A pivot_root race condition in fs/namespace.c in the Linux kernel 4.4.x before 4.4.221, 4.9.x before 4.9.221, 4.14.x before 4.14.178, 4.19.x before 4.19.119, and 5.x before 5.3 allows local users to cause a denial of service (panic) by corrupting a mountpoint reference counter.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Always drain health in shutdown callback There is no point in recovery during device shutdown. if health work started need to wait for it to avoid races and NULL pointer access. Hence, drain health WQ on shutdown callback.

In the Linux kernel, the following vulnerability has been resolved: erofs: fix race in z_erofs_get_gbuf() In z_erofs_get_gbuf(), the current task may be migrated to another CPU between `z_erofs_gbuf_id()` and `spin_lock(&gbuf->lock)`. Therefore, z_erofs_put_gbuf() will trigger the following issue which was found by stress test: <2>[772156.434168] kernel BUG at fs/erofs/zutil.c:58! .. <4>[772156.435007] <4>[772156.439237] CPU: 0 PID: 3078 Comm: stress Kdump: loaded Tainted: G E 6.10.0-rc7+ #2 <4>[772156.439239] Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 1.0.0 01/01/2017 <4>[772156.439241] pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) <4>[772156.439243] pc : z_erofs_put_gbuf+0x64/0x70 [erofs] <4>[772156.439252] lr : z_erofs_lz4_decompress+0x600/0x6a0 [erofs] .. <6>[772156.445958] stress (3127): drop_caches: 1 <4>[772156.446120] Call trace: <4>[772156.446121] z_erofs_put_gbuf+0x64/0x70 [erofs] <4>[772156.446761] z_erofs_lz4_decompress+0x600/0x6a0 [erofs] <4>[772156.446897] z_erofs_decompress_queue+0x740/0xa10 [erofs] <4>[772156.447036] z_erofs_runqueue+0x428/0x8c0 [erofs] <4>[772156.447160] z_erofs_readahead+0x224/0x390 [erofs] ..

In the Linux kernel, the following vulnerability has been resolved: netpoll: Fix race condition in netpoll_owner_active KCSAN detected a race condition in netpoll: BUG: KCSAN: data-race in net_rx_action / netpoll_send_skb write (marked) to 0xffff8881164168b0 of 4 bytes by interrupt on cpu 10: net_rx_action (./include/linux/netpoll.h:90 net/core/dev.c:6712 net/core/dev.c:6822) <snip> read to 0xffff8881164168b0 of 4 bytes by task 1 on cpu 2: netpoll_send_skb (net/core/netpoll.c:319 net/core/netpoll.c:345 net/core/netpoll.c:393) netpoll_send_udp (net/core/netpoll.c:?) <snip> value changed: 0x0000000a -> 0xffffffff This happens because netpoll_owner_active() needs to check if the current CPU is the owner of the lock, touching napi->poll_owner non atomically. The ->poll_owner field contains the current CPU holding the lock. Use an atomic read to check if the poll owner is the current CPU.

In the Linux kernel, the following vulnerability has been resolved: filelock: Fix fcntl/close race recovery compat path When I wrote commit 3cad1bc01041 ("filelock: Remove locks reliably when fcntl/close race is detected"), I missed that there are two copies of the code I was patching: The normal version, and the version for 64-bit offsets on 32-bit kernels. Thanks to Greg KH for stumbling over this while doing the stable backport... Apply exactly the same fix to the compat path for 32-bit kernels.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix races between hole punching and AIO+DIO After commit "ocfs2: return real error code in ocfs2_dio_wr_get_block", fstests/generic/300 become from always failed to sometimes failed: ======================================================================== [ 473.293420 ] run fstests generic/300 [ 475.296983 ] JBD2: Ignoring recovery information on journal [ 475.302473 ] ocfs2: Mounting device (253,1) on (node local, slot 0) with ordered data mode. [ 494.290998 ] OCFS2: ERROR (device dm-1): ocfs2_change_extent_flag: Owner 5668 has an extent at cpos 78723 which can no longer be found [ 494.291609 ] On-disk corruption discovered. Please run fsck.ocfs2 once the filesystem is unmounted. [ 494.292018 ] OCFS2: File system is now read-only. [ 494.292224 ] (kworker/19:11,2628,19):ocfs2_mark_extent_written:5272 ERROR: status = -30 [ 494.292602 ] (kworker/19:11,2628,19):ocfs2_dio_end_io_write:2374 ERROR: status = -3 fio: io_u error on file /mnt/scratch/racer: Read-only file system: write offset=460849152, buflen=131072 ========================================================================= In __blockdev_direct_IO, ocfs2_dio_wr_get_block is called to add unwritten extents to a list. extents are also inserted into extent tree in ocfs2_write_begin_nolock. Then another thread call fallocate to puch a hole at one of the unwritten extent. The extent at cpos was removed by ocfs2_remove_extent(). At end io worker thread, ocfs2_search_extent_list found there is no such extent at the cpos. T1 T2 T3 inode lock ... insert extents ... inode unlock ocfs2_fallocate __ocfs2_change_file_space inode lock lock ip_alloc_sem ocfs2_remove_inode_range inode ocfs2_remove_btree_range ocfs2_remove_extent ^---remove the extent at cpos 78723 ... unlock ip_alloc_sem inode unlock ocfs2_dio_end_io ocfs2_dio_end_io_write lock ip_alloc_sem ocfs2_mark_extent_written ocfs2_change_extent_flag ocfs2_search_extent_list ^---failed to find extent ... unlock ip_alloc_sem In most filesystems, fallocate is not compatible with racing with AIO+DIO, so fix it by adding to wait for all dio before fallocate/punch_hole like ext4.

In the Linux kernel, the following vulnerability has been resolved: btrfs: use latest_dev in btrfs_show_devname The test case btrfs/238 reports the warning below: WARNING: CPU: 3 PID: 481 at fs/btrfs/super.c:2509 btrfs_show_devname+0x104/0x1e8 [btrfs] CPU: 2 PID: 1 Comm: systemd Tainted: G W O 5.14.0-rc1-custom #72 Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 Call trace: btrfs_show_devname+0x108/0x1b4 [btrfs] show_mountinfo+0x234/0x2c4 m_show+0x28/0x34 seq_read_iter+0x12c/0x3c4 vfs_read+0x29c/0x2c8 ksys_read+0x80/0xec __arm64_sys_read+0x28/0x34 invoke_syscall+0x50/0xf8 do_el0_svc+0x88/0x138 el0_svc+0x2c/0x8c el0t_64_sync_handler+0x84/0xe4 el0t_64_sync+0x198/0x19c Reason: While btrfs_prepare_sprout() moves the fs_devices::devices into fs_devices::seed_list, the btrfs_show_devname() searches for the devices and found none, leading to the warning as in above. Fix: latest_dev is updated according to the changes to the device list. That means we could use the latest_dev->name to show the device name in /proc/self/mounts, the pointer will be always valid as it's assigned before the device is deleted from the list in remove or replace. The RCU protection is sufficient as the device structure is freed after synchronization.

