In Limesurvey before 3.17.14, the entire database is exposed through browser caching.

languages.inc.php in DynPG CMS 4.2.0 allows remote attackers to obtain sensitive information via a direct request, which reveals the installation path in an error message.

Missing Authorization vulnerability in WPExperts Wholesale For WooCommerce.This issue affects Wholesale For WooCommerce: from n/a through 2.3.0.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in CodePeople Contact Form Email.This issue affects Contact Form Email: from n/a through 1.3.44.

Reviewer in EMC SourceOne Email Supervisor before 7.2 does not properly limit attempts to authenticate, which makes it easier for remote attackers to obtain access via a brute-force approach.

** DISPUTED ** A vulnerability, which was classified as problematic, was found in Intelbras MHDX 1004, MHDX 1008, MHDX 1016, MHDX 5016, HDCVI 1008 and HDCVI 1016 up to 20240401. This affects an unknown part of the file /cap.js of the component HTTP GET Request Handler. The manipulation leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The identifier VDB-258933 was assigned to this vulnerability. NOTE: The vendor explains that they do not classify the information shown as sensitive and therefore there is no vulnerability which is about to harm the user.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in ABB Flow-X firmware on Flow-X embedded hardware (web service modules) allows Footprinting.This issue affects Flow-X: before 4.0.

mod_cgi in lighttpd 1.4.18 sends the source code of CGI scripts instead of a 500 error when a fork failure occurs, which might allow remote attackers to obtain sensitive information.

MyBB (aka MyBulletinBoard) before 1.4.12 does not properly handle a configuration with a visible forum that contains hidden threads, which allows remote attackers to obtain sensitive information by reading the Latest Threads block of the Portal Page.

Mattermost allows an attacker to request a preview of an existing message when creating a new message via the createPost API call, disclosing the contents of the linked message.

Separate Groups mode restrictions were not honored when performing a forum export, which would export forum data for all groups. By default this only provided additional access to non-editing teachers.

Habari 0.6.5 allows remote attackers to obtain sensitive information via a direct request to (1) header.php and (2) comments_items.php in system/admin/, which reveals the installation path in an error message.

The CMP – Coming Soon & Maintenance plugin for WordPress is vulnerable to Information Exposure in versions up to, and including, 4.1.6 via the cmp_get_post_detail function. This can allow unauthenticated individuals to obtain the contents of any non-password-protected, published post or page even when maintenance mode is enabled.

Directus is a real-time API and App dashboard for managing SQL database content. Starting in version 9.0.0-alpha.4 and prior to version 11.5.0, the `search` query parameter allows users with access to a collection to filter items based on fields they do not have permission to view. This allows the enumeration of unknown field contents. The searchable columns (numbers & strings) are not checked against permissions when injecting the `where` clauses for applying the search query. This leads to the possibility of enumerating those un-permitted fields. Version 11.5.0 fixes the issue.

Nautobot is a Network Source of Truth and Network Automation Platform. A number of Nautobot URL endpoints were found to be improperly accessible to unauthenticated (anonymous) users. These endpoints will not disclose any Nautobot data to an unauthenticated user unless the Nautobot configuration variable EXEMPT_VIEW_PERMISSIONS is changed from its default value (an empty list) to permit access to specific data by unauthenticated users. This vulnerability is fixed in 1.6.16 and 2.1.9.

Ampache is a web based audio/video streaming application and file manager. Versions prior to 4.4.1 allow unauthenticated access to Ampache using the subsonic API. To successfully make the attack you must use a username that is not part of the site to bypass the auth checks. For more details and workaround guidance see the referenced GitHub security advisory.

Products.GenericSetup is a mini-framework for expressing the configured state of a Zope Site as a set of filesystem artifacts. In Products.GenericSetup before version 2.1.1 there is an information disclosure vulnerability - anonymous visitors may view log and snapshot files generated by the Generic Setup Tool. The problem has been fixed in version 2.1.1. Depending on how you have installed Products.GenericSetup, you should change the buildout version pin to 2.1.1 and re-run the buildout, or if you used pip simply do pip install `"Products.GenericSetup>=2.1.1"`.

