An attacker can craft and send an OpenNamespace message to port 4241 with valid session-id that triggers an unhandled exception in CFTLDManager::HandleRequest function in RnaDaSvr.dll, resulting in process termination. Observed in FactoryTalk Linx 6.11. All versions of FactoryTalk Linx are affected.

Reactor Netty HttpServer, versions 0.9.3 and 0.9.4, is exposed to a URISyntaxException that causes the connection to be closed prematurely instead of producing a 400 response.

Specifically crafted SCMI messages sent to an SCP running SCP-Firmware release versions up to and including 2.15.0 may lead to a Usage Fault and crash the SCP

The restify-paginate package 0.0.5 for Node.js allows remote attackers to cause a Denial-of-Service by omitting the HTTP Host header. A Restify-based web service would crash with an uncaught exception.

A flaw was found in darkhttpd. Invalid error handling allows remote attackers to cause denial-of-service by accessing a file with a large modification date. The highest threat from this vulnerability is to system availability.

Improper Handling of Exceptional Conditions vulnerability in Daurnimator lua-http library allows Excessive Allocation and a denial of service (DoS) attack to be executed by sending a properly crafted request to the server. Such a request causes the program to enter an infinite loop. This issue affects lua-http: all versions before commit ddab283.

Platform mechanism AutoIP allows remote attackers to reboot the device via a crafted packet in SICK AG solutions Bulkscan LMS111, Bulkscan LMS511, CLV62x – CLV65x, ICR890-3, LMS10x, LMS11x, LMS15x, LMS12x, LMS13x, LMS14x, LMS5xx, LMS53x, MSC800, RFH.

A flaw was found in Squid. The limits applied for validation of HTTP response headers are applied before caching. However, Squid may grow a cached HTTP response header beyond the configured maximum size, causing a stall or crash of the worker process when a large header is retrieved from the disk cache, resulting in a denial of service.

Meshtastic device firmware is a firmware for meshtastic devices to run an open source, off-grid, decentralized, mesh network built to run on affordable, low-power devices. Meshtastic device firmware is subject to a denial of serivce vulnerability in MQTT handling, fixed in version 2.4.1 of the Meshtastic firmware and on the Meshtastic public MQTT Broker. It's strongly suggested that all users of Meshtastic, particularly those that connect to a privately hosted MQTT server, update to this or a more recent stable version right away. There are no known workarounds for this vulnerability.

When an attacker sends a specific crafted Ethernet Operation, Administration, and Maintenance (Ethernet OAM) packet to a target device, it may improperly handle the incoming malformed data and fail to sanitize this incoming data resulting in an overflow condition. This overflow condition in Juniper Networks Junos OS allows an attacker to cause a Denial of Service (DoS) condition by coring the CFM daemon. Continued receipt of these packets may cause an extended Denial of Service condition. This issue affects: Juniper Networks Junos OS 12.3 versions prior to 12.3R12-S15; 12.3X48 versions prior to 12.3X48-D95 on SRX Series; 14.1X50 versions prior to 14.1X50-D145; 14.1X53 versions prior to 14.1X53-D47; 15.1 versions prior to 15.1R2; 15.1X49 versions prior to 15.1X49-D170 on SRX Series; 15.1X53 versions prior to 15.1X53-D67.

It was identified that malformed scripts used in the script processor of an Ingest Pipeline could cause an Elasticsearch node to crash when calling the Simulate Pipeline API.

An issue was discovered in MoscaJS Aedes 0.42.0. lib/write.js does not properly consider exceptions during the writing of an invalid packet to a stream.