In the Linux kernel, the following vulnerability has been resolved: btrfs: protect folio::private when attaching extent buffer folios [BUG] Since v6.8 there are rare kernel crashes reported by various people, the common factor is bad page status error messages like this: BUG: Bad page state in process kswapd0 pfn:d6e840 page: refcount:0 mapcount:0 mapping:000000007512f4f2 index:0x2796c2c7c pfn:0xd6e840 aops:btree_aops ino:1 flags: 0x17ffffe0000008(uptodate|node=0|zone=2|lastcpupid=0x3fffff) page_type: 0xffffffff() raw: 0017ffffe0000008 dead000000000100 dead000000000122 ffff88826d0be4c0 raw: 00000002796c2c7c 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: non-NULL mapping [CAUSE] Commit 09e6cef19c9f ("btrfs: refactor alloc_extent_buffer() to allocate-then-attach method") changes the sequence when allocating a new extent buffer. Previously we always called grab_extent_buffer() under mapping->i_private_lock, to ensure the safety on modification on folio::private (which is a pointer to extent buffer for regular sectorsize). This can lead to the following race: Thread A is trying to allocate an extent buffer at bytenr X, with 4 4K pages, meanwhile thread B is trying to release the page at X + 4K (the second page of the extent buffer at X). Thread A | Thread B -----------------------------------+------------------------------------- | btree_release_folio() | | This is for the page at X + 4K, | | Not page X. | | alloc_extent_buffer() | |- release_extent_buffer() |- filemap_add_folio() for the | | |- atomic_dec_and_test(eb->refs) | page at bytenr X (the first | | | | page). | | | | Which returned -EEXIST. | | | | | | | |- filemap_lock_folio() | | | | Returned the first page locked. | | | | | | | |- grab_extent_buffer() | | | | |- atomic_inc_not_zero() | | | | | Returned false | | | | |- folio_detach_private() | | |- folio_detach_private() for X | |- folio_test_private() | | |- folio_test_private() | Returned true | | | Returned true |- folio_put() | |- folio_put() Now there are two puts on the same folio at folio X, leading to refcount underflow of the folio X, and eventually causing the BUG_ON() on the page->mapping. The condition is not that easy to hit: - The release must be triggered for the middle page of an eb If the release is on the same first page of an eb, page lock would kick in and prevent the race. - folio_detach_private() has a very small race window It's only between folio_test_private() and folio_clear_private(). That's exactly when mapping->i_private_lock is used to prevent such race, and commit 09e6cef19c9f ("btrfs: refactor alloc_extent_buffer() to allocate-then-attach method") screwed that up. At that time, I thought the page lock would kick in as filemap_release_folio() also requires the page to be locked, but forgot the filemap_release_folio() only locks one page, not all pages of an extent buffer. [FIX] Move all the code requiring i_private_lock into attach_eb_folio_to_filemap(), so that everything is done with proper lock protection. Furthermore to prevent future problems, add an extra lockdep_assert_locked() to ensure we're holding the proper lock. To reproducer that is able to hit the race (takes a few minutes with instrumented code inserting delays to alloc_extent_buffer()): #!/bin/sh drop_caches () { while(true); do echo 3 > /proc/sys/vm/drop_caches echo 1 > /proc/sys/vm/compact_memory done } run_tar () { while(true); do for x in `seq 1 80` ; do tar cf /dev/zero /mnt > /dev/null & done wait done } mkfs.btrfs -f -d single -m single ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc_submit: fix race around suspend_pending Currently in some testcases we can trigger: xe 0000:03:00.0: [drm] Assertion `exec_queue_destroyed(q)` failed! .... WARNING: CPU: 18 PID: 2640 at drivers/gpu/drm/xe/xe_guc_submit.c:1826 xe_guc_sched_done_handler+0xa54/0xef0 [xe] xe 0000:03:00.0: [drm] *ERROR* GT1: DEREGISTER_DONE: Unexpected engine state 0x00a1, guc_id=57 Looking at a snippet of corresponding ftrace for this GuC id we can see: 162.673311: xe_sched_msg_add: dev=0000:03:00.0, gt=1 guc_id=57, opcode=3 162.673317: xe_sched_msg_recv: dev=0000:03:00.0, gt=1 guc_id=57, opcode=3 162.673319: xe_exec_queue_scheduling_disable: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0x29, flags=0x0 162.674089: xe_exec_queue_kill: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0x29, flags=0x0 162.674108: xe_exec_queue_close: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0xa9, flags=0x0 162.674488: xe_exec_queue_scheduling_done: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0xa9, flags=0x0 162.678452: xe_exec_queue_deregister: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0xa1, flags=0x0 It looks like we try to suspend the queue (opcode=3), setting suspend_pending and triggering a disable_scheduling. The user then closes the queue. However the close will also forcefully signal the suspend fence after killing the queue, later when the G2H response for disable_scheduling comes back we have now cleared suspend_pending when signalling the suspend fence, so the disable_scheduling now incorrectly tries to also deregister the queue. This leads to warnings since the queue has yet to even be marked for destruction. We also seem to trigger errors later with trying to double unregister the same queue. To fix this tweak the ordering when handling the response to ensure we don't race with a disable_scheduling that didn't actually intend to perform an unregister. The destruction path should now also correctly wait for any pending_disable before marking as destroyed. (cherry picked from commit f161809b362f027b6d72bd998e47f8f0bad60a2e)

In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix data races in unix_release_sock/unix_stream_sendmsg A data-race condition has been identified in af_unix. In one data path, the write function unix_release_sock() atomically writes to sk->sk_shutdown using WRITE_ONCE. However, on the reader side, unix_stream_sendmsg() does not read it atomically. Consequently, this issue is causing the following KCSAN splat to occur: BUG: KCSAN: data-race in unix_release_sock / unix_stream_sendmsg write (marked) to 0xffff88867256ddbb of 1 bytes by task 7270 on cpu 28: unix_release_sock (net/unix/af_unix.c:640) unix_release (net/unix/af_unix.c:1050) sock_close (net/socket.c:659 net/socket.c:1421) __fput (fs/file_table.c:422) __fput_sync (fs/file_table.c:508) __se_sys_close (fs/open.c:1559 fs/open.c:1541) __x64_sys_close (fs/open.c:1541) x64_sys_call (arch/x86/entry/syscall_64.c:33) do_syscall_64 (arch/x86/entry/common.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) read to 0xffff88867256ddbb of 1 bytes by task 989 on cpu 14: unix_stream_sendmsg (net/unix/af_unix.c:2273) __sock_sendmsg (net/socket.c:730 net/socket.c:745) ____sys_sendmsg (net/socket.c:2584) __sys_sendmmsg (net/socket.c:2638 net/socket.c:2724) __x64_sys_sendmmsg (net/socket.c:2753 net/socket.c:2750 net/socket.c:2750) x64_sys_call (arch/x86/entry/syscall_64.c:33) do_syscall_64 (arch/x86/entry/common.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) value changed: 0x01 -> 0x03 The line numbers are related to commit dd5a440a31fa ("Linux 6.9-rc7"). Commit e1d09c2c2f57 ("af_unix: Fix data races around sk->sk_shutdown.") addressed a comparable issue in the past regarding sk->sk_shutdown. However, it overlooked resolving this particular data path. This patch only offending unix_stream_sendmsg() function, since the other reads seem to be protected by unix_state_lock() as discussed in