An issue was discovered in the Infosysta "In-App & Desktop Notifications" app before 1.6.14_J8 for Jira. It is possible to obtain a list of all Jira projects without authentication/authorization via the plugins/servlet/nfj/ProjectFilter?searchQuery= URI.

When in Private Browsing Mode on Windows 10, the Windows keyboard may retain word suggestions to improve the accuracy of the keyboard. This vulnerability affects Firefox < 72.

A vulnerability in the TFTP service of Cisco Network Convergence System 1000 Series software could allow an unauthenticated, remote attacker to retrieve arbitrary files from the targeted device, possibly resulting in information disclosure. The vulnerability is due to improper validation of user-supplied input within TFTP requests processed by the affected software. An attacker could exploit this vulnerability by using directory traversal techniques in malicious requests sent to the TFTP service on a targeted device. An exploit could allow the attacker to retrieve arbitrary files from the targeted device, resulting in the disclosure of sensitive information. This vulnerability affects Cisco IOS XR Software releases prior to Release 6.5.2 for Cisco Network Convergence System 1000 Series devices when the TFTP service is enabled.

SilverStripe 2.3.x before 2.3.6 allows remote attackers to obtain sensitive information via the (1) debug_memory parameter to core/control/Director.php or (2) debug_profile parameter to main.php.

IBM Security Verify Access Docker 10.0.0 reveals version information in HTTP requests that could be used in further attacks against the system. IBM X-Force ID: 197972.

admin/upgrade_unattended.php in MantisBT before 1.2.4 allows remote attackers to obtain sensitive information via an invalid db_type parameter, which reveals the installation path in an error message, related to an unsafe call by MantisBT to a function in the ADOdb Library for PHP.

index.php in Enano CMS 1.1.7pl1, and possibly other versions before 1.1.8, 1.0.6pl3, and 1.1.7pl2, allows remote attackers to obtain sensitive information via a crafted title parameter, which reveals the installation path in an error message.

The Register Plus plugin 3.5.1 and earlier for WordPress allows remote attackers to obtain sensitive information via a direct request to (1) dash_widget.php and (2) register-plus.php, which reveals the installation path in an error message.

The Linux kernel, when using IPv6, allows remote attackers to determine whether a host is sniffing the network by sending an ICMPv6 Echo Request to a multicast address and determining whether an Echo Reply is sent, as demonstrated by thcping.

A vulnerability in the web-based management interface of Cisco Application Policy Infrastructure Controller (APIC) Software could allow an unauthenticated, remote attacker to access sensitive system usage information. The vulnerability is due to a lack of proper data protection mechanisms for certain components in the underlying Application Centric Infrastructure (ACI). An attacker could exploit this vulnerability by attempting to observe certain network traffic when accessing the APIC. A successful exploit could allow the attacker to access and collect certain tracking data and usage statistics on an affected device.

OMERO.web is open source Django-based software for managing microscopy imaging. OMERO.web before version 5.9.0 loads various information about the current user such as their id, name and the groups they are in, and these are available on the main webclient pages. This represents an information exposure vulnerability. Some additional information being loaded is not used by the webclient and is being removed in this release. This is fixed in version 5.9.0.

Double-Take 5.0.0.2865 and earlier, distributed under the HP StorageWorks Storage Mirroring name and other names, allows remote attackers to obtain sensitive information via a packet of type (1) 0x2728, which provides operating system and path information; (2) 0x274e, which lists Ethernet adapters; (3) 0x2726, which provides filesystem information; (4) 0x274f, which specifies the printer driver; or (5) 0x2757, which provides recent log entries.

Cobham Sea Tel v170 224521 through v194 225444 devices allow attackers to obtain potentially sensitive information, such as a vessel's latitude and longitude, via the public SNMP community.

The Yame | Link In Bio plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 0.9.0 through the publicly accessible phpinfo.php script. This makes it possible for unauthenticated attackers to view potentially sensitive information contained in the exposed file.

