A command injection vulnerability in the web server of some Hikvision product. Due to the insufficient input validation, attacker can exploit the vulnerability to launch a command injection attack by sending some messages with malicious commands.
A vulnerability classified as critical was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. Affected by this vulnerability is the function cgi_FMT_Std2R5_2nd_DiskMGR of the file /cgi-bin/hd_config.cgi. The manipulation of the argument f_source_dev leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.
An issue was discovered in DTS Monitoring 3.57.0. The parameter common_name within the SSL Certificate check function is vulnerable to OS command injection (blind).
A vulnerability was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. It has been declared as critical. This vulnerability affects the function cgi_FMT_R5_SpareDsk_DiskMGR of the file /cgi-bin/hd_config.cgi of the component HTTP POST Request Handler. The manipulation of the argument f_source_dev leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.
A vulnerability was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. It has been rated as critical. This issue affects the function cgi_FMT_Std2R5_1st_DiskMGR of the file /cgi-bin/hd_config.cgi of the component HTTP POST Request Handler. The manipulation of the argument f_source_dev leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.
Cohesive Networks VNS3 Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Cohesive Networks VNS3. Authentication is not required to exploit this vulnerability. The specific flaw exists within the web service, which listens on TCP port 8000 by default. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-24160.
A vulnerability classified as critical was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. This vulnerability affects the function cgi_unzip of the file /cgi-bin/webfile_mgr.cgi of the component HTTP POST Request Handler. The manipulation of the argument path leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.
A vulnerability classified as critical has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. Affected is the function cgi_FMT_R12R5_1st_DiskMGR of the file /cgi-bin/hd_config.cgi. The manipulation of the argument f_source_dev leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.
A command injection vulnerability has been reported to affect QNAP device running QVR. If exploited, this vulnerability could allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR 5.1.5 build 20210803 and later
Liferay Portal 6.2.5 allows Command=FileUpload&Type=File&CurrentFolder=/ requests when frmfolders.html exists. NOTE: The vendor disputes this issue because the exploit reference link only shows frmfolders.html is accessible and does not demonstrate how an unauthorized user can upload a file.
vllm-project vllm version 0.6.0 contains a vulnerability in the AsyncEngineRPCServer() RPC server entrypoints. The core functionality run_server_loop() calls the function _make_handler_coro(), which directly uses cloudpickle.loads() on received messages without any sanitization. This can result in remote code execution by deserializing malicious pickle data.
A weakness has been identified in Topsec TopACM 3.0. Affected by this vulnerability is an unknown functionality of the file /view/systemConfig/management/nmc_sync.php of the component HTTP Request Handler. Executing a manipulation of the argument template_path can lead to os command injection. The attack can be executed remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814 and classified as critical. Affected by this issue is the function module_enable_disable of the file /cgi-bin/apkg_mgr.cgi of the component HTTP POST Request Handler. The manipulation of the argument f_module_name leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.
A vulnerability was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. It has been declared as critical. This vulnerability affects the function cgi_FMT_Std2R1_DiskMGR of the file /cgi-bin/hd_config.cgi. The manipulation of the argument f_newly_dev leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.
OS Command Injection vulnerability in es128 ssl-utils 1.0.0 for Node.js allows attackers to execute arbitrary commands via unsanitized shell metacharacters provided to the createCertRequest() and the createCert() functions.
An issue was discovered in DTS Monitoring 3.57.0. The parameter ip within the Ping check function is vulnerable to OS command injection (blind).
Certain NETGEAR devices are affected by command injection by an unauthenticated attacker via the vulnerable /sqfs/lib/libsal.so.0.0 library used by a CGI application, as demonstrated by setup.cgi?token=';$HTTP_USER_AGENT;' with an OS command in the User-Agent field. This affects GC108P before 1.0.7.3, GC108PP before 1.0.7.3, GS108Tv3 before 7.0.6.3, GS110TPPv1 before 7.0.6.3, GS110TPv3 before 7.0.6.3, GS110TUPv1 before 1.0.4.3, GS710TUPv1 before 1.0.4.3, GS716TP before 1.0.2.3, GS716TPP before 1.0.2.3, GS724TPPv1 before 2.0.4.3, GS724TPv2 before 2.0.4.3, GS728TPPv2 before 6.0.6.3, GS728TPv2 before 6.0.6.3, GS752TPPv1 before 6.0.6.3, GS752TPv2 before 6.0.6.3, MS510TXM before 1.0.2.3, and MS510TXUP before 1.0.2.3.
** UNSUPPORTED WHEN ASSIGNED ** A command injection vulnerability in the functions formSysCmd(), formUpgradeCert(), and formDelcert() in the Zyxel NWA1100-N firmware version 1.00(AACE.1)C0 could allow an unauthenticated attacker to execute some OS commands to access system files on an affected device.
Thecus 4800Eco was discovered to contain a command injection vulnerability via the username parameter in /adm/setmain.php.
TN-4900 Series firmware versions v1.2.4 and prior and TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command injection vulnerability. This vulnerability stems from inadequate input validation in the certificate management function, which could potentially allow malicious users to execute remote code on affected devices.
A vulnerability was found in TOTOLINK AC1200 T8 4.1.5cu.862_B20230228. It has been classified as critical. This affects the function setTracerouteCfg. The manipulation leads to os command injection. It is possible to initiate the attack remotely. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
From Apache NiFi MiNiFi C++ version 0.5.0 the c2 protocol implements an "agent-update" command which was designed to patch the application binary. This "patching" command defaults to calling a trusted binary, but might be modified to an arbitrary value through a "c2-update" command. Said command is then executed using the same privileges as the application binary. This was addressed in version 0.10.0
Connected IO v2.1.0 and prior has a command as part of its communication protocol allowing the management platform to specify arbitrary OS commands for devices to execute. Attackers abusing this dangerous functionality may issue all devices OS commands to execute, resulting in arbitrary remote command execution.