RRC sends a connection establishment success to NAS even though connection setup validation returns failure and leads to denial of service in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Mobile

An Improper Handling of Exceptional Conditions vulnerability in the Routing Protocol Daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows an attacker sending a specific malformed BGP update message to cause the session to reset, resulting in a Denial of Service (DoS). Continued receipt and processing of these malformed BGP update messages will create a sustained Denial of Service (DoS) condition. Upon receipt of a BGP update message over an established BGP session containing a specifically malformed tunnel encapsulation attribute, when segment routing is enabled, internal processing of the malformed attributes within the update results in improper parsing of remaining attributes, leading to session reset: BGP SEND Notification code 3 (Update Message Error) subcode 1 (invalid attribute list) Only systems with segment routing enabled are vulnerable to this issue. This issue affects eBGP and iBGP, in both IPv4 and IPv6 implementations, and requires a remote attacker to have at least one established BGP session. This issue affects: Junos OS: * All versions before 21.4R3-S8, * from 22.2 before 22.2R3-S4, * from 22.3 before 22.3R3-S3, * from 22.4 before 22.4R3-S3, * from 23.2 before 23.2R2-S1, * from 23.4 before 23.4R1-S2, 23.4R2. Junos OS Evolved:  * All versions before 21.4R3-S8-EVO, * from 22.2-EVO before 22.2R3-S4-EVO, * from 22.3-EVO before 22.3R3-S3-EVO, * from 22.4-EVO before 22.4R3-S3-EVO, * from 23.2-EVO before 23.2R2-S1-EVO, * from 23.4-EVO before 23.4R1-S2-EVO, 23.4R2-EVO.

An issue was discovered in Zammad 3.0 through 3.2. The WebSocket server crashes when messages in non-JSON format are sent by an attacker. The message format is not properly checked and parsing errors not handled. This leads to a crash of the service process.

The XMLTooling library all versions prior to V3.0.4, provided with the OpenSAML and Shibboleth Service Provider software, contains an XML parsing class. Invalid data in the XML declaration causes an exception of a type that was not handled properly in the parser class and propagates an unexpected exception type.

ReVanced API proxies requests needed to feed the ReVanced Manager and website with data. Up to and including commit 71f81f7f20cd26fd707335bca9838fa3e7df20d2, ReVanced API lacks error caching causing rate limit to be triggered thus increasing server load. This causes a denial of service for all users using the API. It is recommended to implement proper error caching.

An uncaught exception vulnerability exists in Control ID IDSecure 4.7.26.0 and prior, allowing attackers to cause the main web server of IDSecure to fault and crash, causing a denial of service.

Improper Handling of Exceptional Conditions, Uncontrolled Resource Consumption vulnerability in Apache Tomcat. When processing an HTTP/2 stream, Tomcat did not handle some cases of excessive HTTP headers correctly. This led to a miscounting of active HTTP/2 streams which in turn led to the use of an incorrect infinite timeout which allowed connections to remain open which should have been closed. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.0-M20, from 10.1.0-M1 through 10.1.24, from 9.0.0-M1 through 9.0.89. The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.0 though 8.5.100. Other EOL versions may also be affected. Users are recommended to upgrade to version 11.0.0-M21, 10.1.25 or 9.0.90, which fixes the issue.

An issue was discovered in 3S-Smart CODESYS before 3.5.15.0 . Crafted network packets cause the Control Runtime to crash.

A CWE-248: Uncaught Exception vulnerability exists in Modicon M580 (firmware version prior to V2.90) and Modicon M340 (firmware version prior to V3.10), which could cause a possible denial of service when writing to specific memory addresses in the controller over Modbus.

A vulnerability has been identified in SIMATIC CP 443-1 OPC UA (All versions), SIMATIC ET 200SP Open Controller CPU 1515SP PC2 (incl. SIPLUS variants) (All versions < V2.7), SIMATIC HMI Comfort Outdoor Panels 7" & 15" (incl. SIPLUS variants) (All versions < V15.1 Upd 4), SIMATIC HMI Comfort Panels 4" - 22" (incl. SIPLUS variants) (All versions < V15.1 Upd 4), SIMATIC HMI KTP Mobile Panels KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V15.1 Upd 4), SIMATIC IPC DiagMonitor (All versions < V5.1.3), SIMATIC NET PC Software V13 (All versions), SIMATIC NET PC Software V14 (All versions < V14 SP1 Update 14), SIMATIC NET PC Software V15 (All versions), SIMATIC RF188C (All versions < V1.1.0), SIMATIC RF600R family (All versions < V3.2.1), SIMATIC S7-1500 CPU family (incl. related ET200 CPUs and SIPLUS variants) (All versions >= V2.5 < V2.6.1), SIMATIC S7-1500 Software Controller (All versions between V2.5 (including) and V2.7 (excluding)), SIMATIC WinCC OA (All versions < V3.15 P018), SIMATIC WinCC Runtime Advanced (All versions < V15.1 Upd 4), SINEC NMS (All versions < V1.0 SP1), SINEMA Server (All versions < V14 SP2), SINUMERIK OPC UA Server (All versions < V2.1), TeleControl Server Basic (All versions < V3.1.1). Specially crafted network packets sent to affected devices on port 4840/tcp could allow an unauthenticated remote attacker to cause a denial of service condition of the OPC communication or crash the device. The security vulnerability could be exploited by an attacker with network access to the affected systems. Successful exploitation requires no system privileges and no user interaction. An attacker could use the vulnerability to compromise availability of the OPC communication.

