In the Linux kernel, the following vulnerability has been resolved: padata: Fix pd UAF once and for all There is a race condition/UAF in padata_reorder that goes back to the initial commit. A reference count is taken at the start of the process in padata_do_parallel, and released at the end in padata_serial_worker. This reference count is (and only is) required for padata_replace to function correctly. If padata_replace is never called then there is no issue. In the function padata_reorder which serves as the core of padata, as soon as padata is added to queue->serial.list, and the associated spin lock released, that padata may be processed and the reference count on pd would go away. Fix this by getting the next padata before the squeue->serial lock is released. In order to make this possible, simplify padata_reorder by only calling it once the next padata arrives.

In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: Fix use-after-free bugs in otx2_sync_tstamp() The original code relies on cancel_delayed_work() in otx2_ptp_destroy(), which does not ensure that the delayed work item synctstamp_work has fully completed if it was already running. This leads to use-after-free scenarios where otx2_ptp is deallocated by otx2_ptp_destroy(), while synctstamp_work remains active and attempts to dereference otx2_ptp in otx2_sync_tstamp(). Furthermore, the synctstamp_work is cyclic, the likelihood of triggering the bug is nonnegligible. A typical race condition is illustrated below: CPU 0 (cleanup) | CPU 1 (delayed work callback) otx2_remove() | otx2_ptp_destroy() | otx2_sync_tstamp() cancel_delayed_work() | kfree(ptp) | | ptp = container_of(...); //UAF | ptp-> //UAF This is confirmed by a KASAN report: BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0 Write of size 8 at addr ffff88800aa09a18 by task bash/136 ... Call Trace: <IRQ> dump_stack_lvl+0x55/0x70 print_report+0xcf/0x610 ? __run_timer_base.part.0+0x7d7/0x8c0 kasan_report+0xb8/0xf0 ? __run_timer_base.part.0+0x7d7/0x8c0 __run_timer_base.part.0+0x7d7/0x8c0 ? __pfx___run_timer_base.part.0+0x10/0x10 ? __pfx_read_tsc+0x10/0x10 ? ktime_get+0x60/0x140 ? lapic_next_event+0x11/0x20 ? clockevents_program_event+0x1d4/0x2a0 run_timer_softirq+0xd1/0x190 handle_softirqs+0x16a/0x550 irq_exit_rcu+0xaf/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 </IRQ> ... Allocated by task 1: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7f/0x90 otx2_ptp_init+0xb1/0x860 otx2_probe+0x4eb/0xc30 local_pci_probe+0xdc/0x190 pci_device_probe+0x2fe/0x470 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __driver_attach+0xd2/0x310 bus_for_each_dev+0xed/0x170 bus_add_driver+0x208/0x500 driver_register+0x132/0x460 do_one_initcall+0x89/0x300 kernel_init_freeable+0x40d/0x720 kernel_init+0x1a/0x150 ret_from_fork+0x10c/0x1a0 ret_from_fork_asm+0x1a/0x30 Freed by task 136: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3a/0x60 __kasan_slab_free+0x3f/0x50 kfree+0x137/0x370 otx2_ptp_destroy+0x38/0x80 otx2_remove+0x10d/0x4c0 pci_device_remove+0xa6/0x1d0 device_release_driver_internal+0xf8/0x210 pci_stop_bus_device+0x105/0x150 pci_stop_and_remove_bus_device_locked+0x15/0x30 remove_store+0xcc/0xe0 kernfs_fop_write_iter+0x2c3/0x440 vfs_write+0x871/0xd70 ksys_write+0xee/0x1c0 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the delayed work item is properly canceled before the otx2_ptp is deallocated. This bug was initially identified through static analysis. To reproduce and test it, I simulated the OcteonTX2 PCI device in QEMU and introduced artificial delays within the otx2_sync_tstamp() function to increase the likelihood of triggering the bug.

In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: fix potential OF node use-after-free The for_each_child_of_node() helper drops the reference it takes to each node as it iterates over children and an explicit of_node_put() is only needed when exiting the loop early. Drop the recently introduced bogus additional reference count decrement at each iteration that could potentially lead to a use-after-free.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: vhci: Prevent use-after-free by removing debugfs files early Move the creation of debugfs files into a dedicated function, and ensure they are explicitly removed during vhci_release(), before associated data structures are freed. Previously, debugfs files such as "force_suspend", "force_wakeup", and others were created under hdev->debugfs but not removed in vhci_release(). Since vhci_release() frees the backing vhci_data structure, any access to these files after release would result in use-after-free errors. Although hdev->debugfs is later freed in hci_release_dev(), user can access files after vhci_data is freed but before hdev->debugfs is released.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Make dma-fences compliant with the safe access rules Xe can free some of the data pointed to by the dma-fences it exports. Most notably the timeline name can get freed if userspace closes the associated submit queue. At the same time the fence could have been exported to a third party (for example a sync_fence fd) which will then cause an use- after-free on subsequent access. To make this safe we need to make the driver compliant with the newly documented dma-fence rules. Driver has to ensure a RCU grace period between signalling a fence and freeing any data pointed to by said fence. For the timeline name we simply make the queue be freed via kfree_rcu and for the shared lock associated with multiple queues we add a RCU grace period before freeing the per GT structure holding the lock.

In the Linux kernel, the following vulnerability has been resolved: net: airoha: fix potential use-after-free in airoha_npu_get() np->name was being used after calling of_node_put(np), which releases the node and can lead to a use-after-free bug. Previously, of_node_put(np) was called unconditionally after of_find_device_by_node(np), which could result in a use-after-free if pdev is NULL. This patch moves of_node_put(np) after the error check to ensure the node is only released after both the error and success cases are handled appropriately, preventing potential resource issues.

In the Linux kernel, the following vulnerability has been resolved: habanalabs: fix UAF in export_dmabuf() As soon as we'd inserted a file reference into descriptor table, another thread could close it. That's fine for the case when all we are doing is returning that descriptor to userland (it's a race, but it's a userland race and there's nothing the kernel can do about it). However, if we follow fd_install() with any kind of access to objects that would be destroyed on close (be it the struct file itself or anything destroyed by its ->release()), we have a UAF. dma_buf_fd() is a combination of reserving a descriptor and fd_install(). habanalabs export_dmabuf() calls it and then proceeds to access the objects destroyed on close. In particular, it grabs an extra reference to another struct file that will be dropped as part of ->release() for ours; that "will be" is actually "might have already been". Fix that by reserving descriptor before anything else and do fd_install() only when everything had been set up. As a side benefit, we no longer have the failure exit with file already created, but reference to underlying file (as well as ->dmabuf_export_cnt, etc.) not grabbed yet; unlike dma_buf_fd(), fd_install() can't fail.

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: fix use-after-free in cmp_bss() Following bss_free() quirk introduced in commit 776b3580178f ("cfg80211: track hidden SSID networks properly"), adjust cfg80211_update_known_bss() to free the last beacon frame elements only if they're not shared via the corresponding 'hidden_beacon_bss' pointer.

