A vulnerability was found in Tenda WH450 1.0.0.18. This affects an unknown function of the file /goform/PPTPDClient of the component HTTP Request Handler. Performing a manipulation of the argument Username results in stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made public and could be used.

A security vulnerability has been detected in Totolink NR1800X 9.1.0u.6279_B20210910. The impacted element is the function find_host_ip of the component lighttpd. Such manipulation of the argument Host leads to stack-based buffer overflow. The attack can be executed remotely. The exploit has been disclosed publicly and may be used.

A vulnerability was found in D-Link DIR-600 up to 2.15WWb02. Affected by this vulnerability is an unknown functionality of the file hedwig.cgi of the component HTTP Header Handler. The manipulation of the argument Cookie results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

A security vulnerability has been detected in EFM ipTIME NAS1dual 1.5.24. This issue affects the function get_csrf_whites of the file /cgi/advanced/misc_main.cgi. Such manipulation leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A stack-based buffer overflow vulnerability exists in freeFTPd version 1.0.10 and earlier in the handling of the FTP PASS command. When an attacker sends a specially crafted password string, the application fails to validate input length, resulting in memory corruption. This can lead to denial of service or arbitrary code execution. Exploitation requires the anonymous user account to be enabled.

A flaw has been found in Tenda WH450 1.0.0.18. The affected element is an unknown function of the file /goform/Natlimit of the component HTTP Request Handler. This manipulation of the argument page causes stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been published and may be used.

A weakness has been identified in Tenda AC8 up to 16.03.50.11. This vulnerability affects the function doSystemCmd of the file /goform/SysToolChangePwd of the component HTTP Endpoint. This manipulation of the argument local_2c causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks.

A security flaw has been discovered in D-Link DIR-816 1.10CNB05. This affects an unknown function of the file /goform/form2RepeaterStep2.cgi of the component goahead. The manipulation of the argument key1/key2/key3/key4/pskValue results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer.

A weakness has been identified in D-Link DIR-816 1.10CNB05. This impacts an unknown function of the file /goform/form2Wl5RepeaterStep2.cgi of the component goahead. This manipulation of the argument key1/key2/key3/key4/pskValue causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was detected in D-Link DIR-816 1.10CNB05. Affected by this vulnerability is an unknown functionality of the file /goform/form2Wl5BasicSetup.cgi of the component goahead. Performing a manipulation of the argument pskValue results in stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A weakness has been identified in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. Affected by this issue is the function Local_Backup_Info of the file /cgi-bin/local_backup_mgr.cgi. This manipulation of the argument f_idx causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks.

A security vulnerability has been detected in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This affects the function Downloads_Schedule_Info of the file /cgi-bin/download_mgr.cgi. Such manipulation leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used.

A flaw has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This issue affects the function UPnP_AV_Server_Path_Setting of the file /cgi-bin/app_mgr.cgi. Executing a manipulation can lead to stack-based buffer overflow. The attack may be launched remotely. The exploit has been published and may be used.

A security vulnerability has been detected in D-Link DIR-816 1.10CNB05. Affected is an unknown function of the file /goform/form2WlanBasicSetup.cgi of the component goahead. Such manipulation of the argument pskValue leads to stack-based buffer overflow. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in Tenda A15 15.13.07.13. The impacted element is the function UploadCfg of the file /cgi-bin/UploadCfg. The manipulation of the argument File leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was detected in Tenda WH450 1.0.0.18. Impacted is an unknown function of the file /goform/NatStaticSetting. The manipulation of the argument page results in stack-based buffer overflow. The attack may be performed from remote. The exploit is now public and may be used.

This vulnerability in AX53 v1 results from insufficient input sanitization in the device’s probe handling logic, where unvalidated parameters can trigger a stack-based buffer overflow that causes the affected service to crash and, under specific conditions, may enable remote code execution through complex heap-spray techniques. Successful exploitation may result in repeated service unavailability and, in certain scenarios, allow an attacker to gain control of the device.

EHG2408 series switch developed by Atop Technologies has a Stack-based Buffer Overflow vulnerability, allowing unauthenticated remote attackers to control the program's execution flow and execute arbitrary code.

