IBM Spectrum Protect Plus 10.1.0 and 10.1.5 could allow a remote attacker to execute arbitrary code on the system. By using a specially crafted HTTP command, an attacker could exploit this vulnerability to execute arbitrary command on the system. IBM X-Force ID: 175091.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in D-Link DAR-7000-40 V31R02B1413C and classified as critical. This issue affects some unknown processing of the file /useratte/resmanage.php. The manipulation of the argument load leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-264533 was assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

Hoverfly is an open source API simulation tool. In versions 1.11.3 and prior, the middleware functionality in Hoverfly is vulnerable to command injection vulnerability at `/api/v2/hoverfly/middleware` endpoint due to insufficient validation and sanitization in user input. The vulnerability exists in the middleware management API endpoint `/api/v2/hoverfly/middleware`. This issue is born due to combination of three code level flaws: Insufficient Input Validation in middleware.go line 94-96; Unsafe Command Execution in local_middleware.go line 14-19; and Immediate Execution During Testing in hoverfly_service.go line 173. This allows an attacker to gain remote code execution (RCE) on any system running the vulnerable Hoverfly service. Since the input is directly passed to system commands without proper checks, an attacker can upload a malicious payload or directly execute arbitrary commands (including reverse shells) on the host server with the privileges of the Hoverfly process. Commit 17e60a9bc78826deb4b782dca1c1abd3dbe60d40 in version 1.12.0 disables the set middleware API by default, and subsequent changes to documentation make users aware of the security changes of exposing the set middleware API.

IBM Spectrum Protect Plus 10.1.0 and 10.1.5 could allow a remote attacker to execute arbitrary code on the system. By using a specially crafted HTTP command, an attacker could exploit this vulnerability to execute arbitrary command on the system. IBM X-Force ID: 175022.

IBM Spectrum Protect Plus 10.1.0 and 10.1.5 could allow a remote attacker to execute arbitrary code on the system. By using a specially crafted HTTP command, an attacker could exploit this vulnerability to execute arbitrary command on the system. IBM X-Force ID: 175020.

IBM Spectrum Protect Plus 10.1.0 through 10.1.5 could allow a remote attacker to execute arbitrary code on the system. By using a specially crafted HTTP command, an attacker could exploit this vulnerability to execute arbitrary command on the system. This vulnerability is due to an incomplete fix for CVE-2020-4211. IBM X-Force ID: 181724.

A vulnerability was found in ONS Digital RAS Collection Instrument up to 2.0.27 and classified as critical. Affected by this issue is the function jobs of the file .github/workflows/comment.yml. The manipulation of the argument $COMMENT_BODY leads to os command injection. Upgrading to version 2.0.28 is able to address this issue. The name of the patch is dcaad2540f7d50c512ff2e031d3778dd9337db2b. It is recommended to upgrade the affected component. The identifier of this vulnerability is VDB-234248.

oal_ipt_addBridgeIsolationRules on TP-Link TL-WR840N 6_EU_0.9.1_4.16 devices allows OS command injection because a raw string entered from the web interface (an IP address field) is used directly for a call to the system library function (for iptables). NOTE: oal_ipt_addBridgeIsolationRules is not the only function that calls util_execSystem.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001 and classified as critical. Affected by this issue is the function RP_checkFWByBBS of the file /goform/RP_checkFWByBBS. The manipulation of the argument type/ch/ssidhex/security/extch/pwd/mode/ip/nm/gw leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001 and classified as critical. Affected by this vulnerability is the function RP_UpgradeFWByBBS of the file /goform/RP_UpgradeFWByBBS. The manipulation of the argument type/ch/ssidhex/security/extch/pwd/mode/ip/nm/gw leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

TOTOLINK NR1800X V9.1.0u.6279_B20210910 contains a command injection via the FileName parameter in the UploadFirmwareFile function.

Pinger 1.0 contains a remote code execution vulnerability that allows attackers to inject shell commands through the ping and socket parameters. Attackers can exploit the unsanitized input in ping.php to write arbitrary PHP files and execute system commands by appending shell metacharacters.

An issue was discovered in the singleCrunch function in shenzhim aaptjs 1.3.1, allows attackers to execute arbitrary code via the filePath parameters.