In the Linux kernel, the following vulnerability has been resolved: xfrm: interface: fix use-after-free after changing collect_md xfrm interface collect_md property on xfrm interfaces can only be set on device creation, thus xfrmi_changelink() should fail when called on such interfaces. The check to enforce this was done only in the case where the xi was returned from xfrmi_locate() which doesn't look for the collect_md interface, and thus the validation was never reached. Calling changelink would thus errornously place the special interface xi in the xfrmi_net->xfrmi hash, but since it also exists in the xfrmi_net->collect_md_xfrmi pointer it would lead to a double free when the net namespace was taken down [1]. Change the check to use the xi from netdev_priv which is available earlier in the function to prevent changes in xfrm collect_md interfaces. [1] resulting oops: [ 8.516540] kernel BUG at net/core/dev.c:12029! [ 8.516552] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 8.516559] CPU: 0 UID: 0 PID: 12 Comm: kworker/u80:0 Not tainted 6.15.0-virtme #5 PREEMPT(voluntary) [ 8.516565] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 8.516569] Workqueue: netns cleanup_net [ 8.516579] RIP: 0010:unregister_netdevice_many_notify+0x101/0xab0 [ 8.516590] Code: 90 0f 0b 90 48 8b b0 78 01 00 00 48 8b 90 80 01 00 00 48 89 56 08 48 89 32 4c 89 80 78 01 00 00 48 89 b8 80 01 00 00 eb ac 90 <0f> 0b 48 8b 45 00 4c 8d a0 88 fe ff ff 48 39 c5 74 5c 41 80 bc 24 [ 8.516593] RSP: 0018:ffffa93b8006bd30 EFLAGS: 00010206 [ 8.516598] RAX: ffff98fe4226e000 RBX: ffffa93b8006bd58 RCX: ffffa93b8006bc60 [ 8.516601] RDX: 0000000000000004 RSI: 0000000000000000 RDI: dead000000000122 [ 8.516603] RBP: ffffa93b8006bdd8 R08: dead000000000100 R09: ffff98fe4133c100 [ 8.516605] R10: 0000000000000000 R11: 00000000000003d2 R12: ffffa93b8006be00 [ 8.516608] R13: ffffffff96c1a510 R14: ffffffff96c1a510 R15: ffffa93b8006be00 [ 8.516615] FS: 0000000000000000(0000) GS:ffff98fee73b7000(0000) knlGS:0000000000000000 [ 8.516619] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.516622] CR2: 00007fcd2abd0700 CR3: 000000003aa40000 CR4: 0000000000752ef0 [ 8.516625] PKRU: 55555554 [ 8.516627] Call Trace: [ 8.516632] <TASK> [ 8.516635] ? rtnl_is_locked+0x15/0x20 [ 8.516641] ? unregister_netdevice_queue+0x29/0xf0 [ 8.516650] ops_undo_list+0x1f2/0x220 [ 8.516659] cleanup_net+0x1ad/0x2e0 [ 8.516664] process_one_work+0x160/0x380 [ 8.516673] worker_thread+0x2aa/0x3c0 [ 8.516679] ? __pfx_worker_thread+0x10/0x10 [ 8.516686] kthread+0xfb/0x200 [ 8.516690] ? __pfx_kthread+0x10/0x10 [ 8.516693] ? __pfx_kthread+0x10/0x10 [ 8.516697] ret_from_fork+0x82/0xf0 [ 8.516705] ? __pfx_kthread+0x10/0x10 [ 8.516709] ret_from_fork_asm+0x1a/0x30 [ 8.516718] </TASK>

In the Linux kernel, the following vulnerability has been resolved: cnic: Fix use-after-free bugs in cnic_delete_task The original code uses cancel_delayed_work() in cnic_cm_stop_bnx2x_hw(), which does not guarantee that the delayed work item 'delete_task' has fully completed if it was already running. Additionally, the delayed work item is cyclic, the flush_workqueue() in cnic_cm_stop_bnx2x_hw() only blocks and waits for work items that were already queued to the workqueue prior to its invocation. Any work items submitted after flush_workqueue() is called are not included in the set of tasks that the flush operation awaits. This means that after the cyclic work items have finished executing, a delayed work item may still exist in the workqueue. This leads to use-after-free scenarios where the cnic_dev is deallocated by cnic_free_dev(), while delete_task remains active and attempt to dereference cnic_dev in cnic_delete_task(). A typical race condition is illustrated below: CPU 0 (cleanup) | CPU 1 (delayed work callback) cnic_netdev_event() | cnic_stop_hw() | cnic_delete_task() cnic_cm_stop_bnx2x_hw() | ... cancel_delayed_work() | /* the queue_delayed_work() flush_workqueue() | executes after flush_workqueue()*/ | queue_delayed_work() cnic_free_dev(dev)//free | cnic_delete_task() //new instance | dev = cp->dev; //use Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the cyclic delayed work item is properly canceled and that any ongoing execution of the work item completes before the cnic_dev is deallocated. Furthermore, since cancel_delayed_work_sync() uses __flush_work(work, true) to synchronously wait for any currently executing instance of the work item to finish, the flush_workqueue() becomes redundant and should be removed. This bug was identified through static analysis. To reproduce the issue and validate the fix, I simulated the cnic PCI device in QEMU and introduced intentional delays — such as inserting calls to ssleep() within the cnic_delete_task() function — to increase the likelihood of triggering the bug.

In the Linux kernel, the following vulnerability has been resolved: vsock: Do not allow binding to VMADDR_PORT_ANY It is possible for a vsock to autobind to VMADDR_PORT_ANY. This can cause a use-after-free when a connection is made to the bound socket. The socket returned by accept() also has port VMADDR_PORT_ANY but is not on the list of unbound sockets. Binding it will result in an extra refcount decrement similar to the one fixed in fcdd2242c023 (vsock: Keep the binding until socket destruction). Modify the check in __vsock_bind_connectible() to also prevent binding to VMADDR_PORT_ANY.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: Fix error code in iwl_op_mode_dvm_start() Preserve the error code if iwl_setup_deferred_work() fails. The current code returns ERR_PTR(0) (which is NULL) on this path. I believe the missing error code potentially leads to a use after free involving debugfs.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix use-after-free in l2cap_sock_cleanup_listen() syzbot reported the splat below without a repro. In the splat, a single thread calling bt_accept_dequeue() freed sk and touched it after that. The root cause would be the racy l2cap_sock_cleanup_listen() call added by the cited commit. bt_accept_dequeue() is called under lock_sock() except for l2cap_sock_release(). Two threads could see the same socket during the list iteration in bt_accept_dequeue(): CPU1 CPU2 (close()) ---- ---- sock_hold(sk) sock_hold(sk); lock_sock(sk) <-- block close() sock_put(sk) bt_accept_unlink(sk) sock_put(sk) <-- refcnt by bt_accept_enqueue() release_sock(sk) lock_sock(sk) sock_put(sk) bt_accept_unlink(sk) sock_put(sk) <-- last refcnt bt_accept_unlink(sk) <-- UAF Depending on the timing, the other thread could show up in the "Freed by task" part. Let's call l2cap_sock_cleanup_listen() under lock_sock() in l2cap_sock_release(). [0]: BUG: KASAN: slab-use-after-free in debug_spin_lock_before kernel/locking/spinlock_debug.c:86 [inline] BUG: KASAN: slab-use-after-free in do_raw_spin_lock+0x26f/0x2b0 kernel/locking/spinlock_debug.c:115 Read of size 4 at addr ffff88803b7eb1c4 by task syz.5.3276/16995 CPU: 3 UID: 0 PID: 16995 Comm: syz.5.3276 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcd/0x630 mm/kasan/report.c:482 kasan_report+0xe0/0x110 mm/kasan/report.c:595 debug_spin_lock_before kernel/locking/spinlock_debug.c:86 [inline] do_raw_spin_lock+0x26f/0x2b0 kernel/locking/spinlock_debug.c:115 spin_lock_bh include/linux/spinlock.h:356 [inline] release_sock+0x21/0x220 net/core/sock.c:3746 bt_accept_dequeue+0x505/0x600 net/bluetooth/af_bluetooth.c:312 l2cap_sock_cleanup_listen+0x5c/0x2a0 net/bluetooth/l2cap_sock.c:1451 l2cap_sock_release+0x5c/0x210 net/bluetooth/l2cap_sock.c:1425 __sock_release+0xb3/0x270 net/socket.c:649 sock_close+0x1c/0x30 net/socket.c:1439 __fput+0x3ff/0xb70 fs/file_table.c:468 task_work_run+0x14d/0x240 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xeb/0x110 kernel/entry/common.c:43 exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:175 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:210 [inline] do_syscall_64+0x3f6/0x4c0 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f2accf8ebe9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffdb6cb1378 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4 RAX: 0000000000000000 RBX: 00000000000426fb RCX: 00007f2accf8ebe9 RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003 RBP: 00007f2acd1b7da0 R08: 0000000000000001 R09: 00000012b6cb166f R10: 0000001b30e20000 R11: 0000000000000246 R12: 00007f2acd1b609c R13: 00007f2acd1b6090 R14: ffffffffffffffff R15: 00007ffdb6cb1490 </TASK> Allocated by task 5326: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:388 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:405 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4365 [inline] __kmalloc_nopro ---truncated---

