Manage Engine Asset Explorer Agent 1.0.34 listens on port 9000 for incoming commands over HTTPS from Manage Engine Server. The HTTPS certificates are not verified which allows any arbitrary user on the network to send commands over port 9000. While these commands may not be executed (due to authtoken validation), the Asset Explorer agent will reach out to the manage engine server for an HTTP request. During this process, AEAgent.cpp allocates 0x66 bytes using "malloc". This memory is never free-ed in the program, causing a memory leak. Additionally, the instruction sent to aeagent (ie: NEWSCAN, DELTASCAN, etc) is converted to a unicode string, but is never freed. These memory leaks allow a remote attacker to exploit a Denial of Service scenario through repetitively sending these commands to an agent and eventually crashing it the agent due to an out-of-memory condition.

On Juniper Networks SRX Series devices with link aggregation (lag) configured, executing any operation that fetches Aggregated Ethernet (AE) interface statistics, including but not limited to SNMP GET requests, causes a slow kernel memory leak. If all the available memory is consumed, the traffic will be impacted and a reboot might be required. The following log can be seen if this issue happens. /kernel: rt_pfe_veto: Memory over consumed. Op 1 err 12, rtsm_id 0:-1, msg type 72 /kernel: rt_pfe_veto: free kmem_map memory = (20770816) curproc = kmd An administrator can use the following CLI command to monitor the status of memory consumption (ifstat bucket): user@device > show system virtual-memory no-forwarding | match ifstat Type InUse MemUse HighUse Limit Requests Limit Limit Size(s) ifstat 2588977 162708K - 19633958 <<<< user@device > show system virtual-memory no-forwarding | match ifstat Type InUse MemUse HighUse Limit Requests Limit Limit Size(s) ifstat 3021629 189749K - 22914415 <<<< This issue affects Juniper Networks Junos OS on SRX Series: 17.1 versions 17.1R3 and above prior to 17.3R3-S11; 17.4 versions prior to 17.4R3-S5; 18.2 versions prior to 18.2R3-S7, 18.2R3-S8; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R2-S7, 18.4R3-S6; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S6; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R3-S1; 20.1 versions prior to 20.1R2, 20.1R3; 20.2 versions prior to 20.2R2-S2, 20.2R3; 20.3 versions prior to 20.3R1-S2, 20.3R2. This issue does not affect Juniper Networks Junos OS prior to 17.1R3.

On Juniper Networks MX Series and EX9200 Series platforms with Trio-based MPC (Modular Port Concentrator) where Integrated Routing and Bridging (IRB) interface is configured and it is mapped to a VPLS instance or a Bridge-Domain, certain network events at Customer Edge (CE) device may cause memory leak in the MPC which can cause an out of memory and MPC restarts. When this issue occurs, there will be temporary traffic interruption until the MPC is restored. An administrator can use the following CLI command to monitor the status of memory usage level of the MPC: user@device> show system resource-monitor fpc FPC Resource Usage Summary Free Heap Mem Watermark : 20 % Free NH Mem Watermark : 20 % Free Filter Mem Watermark : 20 % * - Watermark reached Slot # % Heap Free RTT Average RTT 1 87 PFE # % ENCAP mem Free % NH mem Free % FW mem Free 0 NA 88 99 1 NA 89 99 When the issue is occurring, the value of “% NH mem Free” will go down until the MPC restarts. This issue affects MX Series and EX9200 Series with Trio-based PFEs (Packet Forwarding Engines). Please refer to https://kb.juniper.net/KB25385 for the list of Trio-based PFEs. This issue affects Juniper Networks Junos OS on MX Series, EX9200 Series: 17.3R3-S8; 17.4R3-S2; 18.2R3-S4, 18.2R3-S5; 18.3R3-S2, 18.3R3-S3; 18.4 versions starting from 18.4R3-S1 and later versions prior to 18.4R3-S6; 19.2 versions starting from 19.2R2 and later versions prior to 19.2R3-S1; 19.4 versions starting from 19.4R2 and later versions prior to 19.4R2-S3, 19.4R3; 20.2 versions starting from 20.2R1 and later versions prior to 20.2R1-S3, 20.2R2. This issue does not affect Juniper Networks Junos OS: 18.1, 19.1, 19.3, 20.1.