TinyCheck before commits 9fd360d and ea53de8 was vulnerable to command injection due to insufficient checks of input parameters in several places.

An issue was discovered in the crunch function in shenzhim aaptjs 1.3.1, allows attackers to execute arbitrary code via the filePath parameters.

Ajenti 2.1.36 contains an authentication bypass vulnerability that allows remote attackers to execute arbitrary commands after successful login. Attackers can leverage the /api/terminal/create endpoint to send a netcat reverse shell payload targeting a specified IP and port.

Sickbeard alpha contains a remote command injection vulnerability that allows unauthenticated attackers to execute arbitrary commands through the extra scripts configuration. Attackers can set malicious commands in the extra scripts field and trigger processing to execute remote code on the vulnerable Sickbeard installation.

A vulnerability has been found in Teledyne FLIR AX8 up to 1.46.16. Affected by this issue is some unknown functionality of the file palette.php of the component Web Service Handler. The manipulation of the argument palette leads to command injection. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.49.16 can resolve this issue. Upgrading the affected component is advised. The vendor points out: "FLIR AX8 internal web site has been refactored to be able to handle the reported vulnerabilities."

Edimax EW-7438RPn-v3 Mini 1.27 contains a remote code execution vulnerability that allows unauthenticated attackers to execute arbitrary commands through the /goform/mp endpoint. Attackers can exploit the vulnerability by sending crafted POST requests with command injection payloads to download and execute malicious scripts on the device.

Tea LaTex 1.0 contains a remote code execution vulnerability that allows unauthenticated attackers to execute arbitrary shell commands through the /api.php endpoint. Attackers can craft a malicious LaTeX payload with shell commands that are executed when processed by the application's tex2png API action.

A vulnerability, which was classified as critical, was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Affected is the function wirelessAdvancedHidden of the file /goform/wirelessAdvancedHidden. The manipulation of the argument ExtChSelector/24GSelector/5GSelector leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

LUCY Security Awareness Software through 4.7.x allows unauthenticated remote code execution because the Migration Tool (in the Support section) allows upload of .php files within a system.tar.gz file. The .php file becomes accessible with a public/system/static URI.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. It has been declared as critical. This vulnerability affects the function ssid1MACFilter of the file /goform/ssid1MACFilter. The manipulation of the argument apselect_%d/newap_text_%d leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

TOTOlink A7100RU V7.4cu.2313_B20191024 was discovered to contain a command injection vulnerability via the port parameter in the setting/setOpenVpnClientCfg function.

The package Snyk CLI before 1.1294.0 is vulnerable to Code Injection when scanning an untrusted PHP project. The vulnerability can be triggered if Snyk test is run inside the untrusted project due to the improper handling of the current working directory name. Snyk recommends only scanning trusted projects.

Cherry Studio is a desktop client that supports for multiple LLM providers. From versions 1.2.5 to 1.5.1, Cherry Studio is vulnerable to OS Command Injection during a connection with a malicious MCP server in HTTP Streamable mode. Attackers can setup a malicious MCP server with compatible OAuth authorization server endpoints and trick victims into connecting it, leading to OS command injection in vulnerable clients. This issue has been patched in version 1.5.2.

A vulnerability in Trend Micro Apex One (on-premise) management console could allow a pre-authenticated remote attacker to upload malicious code and execute commands on affected installations.

An unauthenticated command-execution vulnerability exists in TerraMaster TOS through 4.2.06 via shell metacharacters in the Event parameter in include/makecvs.php during CSV creation.

An issue was discovered in ClusterLabs Hawk 2.x through 2.3.0-x. There is a Ruby shell code injection issue via the hawk_remember_me_id parameter in the login_from_cookie cookie. The user logout routine could be used by unauthenticated remote attackers to execute code as hauser.

A remote code execution vulnerability in the installUpdateThemePluginAction function in index.php in WonderCMS 3.1.3, allows remote attackers to upload a custom plugin which can contain arbitrary code and obtain a webshell via the theme/plugin installer.

HGiga MailSherlock does not validate specific parameters properly. Attackers can use the vulnerability to launch Command inject attacks remotely and execute arbitrary commands of the system.