QSAN SANOS factory reset function does not filter special parameters. Remote attackers can use this vulnerability to inject and execute arbitrary commands without permissions. The referred vulnerability has been solved with the updated version of QSAN SANOS v2.1.0.
TN-4900 Series firmware versions v1.2.4 and prior and TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command injection vulnerability. This vulnerability stems from insufficient input validation in the key-generation function, which could potentially allow malicious users to execute remote code on affected devices.
Improper input validation in the built-in web server in Moxa NPort IAW5000A-I/O series firmware version 2.2 or earlier may allow a remote attacker to execute commands.
Zoho ManageEngine ADSelfService Plus through 6102 allows unauthenticated remote code execution in non-English editions.
An attacker could leverage an API to pass along a malicious file that could then manipulate the process creation command line in MDT AutoSave versions prior to v6.02.06 and run a command line argument. This could then be leveraged to run a malicious process.
A vulnerability has been found in TOTOLINK AC1200 T8 4.1.5cu.862_B20230228 and classified as critical. Affected by this vulnerability is the function setDiagnosisCfg. The manipulation leads to os command injection. The attack can be launched remotely. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
WebSVN before 2.6.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the search parameter.
The dashboard component of StackLift LocalStack 0.12.6 allows attackers to inject arbitrary shell commands via the functionName parameter.
A vulnerability was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. It has been classified as critical. This affects the function sprintf of the file /cgi-bin/hd_config.cgi. The manipulation of the argument f_mount leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.
A vulnerability was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. It has been classified as critical. This affects the function webdav_mgr of the file /cgi-bin/webdav_mgr.cgi of the component HTTP POST Request Handler. The manipulation of the argument f_path leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.
Improper Input Validation vulnerability of Authenticated User in Progress LoadMaster allows : OS Command Injection.This issue affects: Product Affected Versions LoadMaster From 7.2.55.0 to 7.2.60.1 (inclusive) From 7.2.49.0 to 7.2.54.12 (inclusive) 7.2.48.12 and all prior versions Multi-Tenant Hypervisor 7.1.35.12 and all prior versions ECS All prior versions to 7.2.60.1 (inclusive)
A vulnerability, which was classified as critical, was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. Affected is the function cgi_s3_modify of the file /cgi-bin/s3.cgi of the component HTTP POST Request Handler. The manipulation of the argument f_job_name leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.
SPIP before 4.3.2, 4.2.16, and 4.1.18 is vulnerable to a command injection issue. A remote and unauthenticated attacker can execute arbitrary operating system commands by sending a crafted multipart file upload HTTP request.
OS command injection vulnerability in Array function in QSAN XEVO allows remote unauthenticated attackers to execute arbitrary commands via status parameter. The referred vulnerability has been solved with the updated version of QSAN XEVO v2.1.0.
QuickInstall in QSAN Storage Manager does not filter special parameters properly that allows remote unauthenticated attackers to inject and execute arbitrary commands. The referred vulnerability has been solved with the updated version of QSAN Storage Manager v3.3.3.
A vulnerability exists in RaspAP 2.6 to 2.6.5 in the "iface" GET parameter in /ajax/networking/get_netcfg.php, when the "iface" parameter value contains special characters such as ";" which enables an unauthenticated attacker to execute arbitrary OS commands.
EPrints 3.4.2 allows remote attackers to read arbitrary files and possibly execute commands via crafted LaTeX input to a cgi/latex2png?latex= URI.
A vulnerability classified as critical has been found in D-Link DAR-7000 up to 20240912. Affected is an unknown function of the file /view/DBManage/Backup_Server_commit.php. The manipulation of the argument host leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.
zzzcms zzzphp before 2.0.4 allows remote attackers to execute arbitrary OS commands by placing them in the keys parameter of a ?location=search URI, as demonstrated by an OS command within an "if" "end if" block.
A vulnerability has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814 and classified as critical. Affected by this vulnerability is the function cgi_s3 of the file /cgi-bin/s3.cgi of the component HTTP POST Request Handler. The manipulation of the argument f_a_key leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.
The QSAN SANOS setting page does not filter special parameters. Remote attackers can use this vulnerability to inject and execute arbitrary commands without permissions. The referred vulnerability has been solved with the updated version of QSAN SANOS v2.1.0.
A vulnerability, which was classified as critical, has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. This issue affects the function cgi_add_zip of the file /cgi-bin/webfile_mgr.cgi of the component HTTP POST Request Handler. The manipulation of the argument path leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.
An issue was discovered in ExecuteCommand() in AVEVA Edge (formerly InduSoft Web Studio) versions R2020 and prior that allows unauthenticated arbitrary commands to be executed.
A vulnerability was found in Raisecom MSG1200, MSG2100E, MSG2200 and MSG2300 3.90 and classified as critical. Affected by this issue is the function sslvpn_config_mod of the file /vpn/list_ip_network.php of the component Web Interface. The manipulation of the argument template/stylenum leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-273560. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
LG N1A1 NAS 3718.510 is affected by: Remote Command Execution. The impact is: execute arbitrary code (remote). The attack vector is: HTTP POST with parameters.
A OS Command Injection vulnerability was discovered in Artica Proxy 4.30.000000. Attackers can execute OS commands in cyrus.events.php with GET param logs and POST param rp.
upgrade_handle.php on NUUO NVRmini devices allows Remote Command Execution via shell metacharacters in the uploaddir parameter for a writeuploaddir command.