CVE-2026-33447 is a buffer overflow in a message parsing function of the Secure Access client prior to 14.50. Attackers with control of a modified server can send a special packet that can overwrite a small portion of memory conceivably leading to memory corruption or denial of service.

A security flaw has been discovered in Tenda AC15 up to 15.13.07.13. Affected by this issue is some unknown functionality of the file /goform/TextEditingConversion. The manipulation of the argument wpapsk_crypto2_4g results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks.

Adobe ColdFusion versions Update 14 (and earlier) and Update 4 (and earlier) are affected by a Stack-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue does not require user interaction, the vulnerability is triggered when a crafted network packet is sent to the server.

A vulnerability, which was classified as critical, has been found in D-Link DAP-1562 1.10. Affected by this issue is the function http_request_parse of the component HTTP Header Handler. The manipulation of the argument Authorization leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Advantech R-SeeNet Versions 2.4.17 and prior are vulnerable to a stack-based buffer overflow. An unauthorized attacker can remotely overflow the stack buffer and enable remote code execution.

A vulnerability was determined in Tenda W6-S 1.0.0.4(510). This impacts an unknown function of the file /bin/httpd of the component R7websSsecurityHandler. Executing a manipulation of the argument Cookie can lead to stack-based buffer overflow. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized.

In Advantech WebAccess versions V8.2_20170817 and prior, WebAccess versions V8.3.0 and prior, WebAccess Dashboard versions V.2.0.15 and prior, WebAccess Scada Node versions prior to 8.3.1, and WebAccess/NMS 2.0.3 and prior, several stack-based buffer overflow vulnerabilities have been identified, which may allow an attacker to execute arbitrary code.

OpenWrt Project is a Linux operating system targeting embedded devices. In versions prior to 24.10.6 and 25.12.1, the mdns daemon has a Stack-based Buffer Overflow vulnerability in the match_ipv6_addresses function, triggered when processing PTR queries for IPv6 reverse DNS domains (.ip6.arpa) received via multicast DNS on UDP port 5353. During processing, the domain name from name_buffer is copied via strcpy into a fixed 256-byte stack buffer, and then the reverse IPv6 request is extracted into a buffer of only 46 bytes (INET6_ADDRSTRLEN). Because the length of the data is never validated before this extraction, an attacker can supply input larger than 46 bytes, causing an out-of-bounds write. This allows a specially crafted DNS query to overflow the stack buffer in match_ipv6_addresses, potentially enabling remote code execution. This issue has been fixed in versions 24.10.6 and 25.12.1.

A vulnerability has been found in Tenda WH450 1.0.0.18. The impacted element is an unknown function of the file /goform/PPTPClient of the component HTTP Request Handler. Such manipulation of the argument netmsk leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A security flaw has been discovered in Tenda WH450 1.0.0.18. This impacts an unknown function of the file /goform/wirelessRestart of the component HTTP Request Handler. The manipulation of the argument GO results in stack-based buffer overflow. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks.

A vulnerability has been found in TOTOLINK T10 4.1.8cu.5083_B20200521. This affects the function sprintf of the file /cgi-bin/cstecgi.cgi. Such manipulation of the argument loginAuthUrl leads to stack-based buffer overflow. The attack may be performed from remote.

A security vulnerability has been detected in Tenda WH450 1.0.0.18. Affected by this issue is some unknown functionality of the file /goform/L7Im of the component HTTP Request Handler. Such manipulation of the argument page leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used.

A vulnerability has been found in Tenda WH450 1.0.0.18. This issue affects some unknown processing of the file /goform/SafeUrlFilter. The manipulation of the argument page leads to stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used.

A weakness has been identified in Tenda WH450 1.0.0.18. Affected is an unknown function of the file /goform/onSSIDChange of the component HTTP Request Handler. This manipulation of the argument ssid_index causes stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks.

A Stack-based Buffer Overflow issue was discovered in Fuji Electric V-Server VPR 4.0.1.0 and prior. The stack-based buffer overflow vulnerability has been identified, which may allow remote code execution.

