OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.18.0 and 3.1.13.0, a signed 32-bit integer overflow in the loop index expression i * 4 inside SwapRGBABytes() causes the function to compute a large negative pointer offset when processing kABGR DPX images with large dimensions. The immediate crash is an out-of-bounds read (the memcpy at line 45 reads from &input[i * 4] first), but the subsequent write operations at lines 46–49 target the same wrapped offset — making this a combined OOB read+write primitive. This vulnerability is fixed in 3.0.18.0 and 3.1.13.0.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From versions 3.0.0 to before 3.2.9, 3.3.0 to before 3.3.11, and 3.4.0 to before 3.4.11, there is an integer overflow in ImageChannel::resize that leads to heap OOB write via OpenEXRUtil public API. This issue has been patched in versions 3.2.9, 3.3.11, and 3.4.11.

An issue in OpenImageIO oiio v.2.4.12.0 allows a remote attacker to execute arbitrary code and cause a denial of service via the read_rle_image function of file bifs/unquantize.c

OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.18.0 and 3.1.13.0, sgiinput.cpp:265,274 use OIIO_DASSERT for bounds checking in the RLE decode loop. In release builds, OIIO_DASSERT compiles to ((void)sizeof(x)) (dassert.h:210), making all bounds checks no-ops. A crafted .sgi file with RLE count exceeding scanline width causes heap buffer overflow and crash. This vulnerability is fixed in 3.0.18.0 and 3.1.13.0.

OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.18.0 and 3.1.13.0, a signed integer overflow in QueryRGBBufferSizeInternal() in DPXColorConverter.cpp leads to a heap-based out-of-bounds write when processing crafted DPX image files. The function computes buffer sizes using 32-bit signed integer arithmetic with negative multipliers (e.g., pixels * -3 * bytes for kCbYCr descriptors and pixels * -4 * bytes for kABGR descriptors), where a negative result is used as an in-band signal that no separate buffer is needed. When the pixel count is sufficiently large, the multiplication overflows INT_MIN and wraps to a small positive value. The caller in dpxinput.cpp interprets this positive value as a required buffer size, allocates an undersized heap buffer via m_decodebuf.resize(), and then writes the full image data into it via fread, resulting in a heap buffer overflow. An attacker can exploit this by crafting a DPX file that triggers the overflow, causing a denial of service (crash) or potentially arbitrary code execution through heap corruption in any application that reads pixel data using OpenImageIO. This vulnerability is fixed in 3.0.18.0 and 3.1.13.0.

OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.18.0 and 3.1.13.0, softimageinput.cpp:469 (mixed RLE) and :345 (pure RLE) do not clamp the run length to remaining scanline width before writing pixels. The raw packet path (line 403) correctly clamps with std::min, but RLE paths skip this check. A crafted .pic file causes heap overflow up to 65535 bytes. This vulnerability is fixed in 3.0.18.0 and 3.1.13.0.

Multiple memory corruption vulnerabilities exist in the IFFOutput alignment padding functionality of OpenImageIO Project OpenImageIO v2.4.4.2. A specially crafted ImageOutput Object can lead to arbitrary code execution. An attacker can provide malicious input to trigger these vulnerabilities.This vulnerability arises when the `m_spec.format` is `TypeDesc::UINT16`.

An out-of-bounds write vulnerability exists in the OpenImageIO::add_exif_item_to_spec functionality of OpenImageIO Project OpenImageIO v2.4.4.2. Specially-crafted exif metadata can lead to stack-based memory corruption. An attacker can provide a malicious file to trigger this vulnerability.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From versions 3.0.0 to before 3.2.9, 3.3.0 to before 3.3.11, and 3.4.0 to before 3.4.11, readVariableLengthInteger() decodes a variable-length integer from untrusted EXR input without bounding the shift count. After enough continuation bytes, the code executes a left shift by 70 on a 64-bit value, which is undefined behavior. This issue has been patched in versions 3.2.9, 3.3.11, and 3.4.11.

A heap based buffer overflow vulnerability exists in tile decoding code of TIFF image parser in OpenImageIO master-branch-9aeece7a and v2.3.19.0. A specially-crafted TIFF file can lead to an out of bounds memory corruption, which can result in arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.

