MSR[RI] equal to 1, then RTAS must protect its own critical regions from recursion by setting the MSR[RI] bit to 0 when in the critical regions. Fixing this by reviewing the way MSR is compute before calling RTAS. Now a hardcoded value meaning real ---truncated---

In the Linux kernel, the following vulnerability has been resolved: x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave) Set the starting uABI size of KVM's guest FPU to 'struct kvm_xsave', i.e. to KVM's historical uABI size. When saving FPU state for usersapce, KVM (well, now the FPU) sets the FP+SSE bits in the XSAVE header even if the host doesn't support XSAVE. Setting the XSAVE header allows the VM to be migrated to a host that does support XSAVE without the new host having to handle FPU state that may or may not be compatible with XSAVE. Setting the uABI size to the host's default size results in out-of-bounds writes (setting the FP+SSE bits) and data corruption (that is thankfully caught by KASAN) when running on hosts without XSAVE, e.g. on Core2 CPUs. WARN if the default size is larger than KVM's historical uABI size; all features that can push the FPU size beyond the historical size must be opt-in. ================================================================== BUG: KASAN: slab-out-of-bounds in fpu_copy_uabi_to_guest_fpstate+0x86/0x130 Read of size 8 at addr ffff888011e33a00 by task qemu-build/681 CPU: 1 PID: 681 Comm: qemu-build Not tainted 5.18.0-rc5-KASAN-amd64 #1 Hardware name: /DG35EC, BIOS ECG3510M.86A.0118.2010.0113.1426 01/13/2010 Call Trace: <TASK> dump_stack_lvl+0x34/0x45 print_report.cold+0x45/0x575 kasan_report+0x9b/0xd0 fpu_copy_uabi_to_guest_fpstate+0x86/0x130 kvm_arch_vcpu_ioctl+0x72a/0x1c50 [kvm] kvm_vcpu_ioctl+0x47f/0x7b0 [kvm] __x64_sys_ioctl+0x5de/0xc90 do_syscall_64+0x31/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> Allocated by task 0: (stack is not available) The buggy address belongs to the object at ffff888011e33800 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 0 bytes to the right of 512-byte region [ffff888011e33800, ffff888011e33a00) The buggy address belongs to the physical page: page:0000000089cd4adb refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11e30 head:0000000089cd4adb order:2 compound_mapcount:0 compound_pincount:0 flags: 0x4000000000010200(slab|head|zone=1) raw: 4000000000010200 dead000000000100 dead000000000122 ffff888001041c80 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888011e33900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888011e33980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888011e33a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff888011e33a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888011e33b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Disabling lock debugging due to kernel taint