In the Linux kernel, the following vulnerability has been resolved: cgroup: fix race between task migration and iteration When a task is migrated out of a css_set, cgroup_migrate_add_task() first moves it from cset->tasks to cset->mg_tasks via: list_move_tail(&task->cg_list, &cset->mg_tasks); If a css_task_iter currently has it->task_pos pointing to this task, css_set_move_task() calls css_task_iter_skip() to keep the iterator valid. However, since the task has already been moved to ->mg_tasks, the iterator is advanced relative to the mg_tasks list instead of the original tasks list. As a result, remaining tasks on cset->tasks, as well as tasks queued on cset->mg_tasks, can be skipped by iteration. Fix this by calling css_set_skip_task_iters() before unlinking task->cg_list from cset->tasks. This advances all active iterators to the next task on cset->tasks, so iteration continues correctly even when a task is concurrently being migrated. This race is hard to hit in practice without instrumentation, but it can be reproduced by artificially slowing down cgroup_procs_show(). For example, on an Android device a temporary /sys/kernel/cgroup/cgroup_test knob can be added to inject a delay into cgroup_procs_show(), and then: 1) Spawn three long-running tasks (PIDs 101, 102, 103). 2) Create a test cgroup and move the tasks into it. 3) Enable a large delay via /sys/kernel/cgroup/cgroup_test. 4) In one shell, read cgroup.procs from the test cgroup. 5) Within the delay window, in another shell migrate PID 102 by writing it to a different cgroup.procs file. Under this setup, cgroup.procs can intermittently show only PID 101 while skipping PID 103. Once the migration completes, reading the file again shows all tasks as expected. Note that this change does not allow removing the existing css_set_skip_task_iters() call in css_set_move_task(). The new call in cgroup_migrate_add_task() only handles iterators that are racing with migration while the task is still on cset->tasks. Iterators may also start after the task has been moved to cset->mg_tasks. If we dropped css_set_skip_task_iters() from css_set_move_task(), such iterators could keep task_pos pointing to a migrating task, causing css_task_iter_advance() to malfunction on the destination css_set, up to and including crashes or infinite loops. The race window between migration and iteration is very small, and css_task_iter is not on a hot path. In the worst case, when an iterator is positioned on the first thread of the migrating process, cgroup_migrate_add_task() may have to skip multiple tasks via css_set_skip_task_iters(). However, this only happens when migration and iteration actually race, so the performance impact is negligible compared to the correctness fix provided here.

In the Linux kernel, the following vulnerability has been resolved: mptcp: fix 'scheduling while atomic' in mptcp_pm_nl_append_new_local_addr If multiple connection requests attempt to create an implicit mptcp endpoint in parallel, more than one caller may end up in mptcp_pm_nl_append_new_local_addr because none found the address in local_addr_list during their call to mptcp_pm_nl_get_local_id. In this case, the concurrent new_local_addr calls may delete the address entry created by the previous caller. These deletes use synchronize_rcu, but this is not permitted in some of the contexts where this function may be called. During packet recv, the caller may be in a rcu read critical section and have preemption disabled. An example stack: BUG: scheduling while atomic: swapper/2/0/0x00000302 Call Trace: <IRQ> dump_stack_lvl (lib/dump_stack.c:117 (discriminator 1)) dump_stack (lib/dump_stack.c:124) __schedule_bug (kernel/sched/core.c:5943) schedule_debug.constprop.0 (arch/x86/include/asm/preempt.h:33 kernel/sched/core.c:5970) __schedule (arch/x86/include/asm/jump_label.h:27 include/linux/jump_label.h:207 kernel/sched/features.h:29 kernel/sched/core.c:6621) schedule (arch/x86/include/asm/preempt.h:84 kernel/sched/core.c:6804 kernel/sched/core.c:6818) schedule_timeout (kernel/time/timer.c:2160) wait_for_completion (kernel/sched/completion.c:96 kernel/sched/completion.c:116 kernel/sched/completion.c:127 kernel/sched/completion.c:148) __wait_rcu_gp (include/linux/rcupdate.h:311 kernel/rcu/update.c:444) synchronize_rcu (kernel/rcu/tree.c:3609) mptcp_pm_nl_append_new_local_addr (net/mptcp/pm_netlink.c:966 net/mptcp/pm_netlink.c:1061) mptcp_pm_nl_get_local_id (net/mptcp/pm_netlink.c:1164) mptcp_pm_get_local_id (net/mptcp/pm.c:420) subflow_check_req (net/mptcp/subflow.c:98 net/mptcp/subflow.c:213) subflow_v4_route_req (net/mptcp/subflow.c:305) tcp_conn_request (net/ipv4/tcp_input.c:7216) subflow_v4_conn_request (net/mptcp/subflow.c:651) tcp_rcv_state_process (net/ipv4/tcp_input.c:6709) tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1934) tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2334) ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205 (discriminator 1)) ip_local_deliver_finish (include/linux/rcupdate.h:813 net/ipv4/ip_input.c:234) ip_local_deliver (include/linux/netfilter.h:314 include/linux/netfilter.h:308 net/ipv4/ip_input.c:254) ip_sublist_rcv_finish (include/net/dst.h:461 net/ipv4/ip_input.c:580) ip_sublist_rcv (net/ipv4/ip_input.c:640) ip_list_rcv (net/ipv4/ip_input.c:675) __netif_receive_skb_list_core (net/core/dev.c:5583 net/core/dev.c:5631) netif_receive_skb_list_internal (net/core/dev.c:5685 net/core/dev.c:5774) napi_complete_done (include/linux/list.h:37 include/net/gro.h:449 include/net/gro.h:444 net/core/dev.c:6114) igb_poll (drivers/net/ethernet/intel/igb/igb_main.c:8244) igb __napi_poll (net/core/dev.c:6582) net_rx_action (net/core/dev.c:6653 net/core/dev.c:6787) handle_softirqs (kernel/softirq.c:553) __irq_exit_rcu (kernel/softirq.c:588 kernel/softirq.c:427 kernel/softirq.c:636) irq_exit_rcu (kernel/softirq.c:651) common_interrupt (arch/x86/kernel/irq.c:247 (discriminator 14)) </IRQ> This problem seems particularly prevalent if the user advertises an endpoint that has a different external vs internal address. In the case where the external address is advertised and multiple connections already exist, multiple subflow SYNs arrive in parallel which tends to trigger the race during creation of the first local_addr_list entries which have the internal address instead. Fix by skipping the replacement of an existing implicit local address if called via mptcp_pm_nl_get_local_id.