In the Linux kernel, the following vulnerability has been resolved: media: ivsc: Fix crash at shutdown due to missing mei_cldev_disable() calls Both the ACE and CSI driver are missing a mei_cldev_disable() call in their remove() function. This causes the mei_cl client to stay part of the mei_device->file_list list even though its memory is freed by mei_cl_bus_dev_release() calling kfree(cldev->cl). This leads to a use-after-free when mei_vsc_remove() runs mei_stop() which first removes all mei bus devices calling mei_ace_remove() and mei_csi_remove() followed by mei_cl_bus_dev_release() and then calls mei_cl_all_disconnect() which walks over mei_device->file_list dereferecing the just freed cldev->cl. And mei_vsc_remove() it self is run at shutdown because of the platform_device_unregister(tp->pdev) in vsc_tp_shutdown() When building a kernel with KASAN this leads to the following KASAN report: [ 106.634504] ================================================================== [ 106.634623] BUG: KASAN: slab-use-after-free in mei_cl_set_disconnected (drivers/misc/mei/client.c:783) mei [ 106.634683] Read of size 4 at addr ffff88819cb62018 by task systemd-shutdow/1 [ 106.634729] [ 106.634767] Tainted: [E]=UNSIGNED_MODULE [ 106.634770] Hardware name: Dell Inc. XPS 16 9640/09CK4V, BIOS 1.12.0 02/10/2025 [ 106.634773] Call Trace: [ 106.634777] <TASK> ... [ 106.634871] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:636) [ 106.634901] mei_cl_set_disconnected (drivers/misc/mei/client.c:783) mei [ 106.634921] mei_cl_all_disconnect (drivers/misc/mei/client.c:2165 (discriminator 4)) mei [ 106.634941] mei_reset (drivers/misc/mei/init.c:163) mei ... [ 106.635042] mei_stop (drivers/misc/mei/init.c:348) mei [ 106.635062] mei_vsc_remove (drivers/misc/mei/mei_dev.h:784 drivers/misc/mei/platform-vsc.c:393) mei_vsc [ 106.635066] platform_remove (drivers/base/platform.c:1424) Add the missing mei_cldev_disable() calls so that the mei_cl gets removed from mei_device->file_list before it is freed to fix this.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Remove improper idxd_free The call to idxd_free() introduces a duplicate put_device() leading to a reference count underflow: refcount_t: underflow; use-after-free. WARNING: CPU: 15 PID: 4428 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110 ... Call Trace: <TASK> idxd_remove+0xe4/0x120 [idxd] pci_device_remove+0x3f/0xb0 device_release_driver_internal+0x197/0x200 driver_detach+0x48/0x90 bus_remove_driver+0x74/0xf0 pci_unregister_driver+0x2e/0xb0 idxd_exit_module+0x34/0x7a0 [idxd] __do_sys_delete_module.constprop.0+0x183/0x280 do_syscall_64+0x54/0xd70 entry_SYSCALL_64_after_hwframe+0x76/0x7e The idxd_unregister_devices() which is invoked at the very beginning of idxd_remove(), already takes care of the necessary put_device() through the following call path: idxd_unregister_devices() -> device_unregister() -> put_device() In addition, when CONFIG_DEBUG_KOBJECT_RELEASE is enabled, put_device() may trigger asynchronous cleanup via schedule_delayed_work(). If idxd_free() is called immediately after, it can result in a use-after-free. Remove the improper idxd_free() to avoid both the refcount underflow and potential memory corruption during module unload.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix use-after-free in amdgpu_userq_suspend+0x51a/0x5a0 [ +0.000020] BUG: KASAN: slab-use-after-free in amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu] [ +0.000817] Read of size 8 at addr ffff88812eec8c58 by task amd_pci_unplug/1733 [ +0.000027] CPU: 10 UID: 0 PID: 1733 Comm: amd_pci_unplug Tainted: G W 6.14.0+ #2 [ +0.000009] Tainted: [W]=WARN [ +0.000003] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020 [ +0.000004] Call Trace: [ +0.000004] <TASK> [ +0.000003] dump_stack_lvl+0x76/0xa0 [ +0.000011] print_report+0xce/0x600 [ +0.000009] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? kasan_complete_mode_report_info+0x76/0x200 [ +0.000007] ? kasan_addr_to_slab+0xd/0xb0 [ +0.000006] ? amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu] [ +0.000707] kasan_report+0xbe/0x110 [ +0.000006] ? amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu] [ +0.000541] __asan_report_load8_noabort+0x14/0x30 [ +0.000005] amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu] [ +0.000535] ? stop_cpsch+0x396/0x600 [amdgpu] [ +0.000556] ? stop_cpsch+0x429/0x600 [amdgpu] [ +0.000536] ? __pfx_amdgpu_userq_suspend+0x10/0x10 [amdgpu] [ +0.000536] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? kgd2kfd_suspend+0x132/0x1d0 [amdgpu] [ +0.000542] amdgpu_device_fini_hw+0x581/0xe90 [amdgpu] [ +0.000485] ? down_write+0xbb/0x140 [ +0.000007] ? __mutex_unlock_slowpath.constprop.0+0x317/0x360 [ +0.000005] ? __pfx_amdgpu_device_fini_hw+0x10/0x10 [amdgpu] [ +0.000482] ? __kasan_check_write+0x14/0x30 [ +0.000004] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? up_write+0x55/0xb0 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? blocking_notifier_chain_unregister+0x6c/0xc0 [ +0.000008] amdgpu_driver_unload_kms+0x69/0x90 [amdgpu] [ +0.000484] amdgpu_pci_remove+0x93/0x130 [amdgpu] [ +0.000482] pci_device_remove+0xae/0x1e0 [ +0.000008] device_remove+0xc7/0x180 [ +0.000008] device_release_driver_internal+0x3d4/0x5a0 [ +0.000007] device_release_driver+0x12/0x20 [ +0.000004] pci_stop_bus_device+0x104/0x150 [ +0.000006] pci_stop_and_remove_bus_device_locked+0x1b/0x40 [ +0.000005] remove_store+0xd7/0xf0 [ +0.000005] ? __pfx_remove_store+0x10/0x10 [ +0.000006] ? __pfx__copy_from_iter+0x10/0x10 [ +0.000006] ? __pfx_dev_attr_store+0x10/0x10 [ +0.000006] dev_attr_store+0x3f/0x80 [ +0.000006] sysfs_kf_write+0x125/0x1d0 [ +0.000004] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __kasan_check_write+0x14/0x30 [ +0.000005] kernfs_fop_write_iter+0x2ea/0x490 [ +0.000005] ? rw_verify_area+0x70/0x420 [ +0.000005] ? __pfx_kernfs_fop_write_iter+0x10/0x10 [ +0.000006] vfs_write+0x90d/0xe70 [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __pfx_vfs_write+0x10/0x10 [ +0.000004] ? local_clock+0x15/0x30 [ +0.000008] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? __kasan_slab_free+0x5f/0x80 [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? __kasan_check_read+0x11/0x20 [ +0.000004] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? fdget_pos+0x1d3/0x500 [ +0.000007] ksys_write+0x119/0x220 [ +0.000005] ? putname+0x1c/0x30 [ +0.000006] ? __pfx_ksys_write+0x10/0x10 [ +0.000007] __x64_sys_write+0x72/0xc0 [ +0.000006] x64_sys_call+0x18ab/0x26f0 [ +0.000006] do_syscall_64+0x7c/0x170 [ +0.000004] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? __pfx___x64_sys_openat+0x10/0x10 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? __kasan_check_read+0x11/0x20 [ +0.000003] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? fpregs_assert_state_consistent+0x21/0xb0 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? syscall_exit_to_user_mode+0x4e/0x240 [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? do_syscall_64+0x88/0x170 [ +0.000003] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? irqentry_exit+0x43/0x50 [ +0.000004] ? srso_return_thunk+0x5 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: appletalk: Fix use-after-free in AARP proxy probe The AARP proxy‐probe routine (aarp_proxy_probe_network) sends a probe, releases the aarp_lock, sleeps, then re-acquires the lock. During that window an expire timer thread (__aarp_expire_timer) can remove and kfree() the same entry, leading to a use-after-free. race condition: cpu 0 | cpu 1 atalk_sendmsg() | atif_proxy_probe_device() aarp_send_ddp() | aarp_proxy_probe_network() mod_timer() | lock(aarp_lock) // LOCK!! timeout around 200ms | alloc(aarp_entry) and then call | proxies[hash] = aarp_entry aarp_expire_timeout() | aarp_send_probe() | unlock(aarp_lock) // UNLOCK!! lock(aarp_lock) // LOCK!! | msleep(100); __aarp_expire_timer(&proxies[ct]) | free(aarp_entry) | unlock(aarp_lock) // UNLOCK!! | | lock(aarp_lock) // LOCK!! | UAF aarp_entry !! ================================================================== BUG: KASAN: slab-use-after-free in aarp_proxy_probe_network+0x560/0x630 net/appletalk/aarp.c:493 Read of size 4 at addr ffff8880123aa360 by task repro/13278 CPU: 3 UID: 0 PID: 13278 Comm: repro Not tainted 6.15.2 #3 PREEMPT(full) Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1b0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc1/0x630 mm/kasan/report.c:521 kasan_report+0xca/0x100 mm/kasan/report.c:634 aarp_proxy_probe_network+0x560/0x630 net/appletalk/aarp.c:493 atif_proxy_probe_device net/appletalk/ddp.c:332 [inline] atif_ioctl+0xb58/0x16c0 net/appletalk/ddp.c:857 atalk_ioctl+0x198/0x2f0 net/appletalk/ddp.c:1818 sock_do_ioctl+0xdc/0x260 net/socket.c:1190 sock_ioctl+0x239/0x6a0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x194/0x200 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcb/0x250 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated: aarp_alloc net/appletalk/aarp.c:382 [inline] aarp_proxy_probe_network+0xd8/0x630 net/appletalk/aarp.c:468 atif_proxy_probe_device net/appletalk/ddp.c:332 [inline] atif_ioctl+0xb58/0x16c0 net/appletalk/ddp.c:857 atalk_ioctl+0x198/0x2f0 net/appletalk/ddp.c:1818 Freed: kfree+0x148/0x4d0 mm/slub.c:4841 __aarp_expire net/appletalk/aarp.c:90 [inline] __aarp_expire_timer net/appletalk/aarp.c:261 [inline] aarp_expire_timeout+0x480/0x6e0 net/appletalk/aarp.c:317 The buggy address belongs to the object at ffff8880123aa300 which belongs to the cache kmalloc-192 of size 192 The buggy address is located 96 bytes inside of freed 192-byte region [ffff8880123aa300, ffff8880123aa3c0) Memory state around the buggy address: ffff8880123aa200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8880123aa280: 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc >ffff8880123aa300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880123aa380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8880123aa400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ==================================================================

