WebSocket endpoints lack proper authentication mechanisms, enabling attackers to perform unauthorized station impersonation and manipulate data sent to the backend. An unauthenticated attacker can connect to the OCPP WebSocket endpoint using a known or discovered charging station identifier, then issue or receive OCPP commands as a legitimate charger. Given that no authentication is required, this can lead to privilege escalation, unauthorized control of charging infrastructure, and corruption of charging network data reported to the backend.

The WebSocket backend uses charging station identifiers to uniquely associate sessions but allows multiple endpoints to connect using the same session identifier. This implementation results in predictable session identifiers and enables session hijacking or shadowing, where the most recent connection displaces the legitimate charging station and receives backend commands intended for that station. This vulnerability may allow unauthorized users to authenticate as other users or enable a malicious actor to cause a denial-of-service condition by overwhelming the backend with valid session requests.

Missing Rate Limiting in Web Applications operating on Business-DNA Solutions GmbH’s TopEase® Platform Version <= 7.1.27 on the Login Form allows an unauthenticated remote attacker to perform multiple login attempts, which facilitates gaining privileges.

DoraCMS v2.1.8 was discovered to re-use the same code for verification of valid usernames and passwords. This vulnerability allows attackers to gain access to the application via a bruteforce attack.

kodbox 1.46.01 has a security flaw that enables user enumeration. This problem is present on the login page, where an attacker can identify valid users based on varying response messages, potentially paving the way for a brute force attack.

The cookie session ID is of insufficient length and can be exploited by brute force, which may allow a remote attacker to obtain a valid session, bypass authentication, and manipulate the transmitter.

A brute-force protection bypass in CAPTCHA protection in ASUS ROG Rapture GT-AX11000, RT-AX3000, RT-AX55, RT-AX56U, RT-AX56U_V2, RT-AX58U, RT-AX82U, RT-AX82U GUNDAM EDITION, RT-AX86 Series(RT-AX86U/RT-AX86S), RT-AX86U ZAKU II EDITION, RT-AX88U, RT-AX92U, TUF Gaming AX3000, TUF Gaming AX5400 (TUF-AX5400), ASUS ZenWiFi XD6, ASUS ZenWiFi AX (XT8) before 3.0.0.4.386.45898, and RT-AX68U before 3.0.0.4.386.45911, allows a remote attacker to attempt any number of login attempts via sending a specific HTTP request.

JumpServer is an open source bastion host. When users enable MFA and use a public key for authentication, the Koko SSH server does not verify the corresponding SSH private key. An attacker could exploit a vulnerability by utilizing a disclosed public key to attempt brute-force authentication against the SSH service This issue has been patched in versions 3.6.5 and 3.5.6. Users are advised to upgrade. There are no known workarounds for this issue.

Chunghwa Telecom NOKIA G-040W-Q has a vulnerability of insufficient measures to prevent multiple failed authentication attempts. An unauthenticated remote attacker can execute a crafted Javascript to expose captcha in page, making it very easy for bots to bypass the captcha check and more susceptible to brute force attacks.

OpenCart CMS v4.0.2.2 was discovered to lack a protective mechanism on its login page against excessive login attempts, allowing unauthenticated attackers to gain access to the application via a brute force attack to the password parameter.

There is no limit on the number of login attempts in the web server for the SNAP PAC S1 Firmware version R10.3b. This could allow for a brute-force attack on the built-in web server login.

InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 have has no account lockout policy configured for the login page of the product. This may allow an attacker to execute a brute-force password attack with no time limitation and without harming the normal operation of the user. This could allow an attacker to gain valid credentials for the product interface.

UVDesk Community Skeleton v1.1.1 allows unauthenticated attackers to perform brute force attacks on the login page to gain access to the application.

Improper Restriction of Excessive Authentication Attempts vulnerability in Be Devious Web Development Password Reset with Code for WordPress REST API allows Authentication Abuse.This issue affects Password Reset with Code for WordPress REST API: from n/a through 0.0.15.

Windows IIS Server Elevation of Privilege Vulnerability

Due to insufficient server-side login-attempt limit enforcement, a vulnerability in /account/login in Huntflow Enterprise before 3.10.14 could allow an unauthenticated, remote user to perform multiple login attempts for brute-force password guessing.

In Eclipse GlassFish version 7.0.16 or earlier it is possible to perform Login Brute Force attacks as there is no limitation in the number of failed login attempts.

SpliceCom Maximiser Soft PBX v1.5 and before does not restrict excessive authentication attempts, allowing attackers to bypass authentication via a brute force attack.