In the Linux kernel, the following vulnerability has been resolved: nfsd: Fix nsfd startup race (again) Commit bd5ae9288d64 ("nfsd: register pernet ops last, unregister first") has re-opened rpc_pipefs_event() race against nfsd_net_id registration (register_pernet_subsys()) which has been fixed by commit bb7ffbf29e76 ("nfsd: fix nsfd startup race triggering BUG_ON"). Restore the order of register_pernet_subsys() vs register_cld_notifier(). Add WARN_ON() to prevent a future regression. Crash info: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000012 CPU: 8 PID: 345 Comm: mount Not tainted 5.4.144-... #1 pc : rpc_pipefs_event+0x54/0x120 [nfsd] lr : rpc_pipefs_event+0x48/0x120 [nfsd] Call trace: rpc_pipefs_event+0x54/0x120 [nfsd] blocking_notifier_call_chain rpc_fill_super get_tree_keyed rpc_fs_get_tree vfs_get_tree do_mount ksys_mount __arm64_sys_mount el0_svc_handler el0_svc

In the Linux kernel, the following vulnerability has been resolved: PCI/PM: Drain runtime-idle callbacks before driver removal A race condition between the .runtime_idle() callback and the .remove() callback in the rtsx_pcr PCI driver leads to a kernel crash due to an unhandled page fault [1]. The problem is that rtsx_pci_runtime_idle() is not expected to be running after pm_runtime_get_sync() has been called, but the latter doesn't really guarantee that. It only guarantees that the suspend and resume callbacks will not be running when it returns. However, if a .runtime_idle() callback is already running when pm_runtime_get_sync() is called, the latter will notice that the runtime PM status of the device is RPM_ACTIVE and it will return right away without waiting for the former to complete. In fact, it cannot wait for .runtime_idle() to complete because it may be called from that callback (it arguably does not make much sense to do that, but it is not strictly prohibited). Thus in general, whoever is providing a .runtime_idle() callback needs to protect it from running in parallel with whatever code runs after pm_runtime_get_sync(). [Note that .runtime_idle() will not start after pm_runtime_get_sync() has returned, but it may continue running then if it has started earlier.] One way to address that race condition is to call pm_runtime_barrier() after pm_runtime_get_sync() (not before it, because a nonzero value of the runtime PM usage counter is necessary to prevent runtime PM callbacks from being invoked) to wait for the .runtime_idle() callback to complete should it be running at that point. A suitable place for doing that is in pci_device_remove() which calls pm_runtime_get_sync() before removing the driver, so it may as well call pm_runtime_barrier() subsequently, which will prevent the race in question from occurring, not just in the rtsx_pcr driver, but in any PCI drivers providing .runtime_idle() callbacks.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix recv-recv race of completed call If a call receives an event (such as incoming data), the call gets placed on the socket's queue and a thread in recvmsg can be awakened to go and process it. Once the thread has picked up the call off of the queue, further events will cause it to be requeued, and once the socket lock is dropped (recvmsg uses call->user_mutex to allow the socket to be used in parallel), a second thread can come in and its recvmsg can pop the call off the socket queue again. In such a case, the first thread will be receiving stuff from the call and the second thread will be blocked on call->user_mutex. The first thread can, at this point, process both the event that it picked call for and the event that the second thread picked the call for and may see the call terminate - in which case the call will be "released", decoupling the call from the user call ID assigned to it (RXRPC_USER_CALL_ID in the control message). The first thread will return okay, but then the second thread will wake up holding the user_mutex and, if it sees that the call has been released by the first thread, it will BUG thusly: kernel BUG at net/rxrpc/recvmsg.c:474! Fix this by just dequeuing the call and ignoring it if it is seen to be already released. We can't tell userspace about it anyway as the user call ID has become stale.

In the Linux kernel, the following vulnerability has been resolved: eeprom: at24: fix memory corruption race condition If the eeprom is not accessible, an nvmem device will be registered, the read will fail, and the device will be torn down. If another driver accesses the nvmem device after the teardown, it will reference invalid memory. Move the failure point before registering the nvmem device.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Disable idle reallow as part of command/gpint execution [Why] Workaroud for a race condition where DMCUB is in the process of committing to IPS1 during the handshake causing us to miss the transition into IPS2 and touch the INBOX1 RPTR causing a HW hang. [How] Disable the reallow to ensure that we have enough of a gap between entry and exit and we're not seeing back-to-back wake_and_executes.

In the Linux kernel, the following vulnerability has been resolved: io-wq: check for wq exit after adding new worker task_work We check IO_WQ_BIT_EXIT before attempting to create a new worker, and wq exit cancels pending work if we have any. But it's possible to have a race between the two, where creation checks exit finding it not set, but we're in the process of exiting. The exit side will cancel pending creation task_work, but there's a gap where we add task_work after we've canceled existing creations at exit time. Fix this by checking the EXIT bit post adding the creation task_work. If it's set, run the same cancelation that exit does.

In the Linux kernel, the following vulnerability has been resolved: userfaultfd: fix a race between writeprotect and exit_mmap() A race is possible when a process exits, its VMAs are removed by exit_mmap() and at the same time userfaultfd_writeprotect() is called. The race was detected by KASAN on a development kernel, but it appears to be possible on vanilla kernels as well. Use mmget_not_zero() to prevent the race as done in other userfaultfd operations.

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix kernel panic caused by race of smc_sock A crash occurs when smc_cdc_tx_handler() tries to access smc_sock but smc_release() has already freed it. [ 4570.695099] BUG: unable to handle page fault for address: 000000002eae9e88 [ 4570.696048] #PF: supervisor write access in kernel mode [ 4570.696728] #PF: error_code(0x0002) - not-present page [ 4570.697401] PGD 0 P4D 0 [ 4570.697716] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 4570.698228] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.16.0-rc4+ #111 [ 4570.699013] Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 8c24b4c 04/0 [ 4570.699933] RIP: 0010:_raw_spin_lock+0x1a/0x30 <...> [ 4570.711446] Call Trace: [ 4570.711746] <IRQ> [ 4570.711992] smc_cdc_tx_handler+0x41/0xc0 [ 4570.712470] smc_wr_tx_tasklet_fn+0x213/0x560 [ 4570.712981] ? smc_cdc_tx_dismisser+0x10/0x10 [ 4570.713489] tasklet_action_common.isra.17+0x66/0x140 [ 4570.714083] __do_softirq+0x123/0x2f4 [ 4570.714521] irq_exit_rcu+0xc4/0xf0 [ 4570.714934] common_interrupt+0xba/0xe0 Though smc_cdc_tx_handler() checked the existence of smc connection, smc_release() may have already dismissed and released the smc socket before smc_cdc_tx_handler() further visits it. smc_cdc_tx_handler() |smc_release() if (!conn) | | |smc_cdc_tx_dismiss_slots() | smc_cdc_tx_dismisser() | |sock_put(&smc->sk) <- last sock_put, | smc_sock freed bh_lock_sock(&smc->sk) (panic) | To make sure we won't receive any CDC messages after we free the smc_sock, add a refcount on the smc_connection for inflight CDC message(posted to the QP but haven't received related CQE), and don't release the smc_connection until all the inflight CDC messages haven been done, for both success or failed ones. Using refcount on CDC messages brings another problem: when the link is going to be destroyed, smcr_link_clear() will reset the QP, which then remove all the pending CQEs related to the QP in the CQ. To make sure all the CQEs will always come back so the refcount on the smc_connection can always reach 0, smc_ib_modify_qp_reset() was replaced by smc_ib_modify_qp_error(). And remove the timeout in smc_wr_tx_wait_no_pending_sends() since we need to wait for all pending WQEs done, or we may encounter use-after- free when handling CQEs. For IB device removal routine, we need to wait for all the QPs on that device been destroyed before we can destroy CQs on the device, or the refcount on smc_connection won't reach 0 and smc_sock cannot be released.