In the Linux kernel, the following vulnerability has been resolved: media: vidtv: Terminating the subsequent process of initialization failure syzbot reported a slab-use-after-free Read in vidtv_mux_init. [1] After PSI initialization fails, the si member is accessed again, resulting in this uaf. After si initialization fails, the subsequent process needs to be exited. [1] BUG: KASAN: slab-use-after-free in vidtv_mux_pid_ctx_init drivers/media/test-drivers/vidtv/vidtv_mux.c:78 [inline] BUG: KASAN: slab-use-after-free in vidtv_mux_init+0xac2/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:524 Read of size 8 at addr ffff88802fa42acc by task syz.2.37/6059 CPU: 0 UID: 0 PID: 6059 Comm: syz.2.37 Not tainted 6.14.0-rc5-syzkaller #0 Hardware name: Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xd9/0x110 mm/kasan/report.c:634 vidtv_mux_pid_ctx_init drivers/media/test-drivers/vidtv/vidtv_mux.c:78 vidtv_mux_init+0xac2/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:524 vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 vidtv_start_feed drivers/media/test-drivers/vidtv/vidtv_bridge.c:239 dmx_section_feed_start_filtering drivers/media/dvb-core/dvb_demux.c:973 dvb_dmxdev_feed_start drivers/media/dvb-core/dmxdev.c:508 [inline] dvb_dmxdev_feed_restart.isra.0 drivers/media/dvb-core/dmxdev.c:537 dvb_dmxdev_filter_stop+0x2b4/0x3a0 drivers/media/dvb-core/dmxdev.c:564 dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline] dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246 __fput+0x3ff/0xb70 fs/file_table.c:464 task_work_run+0x14e/0x250 kernel/task_work.c:227 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0xad8/0x2d70 kernel/exit.c:938 do_group_exit+0xd3/0x2a0 kernel/exit.c:1087 __do_sys_exit_group kernel/exit.c:1098 [inline] __se_sys_exit_group kernel/exit.c:1096 [inline] __x64_sys_exit_group+0x3e/0x50 kernel/exit.c:1096 x64_sys_call+0x151f/0x1720 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f871d58d169 Code: Unable to access opcode bytes at 0x7f871d58d13f. RSP: 002b:00007fff4b19a788 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f871d58d169 RDX: 0000000000000064 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 00007fff4b19a7ec R08: 0000000b4b19a87f R09: 00000000000927c0 R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000003 R13: 00000000000927c0 R14: 000000000001d553 R15: 00007fff4b19a840 </TASK> Allocated by task 6059: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394 kmalloc_noprof include/linux/slab.h:901 [inline] kzalloc_noprof include/linux/slab.h:1037 [inline] vidtv_psi_pat_table_init drivers/media/test-drivers/vidtv/vidtv_psi.c:970 vidtv_channel_si_init drivers/media/test-drivers/vidtv/vidtv_channel.c:423 vidtv_mux_init drivers/media/test-drivers/vidtv/vidtv_mux.c:519 vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 vidtv_start_feed drivers/media/test-drivers/vidtv/vidtv_bridge.c:239 dmx_section_feed_start_filtering drivers/media/dvb-core/dvb_demux.c:973 dvb_dmxdev_feed_start drivers/media/dvb-core/dmxdev.c:508 [inline] dvb_dmxdev_feed_restart.isra.0 drivers/media/dvb-core/dmxdev.c:537 dvb_dmxdev_filter_stop+0x2b4/0x3a0 drivers/media/dvb-core/dmxdev.c:564 dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline] dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246 __fput+0x3ff/0xb70 fs/file_tabl ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ext4: ignore xattrs past end Once inside 'ext4_xattr_inode_dec_ref_all' we should ignore xattrs entries past the 'end' entry. This fixes the following KASAN reported issue: ================================================================== BUG: KASAN: slab-use-after-free in ext4_xattr_inode_dec_ref_all+0xb8c/0xe90 Read of size 4 at addr ffff888012c120c4 by task repro/2065 CPU: 1 UID: 0 PID: 2065 Comm: repro Not tainted 6.13.0-rc2+ #11 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x1fd/0x300 ? tcp_gro_dev_warn+0x260/0x260 ? _printk+0xc0/0x100 ? read_lock_is_recursive+0x10/0x10 ? irq_work_queue+0x72/0xf0 ? __virt_addr_valid+0x17b/0x4b0 print_address_description+0x78/0x390 print_report+0x107/0x1f0 ? __virt_addr_valid+0x17b/0x4b0 ? __virt_addr_valid+0x3ff/0x4b0 ? __phys_addr+0xb5/0x160 ? ext4_xattr_inode_dec_ref_all+0xb8c/0xe90 kasan_report+0xcc/0x100 ? ext4_xattr_inode_dec_ref_all+0xb8c/0xe90 ext4_xattr_inode_dec_ref_all+0xb8c/0xe90 ? ext4_xattr_delete_inode+0xd30/0xd30 ? __ext4_journal_ensure_credits+0x5f0/0x5f0 ? __ext4_journal_ensure_credits+0x2b/0x5f0 ? inode_update_timestamps+0x410/0x410 ext4_xattr_delete_inode+0xb64/0xd30 ? ext4_truncate+0xb70/0xdc0 ? ext4_expand_extra_isize_ea+0x1d20/0x1d20 ? __ext4_mark_inode_dirty+0x670/0x670 ? ext4_journal_check_start+0x16f/0x240 ? ext4_inode_is_fast_symlink+0x2f2/0x3a0 ext4_evict_inode+0xc8c/0xff0 ? ext4_inode_is_fast_symlink+0x3a0/0x3a0 ? do_raw_spin_unlock+0x53/0x8a0 ? ext4_inode_is_fast_symlink+0x3a0/0x3a0 evict+0x4ac/0x950 ? proc_nr_inodes+0x310/0x310 ? trace_ext4_drop_inode+0xa2/0x220 ? _raw_spin_unlock+0x1a/0x30 ? iput+0x4cb/0x7e0 do_unlinkat+0x495/0x7c0 ? try_break_deleg+0x120/0x120 ? 0xffffffff81000000 ? __check_object_size+0x15a/0x210 ? strncpy_from_user+0x13e/0x250 ? getname_flags+0x1dc/0x530 __x64_sys_unlinkat+0xc8/0xf0 do_syscall_64+0x65/0x110 entry_SYSCALL_64_after_hwframe+0x67/0x6f RIP: 0033:0x434ffd Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 8 RSP: 002b:00007ffc50fa7b28 EFLAGS: 00000246 ORIG_RAX: 0000000000000107 RAX: ffffffffffffffda RBX: 00007ffc50fa7e18 RCX: 0000000000434ffd RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000005 RBP: 00007ffc50fa7be0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 00007ffc50fa7e08 R14: 00000000004bbf30 R15: 0000000000000001 </TASK> The buggy address belongs to the object at ffff888012c12000 which belongs to the cache filp of size 360 The buggy address is located 196 bytes inside of freed 360-byte region [ffff888012c12000, ffff888012c12168) The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12c12 head: order:1 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x40(head|node=0|zone=0) page_type: f5(slab) raw: 0000000000000040 ffff888000ad7640 ffffea0000497a00 dead000000000004 raw: 0000000000000000 0000000000100010 00000001f5000000 0000000000000000 head: 0000000000000040 ffff888000ad7640 ffffea0000497a00 dead000000000004 head: 0000000000000000 0000000000100010 00000001f5000000 0000000000000000 head: 0000000000000001 ffffea00004b0481 ffffffffffffffff 0000000000000000 head: 0000000000000002 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888012c11f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888012c12000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb > ffff888012c12080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888012c12100: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc ffff888012c12180: fc fc fc fc fc fc fc fc fc ---truncated---