In the Linux kernel, the following vulnerability has been resolved: crypto: hisilicon/sec - don't sleep when in softirq When kunpeng920 encryption driver is used to deencrypt and decrypt packets during the softirq, it is not allowed to use mutex lock. The kernel will report the following error: BUG: scheduling while atomic: swapper/57/0/0x00000300 Call trace: dump_backtrace+0x0/0x1e4 show_stack+0x20/0x2c dump_stack+0xd8/0x140 __schedule_bug+0x68/0x80 __schedule+0x728/0x840 schedule+0x50/0xe0 schedule_preempt_disabled+0x18/0x24 __mutex_lock.constprop.0+0x594/0x5dc __mutex_lock_slowpath+0x1c/0x30 mutex_lock+0x50/0x60 sec_request_init+0x8c/0x1a0 [hisi_sec2] sec_process+0x28/0x1ac [hisi_sec2] sec_skcipher_crypto+0xf4/0x1d4 [hisi_sec2] sec_skcipher_encrypt+0x1c/0x30 [hisi_sec2] crypto_skcipher_encrypt+0x2c/0x40 crypto_authenc_encrypt+0xc8/0xfc [authenc] crypto_aead_encrypt+0x2c/0x40 echainiv_encrypt+0x144/0x1a0 [echainiv] crypto_aead_encrypt+0x2c/0x40 esp_output_tail+0x348/0x5c0 [esp4] esp_output+0x120/0x19c [esp4] xfrm_output_one+0x25c/0x4d4 xfrm_output_resume+0x6c/0x1fc xfrm_output+0xac/0x3c0 xfrm4_output+0x64/0x130 ip_build_and_send_pkt+0x158/0x20c tcp_v4_send_synack+0xdc/0x1f0 tcp_conn_request+0x7d0/0x994 tcp_v4_conn_request+0x58/0x6c tcp_v6_conn_request+0xf0/0x100 tcp_rcv_state_process+0x1cc/0xd60 tcp_v4_do_rcv+0x10c/0x250 tcp_v4_rcv+0xfc4/0x10a4 ip_protocol_deliver_rcu+0xf4/0x200 ip_local_deliver_finish+0x58/0x70 ip_local_deliver+0x68/0x120 ip_sublist_rcv_finish+0x70/0x94 ip_list_rcv_finish.constprop.0+0x17c/0x1d0 ip_sublist_rcv+0x40/0xb0 ip_list_rcv+0x140/0x1dc __netif_receive_skb_list_core+0x154/0x28c __netif_receive_skb_list+0x120/0x1a0 netif_receive_skb_list_internal+0xe4/0x1f0 napi_complete_done+0x70/0x1f0 gro_cell_poll+0x9c/0xb0 napi_poll+0xcc/0x264 net_rx_action+0xd4/0x21c __do_softirq+0x130/0x358 irq_exit+0x11c/0x13c __handle_domain_irq+0x88/0xf0 gic_handle_irq+0x78/0x2c0 el1_irq+0xb8/0x140 arch_cpu_idle+0x18/0x40 default_idle_call+0x5c/0x1c0 cpuidle_idle_call+0x174/0x1b0 do_idle+0xc8/0x160 cpu_startup_entry+0x30/0x11c secondary_start_kernel+0x158/0x1e4 softirq: huh, entered softirq 3 NET_RX 0000000093774ee4 with preempt_count 00000100, exited with fffffe00?

In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/cpufreq_cooling: Fix slab OOB issue Slab OOB issue is scanned by KASAN in cpu_power_to_freq(). If power is limited below the power of OPP0 in EM table, it will cause slab out-of-bound issue with negative array index. Return the lowest frequency if limited power cannot found a suitable OPP in EM table to fix this issue. Backtrace: [<ffffffd02d2a37f0>] die+0x104/0x5ac [<ffffffd02d2a5630>] bug_handler+0x64/0xd0 [<ffffffd02d288ce4>] brk_handler+0x160/0x258 [<ffffffd02d281e5c>] do_debug_exception+0x248/0x3f0 [<ffffffd02d284488>] el1_dbg+0x14/0xbc [<ffffffd02d75d1d4>] __kasan_report+0x1dc/0x1e0 [<ffffffd02d75c2e0>] kasan_report+0x10/0x20 [<ffffffd02d75def8>] __asan_report_load8_noabort+0x18/0x28 [<ffffffd02e6fce5c>] cpufreq_power2state+0x180/0x43c [<ffffffd02e6ead80>] power_actor_set_power+0x114/0x1d4 [<ffffffd02e6fac24>] allocate_power+0xaec/0xde0 [<ffffffd02e6f9f80>] power_allocator_throttle+0x3ec/0x5a4 [<ffffffd02e6ea888>] handle_thermal_trip+0x160/0x294 [<ffffffd02e6edd08>] thermal_zone_device_check+0xe4/0x154 [<ffffffd02d351cb4>] process_one_work+0x5e4/0xe28 [<ffffffd02d352f44>] worker_thread+0xa4c/0xfac [<ffffffd02d360124>] kthread+0x33c/0x358 [<ffffffd02d289940>] ret_from_fork+0xc/0x18