A CWE-248: Uncaught Exception vulnerability exists in all versions of the Modicon M580, Modicon M340, Modicon Quantum, and Modicon Premium which could cause a possible denial of service when writing sensitive application variables to the controller over Modbus.

A CWE-248: Uncaught Exception vulnerability exists in Modicon M580 (firmware versions prior to V2.90), Modicon M340 (firmware versions prior to V3.10), Modicon Premium (all versions), Modicon Quantum (all versions), which could cause a possible denial of service when reading invalid data from the controller.

A CWE-248: Uncaught Exception vulnerability exists Modicon M580 (firmware version prior to V2.90), Modicon M340 (firmware version prior to V3.10), Modicon Premium (all versions), and Modicon Quantum (all versions), which could cause a possible denial of service when reading specific coils and registers in the controller over Modbus.

AVEVA PI Server versions 2023 and 2018 SP3 P05 and prior contain a vulnerability that could allow an unauthenticated user to remotely crash the PI Message Subsystem of a PI Server, resulting in a denial-of-service condition.

Traefik is an HTTP reverse proxy and load balancer. In affected versions sending a GET request to any Traefik endpoint with the "Content-length" request header results in an indefinite hang with the default configuration. This vulnerability can be exploited by attackers to induce a denial of service. This vulnerability has been addressed in version 2.11.2 and 3.0.0-rc5. Users are advised to upgrade. For affected versions, this vulnerability can be mitigated by configuring the readTimeout option.

octokit/webhooks is a GitHub webhook events toolset for Node.js. Starting in 9.26.0 and prior to 9.26.3, 10.9.2, 11.1.2, and 12.0.4, there is a problem caused by an issue with error handling in the @octokit/webhooks library because the error can be undefined in some cases. The resulting request was found to cause an uncaught exception that ends the nodejs process. The bug is fixed in octokit/webhooks.js 9.26.3, 10.9.2, 11.1.2, and 12.0.4, app.js 14.02, octokit.js 3.1.2, and Protobot 12.3.3.

In a rare scenario, Check Point R80.30 Security Gateway before JHF Take 50 managed by Check Point R80.30 Management crashes with a unique configuration of enhanced logging.

Envoy is a high-performance edge/middle/service proxy. Envoy crashes in Proxy protocol when using an address type that isn’t supported by the OS. Envoy is susceptible to crashing on a host with IPv6 disabled and a listener config with proxy protocol enabled when it receives a request where the client presents its IPv6 address. It is valid for a client to present its IPv6 address to a target server even though the whole chain is connected via IPv4. This issue has been addressed in released 1.29.1, 1.28.1, 1.27.3, and 1.26.7. Users are advised to upgrade. There are no known workarounds for this vulnerability.

VP9 in libvpx before 1.13.1 mishandles widths, leading to a crash related to encoding.

When IPSec is configured on a Virtual Server, undisclosed traffic can cause TMM to terminate.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

In certain conditions for Calico Typha (v3.26.2, v3.25.1 and below), and Calico Enterprise Typha (v3.17.1, v3.16.3, v3.15.3 and below), a client TLS handshake can block the Calico Typha server indefinitely, resulting in denial of service. The TLS Handshake() call is performed inside the main server handle for loop without any timeout allowing an unclean TLS handshake to block the main loop indefinitely while other connections will be idle waiting for that handshake to finish.