There is a memory leak vulnerability in some versions of Huawei CloudEngine product. An unauthenticated, remote attacker may exploit this vulnerability by sending specific message to the affected product. Due to not release the allocated memory properly, successful exploit may cause memory leak.

An ni_dhcp4_fsm_process_dhcp4_packet memory leak in openSUSE wicked 0.6.55 and earlier allows network attackers to cause a denial of service by sending DHCP4 packets with a different client-id.

An ni_dhcp4_parse_response memory leak in openSUSE wicked 0.6.55 and earlier allows network attackers to cause a denial of service by sending DHCP4 packets without a message type option.

A memory leak exists in Palo Alto Networks PAN-OS software that enables an attacker to send a burst of crafted packets through the firewall that eventually prevents the firewall from processing traffic. This issue applies only to PA-5400 Series devices that are running PAN-OS software with the SSL Forward Proxy feature enabled.

An exploitable denial-of-service vulnerability exists in the resource allocation handling of Videolabs libmicrodns 0.1.0. When encountering errors while parsing mDNS messages, some allocated data is not freed, possibly leading to a denial-of-service condition via resource exhaustion. An attacker can send one mDNS message repeatedly to trigger this vulnerability through decoding of the domain name performed by rr_decode.

On BIG-IP 15.0.0-15.0.1, 14.1.0-14.1.2.3, 14.0.0-14.0.1, and 13.1.0-13.1.3.1, when a virtual server is configured with HTTP explicit proxy and has an attached HTTP_PROXY_REQUEST iRule, POST requests sent to the virtual server cause an xdata memory leak.

An exploitable denial-of-service vulnerability exists in the resource allocation handling of Videolabs libmicrodns 0.1.0. When encountering errors while parsing mDNS messages, some allocated data is not freed, possibly leading to a denial-of-service condition via resource exhaustion. An attacker can send one mDNS message repeatedly to trigger this vulnerability through the function rr_read_RR [5] reads the current resource record, except for the RDATA section. This is read by the loop at in rr_read. For each RR type, a different function is called. When the RR type is 0x10, the function rr_read_TXT is called at [6].

A vulnerability in the processing of inbound IPv6 packets in Juniper Networks Junos OS on QFX5000 Series and EX4600 switches may cause the memory to not be freed, leading to a packet DMA memory leak, and eventual Denial of Service (DoS) condition. Once the condition occurs, further packet processing will be impacted, creating a sustained Denial of Service (DoS) condition. The following error logs may be observed using the "show heap" command and the device may eventually run out of memory if such packets are received continuously. Jan 12 12:00:00 device-name fpc0 (buf alloc) failed allocating packet buffer Jan 12 12:00:01 device-name fpc0 (buf alloc) failed allocating packet buffer user@device-name> request pfe execute target fpc0 timeout 30 command "show heap" ID Base Total(b) Free(b) Used(b) % Name -- ---------- ----------- ----------- ----------- --- ----------- 0 246fc1a8 536870488 353653752 183216736 34 Kernel 1 91800000 16777216 12069680 4707536 28 DMA 2 92800000 75497472 69997640 5499832 7 PKT DMA DESC 3 106fc000 335544320 221425960 114118360 34 Bcm_sdk 4 97000000 176160768 200 176160568 99 Packet DMA <<<<<<<<<<<<<< 5 903fffe0 20971504 20971504 0 0 Blob This issue affects Juniper Networks Junos OS on QFX5000 Series, EX4600: 18.3R3 versions prior to 18.3R3-S6; 18.4 versions prior to 18.4R2-S9, 18.4R3-S9; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S8, 19.2R3-S3; 19.3 versions prior to 19.3R2-S7, 19.3R3-S4; 19.4 versions prior to 19.4R2-S5, 19.4R3-S6; 20.1 versions prior to 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2-S1, 21.1R3; 21.2 versions prior to 21.2R1-S1, 21.2R2. This issue does not affect Juniper Networks Junos OS: Any versions prior to 17.4R3; 18.1 versions prior to 18.1R3-S6; 18.2 versions prior to 18.2R3; 18.3 versions prior to 18.3R3; 18.4 versions prior to 18.4R2; 19.1 versions prior to 19.1R2.