In the Linux kernel, the following vulnerability has been resolved: loop: Check for overflow while configuring loop The userspace can configure a loop using an ioctl call, wherein a configuration of type loop_config is passed (see lo_ioctl()'s case on line 1550 of drivers/block/loop.c). This proceeds to call loop_configure() which in turn calls loop_set_status_from_info() (see line 1050 of loop.c), passing &config->info which is of type loop_info64*. This function then sets the appropriate values, like the offset. loop_device has lo_offset of type loff_t (see line 52 of loop.c), which is typdef-chained to long long, whereas loop_info64 has lo_offset of type __u64 (see line 56 of include/uapi/linux/loop.h). The function directly copies offset from info to the device as follows (See line 980 of loop.c): lo->lo_offset = info->lo_offset; This results in an overflow, which triggers a warning in iomap_iter() due to a call to iomap_iter_done() which has: WARN_ON_ONCE(iter->iomap.offset > iter->pos); Thus, check for negative value during loop_set_status_from_info(). Bug report: https://syzkaller.appspot.com/bug?id=c620fe14aac810396d3c3edc9ad73848bf69a29e

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid use f2fs_bug_on() in f2fs_new_node_page() As Dipanjan Das <mail.dipanjan.das@gmail.com> reported, syzkaller found a f2fs bug as below: RIP: 0010:f2fs_new_node_page+0x19ac/0x1fc0 fs/f2fs/node.c:1295 Call Trace: write_all_xattrs fs/f2fs/xattr.c:487 [inline] __f2fs_setxattr+0xe76/0x2e10 fs/f2fs/xattr.c:743 f2fs_setxattr+0x233/0xab0 fs/f2fs/xattr.c:790 f2fs_xattr_generic_set+0x133/0x170 fs/f2fs/xattr.c:86 __vfs_setxattr+0x115/0x180 fs/xattr.c:182 __vfs_setxattr_noperm+0x125/0x5f0 fs/xattr.c:216 __vfs_setxattr_locked+0x1cf/0x260 fs/xattr.c:277 vfs_setxattr+0x13f/0x330 fs/xattr.c:303 setxattr+0x146/0x160 fs/xattr.c:611 path_setxattr+0x1a7/0x1d0 fs/xattr.c:630 __do_sys_lsetxattr fs/xattr.c:653 [inline] __se_sys_lsetxattr fs/xattr.c:649 [inline] __x64_sys_lsetxattr+0xbd/0x150 fs/xattr.c:649 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 NAT entry and nat bitmap can be inconsistent, e.g. one nid is free in nat bitmap, and blkaddr in its NAT entry is not NULL_ADDR, it may trigger BUG_ON() in f2fs_new_node_page(), fix it.

In the Linux kernel, the following vulnerability has been resolved: tick/nohz: unexport __init-annotated tick_nohz_full_setup() EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it had been broken for a decade. Commit 28438794aba4 ("modpost: fix section mismatch check for exported init/exit sections") fixed it so modpost started to warn it again, then this showed up: MODPOST vmlinux.symvers WARNING: modpost: vmlinux.o(___ksymtab_gpl+tick_nohz_full_setup+0x0): Section mismatch in reference from the variable __ksymtab_tick_nohz_full_setup to the function .init.text:tick_nohz_full_setup() The symbol tick_nohz_full_setup is exported and annotated __init Fix this by removing the __init annotation of tick_nohz_full_setup or drop the export. Drop the export because tick_nohz_full_setup() is only called from the built-in code in kernel/sched/isolation.c.

In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: do not call vma_add_reservation upon ENOMEM sysbot reported a splat [1] on __unmap_hugepage_range(). This is because vma_needs_reservation() can return -ENOMEM if allocate_file_region_entries() fails to allocate the file_region struct for the reservation. Check for that and do not call vma_add_reservation() if that is the case, otherwise region_abort() and region_del() will see that we do not have any file_regions. If we detect that vma_needs_reservation() returned -ENOMEM, we clear the hugetlb_restore_reserve flag as if this reservation was still consumed, so free_huge_folio() will not increment the resv count. [1] https://lore.kernel.org/linux-mm/0000000000004096100617c58d54@google.com/T/#ma5983bc1ab18a54910da83416b3f89f3c7ee43aa

In the Linux kernel, the following vulnerability has been resolved: powerpc/iommu: Add missing of_node_put in iommu_init_early_dart The device_node pointer is returned by of_find_compatible_node with refcount incremented. We should use of_node_put() to avoid the refcount leak.