Froxlor before 0.9.33.2 with the default configuration/setup might allow remote attackers to obtain the database password by reading /logs/sql-error.log.

A vulnerability in the Graphite service of Cisco HyperFlex software could allow an unauthenticated, remote attacker to retrieve data from the Graphite service. The vulnerability is due to insufficient authentication controls. An attacker could exploit this vulnerability by sending crafted requests to the Graphite service. A successful exploit could allow the attacker to retrieve any statistics from the Graphite service. Versions prior to 3.5(2a) are affected.

simple-php-captcha before commit 9d65a945029c7be7bb6bc893759e74c5636be694 allows remote attackers to automatically generate the captcha response by running the same code on the client-side.

A vulnerability in the Simple Object Access Protocol (SOAP) of Cisco TelePresence Management Suite (TMS) software could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to a lack of proper access and authentication controls on the affected TMS software. An attacker could exploit this vulnerability by gaining access to internal, trusted networks to send crafted SOAP calls to the affected device. If successful, an exploit could allow the attacker to access system management tools. Under normal circumstances, this access should be prohibited.

An issue was discovered in PRiSE adAS 1.7.0. The current database password is embedded in the change password form.

Dojo Toolkit, as used in the Web client in IBM Rational ClearQuest 7.1.1.x before 7.1.1.4 and 7.1.2.x before 7.1.2.1, allows remote attackers to read cookies by navigating to a Dojo file, related to an "open direct" issue.

InBody App for iOS versions prior to 2.3.30 and InBody App for Android versions prior to 2.2.90(510) contain a vulnerability which may lead to information disclosure only when it works with the body composition analyzer InBody Dial. This may allow an attacker who can connect to the InBody Dial with InBody App may obtain a victim's measurement result measured by InBody Dial.

An issue was discovered in GitLab Community and Enterprise Edition 11.2 through 12.2.1. Insufficient permission checks were being applied when displaying CI results, potentially exposing some CI metrics data to unauthorized users.

AjaxDomainServlet in Zoho ManageEngine ServiceDesk Plus 10 allows User Enumeration. NOTE: the vendor's position is that this is intended functionality

An information disclosure exists in < 12.3.2, < 12.2.6, and < 12.1.12 for GitLab Community Edition (CE) and Enterprise Edition (EE). The path of a private project, that used to be public, would be disclosed in the unsubscribe email link of issues and merge requests.

The Developer Toolbar plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 1.0.3 through the publicly accessible phpinfo.php script. This makes it possible for unauthenticated attackers to view potentially sensitive information contained in the exposed file.

IBM Security Verify Access 20.07 could disclose sensitive information in HTTP server headers that could be used in further attacks against the system. IBM X-Force ID: 199398.

D-Link DSL-2875AL and DSL-2877AL devices through 1.00.05 are prone to information disclosure via a simple crafted request to index.asp on the web management server because of username_v and password_v variables.

An information disclosure exists in < 12.3.2, < 12.2.6, and < 12.1.12 for GitLab Community Edition (CE) and Enterprise Edition (EE) where the assignee(s) of a confidential issue in a private project would be disclosed to a guest via milestones.

An issue was discovered in GitLab Community and Enterprise Edition 7.9 through 12.2.1. EXIF Geolocation data was not being removed from certain image uploads.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Mitsubishi Electric MELSEC iQ-R series Safety CPU modules R08/16/32/120SFCPU firmware versions "26" and prior and Mitsubishi Electric MELSEC iQ-R series SIL2 Process CPU modules R08/16/32/120PSFCPU firmware versions "11" and prior allows a remote unauthenticated attacker to acquire legitimate user names registered in the module via brute-force attack on user names.

Opera before 11.00 does not clear WAP WML form fields after manual navigation to a new web site, which allows remote attackers to obtain sensitive information via an input field that has the same name as an input field on a previously visited web site.

An information disclosure vulnerability exists in GitLab CE/EE <v12.3.2, <v12.2.6, and <v12.1.12 that allowed an attacker to view private system notes from a GraphQL endpoint.