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Synchronous access b/w reset and tm thread for reply queue When the task management thread processes reply queues while the reset thread resets them, the task management thread accesses an invalid queue ID (0xFFFF), set by the reset thread, which points to unallocated memory, causing a crash. Add flag 'io_admin_reset_sync' to synchronize access between the reset, I/O, and admin threads. Before a reset, the reset handler sets this flag to block I/O and admin processing threads. If any thread bypasses the initial check, the reset thread waits up to 10 seconds for processing to finish. If the wait exceeds 10 seconds, the controller is marked as unrecoverable.

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix slab-use-after-free Read in rxe_queue_cleanup bug Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x7d/0xa0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcf/0x610 mm/kasan/report.c:489 kasan_report+0xb5/0xe0 mm/kasan/report.c:602 rxe_queue_cleanup+0xd0/0xe0 drivers/infiniband/sw/rxe/rxe_queue.c:195 rxe_cq_cleanup+0x3f/0x50 drivers/infiniband/sw/rxe/rxe_cq.c:132 __rxe_cleanup+0x168/0x300 drivers/infiniband/sw/rxe/rxe_pool.c:232 rxe_create_cq+0x22e/0x3a0 drivers/infiniband/sw/rxe/rxe_verbs.c:1109 create_cq+0x658/0xb90 drivers/infiniband/core/uverbs_cmd.c:1052 ib_uverbs_create_cq+0xc7/0x120 drivers/infiniband/core/uverbs_cmd.c:1095 ib_uverbs_write+0x969/0xc90 drivers/infiniband/core/uverbs_main.c:679 vfs_write fs/read_write.c:677 [inline] vfs_write+0x26a/0xcc0 fs/read_write.c:659 ksys_write+0x1b8/0x200 fs/read_write.c:731 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xaa/0x1b0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f In the function rxe_create_cq, when rxe_cq_from_init fails, the function rxe_cleanup will be called to handle the allocated resources. In fact, some memory resources have already been freed in the function rxe_cq_from_init. Thus, this problem will occur. The solution is to let rxe_cleanup do all the work.

In the Linux kernel, the following vulnerability has been resolved: net_sched: hfsc: Fix a potential UAF in hfsc_dequeue() too Similarly to the previous patch, we need to safe guard hfsc_dequeue() too. But for this one, we don't have a reliable reproducer.

In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v2m: Prevent use after free of gicv2m_get_fwnode() With ACPI in place, gicv2m_get_fwnode() is registered with the pci subsystem as pci_msi_get_fwnode_cb(), which may get invoked at runtime during a PCI host bridge probe. But, the call back is wrongly marked as __init, causing it to be freed, while being registered with the PCI subsystem and could trigger: Unable to handle kernel paging request at virtual address ffff8000816c0400 gicv2m_get_fwnode+0x0/0x58 (P) pci_set_bus_msi_domain+0x74/0x88 pci_register_host_bridge+0x194/0x548 This is easily reproducible on a Juno board with ACPI boot. Retain the function for later use.

In the Linux kernel, the following vulnerability has been resolved: net/sched: fix use-after-free in taprio_dev_notifier Since taprio’s taprio_dev_notifier() isn’t protected by an RCU read-side critical section, a race with advance_sched() can lead to a use-after-free. Adding rcu_read_lock() inside taprio_dev_notifier() prevents this.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix UAF in decryption with multichannel After commit f7025d861694 ("smb: client: allocate crypto only for primary server") and commit b0abcd65ec54 ("smb: client: fix UAF in async decryption"), the channels started reusing AEAD TFM from primary channel to perform synchronous decryption, but that can't done as there could be multiple cifsd threads (one per channel) simultaneously accessing it to perform decryption. This fixes the following KASAN splat when running fstest generic/249 with 'vers=3.1.1,multichannel,max_channels=4,seal' against Windows Server 2022: BUG: KASAN: slab-use-after-free in gf128mul_4k_lle+0xba/0x110 Read of size 8 at addr ffff8881046c18a0 by task cifsd/986 CPU: 3 UID: 0 PID: 986 Comm: cifsd Not tainted 6.15.0-rc1 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-3.fc41 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 print_report+0x156/0x528 ? gf128mul_4k_lle+0xba/0x110 ? __virt_addr_valid+0x145/0x300 ? __phys_addr+0x46/0x90 ? gf128mul_4k_lle+0xba/0x110 kasan_report+0xdf/0x1a0 ? gf128mul_4k_lle+0xba/0x110 gf128mul_4k_lle+0xba/0x110 ghash_update+0x189/0x210 shash_ahash_update+0x295/0x370 ? __pfx_shash_ahash_update+0x10/0x10 ? __pfx_shash_ahash_update+0x10/0x10 ? __pfx_extract_iter_to_sg+0x10/0x10 ? ___kmalloc_large_node+0x10e/0x180 ? __asan_memset+0x23/0x50 crypto_ahash_update+0x3c/0xc0 gcm_hash_assoc_remain_continue+0x93/0xc0 crypt_message+0xe09/0xec0 [cifs] ? __pfx_crypt_message+0x10/0x10 [cifs] ? _raw_spin_unlock+0x23/0x40 ? __pfx_cifs_readv_from_socket+0x10/0x10 [cifs] decrypt_raw_data+0x229/0x380 [cifs] ? __pfx_decrypt_raw_data+0x10/0x10 [cifs] ? __pfx_cifs_read_iter_from_socket+0x10/0x10 [cifs] smb3_receive_transform+0x837/0xc80 [cifs] ? __pfx_smb3_receive_transform+0x10/0x10 [cifs] ? __pfx___might_resched+0x10/0x10 ? __pfx_smb3_is_transform_hdr+0x10/0x10 [cifs] cifs_demultiplex_thread+0x692/0x1570 [cifs] ? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs] ? rcu_is_watching+0x20/0x50 ? rcu_lockdep_current_cpu_online+0x62/0xb0 ? find_held_lock+0x32/0x90 ? kvm_sched_clock_read+0x11/0x20 ? local_clock_noinstr+0xd/0xd0 ? trace_irq_enable.constprop.0+0xa8/0xe0 ? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs] kthread+0x1fe/0x380 ? kthread+0x10f/0x380 ? __pfx_kthread+0x10/0x10 ? local_clock_noinstr+0xd/0xd0 ? ret_from_fork+0x1b/0x60 ? local_clock+0x15/0x30 ? lock_release+0x29b/0x390 ? rcu_is_watching+0x20/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix a use-after-free in r535_gsp_rpc_push() The RPC container is released after being passed to r535_gsp_rpc_send(). When sending the initial fragment of a large RPC and passing the caller's RPC container, the container will be freed prematurely. Subsequent attempts to send remaining fragments will therefore result in a use-after-free. Allocate a temporary RPC container for holding the initial fragment of a large RPC when sending. Free the caller's container when all fragments are successfully sent. [ Rebase onto Blackwell changes. - Danilo ]