A vulnerability was detected in AcademySoftwareFoundation OpenImageIO up to 3.2.0.1-dev. This vulnerability affects unknown code of the file src/dds.imageio/ddsinput.cpp of the component DDS Image Handler. The manipulation results in out-of-bounds write. The attack needs to be approached locally. The exploit is now public and may be used. The patch is identified as 94ec2deec3e3bf2f2e2ff84d008e27425d626fe2. Applying a patch is advised to resolve this issue.

A stack-based buffer overflow vulnerability exists in the TGA file format parser of OpenImageIO v2.3.19.0. A specially-crafted targa file can lead to out of bounds read and write on the process stack, which can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. In versions 3.4.0 through 3.4.9, 3.3.0 through 3.3.9, and 3.2.0 through 3.2.7, `internal_dwa_compressor.h:1040` performs `chan->width * chan->bytes_per_element` in `int32` arithmetic without a `(size_t)` cast. This is the same overflow pattern fixed in other decoders by CVE-2026-34589/34588/34544, but this line was missed. Versions 3.4.10, 3.3.10, and 3.2.8 contain a fix that addresses `internal_dwa_compressor.h:1040`.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. In versions 3.4.0 through 3.4.9, 3.3.0 through 3.3.9, and 3.2.0 through 3.2.7, `internal_dwa_compressor.h:1722` performs `curc->width * curc->height` in `int32` arithmetic without a `(size_t)` cast. This is the same overflow pattern fixed in other locations by the recent CVE-2026-34589 batch, but this line was missed. Versions 3.4.10, 3.3.10, and 3.2.8 contain a fix that addresses `internal_dwa_compressor.h:1722`.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. Versions 3.4.0 through 3.4.9 have a signed integer overflow vulnerability in OpenEXR's HTJ2K (High-Throughput JPEG 2000) decompression path. The `ht_undo_impl()` function in `src/lib/OpenEXRCore/internal_ht.cpp` accumulates a bytes-per-line value (`bpl`) using a 32-bit signed integer with no overflow guard. A crafted EXR file with 16,385 FLOAT channels at the HTJ2K maximum width of 32,767 causes `bpl` to overflow `INT_MAX`, producing undefined behavior confirmed by UBSan. On an allocator-permissive host where the required ~64 GB allocation succeeds, the wrapped negative `bpl` value would subsequently be used as a per-scanline pointer advance, which would produce a heap out-of-bounds write. On a memory-constrained host, the allocation fails before `ht_undo_impl()` is entered. This is the second distinct integer overflow in `ht_undo_impl()`. CVE-2026-34545 addressed a different overflow in the same function — the `int16_t p` pixel-loop counter at line ~302 that overflows when iterating over channels whose `width` exceeds 32,767. The CVE-2026-34545 fix did not touch the `int bpl` accumulator at line 211, which is the subject of this advisory. The `bpl` accumulator was also not addressed by any of the 8 advisories in the 2026-04-05 v3.4.9 release batch. This finding is structurally identical to CVE-2026-34588 (PIZ `wcount*nx` overflow in `internal_piz.c`) and should be remediated with the same pattern. The CVE-2026-34588 fix did not touch `internal_ht.cpp`. Version 3.4.10 contains a remediation that addresses the vulnerability in `internal_ht.cpp`.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From version 3.4.0 to before version 3.4.7, an attacker providing a crafted .exr file with HTJ2K compression and a channel width of 32768 can write controlled data beyond the output heap buffer in any application that decodes EXR images. The write primitive is 2 bytes per overflow iteration or 4 bytes (by another path), repeating for each additional pixel past the overflow point. In this context, a heap write overflow can lead to remote code execution on systems. This issue has been patched in version 3.4.7.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From 3.1.0 to before 3.2.7, 3.3.9, and 3.4.9, internal_exr_undo_piz() advances the working wavelet pointer with signed 32-bit arithmetic. Because nx, ny, and wcount are int, a crafted EXR file can make this product overflow and wrap. The next channel then decodes from an incorrect address. The wavelet decode path operates in place, so this yields both out-of-bounds reads and out-of-bounds writes. This vulnerability is fixed in 3.2.7, 3.3.9, and 3.4.9.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From version 3.4.0 to before version 3.4.8, a crafted B44 or B44A EXR file can cause an out-of-bounds write in any application that decodes it via exr_decoding_run(). Consequences range from immediate crash (most likely) to corruption of adjacent heap allocations (layout-dependent). This issue has been patched in version 3.4.8.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From 3.2.0 to before 3.2.7, 3.3.9, and 3.4.9, the DWA lossy decoder constructs temporary per-component block pointers using signed 32-bit arithmetic. For a large enough width, the calculation overflows and later decoder stores operate on a wrapped pointer outside the allocated rowBlock backing store. This vulnerability is fixed in 3.2.7, 3.3.9, and 3.4.9.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From 3.2.0 to before 3.2.7, 3.3.9, and 3.4.9, a signed integer overflow exists in undo_pxr24_impl() in src/lib/OpenEXRCore/internal_pxr24.c at line 377. The expression (uint64_t)(w * 3) computes w * 3 as a signed 32-bit integer before casting to uint64_t. When w is large, this multiplication constitutes undefined behavior under the C standard. On tested builds (clang/gcc without sanitizers), two's-complement wraparound commonly occurs, and for specific values of w the wrapped result is a small positive integer, which may allow the subsequent bounds check to pass incorrectly. If the check is bypassed, the decoding loop proceeds to write pixel data through dout, potentially extending far beyond the allocated output buffer. This vulnerability is fixed in 3.2.7, 3.3.9, and 3.4.9.

OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.18.0 and 3.1.13.0, jpeg2000input.cpp:395 computes buffer size as const int bufsize = w * h * ch * buffer_bpp using signed 32-bit arithmetic. When the product exceeds INT_MAX, the result wraps to 0 or a small value. m_buf.resize() allocates an undersized buffer, and subsequent pixel write loops cause heap overflow. Conditional on USE_OPENJPH build flag. This vulnerability is fixed in 3.0.18.0 and 3.1.13.0.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From 3.2.0 to before 3.2.7, 3.3.9, and 3.4.9, a misaligned memory write vulnerability exists in LossyDctDecoder_execute() in src/lib/OpenEXRCore/internal_dwa_decoder.h:749. When decoding a DWA or DWAB-compressed EXR file containing a FLOAT-type channel, the decoder performs an in-place HALF→FLOAT conversion by casting an unaligned uint8_t * row pointer to float * and writing through it. Because the row buffer may not be 4-byte aligned, this constitutes undefined behavior under the C standard and crashes immediately on architectures that enforce alignment (ARM, RISC-V, etc.). On x86 it is silently tolerated at runtime but remains exploitable via compiler optimizations that assume aligned access. This vulnerability is fixed in 3.2.7, 3.3.9, and 3.4.9.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From 3.4.0 to before 3.4.9, a missing bounds check on the dataWindow attribute in EXR file headers allows an attacker to trigger a signed integer overflow in generic_unpack(). By setting dataWindow.min.x to a large negative value, OpenEXRCore computes an enormous image width, which is later used in a signed integer multiplication that overflows, causing the process to terminate with SIGILL via UBSan. This vulnerability is fixed in 3.4.9.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. In CompositeDeepScanLine::readPixels, per-pixel totals are accumulated in vector<unsigned int> total_sizes for attacker-controlled large counts across many parts, total_sizes[ptr] wraps modulo 2^32. overall_sample_count is then derived from wrapped totals and used in samples[channel].resize(overall_sample_count). Decode pointer setup/consumption proceeds with true sample counts, and write operations in core unpack (generic_unpack_deep_pointers) overrun the undersized composite sample buffer. This vulnerability is fixed in v3.2.6, v3.3.8, and v3.4.6.

OpenImageIO v3.1.0.0dev was discovered to contain a heap overflow via the component OpenImageIO_v3_1_0::farmhash::inlined::Fetch64(char const*).