Improper restriction of excessive authentication attempts vulnerability in QSAN Storage Manager, XEVO, SANOS allows remote attackers to discover users’ credentials and obtain access via a brute force attack. Suggest contacting with QSAN and refer to recommendations in QSAN Document.

Improper Restriction of Excessive Authentication Attempts in GitHub repository froxlor/froxlor prior to 2.0.20.

D-Link DSL-224 firmware version 3.0.10 CWE-307: Improper Restriction of Excessive Authentication Attempts

user_oidc app is an OpenID Connect user backend for Nextcloud. Authentication can be broken/bypassed in user_oidc app. It is recommended that the Nextcloud user_oidc app is upgraded to 1.3.2

Federated Learning and Interoperability Platform (FLIP) is an open-source platform for federated training and evaluation of medical imaging AI models across healthcare institutions. The FLIP login page in versions 0.1.1 and prior has no rate limiting or CAPTCHA, enabling brute-force and credential-stuffing attacks. FLIP users are external to the organization, increasing credential reuse risk. As of time of publication, it is unclear if a patch is available.

Gestsup before 3.2.10 allows account takeover through the password recovery functionality (remote). The affected component is the file forgot_pwd.php - it uses a weak algorithm for the generation of password recovery tokens (the PHP uniqueid function), allowing a brute force attack.

Improper Restriction of Excessive Authentication Attempts, Use of Password Hash With Insufficient Computational Effort vulnerability in rustdesk-server-pro RustDesk Server Pro rustdesk-server-pro on Windows, MacOS, Linux (Peer authentication, API login modules), rustdesk-server RustDesk Server (OSS) rustdesk-server on Windows, MacOS, Linux (Peer authentication, API login modules) allows Password Brute Forcing. This vulnerability is associated with program files src/server/connection.Rs and program routines Salt/challenge generation, SHA256(SHA256(pwd+salt)+challenge) verification. This issue affects RustDesk Server Pro: through 1.7.5; RustDesk Server (OSS): through 1.1.15.

Logsign Unified SecOps Platform Authentication Bypass Vulnerability. This vulnerability allows remote attackers to bypass authentication on affected installations of Logsign Unified SecOps Platform. Authentication is not required to exploit this vulnerability. The specific flaw exists within the password reset mechanism. The issue results from the lack of restriction of excessive authentication attempts. An attacker can leverage this vulnerability to reset a user's password and bypass authentication on the system. Was ZDI-CAN-24164.

DECISO OPNsense 23.1 does not impose rate limits for authentication, allowing attackers to perform a brute-force attack to bypass authentication.

Improper restriction of excessive authentication attempts in the SSHGuard component of Netgate pfSense Plus software v22.05.1 and pfSense CE software v2.6.0 allows attackers to bypass brute force protection mechanisms via crafted web requests.

BAB TECHNOLOGIE GmbH eibPort V3 prior version 3.9.1 allow unauthenticated attackers access to /tmp path which contains some sensitive data (e.g. device serial number). Having those info, a possible loginId can be self-calculated in a brute force attack against BMX interface. This is usable and part of an attack chain to gain SSH root access.

Improper Restriction of Excessive Authentication Attempts in GitHub repository linagora/twake prior to 2023.Q1.1223.

BAB TECHNOLOGIE GmbH eibPort V3 prior version 3.9.1 allow unauthenticated attackers to access uncontrolled the login service at /webif/SecurityModule in a brute force attack. The password could be weak and default username is known as 'admin'. This is usable and part of an attack chain to gain SSH root access.

Improper Restriction of Excessive Authentication Attempts in GitHub repository azuracast/azuracast prior to 0.18.3.

EyesOfNetwork 5.3-10 uses an integer of between 8 and 10 digits for the session ID, which might be leveraged for brute-force authentication bypass (such as in CVE-2021-27513 exploitation).

A rate limiting issue in Sylius v2.0.2 allows a remote attacker to perform unrestricted brute-force attacks on user accounts, significantly increasing the risk of account compromise and denial of service for legitimate users. The Supplier's position is that the Sylius core software is not intended to address brute-force attacks; instead, customers deploying a Sylius-based system are supposed to use "firewalls, rate-limiting middleware, or authentication providers" for that functionality.

The WebSocket Application Programming Interface lacks restrictions on the number of authentication requests. This absence of rate limiting may allow an attacker to conduct denial-of-service attacks by suppressing or mis-routing legitimate charger telemetry, or conduct brute-force attacks to gain unauthorized access.