A flaw has been found in Tenda AC21 16.03.08.16. This affects an unknown part of the file /goform/SetIpMacBind. Executing a manipulation of the argument list can lead to stack-based buffer overflow. The attack can be executed remotely. The exploit has been published and may be used.

A vulnerability has been found in D-Link DIR-816L 2_06_b09_beta. This affects the function genacgi_main of the file gena.cgi. The manipulation of the argument SERVER_ID/HTTP_SID leads to stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A weakness has been identified in LB-LINK BL-WR9000 2.4.9. The affected element is the function sub_44E8D0 of the file /goform/get_virtual_cfg. Executing a manipulation can lead to stack-based buffer overflow. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in D-Link DIR-816L 2_06_b09_beta. Affected by this vulnerability is the function authenticationcgi_main of the file /authentication.cgi. Performing manipulation of the argument Password results in stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit is now public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

MZ Automation's libIEC61850 (versions 1.4 and prior; version 1.5 prior to commit a3b04b7bc4872a5a39e5de3fdc5fbde52c09e10e) is vulnerable to a stack-based buffer overflow, which could allow an attacker to crash the device or remotely execute arbitrary code.

A stack-based buffer overflow in mangle_to_hex_lower() and mangle_to_hex_upper() in src/rp_cpu.c in hashcat v7.1.2 allows an attacker to cause a denial of service or possibly execute arbitrary code via a crafted rule file, or via the -j or -k rule options used with password candidates of 128 or more characters. The vulnerability is caused by a bounds check that fails to account for the 2x expansion that occurs when password bytes are converted to hexadecimal.

A vulnerability was determined in D-Link DIR-816L 2_06_b09_beta. This issue affects the function soapcgi_main of the file /soap.cgi. This manipulation causes stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. This vulnerability only affects products that are no longer supported by the maintainer.

When receiving calls using WhatsApp for Android, a missing size check when parsing a sender-provided packet allowed for a stack-based overflow. This issue affects WhatsApp for Android prior to 2.18.248 and WhatsApp Business for Android prior to 2.18.132.

A Stack-based Buffer Overflow issue was discovered in GE D60 Line Distance Relay devices running firmware Version 7.11 and prior. Multiple stack-based buffer overflow vulnerabilities have been identified, which may allow remote code execution.

rust-openssl provides OpenSSL bindings for the Rust programming language. From 0.10.39 to before 0.10.78, EVP_DigestFinal() always writes EVP_MD_CTX_size(ctx) to the out buffer. If out is smaller than that, MdCtxRef::digest_final() writes past its end, usually corrupting the stack. This is reachable from safe Rust. This vulnerability is fixed in 0.10.78.

A vulnerability has been found in Tenda AC21 16.03.08.16. This vulnerability affects unknown code of the file /goform/SetSysTimeCfg. The manipulation of the argument timeZone/time leads to stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used.

Zoom On-Premise Meeting Connector Zone Controller (ZC) before version 4.8.20220419.112 fails to properly parse STUN error codes, which can result in memory corruption and could allow a malicious actor to crash the application. In versions older than 4.8.12.20211115, this vulnerability could also be leveraged to execute arbitrary code.

A vulnerability was detected in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This vulnerability affects the function cgi_myfavorite_del_user/cgi_myfavorite_verify of the file /cgi-bin/gui_mgr.cgi. Performing a manipulation results in stack-based buffer overflow. The attack may be initiated remotely. The exploit is now public and may be used.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Kepware KEPServerEX 6.11.718.0. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of text encoding conversions. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-18411.

A security flaw has been discovered in Tenda O3 1.0.0.10(2478). Affected by this issue is the function SetValue/GetValue of the file /goform/setDmzInfo. The manipulation of the argument dmzIP results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks.

PJSIP is a free and open source multimedia communication library written in C. In 2.16 and earlier, a stack buffer overflow exists in pjsip_auth_create_digest2() in PJSIP when using pre-computed digest credentials (PJSIP_CRED_DATA_DIGEST). The function copies credential data using cred_info->data.slen as the length without an upper-bound check, which can overflow the fixed-size ha1 stack buffer (128 bytes) if data.slen exceeds the expected digest string length.