Adobe Acrobat and Reader versions 2019.021.20061 and earlier, 2017.011.30156 and earlier, 2017.011.30156 and earlier, and 2015.006.30508 and earlier have a stack exhaustion vulnerability. Successful exploitation could lead to memory leak .

IBM MQ, IBM MQ Appliance, IBM MQ for HPE NonStop 8.0, 9.1 CD, and 9.1 LTS could allow an attacker to cause a denial of service due to a memory leak caused by an error creating a dynamic queue. IBM X-Force ID: 179080.

Potential memory leak in modem during the processing of NSA RRC Reconfiguration with invalid Radio Bearer Config in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Mobile

Adobe Acrobat and Reader versions 2019.021.20061 and earlier, 2017.011.30156 and earlier, 2017.011.30156 and earlier, and 2015.006.30508 and earlier have a stack exhaustion vulnerability. Successful exploitation could lead to memory leak .

An issue was discovered in the simple-slab crate before 0.3.3 for Rust. remove() has an off-by-one error, causing memory leakage and a drop of uninitialized memory.

A Missing Release of Memory after Effective Lifetime vulnerability in the kernel of Juniper Networks Junos OS allows an unauthenticated network based attacker to cause a Denial of Service (DoS). On all Junos platforms, the Kernel Routing Table (KRT) queue can get stuck due to a memory leak triggered by interface flaps or route churn leading to RIB and PFEs getting out of sync. The memory leak causes RTNEXTHOP/route and next-hop memory pressure issue and the KRT queue will eventually get stuck with the error- 'ENOMEM -- Cannot allocate memory'. The out-of-sync state between RIB and FIB can be seen with the "show route" and "show route forwarding-table" command. This issue will lead to failures for adding new routes. The KRT queue status can be checked using the CLI command "show krt queue": user@host > show krt state High-priority add queue: 1 queued ADD nhtype Router index 0 (31212) error 'ENOMEM -- Cannot allocate memory' kqp '0x8ad5e40' The following messages will be observed in /var/log/messages, which indicate high memory for routes/nexthops: host rpd[16279]: RPD_RT_HWM_NOTICE: New RIB highwatermark for routes: 266 [2022-03-04 05:06:07] host rpd[16279]: RPD_KRT_Q_RETRIES: nexthop ADD: Cannot allocate memory host rpd[16279]: RPD_KRT_Q_RETRIES: nexthop ADD: Cannot allocate memory host kernel: rts_veto_net_delayed_unref_limit: Route/nexthop memory is severe pressure. User Application to perform recovery actions. O p 8 err 12, rtsm_id 0:-1, msg type 10, veto simulation: 0. host kernel: rts_veto_net_delayed_unref_limit: Memory usage of M_RTNEXTHOP type = (806321208) Max size possible for M_RTNEXTHOP type = (689432176) Current delayed unref = (0), Max delayed unref on this platform = (120000) Current delayed weight unref = (0) Max delayed weight unref on this platform = (400000) curproc = rpd. This issue affects: Juniper Networks Junos OS 21.2 versions prior to 21.2R3; 21.3 versions prior to 21.3R2-S1, 21.3R3; 21.4 versions prior to 21.4R1-S2, 21.4R2; This issue does not affect Juniper Networks Junos OS versions prior to 21.2R1.

smtpd/table.c in OpenSMTPD before 6.8.0p1 lacks a certain regfree, which might allow attackers to trigger a "very significant" memory leak via messages to an instance that performs many regex lookups.

A flaw was found in Privoxy in versions before 3.0.29. Memory leaks when a response is buffered and the buffer limit is reached or Privoxy is running out of memory can lead to a system crash.