In the Linux kernel, the following vulnerability has been resolved: ublk: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmd ublk_cancel_cmd() calls io_uring_cmd_done() to complete uring_cmd, but we may have scheduled task work via io_uring_cmd_complete_in_task() for dispatching request, then kernel crash can be triggered. Fix it by not trying to canceling the command if ublk block request is started.

In the Linux kernel, the following vulnerability has been resolved: s390/qeth: fix deadlock during failing recovery Commit 0b9902c1fcc5 ("s390/qeth: fix deadlock during recovery") removed taking discipline_mutex inside qeth_do_reset(), fixing potential deadlocks. An error path was missed though, that still takes discipline_mutex and thus has the original deadlock potential. Intermittent deadlocks were seen when a qeth channel path is configured offline, causing a race between qeth_do_reset and ccwgroup_remove. Call qeth_set_offline() directly in the qeth_do_reset() error case and then a new variant of ccwgroup_set_offline(), without taking discipline_mutex.

In the Linux kernel, the following vulnerability has been resolved: comedi: fix race between polling and detaching syzbot reports a use-after-free in comedi in the below link, which is due to comedi gladly removing the allocated async area even though poll requests are still active on the wait_queue_head inside of it. This can cause a use-after-free when the poll entries are later triggered or removed, as the memory for the wait_queue_head has been freed. We need to check there are no tasks queued on any of the subdevices' wait queues before allowing the device to be detached by the `COMEDI_DEVCONFIG` ioctl. Tasks will read-lock `dev->attach_lock` before adding themselves to the subdevice wait queue, so fix the problem in the `COMEDI_DEVCONFIG` ioctl handler by write-locking `dev->attach_lock` before checking that all of the subdevices are safe to be deleted. This includes testing for any sleepers on the subdevices' wait queues. It remains locked until the device has been detached. This requires the `comedi_device_detach()` function to be refactored slightly, moving the bulk of it into new function `comedi_device_detach_locked()`. Note that the refactor of `comedi_device_detach()` results in `comedi_device_cancel_all()` now being called while `dev->attach_lock` is write-locked, which wasn't the case previously, but that does not matter. Thanks to Jens Axboe for diagnosing the problem and co-developing this patch.

In the Linux kernel, the following vulnerability has been resolved: media: ti: j721e-csi2rx: Fix races while restarting DMA After the frame is submitted to DMA, it may happen that the submitted list is not updated soon enough, and the DMA callback is triggered before that. This can lead to kernel crashes, so move everything in a single lock/unlock section to prevent such races.

In the Linux kernel, the following vulnerability has been resolved: udp: fix race between close() and udp_abort() Kaustubh reported and diagnosed a panic in udp_lib_lookup(). The root cause is udp_abort() racing with close(). Both racing functions acquire the socket lock, but udp{v6}_destroy_sock() release it before performing destructive actions. We can't easily extend the socket lock scope to avoid the race, instead use the SOCK_DEAD flag to prevent udp_abort from doing any action when the critical race happens. Diagnosed-and-tested-by: Kaustubh Pandey <kapandey@codeaurora.org>

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix race between searching chunks and release journal_head from buffer_head Encountered a race between ocfs2_test_bg_bit_allocatable() and jbd2_journal_put_journal_head() resulting in the below vmcore. PID: 106879 TASK: ffff880244ba9c00 CPU: 2 COMMAND: "loop3" Call trace: panic oops_end no_context __bad_area_nosemaphore bad_area_nosemaphore __do_page_fault do_page_fault page_fault [exception RIP: ocfs2_block_group_find_clear_bits+316] ocfs2_block_group_find_clear_bits [ocfs2] ocfs2_cluster_group_search [ocfs2] ocfs2_search_chain [ocfs2] ocfs2_claim_suballoc_bits [ocfs2] __ocfs2_claim_clusters [ocfs2] ocfs2_claim_clusters [ocfs2] ocfs2_local_alloc_slide_window [ocfs2] ocfs2_reserve_local_alloc_bits [ocfs2] ocfs2_reserve_clusters_with_limit [ocfs2] ocfs2_reserve_clusters [ocfs2] ocfs2_lock_refcount_allocators [ocfs2] ocfs2_make_clusters_writable [ocfs2] ocfs2_replace_cow [ocfs2] ocfs2_refcount_cow [ocfs2] ocfs2_file_write_iter [ocfs2] lo_rw_aio loop_queue_work kthread_worker_fn kthread ret_from_fork When ocfs2_test_bg_bit_allocatable() called bh2jh(bg_bh), the bg_bh->b_private NULL as jbd2_journal_put_journal_head() raced and released the jounal head from the buffer head. Needed to take bit lock for the bit 'BH_JournalHead' to fix this race.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix race in read_extent_buffer_pages() There are reports from tree-checker that detects corrupted nodes, without any obvious pattern so possibly an overwrite in memory. After some debugging it turns out there's a race when reading an extent buffer the uptodate status can be missed. To prevent concurrent reads for the same extent buffer, read_extent_buffer_pages() performs these checks: /* (1) */ if (test_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags)) return 0; /* (2) */ if (test_and_set_bit(EXTENT_BUFFER_READING, &eb->bflags)) goto done; At this point, it seems safe to start the actual read operation. Once that completes, end_bbio_meta_read() does /* (3) */ set_extent_buffer_uptodate(eb); /* (4) */ clear_bit(EXTENT_BUFFER_READING, &eb->bflags); Normally, this is enough to ensure only one read happens, and all other callers wait for it to finish before returning. Unfortunately, there is a racey interleaving: Thread A | Thread B | Thread C ---------+----------+--------- (1) | | | (1) | (2) | | (3) | | (4) | | | (2) | | | (1) When this happens, thread B kicks of an unnecessary read. Worse, thread C will see UPTODATE set and return immediately, while the read from thread B is still in progress. This race could result in tree-checker errors like this as the extent buffer is concurrently modified: BTRFS critical (device dm-0): corrupted node, root=256 block=8550954455682405139 owner mismatch, have 11858205567642294356 expect [256, 18446744073709551360] Fix it by testing UPTODATE again after setting the READING bit, and if it's been set, skip the unnecessary read. [ minor update of changelog ]

In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: eDMA: Add sync read before starting the DMA transfer in remote setup The Linked list element and pointer are not stored in the same memory as the eDMA controller register. If the doorbell register is toggled before the full write of the linked list a race condition error will occur. In remote setup we can only use a readl to the memory to assure the full write has occurred.