KLog Server 2.4.1 allows OS command injection via shell metacharacters in the actions/authenticate.php user parameter.

Belkin LINKSYS RE6500 devices before 1.0.012.001 allow remote attackers to execute arbitrary commands or set a new password via shell metacharacters to the goform/setSysAdm page.

A vulnerability in the web-based management interface of Cisco DNA Spaces Connector could allow an unauthenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insufficient validation of user-supplied input in the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on the underling operating system with privileges of the web-based management application, which is running as a restricted user. This could result in changes being made to pages served by the web-based management application impacting the integrity or availability of the web-based management application.

tdpServer on TP-Link Archer A7 AC1750 devices before 201029 allows remote attackers to execute arbitrary code via the slave_mac parameter. NOTE: this issue exists because of an incomplete fix for CVE-2020-10882 in which shell quotes are mishandled.

The package async-git before 1.13.2 are vulnerable to Command Injection via shell meta-characters (back-ticks). For example: git.reset('atouch HACKEDb')

An issue was discovered in URVE Build 24.03.2020. By using the _internal/pc/vpro.php?mac=0&ip=0&operation=0&usr=0&pass=0%3bpowershell+-c+" substring, it is possible to execute a Powershell command and redirect its output to a file under the web root.

This affects all versions of package corenlp-js-prefab. The injection point is located in line 10 in 'index.js.' It depends on a vulnerable package 'corenlp-js-interface.' Vulnerability can be exploited with the following PoC:

Zeroshell 3.9.3 contains a command injection vulnerability in the /cgi-bin/kerbynet StartSessionSubmit parameter that could allow an unauthenticated attacker to execute a system command by using shell metacharacters and the %0a character.

Ubilling v1.0.9 allows Remote Command Execution as Root user by executing a malicious command that is injected inside the config file and being triggered by another part of the software.

This affects all versions of package s3-kilatstorage.

osCommerce Phoenix CE before 1.0.5.4 allows OS command injection remotely. Within admin/mail.php, a from POST parameter can be passed to the application. This affects the PHP mail function, and the sendmail -f option.

An issue was discovered on CDATA 72408A, 9008A, 9016A, 92408A, 92416A, 9288, 97016, 97024P, 97028P, 97042P, 97084P, 97168P, FD1002S, FD1104, FD1104B, FD1104S, FD1104SN, FD1108S, FD1204S-R2, FD1204SN, FD1204SN-R2, FD1208S-R2, FD1216S-R1, FD1608GS, FD1608SN, FD1616GS, FD1616SN, and FD8000 devices. One can escape from a shell and acquire root privileges by leveraging the TFTP download configuration.

An issue was discovered on V-SOL V1600D V2.03.69 and V2.03.57, V1600D4L V1.01.49, V1600D-MINI V1.01.48, V1600G1 V2.0.7 and V1.9.7, and V1600G2 V1.1.4 OLT devices. Command injection can occur in "upload tftp syslog" and "upload tftp configuration" in the CLI via a crafted filename.

Yachtcontrol through 2019-10-06: It's possible to perform direct Operating System commands as an unauthenticated user via the "/pages/systemcall.php?command={COMMAND}" page and parameter, where {COMMAND} will be executed and returning the results to the client. Affects Yachtcontrol webservers disclosed via Dutch GPRS/4G mobile IP-ranges. IP addresses vary due to DHCP client leasing of telco's.

All versions of package corenlp-js-interface are vulnerable to Command Injection via the main function.

An issue was discovered in the add function in Shenzhim AAPTJS 1.3.1 which allows attackers to execute arbitrary code via the filePath parameter.

An exploitable unatuhenticated command injection exists in the OpenClinic GA 5.173.3. Specially crafted web requests can cause commands to be executed on the server. An attacker can send a web request with parameters containing specific parameter to trigger this vulnerability, potentially allowing exfiltration of the database, user credentials and compromise underlying operating system.

An issue was discovered on Western Digital My Cloud NAS devices before 5.04.114. They allow remote code execution with resultant escalation of privileges.

Addressed remote code execution vulnerability in DsdkProxy.php due to insufficient sanitization and insufficient validation of user input in Western Digital My Cloud NAS devices prior to 5.04.114