A vulnerability in the Open Shortest Path First (OSPF) implementation in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a memory leak on an affected device. The vulnerability is due to incorrect processing of certain OSPF packets. An attacker could exploit this vulnerability by sending a series of crafted OSPF packets to be processed by an affected device. A successful exploit could allow the attacker to continuously consume memory on an affected device and eventually cause it to reload, resulting in a denial of service (DoS) condition.

IBM Sterling External Authentication Server and IBM Sterling Secure Proxy 6.0.3.0, 6.0.2.0, and 3.4.3.2 could allow a remote user to consume resources causing a denial of service due to a resource leak. IBM X-Force ID: 219395.

Memory leak in IPv6Param::setAddress in CloudAvid PParam 1.3.1.

libLAS 1.8.1 contains a memory leak vulnerability in /libLAS/apps/ts2las.cpp.

In Amazon AWS Firecracker before 0.21.3, and 0.22.x before 0.22.1, the serial console buffer can grow its memory usage without limit when data is sent to the standard input. This can result in a memory leak on the microVM emulation thread, possibly occupying more memory than intended on the host.

On April 20, 2022, the following vulnerability in the ClamAV scanning library versions 0.103.5 and earlier and 0.104.2 and earlier was disclosed: A vulnerability in HTML file parser of Clam AntiVirus (ClamAV) versions 0.104.0 through 0.104.2 and LTS version 0.103.5 and prior versions could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. For a description of this vulnerability, see the ClamAV blog. This advisory will be updated as additional information becomes available.

In certain configurations on version 13.1.3.4, when a BIG-IP AFM HTTP security profile is applied to a virtual server and the BIG-IP system receives a request with specific characteristics, the connection is reset and the Traffic Management Microkernel (TMM) leaks memory.

A memory leak flaw was found in WildFly OpenSSL in versions prior to 1.1.3.Final, where it removes an HTTP session. It may allow the attacker to cause OOM leading to a denial of service. The highest threat from this vulnerability is to system availability.

A memory leak vulnerability was found in Linux kernel in llcp_sock_connect

An issue was discovered in the sized-chunks crate through 0.6.2 for Rust. In the Chunk implementation, insert_from can have a memory-safety issue upon a panic.

A memory leak vulnerability in sim-organizer.c of AlienVault Ossim v5 causes a denial of service (DOS) via a system crash triggered by the occurrence of a large number of alarm events.

A buffer overflow in Mikrotik RouterOS 6.47 allows unauthenticated attackers to cause a denial of service (DOS) via crafted SMB requests.

rudp v0.6 was discovered to contain a memory leak in the component main.c.

Denial of Service issue in FFmpeg 4.2 due to resource management errors via fftools/cmdutils.c.

Huawei NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00; Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, V500R001C60SPC500, and V500R005C00 have a memory leak vulnerability. The software does not sufficiently track and release allocated memory while parse certain message, the attacker sends the message continuously that could consume remaining memory. Successful exploit could cause memory exhaust.

<p>A denial of service vulnerability exists in Microsoft Outlook software when the software fails to properly handle objects in memory. An attacker who successfully exploited the vulnerability could cause a remote denial of service against a system.</p> <p>Exploitation of the vulnerability requires that a specially crafted email be sent to a vulnerable Outlook server.</p> <p>The security update addresses the vulnerability by correcting how Microsoft Outlook handles objects in memory.</p>

A flaw was found in JBoss-client. The vulnerability occurs due to a memory leak on the JBoss client-side, when using UserTransaction repeatedly and leads to information leakage vulnerability.