In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix garbage collector racing against connect() Garbage collector does not take into account the risk of embryo getting enqueued during the garbage collection. If such embryo has a peer that carries SCM_RIGHTS, two consecutive passes of scan_children() may see a different set of children. Leading to an incorrectly elevated inflight count, and then a dangling pointer within the gc_inflight_list. sockets are AF_UNIX/SOCK_STREAM S is an unconnected socket L is a listening in-flight socket bound to addr, not in fdtable V's fd will be passed via sendmsg(), gets inflight count bumped connect(S, addr) sendmsg(S, [V]); close(V) __unix_gc() ---------------- ------------------------- ----------- NS = unix_create1() skb1 = sock_wmalloc(NS) L = unix_find_other(addr) unix_state_lock(L) unix_peer(S) = NS // V count=1 inflight=0 NS = unix_peer(S) skb2 = sock_alloc() skb_queue_tail(NS, skb2[V]) // V became in-flight // V count=2 inflight=1 close(V) // V count=1 inflight=1 // GC candidate condition met for u in gc_inflight_list: if (total_refs == inflight_refs) add u to gc_candidates // gc_candidates={L, V} for u in gc_candidates: scan_children(u, dec_inflight) // embryo (skb1) was not // reachable from L yet, so V's // inflight remains unchanged __skb_queue_tail(L, skb1) unix_state_unlock(L) for u in gc_candidates: if (u.inflight) scan_children(u, inc_inflight_move_tail) // V count=1 inflight=2 (!) If there is a GC-candidate listening socket, lock/unlock its state. This makes GC wait until the end of any ongoing connect() to that socket. After flipping the lock, a possibly SCM-laden embryo is already enqueued. And if there is another embryo coming, it can not possibly carry SCM_RIGHTS. At this point, unix_inflight() can not happen because unix_gc_lock is already taken. Inflight graph remains unaffected.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to truncate meta inode pages forcely Below race case can cause data corruption: Thread A GC thread - gc_data_segment - ra_data_block - locked meta_inode page - f2fs_inplace_write_data - invalidate_mapping_pages : fail to invalidate meta_inode page due to lock failure or dirty|writeback status - f2fs_submit_page_bio : write last dirty data to old blkaddr - move_data_block - load old data from meta_inode page - f2fs_submit_page_write : write old data to new blkaddr Because invalidate_mapping_pages() will skip invalidating page which has unclear status including locked, dirty, writeback and so on, so we need to use truncate_inode_pages_range() instead of invalidate_mapping_pages() to make sure meta_inode page will be dropped.

In the Linux kernel, the following vulnerability has been resolved: tls: fix race between tx work scheduling and socket close Similarly to previous commit, the submitting thread (recvmsg/sendmsg) may exit as soon as the async crypto handler calls complete(). Reorder scheduling the work before calling complete(). This seems more logical in the first place, as it's the inverse order of what the submitting thread will do.

In the Linux kernel, the following vulnerability has been resolved: hv_netvsc: Fix race condition between netvsc_probe and netvsc_remove In commit ac5047671758 ("hv_netvsc: Disable NAPI before closing the VMBus channel"), napi_disable was getting called for all channels, including all subchannels without confirming if they are enabled or not. This caused hv_netvsc getting hung at napi_disable, when netvsc_probe() has finished running but nvdev->subchan_work has not started yet. netvsc_subchan_work() -> rndis_set_subchannel() has not created the sub-channels and because of that netvsc_sc_open() is not running. netvsc_remove() calls cancel_work_sync(&nvdev->subchan_work), for which netvsc_subchan_work did not run. netif_napi_add() sets the bit NAPI_STATE_SCHED because it ensures NAPI cannot be scheduled. Then netvsc_sc_open() -> napi_enable will clear the NAPIF_STATE_SCHED bit, so it can be scheduled. napi_disable() does the opposite. Now during netvsc_device_remove(), when napi_disable is called for those subchannels, napi_disable gets stuck on infinite msleep. This fix addresses this problem by ensuring that napi_disable() is not getting called for non-enabled NAPI struct. But netif_napi_del() is still necessary for these non-enabled NAPI struct for cleanup purpose. Call trace: [ 654.559417] task:modprobe state:D stack: 0 pid: 2321 ppid: 1091 flags:0x00004002 [ 654.568030] Call Trace: [ 654.571221] <TASK> [ 654.573790] __schedule+0x2d6/0x960 [ 654.577733] schedule+0x69/0xf0 [ 654.581214] schedule_timeout+0x87/0x140 [ 654.585463] ? __bpf_trace_tick_stop+0x20/0x20 [ 654.590291] msleep+0x2d/0x40 [ 654.593625] napi_disable+0x2b/0x80 [ 654.597437] netvsc_device_remove+0x8a/0x1f0 [hv_netvsc] [ 654.603935] rndis_filter_device_remove+0x194/0x1c0 [hv_netvsc] [ 654.611101] ? do_wait_intr+0xb0/0xb0 [ 654.615753] netvsc_remove+0x7c/0x120 [hv_netvsc] [ 654.621675] vmbus_remove+0x27/0x40 [hv_vmbus]

In the Linux kernel, the following vulnerability has been resolved: quota: Fix potential NULL pointer dereference Below race may cause NULL pointer dereference P1 P2 dquot_free_inode quota_off drop_dquot_ref remove_dquot_ref dquots = i_dquot(inode) dquots = i_dquot(inode) srcu_read_lock dquots[cnt]) != NULL (1) dquots[type] = NULL (2) spin_lock(&dquots[cnt]->dq_dqb_lock) (3) .... If dquot_free_inode(or other routines) checks inode's quota pointers (1) before quota_off sets it to NULL(2) and use it (3) after that, NULL pointer dereference will be triggered. So let's fix it by using a temporary pointer to avoid this issue.

In the Linux kernel, the following vulnerability has been resolved: nvme-pci: fix race condition between reset and nvme_dev_disable() nvme_dev_disable() modifies the dev->online_queues field, therefore nvme_pci_update_nr_queues() should avoid racing against it, otherwise we could end up passing invalid values to blk_mq_update_nr_hw_queues(). WARNING: CPU: 39 PID: 61303 at drivers/pci/msi/api.c:347 pci_irq_get_affinity+0x187/0x210 Workqueue: nvme-reset-wq nvme_reset_work [nvme] RIP: 0010:pci_irq_get_affinity+0x187/0x210 Call Trace: <TASK> ? blk_mq_pci_map_queues+0x87/0x3c0 ? pci_irq_get_affinity+0x187/0x210 blk_mq_pci_map_queues+0x87/0x3c0 nvme_pci_map_queues+0x189/0x460 [nvme] blk_mq_update_nr_hw_queues+0x2a/0x40 nvme_reset_work+0x1be/0x2a0 [nvme] Fix the bug by locking the shutdown_lock mutex before using dev->online_queues. Give up if nvme_dev_disable() is running or if it has been executed already.

A race condition was found in the Linux kernel's sound/hda device driver in snd_hdac_regmap_sync() function. This can result in a null pointer dereference issue, possibly leading to a kernel panic or denial of service issue.

A race condition was found in the Linux kernel's drm/exynos device driver in exynos_drm_crtc_atomic_disable() function. This can result in a null pointer dereference issue, possibly leading to a kernel panic or denial of service issue.