A vulnerability has been identified in RUGGEDCOM RM1224 (V6.3), SCALANCE M-800 (V6.3), SCALANCE S615 (V6.3), SCALANCE SC-600 (All Versions >= V2.1 and < V2.1.3). Multiple failed SSH authentication attempts could trigger a temporary Denial-of-Service under certain conditions. When triggered, the device will reboot automatically.

The telnet administrator service running on port 650 on Gigaset DX600A v41.00-175 devices does not implement any lockout or throttling functionality. This situation (together with the weak password policy that forces a 4-digit password) allows remote attackers to easily obtain administrative access via brute-force attacks.

Snap One Wattbox WB-300-IP-3 versions WB10.9a17 and prior could bypass the brute force protection, allowing multiple attempts to force a login.

A lack of rate limiting on the password reset endpoint of Chamberlain myQ v5.222.0.32277 (on iOS) allows attackers to compromise user accounts via a bruteforce attack.

A client side rate limit issue discovered in Connectize AC21000 G6 641.139.1.1256 allows attackers to gain escalated privileges via brute force style attacks.

The WebSocket Application Programming Interface lacks restrictions on the number of authentication requests. This absence of rate limiting may allow an attacker to conduct denial-of-service attacks by suppressing or misrouting legitimate charger telemetry, or conduct brute-force attacks to gain unauthorized access.

An attacker can decrypt the Ovarro TBox login password by communication capture and brute force attacks.

MyTube is a self-hosted downloader and player for several video websites Prior to version 1.8.72, an unauthenticated attacker can lock out administrator and visitor accounts from password-based authentication by triggering failed login attempts. The application exposes three password verification endpoints, all of which are publicly accessible. All three endpoints share a single file-backed login attempt state stored in `login-attempts.json`. When any endpoint records a failed authentication attempt via `recordFailedAttempt()`, the shared login attempt state is updated, increasing the `failedAttempts` counter and adjusting the associated timestamps and cooldown values. Before verifying a password, each endpoint calls `canAttemptLogin()`. This function checks the shared JSON file to determine whether a cooldown period is active. If the cooldown has not expired, the request is rejected before the password is validated. Because the failed attempt counter and cooldown timer are globally shared, failed authentication attempts against any endpoint affect all other endpoints. An attacker can exploit this by repeatedly sending invalid authentication requests to any of these endpoints, incrementing the shared counter and waiting for the cooldown period between attempts. By doing so, the attacker can progressively increase the lockout duration until it reaches 24 hours, effectively preventing legitimate users from authenticating. Once the maximum lockout is reached, the attacker can maintain the denial of service indefinitely by waiting for the cooldown to expire and sending another failed attempt, which immediately triggers another 24-hour lockout if no successful login occurred in the meantime. Version 1.8.72 fixes the vulnerability.

Microsoft Exchange Server Elevation of Privilege Vulnerability

Pluck CMS 4.7.18 does not restrict failed login attempts, allowing attackers to execute a brute force attack.

JATOS 3.9.4 contains a denial-of-service (DoS) vulnerability in the authentication system, where an attacker can prevent legitimate users from accessing their accounts by repeatedly sending multiple failed login attempts. Specifically, by submitting 3 incorrect login attempts every minute, the attacker can trigger the account lockout mechanism on the account level, effectively locking the user out indefinitely. Since the lockout is applied to the user account and not based on the IP address, any attacker can trigger the lockout on any user account, regardless of their privileges.

Outline is a service that allows for collaborative documentation. Outline implements an Email OTP login flow for users not associated with an Identity Provider. Starting in version 0.86.0 and prior to version 1.6.0, Outline does not invalidate OTP codes based on amount or frequency of invalid submissions, rather it relies on the rate limiter to restrict attempts. Consequently, identified bypasses in the rate limiter permit unrestricted OTP code submissions within the codes lifetime. This allows attackers to perform brute force attacks which enable account takeover. Version 1.6.0 fixes the issue.

The telnet server for 3Com hardware such as PS40 SuperStack II does not delay or disconnect remote attackers who provide an incorrect username or password, which makes it easier to break into the server via brute force password guessing.

Beck IPC GmbH IPC@CHIP telnet service does not delay or disconnect users from the service when bad passwords are entered, which makes it easier for remote attackers to conduct brute force password guessing attacks.

The WebSocket Application Programming Interface lacks restrictions on the number of authentication requests. This absence of rate limiting may allow an attacker to conduct denial-of-service attacks by suppressing or mis-routing legitimate charger telemetry, or conduct brute-force attacks to gain unauthorized access.