In the Linux kernel, the following vulnerability has been resolved: pds_core: remove write-after-free of client_id A use-after-free error popped up in stress testing: [Mon Apr 21 21:21:33 2025] BUG: KFENCE: use-after-free write in pdsc_auxbus_dev_del+0xef/0x160 [pds_core] [Mon Apr 21 21:21:33 2025] Use-after-free write at 0x000000007013ecd1 (in kfence-#47): [Mon Apr 21 21:21:33 2025] pdsc_auxbus_dev_del+0xef/0x160 [pds_core] [Mon Apr 21 21:21:33 2025] pdsc_remove+0xc0/0x1b0 [pds_core] [Mon Apr 21 21:21:33 2025] pci_device_remove+0x24/0x70 [Mon Apr 21 21:21:33 2025] device_release_driver_internal+0x11f/0x180 [Mon Apr 21 21:21:33 2025] driver_detach+0x45/0x80 [Mon Apr 21 21:21:33 2025] bus_remove_driver+0x83/0xe0 [Mon Apr 21 21:21:33 2025] pci_unregister_driver+0x1a/0x80 The actual device uninit usually happens on a separate thread scheduled after this code runs, but there is no guarantee of order of thread execution, so this could be a problem. There's no actual need to clear the client_id at this point, so simply remove the offending code.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Use local fence in error path of xe_migrate_clear The intent of the error path in xe_migrate_clear is to wait on locally generated fence and then return. The code is waiting on m->fence which could be the local fence but this is only stable under the job mutex leading to a possible UAF. Fix code to wait on local fence. (cherry picked from commit 762b7e95362170b3e13a8704f38d5e47eca4ba74)

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Avoid potential ndlp use-after-free in dev_loss_tmo_callbk Smatch detected a potential use-after-free of an ndlp oject in dev_loss_tmo_callbk during driver unload or fatal error handling. Fix by reordering code to avoid potential use-after-free if initial nodelist reference has been previously removed.

io_uring use work_flags to determine which identity need to grab from the calling process to make sure it is consistent with the calling process when executing IORING_OP. Some operations are missing some types, which can lead to incorrect reference counts which can then lead to a double free. We recommend upgrading the kernel past commit df3f3bb5059d20ef094d6b2f0256c4bf4127a859

In the Linux kernel, the following vulnerability has been resolved: rose: fix dangling neighbour pointers in rose_rt_device_down() There are two bugs in rose_rt_device_down() that can cause use-after-free: 1. The loop bound `t->count` is modified within the loop, which can cause the loop to terminate early and miss some entries. 2. When removing an entry from the neighbour array, the subsequent entries are moved up to fill the gap, but the loop index `i` is still incremented, causing the next entry to be skipped. For example, if a node has three neighbours (A, A, B) with count=3 and A is being removed, the second A is not checked. i=0: (A, A, B) -> (A, B) with count=2 ^ checked i=1: (A, B) -> (A, B) with count=2 ^ checked (B, not A!) i=2: (doesn't occur because i < count is false) This leaves the second A in the array with count=2, but the rose_neigh structure has been freed. Code that accesses these entries assumes that the first `count` entries are valid pointers, causing a use-after-free when it accesses the dangling pointer. Fix both issues by iterating over the array in reverse order with a fixed loop bound. This ensures that all entries are examined and that the removal of an entry doesn't affect subsequent iterations.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Check availability of workqueue allocated by idxd wq driver before using Running IDXD workloads in a container with the /dev directory mounted can trigger a call trace or even a kernel panic when the parent process of the container is terminated. This issue occurs because, under certain configurations, Docker does not properly propagate the mount replica back to the original mount point. In this case, when the user driver detaches, the WQ is destroyed but it still calls destroy_workqueue() attempting to completes all pending work. It's necessary to check wq->wq and skip the drain if it no longer exists.

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix isochronous Ring Underrun/Overrun event handling The TRB pointer of these events points at enqueue at the time of error occurrence on xHCI 1.1+ HCs or it's NULL on older ones. By the time we are handling the event, a new TD may be queued at this ring position. I can trigger this race by rising interrupt moderation to increase IRQ handling delay. Similar delay may occur naturally due to system load. If this ever happens after a Missed Service Error, missed TDs will be skipped and the new TD processed as if it matched the event. It could be given back prematurely, risking data loss or buffer UAF by the xHC. Don't complete TDs on xrun events and don't warn if queued TDs don't match the event's TRB pointer, which can be NULL or a link/no-op TRB. Don't warn if there are no queued TDs at all. Now that it's safe, also handle xrun events if the skip flag is clear. This ensures completion of any TD stuck in 'error mid TD' state right before the xrun event, which could happen if a driver submits a finite number of URBs to a buggy HC and then an error occurs on the last TD.

In the Linux kernel, the following vulnerability has been resolved: coresight: prevent deactivate active config while enabling the config While enable active config via cscfg_csdev_enable_active_config(), active config could be deactivated via configfs' sysfs interface. This could make UAF issue in below scenario: CPU0 CPU1 (sysfs enable) load module cscfg_load_config_sets() activate config. // sysfs (sys_active_cnt == 1) ... cscfg_csdev_enable_active_config() lock(csdev->cscfg_csdev_lock) // here load config activate by CPU1 unlock(csdev->cscfg_csdev_lock) deactivate config // sysfs (sys_activec_cnt == 0) cscfg_unload_config_sets() unload module // access to config_desc which freed // while unloading module. cscfg_csdev_enable_config To address this, use cscfg_config_desc's active_cnt as a reference count which will be holded when - activate the config. - enable the activated config. and put the module reference when config_active_cnt == 0.

In the Linux kernel, the following vulnerability has been resolved: alloc_tag: allocate percpu counters for module tags dynamically When a module gets unloaded it checks whether any of its tags are still in use and if so, we keep the memory containing module's allocation tags alive until all tags are unused. However percpu counters referenced by the tags are freed by free_module(). This will lead to UAF if the memory allocated by a module is accessed after module was unloaded. To fix this we allocate percpu counters for module allocation tags dynamically and we keep it alive for tags which are still in use after module unloading. This also removes the requirement of a larger PERCPU_MODULE_RESERVE when memory allocation profiling is enabled because percpu memory for counters does not need to be reserved anymore.

In the Linux kernel, the following vulnerability has been resolved: ipc: fix to protect IPCS lookups using RCU syzbot reported that it discovered a use-after-free vulnerability, [0] [0]: https://lore.kernel.org/all/67af13f8.050a0220.21dd3.0038.GAE@google.com/ idr_for_each() is protected by rwsem, but this is not enough. If it is not protected by RCU read-critical region, when idr_for_each() calls radix_tree_node_free() through call_rcu() to free the radix_tree_node structure, the node will be freed immediately, and when reading the next node in radix_tree_for_each_slot(), the already freed memory may be read. Therefore, we need to add code to make sure that idr_for_each() is protected within the RCU read-critical region when we call it in shm_destroy_orphaned().