On Juniper Networks Junos OS devices, a specific SNMP OID poll causes a memory leak which over time leads to a kernel crash (vmcore). Prior to the kernel crash other processes might be impacted, such as failure to establish SSH connection to the device. The administrator can monitor the output of the following command to check if there is memory leak caused by this issue: user@device> show system virtual-memory | match "pfe_ipc|kmem" pfe_ipc 147 5K - 164352 16,32,64,8192 <-- increasing vm.kmem_map_free: 127246336 <-- decreasing pfe_ipc 0 0K - 18598 32,8192 vm.kmem_map_free: 134582272 This issue affects Juniper Networks Junos OS: 17.4R3; 18.1 version 18.1R3-S5 and later versions prior to 18.1R3-S10; 18.2 version 18.2R3 and later versions prior to 18.2R3-S3; 18.2X75 version 18.2X75-D420, 18.2X75-D50 and later versions prior to 18.2X75-D430, 18.2X75-D53, 18.2X75-D60; 18.3 version 18.3R3 and later versions prior to 18.3R3-S2; 18.4 version 18.4R1-S4, 18.4R2 and later versions prior to 18.4R2-S5, 18.4R3-S1; 19.1 version 19.1R2 and later versions prior to 19.1R2-S2, 19.1R3; 19.2 version 19.2R1 and later versions prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R2-S5, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2. This issue does not affect Juniper Networks Junos OS prior to 17.4R3.

Memory leak in icmp6 implementation in Linux Kernel 5.13+ allows a remote attacker to DoS a host by making it go out-of-memory via icmp6 packets of type 130 or 131. We recommend upgrading past commit 2d3916f3189172d5c69d33065c3c21119fe539fc.

In the Linux kernel, the following vulnerability has been resolved: can: m_can: m_can_read_fifo: fix memory leak in error branch In m_can_read_fifo(), if the second call to m_can_fifo_read() fails, the function jump to the out_fail label and returns without calling m_can_receive_skb(). This means that the skb previously allocated by alloc_can_skb() is not freed. In other terms, this is a memory leak. This patch adds a goto label to destroy the skb if an error occurs. Issue was found with GCC -fanalyzer, please follow the link below for details.

Moxa TN-5900 v3.1 series routers, MGate 5109 v2.2 series protocol gateways, and MGate 5101-PBM-MN v2.1 series protocol gateways were discovered to contain a memory leak which allows attackers to cause a Denial of Service (DoS) via crafted packets.

A vulnerability was found in Privoxy which was fixed in get_url_spec_param() by freeing memory of compiled pattern spec before bailing.

A vulnerability was found in Privoxy which was fixed in process_encrypted_request_headers() by freeing header memory when failing to get the request destination.

Memory leaks were discovered in the CoAP library in Arm Mbed OS 5.15.3 when using the Arm mbed-coap library 5.1.5. The CoAP parser is responsible for parsing received CoAP packets. The function sn_coap_parser_options_parse() parses the CoAP option number field of all options present in the input packet. Each option number is calculated as a sum of the previous option number and a delta of the current option. The delta and the previous option number are expressed as unsigned 16-bit integers. Due to lack of overflow detection, it is possible to craft a packet that wraps the option number around and results in the same option number being processed again in a single packet. Certain options allocate memory by calling a memory allocation function. In the cases of COAP_OPTION_URI_QUERY, COAP_OPTION_URI_PATH, COAP_OPTION_LOCATION_QUERY, and COAP_OPTION_ETAG, there is no check on whether memory has already been allocated, which in conjunction with the option number integer overflow may lead to multiple assignments of allocated memory to a single pointer. This has been demonstrated to lead to memory leak by buffer orphaning. As a result, the memory is never freed.

An h2c direct connection to Apache Tomcat 10.0.0-M1 to 10.0.0-M6, 9.0.0.M5 to 9.0.36 and 8.5.1 to 8.5.56 did not release the HTTP/1.1 processor after the upgrade to HTTP/2. If a sufficient number of such requests were made, an OutOfMemoryException could occur leading to a denial of service.

A memory leak vulnerability was found in Privoxy when handling errors.

A memory leak in the TFTP service in B&R Automation Runtime versions <N4.26, <N4.34, <F4.45, <E4.53, <D4.63, <A4.73 and prior could allow an unauthenticated attacker with network access to cause a denial of service (DoS) condition.

Envoy version 1.14.2, 1.13.2, 1.12.4 or earlier is susceptible to increased memory usage in the case where an HTTP/2 client requests a large payload but does not send enough window updates to consume the entire stream and does not reset the stream.

Denial of service while processing RTCP packets containing multiple SDES reports due to memory for last SDES packet is freed and rest of the memory is leaked in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Wearables