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix race between cache write completion and ALL_QUEUED being set When netfslib is issuing subrequests, the subrequests start processing immediately and may complete before we reach the end of the issuing function. At the end of the issuing function we set NETFS_RREQ_ALL_QUEUED to indicate to the collector that we aren't going to issue any more subreqs and that it can do the final notifications and cleanup. Now, this isn't a problem if the request is synchronous (NETFS_RREQ_OFFLOAD_COLLECTION is unset) as the result collection will be done in-thread and we're guaranteed an opportunity to run the collector. However, if the request is asynchronous, collection is primarily triggered by the termination of subrequests queuing it on a workqueue. Now, a race can occur here if the app thread sets ALL_QUEUED after the last subrequest terminates. This can happen most easily with the copy2cache code (as used by Ceph) where, in the collection routine of a read request, an asynchronous write request is spawned to copy data to the cache. Folios are added to the write request as they're unlocked, but there may be a delay before ALL_QUEUED is set as the write subrequests may complete before we get there. If all the write subreqs have finished by the ALL_QUEUED point, no further events happen and the collection never happens, leaving the request hanging. Fix this by queuing the collector after setting ALL_QUEUED. This is a bit heavy-handed and it may be sufficient to do it only if there are no extant subreqs. Also add a tracepoint to cross-reference both requests in a copy-to-request operation and add a trace to the netfs_rreq tracepoint to indicate the setting of ALL_QUEUED.

A use-after-free vulnerability was found in network namespaces code affecting the Linux kernel before 4.14.11. The function get_net_ns_by_id() in net/core/net_namespace.c does not check for the net::count value after it has found a peer network in netns_ids idr, which could lead to double free and memory corruption. This vulnerability could allow an unprivileged local user to induce kernel memory corruption on the system, leading to a crash. Due to the nature of the flaw, privilege escalation cannot be fully ruled out, although it is thought to be unlikely.

In the Linux kernel, the following vulnerability has been resolved: fsnotify: clear PARENT_WATCHED flags lazily In some setups directories can have many (usually negative) dentries. Hence __fsnotify_update_child_dentry_flags() function can take a significant amount of time. Since the bulk of this function happens under inode->i_lock this causes a significant contention on the lock when we remove the watch from the directory as the __fsnotify_update_child_dentry_flags() call from fsnotify_recalc_mask() races with __fsnotify_update_child_dentry_flags() calls from __fsnotify_parent() happening on children. This can lead upto softlockup reports reported by users. Fix the problem by calling fsnotify_update_children_dentry_flags() to set PARENT_WATCHED flags only when parent starts watching children. When parent stops watching children, clear false positive PARENT_WATCHED flags lazily in __fsnotify_parent() for each accessed child.

In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix race condition when gathering fdinfo group samples Commit e16635d88fa0 ("drm/panthor: add DRM fdinfo support") failed to protect access to groups with an xarray lock, which could lead to use-after-free errors.

In the Linux kernel, the following vulnerability has been resolved: mm: userfaultfd: fix race of userfaultfd_move and swap cache This commit fixes two kinds of races, they may have different results: Barry reported a BUG_ON in commit c50f8e6053b0, we may see the same BUG_ON if the filemap lookup returned NULL and folio is added to swap cache after that. If another kind of race is triggered (folio changed after lookup) we may see RSS counter is corrupted: [ 406.893936] BUG: Bad rss-counter state mm:ffff0000c5a9ddc0 type:MM_ANONPAGES val:-1 [ 406.894071] BUG: Bad rss-counter state mm:ffff0000c5a9ddc0 type:MM_SHMEMPAGES val:1 Because the folio is being accounted to the wrong VMA. I'm not sure if there will be any data corruption though, seems no. The issues above are critical already. On seeing a swap entry PTE, userfaultfd_move does a lockless swap cache lookup, and tries to move the found folio to the faulting vma. Currently, it relies on checking the PTE value to ensure that the moved folio still belongs to the src swap entry and that no new folio has been added to the swap cache, which turns out to be unreliable. While working and reviewing the swap table series with Barry, following existing races are observed and reproduced [1]: In the example below, move_pages_pte is moving src_pte to dst_pte, where src_pte is a swap entry PTE holding swap entry S1, and S1 is not in the swap cache: CPU1 CPU2 userfaultfd_move move_pages_pte() entry = pte_to_swp_entry(orig_src_pte); // Here it got entry = S1 ... < interrupted> ... <swapin src_pte, alloc and use folio A> // folio A is a new allocated folio // and get installed into src_pte <frees swap entry S1> // src_pte now points to folio A, S1 // has swap count == 0, it can be freed // by folio_swap_swap or swap // allocator's reclaim. <try to swap out another folio B> // folio B is a folio in another VMA. <put folio B to swap cache using S1 > // S1 is freed, folio B can use it // for swap out with no problem. ... folio = filemap_get_folio(S1) // Got folio B here !!! ... < interrupted again> ... <swapin folio B and free S1> // Now S1 is free to be used again. <swapout src_pte & folio A using S1> // Now src_pte is a swap entry PTE // holding S1 again. folio_trylock(folio) move_swap_pte double_pt_lock is_pte_pages_stable // Check passed because src_pte == S1 folio_move_anon_rmap(...) // Moved invalid folio B here !!! The race window is very short and requires multiple collisions of multiple rare events, so it's very unlikely to happen, but with a deliberately constructed reproducer and increased time window, it can be reproduced easily. This can be fixed by checking if the folio returned by filemap is the valid swap cache folio after acquiring the folio lock. Another similar race is possible: filemap_get_folio may return NULL, but folio (A) could be swapped in and then swapped out again using the same swap entry after the lookup. In such a case, folio (A) may remain in the swap cache, so it must be moved too: CPU1 CPU2 userfaultfd_move move_pages_pte() entry = pte_to_swp_entry(orig_src_pte); // Here it got entry = S1, and S1 is not in swap cache folio = filemap_get ---truncated---

In the Linux kernel, the following vulnerability has been resolved: mm/smaps: fix race between smaps_hugetlb_range and migration smaps_hugetlb_range() handles the pte without holdling ptl, and may be concurrenct with migration, leaing to BUG_ON in pfn_swap_entry_to_page(). The race is as follows. smaps_hugetlb_range migrate_pages huge_ptep_get remove_migration_ptes folio_unlock pfn_swap_entry_folio BUG_ON To fix it, hold ptl lock in smaps_hugetlb_range().

In the Linux kernel, the following vulnerability has been resolved: sched/fair: Fix fault in reweight_entity Syzbot found a GPF in reweight_entity. This has been bisected to commit 4ef0c5c6b5ba ("kernel/sched: Fix sched_fork() access an invalid sched_task_group") There is a race between sched_post_fork() and setpriority(PRIO_PGRP) within a thread group that causes a null-ptr-deref in reweight_entity() in CFS. The scenario is that the main process spawns number of new threads, which then call setpriority(PRIO_PGRP, 0, -20), wait, and exit. For each of the new threads the copy_process() gets invoked, which adds the new task_struct and calls sched_post_fork() for it. In the above scenario there is a possibility that setpriority(PRIO_PGRP) and set_one_prio() will be called for a thread in the group that is just being created by copy_process(), and for which the sched_post_fork() has not been executed yet. This will trigger a null pointer dereference in reweight_entity(), as it will try to access the run queue pointer, which hasn't been set. Before the mentioned change the cfs_rq pointer for the task has been set in sched_fork(), which is called much earlier in copy_process(), before the new task is added to the thread_group. Now it is done in the sched_post_fork(), which is called after that. To fix the issue the remove the update_load param from the update_load param() function and call reweight_task() only if the task flag doesn't have the TASK_NEW flag set.