In the Linux kernel, the following vulnerability has been resolved: RDMA/iwcm: Fix use-after-free of work objects after cm_id destruction The commit 59c68ac31e15 ("iw_cm: free cm_id resources on the last deref") simplified cm_id resource management by freeing cm_id once all references to the cm_id were removed. The references are removed either upon completion of iw_cm event handlers or when the application destroys the cm_id. This commit introduced the use-after-free condition where cm_id_private object could still be in use by event handler works during the destruction of cm_id. The commit aee2424246f9 ("RDMA/iwcm: Fix a use-after-free related to destroying CM IDs") addressed this use-after- free by flushing all pending works at the cm_id destruction. However, still another use-after-free possibility remained. It happens with the work objects allocated for each cm_id_priv within alloc_work_entries() during cm_id creation, and subsequently freed in dealloc_work_entries() once all references to the cm_id are removed. If the cm_id's last reference is decremented in the event handler work, the work object for the work itself gets removed, and causes the use- after-free BUG below: BUG: KASAN: slab-use-after-free in __pwq_activate_work+0x1ff/0x250 Read of size 8 at addr ffff88811f9cf800 by task kworker/u16:1/147091 CPU: 2 UID: 0 PID: 147091 Comm: kworker/u16:1 Not tainted 6.15.0-rc2+ #27 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 Workqueue: 0x0 (iw_cm_wq) Call Trace: <TASK> dump_stack_lvl+0x6a/0x90 print_report+0x174/0x554 ? __virt_addr_valid+0x208/0x430 ? __pwq_activate_work+0x1ff/0x250 kasan_report+0xae/0x170 ? __pwq_activate_work+0x1ff/0x250 __pwq_activate_work+0x1ff/0x250 pwq_dec_nr_in_flight+0x8c5/0xfb0 process_one_work+0xc11/0x1460 ? __pfx_process_one_work+0x10/0x10 ? assign_work+0x16c/0x240 worker_thread+0x5ef/0xfd0 ? __pfx_worker_thread+0x10/0x10 kthread+0x3b0/0x770 ? __pfx_kthread+0x10/0x10 ? rcu_is_watching+0x11/0xb0 ? _raw_spin_unlock_irq+0x24/0x50 ? rcu_is_watching+0x11/0xb0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 147416: kasan_save_stack+0x2c/0x50 kasan_save_track+0x10/0x30 __kasan_kmalloc+0xa6/0xb0 alloc_work_entries+0xa9/0x260 [iw_cm] iw_cm_connect+0x23/0x4a0 [iw_cm] rdma_connect_locked+0xbfd/0x1920 [rdma_cm] nvme_rdma_cm_handler+0x8e5/0x1b60 [nvme_rdma] cma_cm_event_handler+0xae/0x320 [rdma_cm] cma_work_handler+0x106/0x1b0 [rdma_cm] process_one_work+0x84f/0x1460 worker_thread+0x5ef/0xfd0 kthread+0x3b0/0x770 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 Freed by task 147091: kasan_save_stack+0x2c/0x50 kasan_save_track+0x10/0x30 kasan_save_free_info+0x37/0x60 __kasan_slab_free+0x4b/0x70 kfree+0x13a/0x4b0 dealloc_work_entries+0x125/0x1f0 [iw_cm] iwcm_deref_id+0x6f/0xa0 [iw_cm] cm_work_handler+0x136/0x1ba0 [iw_cm] process_one_work+0x84f/0x1460 worker_thread+0x5ef/0xfd0 kthread+0x3b0/0x770 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 Last potentially related work creation: kasan_save_stack+0x2c/0x50 kasan_record_aux_stack+0xa3/0xb0 __queue_work+0x2ff/0x1390 queue_work_on+0x67/0xc0 cm_event_handler+0x46a/0x820 [iw_cm] siw_cm_upcall+0x330/0x650 [siw] siw_cm_work_handler+0x6b9/0x2b20 [siw] process_one_work+0x84f/0x1460 worker_thread+0x5ef/0xfd0 kthread+0x3b0/0x770 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 This BUG is reproducible by repeating the blktests test case nvme/061 for the rdma transport and the siw driver. To avoid the use-after-free of cm_id_private work objects, ensure that the last reference to the cm_id is decremented not in the event handler works, but in the cm_id destruction context. For that purpose, mo ---truncated---

In the Linux kernel, the following vulnerability has been resolved: dm: fix dm_blk_report_zones If dm_get_live_table() returned NULL, dm_put_live_table() was never called. Also, it is possible that md->zone_revalidate_map will change while calling this function. Only read it once, so that we are always using the same value. Otherwise we might miss a call to dm_put_live_table(). Finally, while md->zone_revalidate_map is set and a process is calling blk_revalidate_disk_zones() to set up the zone append emulation resources, it is possible that another process, perhaps triggered by blkdev_report_zones_ioctl(), will call dm_blk_report_zones(). If blk_revalidate_disk_zones() fails, these resources can be freed while the other process is still using them, causing a use-after-free error. blk_revalidate_disk_zones() will only ever be called when initially setting up the zone append emulation resources, such as when setting up a zoned dm-crypt table for the first time. Further table swaps will not set md->zone_revalidate_map or call blk_revalidate_disk_zones(). However it must be called using the new table (referenced by md->zone_revalidate_map) and the new queue limits while the DM device is suspended. dm_blk_report_zones() needs some way to distinguish between a call from blk_revalidate_disk_zones(), which must be allowed to use md->zone_revalidate_map to access this not yet activated table, and all other calls to dm_blk_report_zones(), which should not be allowed while the device is suspended and cannot use md->zone_revalidate_map, since the zone resources might be freed by the process currently calling blk_revalidate_disk_zones(). Solve this by tracking the process that sets md->zone_revalidate_map in dm_revalidate_zones() and only allowing that process to make use of it in dm_blk_report_zones().

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix UAF when lookup kallsym after ftrace disabled The following issue happens with a buggy module: BUG: unable to handle page fault for address: ffffffffc05d0218 PGD 1bd66f067 P4D 1bd66f067 PUD 1bd671067 PMD 101808067 PTE 0 Oops: Oops: 0000 [#1] SMP KASAN PTI Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS RIP: 0010:sized_strscpy+0x81/0x2f0 RSP: 0018:ffff88812d76fa08 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffffffc0601010 RCX: dffffc0000000000 RDX: 0000000000000038 RSI: dffffc0000000000 RDI: ffff88812608da2d RBP: 8080808080808080 R08: ffff88812608da2d R09: ffff88812608da68 R10: ffff88812608d82d R11: ffff88812608d810 R12: 0000000000000038 R13: ffff88812608da2d R14: ffffffffc05d0218 R15: fefefefefefefeff FS: 00007fef552de740(0000) GS:ffff8884251c7000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffc05d0218 CR3: 00000001146f0000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ftrace_mod_get_kallsym+0x1ac/0x590 update_iter_mod+0x239/0x5b0 s_next+0x5b/0xa0 seq_read_iter+0x8c9/0x1070 seq_read+0x249/0x3b0 proc_reg_read+0x1b0/0x280 vfs_read+0x17f/0x920 ksys_read+0xf3/0x1c0 do_syscall_64+0x5f/0x2e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The above issue may happen as follows: (1) Add kprobe tracepoint; (2) insmod test.ko; (3) Module triggers ftrace disabled; (4) rmmod test.ko; (5) cat /proc/kallsyms; --> Will trigger UAF as test.ko already removed; ftrace_mod_get_kallsym() ... strscpy(module_name, mod_map->mod->name, MODULE_NAME_LEN); ... The problem is when a module triggers an issue with ftrace and sets ftrace_disable. The ftrace_disable is set when an anomaly is discovered and to prevent any more damage, ftrace stops all text modification. The issue that happened was that the ftrace_disable stops more than just the text modification. When a module is loaded, its init functions can also be traced. Because kallsyms deletes the init functions after a module has loaded, ftrace saves them when the module is loaded and function tracing is enabled. This allows the output of the function trace to show the init function names instead of just their raw memory addresses. When a module is removed, ftrace_release_mod() is called, and if ftrace_disable is set, it just returns without doing anything more. The problem here is that it leaves the mod_list still around and if kallsyms is called, it will call into this code and access the module memory that has already been freed as it will return: strscpy(module_name, mod_map->mod->name, MODULE_NAME_LEN); Where the "mod" no longer exists and triggers a UAF bug.

In the Linux kernel, the following vulnerability has been resolved: wifi: at76c50x: fix use after free access in at76_disconnect The memory pointed to by priv is freed at the end of at76_delete_device function (using ieee80211_free_hw). But the code then accesses the udev field of the freed object to put the USB device. This may also lead to a memory leak of the usb device. Fix this by using udev from interface.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in __smb2_lease_break_noti() Move tcp_transport free to ksmbd_conn_free. If ksmbd connection is referenced when ksmbd server thread terminates, It will not be freed, but conn->tcp_transport is freed. __smb2_lease_break_noti can be performed asynchronously when the connection is disconnected. __smb2_lease_break_noti calls ksmbd_conn_write, which can cause use-after-free when conn->ksmbd_transport is already freed.