In the Linux kernel, the following vulnerability has been resolved: zram: free secondary algorithms names We need to kfree() secondary algorithms names when reset zram device that had multi-streams, otherwise we leak memory. [senozhatsky@chromium.org: kfree(NULL) is legal]

In the Linux kernel, the following vulnerability has been resolved: cpufreq: zynq: Fix refcount leak in zynq_get_revision of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: vfio/pci: fix potential memory leak in vfio_intx_enable() If vfio_irq_ctx_alloc() failed will lead to 'name' memory leak.

In the Linux kernel, the following vulnerability has been resolved: ALSA: timer: Set lower bound of start tick time Currently ALSA timer doesn't have the lower limit of the start tick time, and it allows a very small size, e.g. 1 tick with 1ns resolution for hrtimer. Such a situation may lead to an unexpected RCU stall, where the callback repeatedly queuing the expire update, as reported by fuzzer. This patch introduces a sanity check of the timer start tick time, so that the system returns an error when a too small start size is set. As of this patch, the lower limit is hard-coded to 100us, which is small enough but can still work somehow.

In the Linux kernel, the following vulnerability has been resolved: Input: sparcspkr - fix refcount leak in bbc_beep_probe of_find_node_by_path() calls of_find_node_opts_by_path(), which returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: arm64: set UXN on swapper page tables [ This issue was fixed upstream by accident in c3cee924bd85 ("arm64: head: cover entire kernel image in initial ID map") as part of a large refactoring of the arm64 boot flow. This simple fix is therefore preferred for -stable backporting ] On a system that implements FEAT_EPAN, read/write access to the idmap is denied because UXN is not set on the swapper PTEs. As a result, idmap_kpti_install_ng_mappings panics the kernel when accessing __idmap_kpti_flag. Fix it by setting UXN on these PTEs.

In the Linux kernel, the following vulnerability has been resolved: coresight: trbe: remove cpuhp instance node before remove cpuhp state cpuhp_state_add_instance() and cpuhp_state_remove_instance() should be used in pairs. Or there will lead to the warn on cpuhp_remove_multi_state() since the cpuhp_step list is not empty. The following is the error log with 'rmmod coresight-trbe': Error: Removing state 215 which has instances left. Call trace: __cpuhp_remove_state_cpuslocked+0x144/0x160 __cpuhp_remove_state+0xac/0x100 arm_trbe_device_remove+0x2c/0x60 [coresight_trbe] platform_remove+0x34/0x70 device_remove+0x54/0x90 device_release_driver_internal+0x1e4/0x250 driver_detach+0x5c/0xb0 bus_remove_driver+0x64/0xc0 driver_unregister+0x3c/0x70 platform_driver_unregister+0x20/0x30 arm_trbe_exit+0x1c/0x658 [coresight_trbe] __arm64_sys_delete_module+0x1ac/0x24c invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x58/0x1a0 do_el0_svc+0x38/0xd0 el0_svc+0x2c/0xc0 el0t_64_sync_handler+0x1ac/0x1b0 el0t_64_sync+0x19c/0x1a0 ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix call trace in setup_tx_descriptors After PF reset and ethtool -t there was call trace in dmesg sometimes leading to panic. When there was some time, around 5 seconds, between reset and test there were no errors. Problem was that pf reset calls i40e_vsi_close in prep_for_reset and ethtool -t calls i40e_vsi_close in diag_test. If there was not enough time between those commands the second i40e_vsi_close starts before previous i40e_vsi_close was done which leads to crash. Add check to diag_test if pf is in reset and don't start offline tests if it is true. Add netif_info("testing failed") into unhappy path of i40e_diag_test()