OpenImageIO v3.1.0.0dev was discovered to contain a heap overflow via the component /OpenImageIO/fmath.h.

A heap based buffer overflow vulnerability exists in the PSD thumbnail resource parsing code of OpenImageIO 2.3.19.0. A specially-crafted PSD file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.

A code execution vulnerability exists in the DDS scanline parsing functionality of OpenImageIO Project OpenImageIO v2.4.4.2. A specially-crafted .dds can lead to a heap buffer overflow. An attacker can provide a malicious file to trigger this vulnerability.

A heap out-of-bounds write vulnerability exists in the way OpenImageIO v2.3.19.0 processes RLE encoded BMP images. A specially-crafted bmp file can write to arbitrary out of bounds memory, which can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.

A vulnerability was found in OpenImageIO, where a heap buffer overflow exists in the src/gif.imageio/gifinput.cpp file. This flaw allows a remote attacker to pass a specially crafted file to the application, which triggers a heap-based buffer overflow and could cause a crash, leading to a denial of service.

An optimization in WebGL was incorrect in some cases, and could have led to memory corruption and a potentially exploitable crash. *Note*: This advisory was added on December 13th, 2022 after we better understood the impact of the issue. The fix was included in the original release of Firefox 106. This vulnerability affects Firefox < 106, Firefox ESR < 102.6, and Thunderbird < 102.6.

In DGifSlurp of dgif_lib.c, there is a possible out of bounds write due to an integer overflow. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in Safari 14.0. Processing maliciously crafted web content may lead to code execution.

Adobe Framemaker versions 2019.0.4 and below have a buffer error vulnerability. Successful exploitation could lead to arbitrary code execution.

Adobe Framemaker versions 2019.0.4 and below have an out-of-bounds write vulnerability. Successful exploitation could lead to arbitrary code execution.

Windows Routing and Remote Access Service (RRAS) Remote Code Execution Vulnerability

Adobe Framemaker versions 2019.0.4 and below have an out-of-bounds write vulnerability. Successful exploitation could lead to arbitrary code execution.

Adobe Framemaker versions 2019.0.4 and below have a heap overflow vulnerability. Successful exploitation could lead to arbitrary code execution.

A memory corruption issue was addressed with improved validation. This issue is fixed in Safari 13.0.1, iOS 13.1 and iPadOS 13.1, tvOS 13. Processing maliciously crafted web content may lead to arbitrary code execution.

Out of bounds write in V8 in Google Chrome prior to 124.0.6367.207 allowed a remote attacker to perform an out of bounds memory write via a crafted HTML page. (Chromium security severity: High)

Memory safety bugs present in Firefox 125, Firefox ESR 115.10, and Thunderbird 115.10. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox < 126, Firefox ESR < 115.11, and Thunderbird < 115.11.

The issue was addressed with improved memory handling. This issue is fixed in Safari 26.1, iOS 18.7.2 and iPadOS 18.7.2, iOS 26.1 and iPadOS 26.1, macOS Tahoe 26.1, tvOS 26.1, visionOS 26.1, watchOS 26.1. Processing maliciously crafted web content may lead to memory corruption.

A heap buffer overflow vulnerability in msadpcm_decode_block of libsndfile 1.0.30 allows attackers to execute arbitrary code via a crafted WAV file.

The ugeom2d.dll library in all versions of Solid Edge SE2020 before 2020MP14 and all versions of Solid Edge SE2021 before SE2021MP5 lack proper validation of user-supplied data when parsing DFT files. This could result in an out-of-bounds write past the end of an allocated structure. An attacker could leverage this vulnerability to execute code in the context of the current process.

Out of bounds memory access in V8 in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High)

Out of bounds read and write in V8 in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High)

Out of bounds write in WebRTC in Google Chrome prior to 148.0.7778.168 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High)

Out of bounds write in WebRTC in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: Medium)

Out of bounds memory access in DevTools in Google Chrome prior to 136.0.7103.59 allowed a remote attacker who convinced a user to engage in specific UI gestures to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: Medium)

Out of bounds write in Fonts in Google Chrome prior to 148.0.7778.168 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High)