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix potential warning in trace_printk_seq during ftrace_dump When calling ftrace_dump_one() concurrently with reading trace_pipe, a WARN_ON_ONCE() in trace_printk_seq() can be triggered due to a race condition. The issue occurs because: CPU0 (ftrace_dump) CPU1 (reader) echo z > /proc/sysrq-trigger !trace_empty(&iter) trace_iterator_reset(&iter) <- len = size = 0 cat /sys/kernel/tracing/trace_pipe trace_find_next_entry_inc(&iter) __find_next_entry ring_buffer_empty_cpu <- all empty return NULL trace_printk_seq(&iter.seq) WARN_ON_ONCE(s->seq.len >= s->seq.size) In the context between trace_empty() and trace_find_next_entry_inc() during ftrace_dump, the ring buffer data was consumed by other readers. This caused trace_find_next_entry_inc to return NULL, failing to populate `iter.seq`. At this point, due to the prior trace_iterator_reset, both `iter.seq.len` and `iter.seq.size` were set to 0. Since they are equal, the WARN_ON_ONCE condition is triggered. Move the trace_printk_seq() into the if block that checks to make sure the return value of trace_find_next_entry_inc() is non-NULL in ftrace_dump_one(), ensuring the 'iter.seq' is properly populated before subsequent operations.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: Fix race condition in RPC handle list access The 'sess->rpc_handle_list' XArray manages RPC handles within a ksmbd session. Access to this list is intended to be protected by 'sess->rpc_lock' (an rw_semaphore). However, the locking implementation was flawed, leading to potential race conditions. In ksmbd_session_rpc_open(), the code incorrectly acquired only a read lock before calling xa_store() and xa_erase(). Since these operations modify the XArray structure, a write lock is required to ensure exclusive access and prevent data corruption from concurrent modifications. Furthermore, ksmbd_session_rpc_method() accessed the list using xa_load() without holding any lock at all. This could lead to reading inconsistent data or a potential use-after-free if an entry is concurrently removed and the pointer is dereferenced. Fix these issues by: 1. Using down_write() and up_write() in ksmbd_session_rpc_open() to ensure exclusive access during XArray modification, and ensuring the lock is correctly released on error paths. 2. Adding down_read() and up_read() in ksmbd_session_rpc_method() to safely protect the lookup.

In the Linux kernel, the following vulnerability has been resolved: s390/ism: fix concurrency management in ism_cmd() The s390x ISM device data sheet clearly states that only one request-response sequence is allowable per ISM function at any point in time. Unfortunately as of today the s390/ism driver in Linux does not honor that requirement. This patch aims to rectify that. This problem was discovered based on Aliaksei's bug report which states that for certain workloads the ISM functions end up entering error state (with PEC 2 as seen from the logs) after a while and as a consequence connections handled by the respective function break, and for future connection requests the ISM device is not considered -- given it is in a dysfunctional state. During further debugging PEC 3A was observed as well. A kernel message like [ 1211.244319] zpci: 061a:00:00.0: Event 0x2 reports an error for PCI function 0x61a is a reliable indicator of the stated function entering error state with PEC 2. Let me also point out that a kernel message like [ 1211.244325] zpci: 061a:00:00.0: The ism driver bound to the device does not support error recovery is a reliable indicator that the ISM function won't be auto-recovered because the ISM driver currently lacks support for it. On a technical level, without this synchronization, commands (inputs to the FW) may be partially or fully overwritten (corrupted) by another CPU trying to issue commands on the same function. There is hard evidence that this can lead to DMB token values being used as DMB IOVAs, leading to PEC 2 PCI events indicating invalid DMA. But this is only one of the failure modes imaginable. In theory even completely losing one command and executing another one twice and then trying to interpret the outputs as if the command we intended to execute was actually executed and not the other one is also possible. Frankly, I don't feel confident about providing an exhaustive list of possible consequences.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix race with concurrent opens in rename(2) Besides sending the rename request to the server, the rename process also involves closing any deferred close, waiting for outstanding I/O to complete as well as marking all existing open handles as deleted to prevent them from deferring closes, which increases the race window for potential concurrent opens on the target file. Fix this by unhashing the dentry in advance to prevent any concurrent opens on the target.

In the Linux kernel, the following vulnerability has been resolved: NFS: Fix a race when updating an existing write After nfs_lock_and_join_requests() tests for whether the request is still attached to the mapping, nothing prevents a call to nfs_inode_remove_request() from succeeding until we actually lock the page group. The reason is that whoever called nfs_inode_remove_request() doesn't necessarily have a lock on the page group head. So in order to avoid races, let's take the page group lock earlier in nfs_lock_and_join_requests(), and hold it across the removal of the request in nfs_inode_remove_request().

In the Linux kernel, the following vulnerability has been resolved: zram: fix slot write race condition Parallel concurrent writes to the same zram index result in leaked zsmalloc handles. Schematically we can have something like this: CPU0 CPU1 zram_slot_lock() zs_free(handle) zram_slot_lock() zram_slot_lock() zs_free(handle) zram_slot_lock() compress compress handle = zs_malloc() handle = zs_malloc() zram_slot_lock zram_set_handle(handle) zram_slot_lock zram_slot_lock zram_set_handle(handle) zram_slot_lock Either CPU0 or CPU1 zsmalloc handle will leak because zs_free() is done too early. In fact, we need to reset zram entry right before we set its new handle, all under the same slot lock scope.

In the Linux kernel, the following vulnerability has been resolved: virtio_ring: Fix data race by tagging event_triggered as racy for KCSAN syzbot reports a data-race when accessing the event_triggered, here is the simplified stack when the issue occurred: ================================================================== BUG: KCSAN: data-race in virtqueue_disable_cb / virtqueue_enable_cb_delayed write to 0xffff8881025bc452 of 1 bytes by task 3288 on cpu 0: virtqueue_enable_cb_delayed+0x42/0x3c0 drivers/virtio/virtio_ring.c:2653 start_xmit+0x230/0x1310 drivers/net/virtio_net.c:3264 __netdev_start_xmit include/linux/netdevice.h:5151 [inline] netdev_start_xmit include/linux/netdevice.h:5160 [inline] xmit_one net/core/dev.c:3800 [inline] read to 0xffff8881025bc452 of 1 bytes by interrupt on cpu 1: virtqueue_disable_cb_split drivers/virtio/virtio_ring.c:880 [inline] virtqueue_disable_cb+0x92/0x180 drivers/virtio/virtio_ring.c:2566 skb_xmit_done+0x5f/0x140 drivers/net/virtio_net.c:777 vring_interrupt+0x161/0x190 drivers/virtio/virtio_ring.c:2715 __handle_irq_event_percpu+0x95/0x490 kernel/irq/handle.c:158 handle_irq_event_percpu kernel/irq/handle.c:193 [inline] value changed: 0x01 -> 0x00 ================================================================== When the data race occurs, the function virtqueue_enable_cb_delayed() sets event_triggered to false, and virtqueue_disable_cb_split/packed() reads it as false due to the race condition. Since event_triggered is an unreliable hint used for optimization, this should only cause the driver temporarily suggest that the device not send an interrupt notification when the event index is used. Fix this KCSAN reported data-race issue by explicitly tagging the access as data_racy.