In the Linux kernel, the following vulnerability has been resolved: binder: fix yet another UAF in binder_devices Commit e77aff5528a18 ("binderfs: fix use-after-free in binder_devices") addressed a use-after-free where devices could be released without first being removed from the binder_devices list. However, there is a similar path in binder_free_proc() that was missed: ================================================================== BUG: KASAN: slab-use-after-free in binder_remove_device+0xd4/0x100 Write of size 8 at addr ffff0000c773b900 by task umount/467 CPU: 12 UID: 0 PID: 467 Comm: umount Not tainted 6.15.0-rc7-00138-g57483a362741 #9 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: binder_remove_device+0xd4/0x100 binderfs_evict_inode+0x230/0x2f0 evict+0x25c/0x5dc iput+0x304/0x480 dentry_unlink_inode+0x208/0x46c __dentry_kill+0x154/0x530 [...] Allocated by task 463: __kmalloc_cache_noprof+0x13c/0x324 binderfs_binder_device_create.isra.0+0x138/0xa60 binder_ctl_ioctl+0x1ac/0x230 [...] Freed by task 215: kfree+0x184/0x31c binder_proc_dec_tmpref+0x33c/0x4ac binder_deferred_func+0xc10/0x1108 process_one_work+0x520/0xba4 [...] ================================================================== Call binder_remove_device() within binder_free_proc() to ensure the device is removed from the binder_devices list before being kfreed.

In the Linux kernel, the following vulnerability has been resolved: net: atm: fix /proc/net/atm/lec handling /proc/net/atm/lec must ensure safety against dev_lec[] changes. It appears it had dev_put() calls without prior dev_hold(), leading to imbalance and UAF.

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd9335: Fix missing free of regulator supplies Driver gets and enables all regulator supplies in probe path (wcd9335_parse_dt() and wcd9335_power_on_reset()), but does not cleanup in final error paths and in unbind (missing remove() callback). This leads to leaked memory and unbalanced regulator enable count during probe errors or unbind. Fix this by converting entire code into devm_regulator_bulk_get_enable() which also greatly simplifies the code.

In the Linux kernel, the following vulnerability has been resolved: tracing: fprobe events: Fix possible UAF on modules Commit ac91052f0ae5 ("tracing: tprobe-events: Fix leakage of module refcount") moved try_module_get() from __find_tracepoint_module_cb() to find_tracepoint() caller, but that introduced a possible UAF because the module can be unloaded before try_module_get(). In this case, the module object should be freed too. Thus, try_module_get() does not only fail but may access to the freed object. To avoid that, try_module_get() in __find_tracepoint_module_cb() again.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix ECVF vports unload on shutdown flow Fix shutdown flow UAF when a virtual function is created on the embedded chip (ECVF) of a BlueField device. In such case the vport acl ingress table is not properly destroyed. ECVF functionality is independent of ecpf_vport_exists capability and thus functions mlx5_eswitch_(enable|disable)_pf_vf_vports() should not test it when enabling/disabling ECVF vports. kernel log: [] refcount_t: underflow; use-after-free. [] WARNING: CPU: 3 PID: 1 at lib/refcount.c:28 refcount_warn_saturate+0x124/0x220 ---------------- [] Call trace: [] refcount_warn_saturate+0x124/0x220 [] tree_put_node+0x164/0x1e0 [mlx5_core] [] mlx5_destroy_flow_table+0x98/0x2c0 [mlx5_core] [] esw_acl_ingress_table_destroy+0x28/0x40 [mlx5_core] [] esw_acl_ingress_lgcy_cleanup+0x80/0xf4 [mlx5_core] [] esw_legacy_vport_acl_cleanup+0x44/0x60 [mlx5_core] [] esw_vport_cleanup+0x64/0x90 [mlx5_core] [] mlx5_esw_vport_disable+0xc0/0x1d0 [mlx5_core] [] mlx5_eswitch_unload_ec_vf_vports+0xcc/0x150 [mlx5_core] [] mlx5_eswitch_disable_sriov+0x198/0x2a0 [mlx5_core] [] mlx5_device_disable_sriov+0xb8/0x1e0 [mlx5_core] [] mlx5_sriov_detach+0x40/0x50 [mlx5_core] [] mlx5_unload+0x40/0xc4 [mlx5_core] [] mlx5_unload_one_devl_locked+0x6c/0xe4 [mlx5_core] [] mlx5_unload_one+0x3c/0x60 [mlx5_core] [] shutdown+0x7c/0xa4 [mlx5_core] [] pci_device_shutdown+0x3c/0xa0 [] device_shutdown+0x170/0x340 [] __do_sys_reboot+0x1f4/0x2a0 [] __arm64_sys_reboot+0x2c/0x40 [] invoke_syscall+0x78/0x100 [] el0_svc_common.constprop.0+0x54/0x184 [] do_el0_svc+0x30/0xac [] el0_svc+0x48/0x160 [] el0t_64_sync_handler+0xa4/0x12c [] el0t_64_sync+0x1a4/0x1a8 [] --[ end trace 9c4601d68c70030e ]---

In the Linux kernel, the following vulnerability has been resolved: net_sched: hfsc: Fix a UAF vulnerability in class with netem as child qdisc As described in Gerrard's report [1], we have a UAF case when an hfsc class has a netem child qdisc. The crux of the issue is that hfsc is assuming that checking for cl->qdisc->q.qlen == 0 guarantees that it hasn't inserted the class in the vttree or eltree (which is not true for the netem duplicate case). This patch checks the n_active class variable to make sure that the code won't insert the class in the vttree or eltree twice, catering for the reentrant case. [1] https://lore.kernel.org/netdev/CAHcdcOm+03OD2j6R0=YHKqmy=VgJ8xEOKuP6c7mSgnp-TEJJbw@mail.gmail.com/

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Reset IRTE to host control if *new* route isn't postable Restore an IRTE back to host control (remapped or posted MSI mode) if the *new* GSI route prevents posting the IRQ directly to a vCPU, regardless of the GSI routing type. Updating the IRTE if and only if the new GSI is an MSI results in KVM leaving an IRTE posting to a vCPU. The dangling IRTE can result in interrupts being incorrectly delivered to the guest, and in the worst case scenario can result in use-after-free, e.g. if the VM is torn down, but the underlying host IRQ isn't freed.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix mode1 reset crash issue If HW scheduler hangs and mode1 reset is used to recover GPU, KFD signal user space to abort the processes. After process abort exit, user queues still use the GPU to access system memory before h/w is reset while KFD cleanup worker free system memory and free VRAM. There is use-after-free race bug that KFD allocate and reuse the freed system memory, and user queue write to the same system memory to corrupt the data structure and cause driver crash. To fix this race, KFD cleanup worker terminate user queues, then flush reset_domain wq to wait for any GPU ongoing reset complete, and then free outstanding BOs.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix uaf in ath12k_core_init() When the execution of ath12k_core_hw_group_assign() or ath12k_core_hw_group_create() fails, the registered notifier chain is not unregistered properly. Its memory is freed after rmmod, which may trigger to a use-after-free (UAF) issue if there is a subsequent access to this notifier chain. Fixes the issue by calling ath12k_core_panic_notifier_unregister() in failure cases. Call trace: notifier_chain_register+0x4c/0x1f0 (P) atomic_notifier_chain_register+0x38/0x68 ath12k_core_init+0x50/0x4e8 [ath12k] ath12k_pci_probe+0x5f8/0xc28 [ath12k] pci_device_probe+0xbc/0x1a8 really_probe+0xc8/0x3a0 __driver_probe_device+0x84/0x1b0 driver_probe_device+0x44/0x130 __driver_attach+0xcc/0x208 bus_for_each_dev+0x84/0x100 driver_attach+0x2c/0x40 bus_add_driver+0x130/0x260 driver_register+0x70/0x138 __pci_register_driver+0x68/0x80 ath12k_pci_init+0x30/0x68 [ath12k] ath12k_init+0x28/0x78 [ath12k] Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3