An uncaught exception issue discovered in Softing OPC UA C++ SDK before 6.30 for Windows operating system may cause the application to crash when the server wants to send an error packet, while socket is blocked on writing.

The Apollo Router is a configurable, high-performance graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. Affected versions are subject to a Denial-of-Service (DoS) type vulnerability which causes the Router to panic and terminate when GraphQL Subscriptions are enabled. It can be triggered when **all of the following conditions are met**: 1. Running Apollo Router v1.28.0, v1.28.1 or v1.29.0 ("impacted versions"); **and** 2. The Supergraph schema provided to the Router (either via Apollo Uplink or explicitly via other configuration) **has a `subscription` type** with root-fields defined; **and** 3. The YAML configuration provided to the Router **has subscriptions enabled** (they are _disabled_ by default), either by setting `enabled: true` _or_ by setting a valid `mode` within the `subscriptions` object (as seen in [subscriptions' documentation](https://www.apollographql.com/docs/router/executing-operations/subscription-support/#router-setup)); **and** 4. An [anonymous](https://spec.graphql.org/draft/#sec-Anonymous-Operation-Definitions) (i.e., un-named) `subscription` operation (e.g., `subscription { ... }`) is received by the Router If **all four** of these criteria are met, the impacted versions will panic and terminate. There is no data-privacy risk or sensitive-information exposure aspect to this vulnerability. This is fixed in Apollo Router v1.29.1. Users are advised to upgrade. Updating to v1.29.1 should be a clear and simple upgrade path for those running impacted versions. However, if Subscriptions are **not** necessary for your Graph – but are enabled via configuration — then disabling subscriptions is another option to mitigate the risk.

In Progress MOVEit Transfer before 2021.0.9 (13.0.9), 2021.1.7 (13.1.7), 2022.0.7 (14.0.7), 2022.1.8 (14.1.8), and 2023.0.4 (15.0.4), it is possible for an attacker to invoke a method that results in an unhandled exception. Triggering this workflow can cause the MOVEit Transfer application to terminate unexpectedly.

Legacy C++ Facebook Thrift servers (using cpp instead of cpp2) would not error upon receiving messages with containers of fields of unknown type. As a result, malicious clients could send short messages which would take a long time for the server to parse, potentially leading to denial of service. This issue affects Facebook Thrift prior to v2019.05.06.00.

C++ Facebook Thrift servers (using cpp2) would not error upon receiving messages with containers of fields of unknown type. As a result, malicious clients could send short messages which would take a long time for the server to parse, potentially leading to denial of service. This issue affects Facebook Thrift prior to v2019.02.18.00.

Java Facebook Thrift servers would not error upon receiving messages with containers of fields of unknown type. As a result, malicious clients could send short messages which would take a long time for the server to parse, potentially leading to denial of service. This issue affects Facebook Thrift prior to v2019.02.18.00.

selectExpander in select.c in SQLite 3.30.1 proceeds with WITH stack unwinding even after a parsing error.

buf_pullup in Tor before 0.2.4.26 and 0.2.5.x before 0.2.5.11 does not properly handle unexpected arrival times of buffers with invalid layouts, which allows remote attackers to cause a denial of service (assertion failure and daemon exit) via crafted packets.

An issue was discovered in Open Network Operating System (ONOS) 1.14. In the access control application (org.onosproject.acl), the host event listener does not handle the following event types: HOST_REMOVED. In combination with other applications, this could lead to the absence of intended code execution.

An issue was discovered in Open Network Operating System (ONOS) 1.14. In the Ethernet VPN application (org.onosproject.evpnopenflow), the host event listener does not handle the following event types: HOST_MOVED, HOST_UPDATED. In combination with other applications, this could lead to the absence of intended code execution.

An issue was discovered in Open Network Operating System (ONOS) 1.14. In the mobility application (org.onosproject.mobility), the host event listener does not handle the following event types: HOST_ADDED, HOST_REMOVED, HOST_UPDATED. In combination with other applications, this could lead to the absence of intended code execution.

Unhandled exception in Intel(R) Baseboard Management Controller firmware may allow an unauthenticated user to potentially enable denial of service via network access.

A flaw was found in the Ceph RGW configuration with Beast as the front end handling client requests. An unauthenticated attacker could crash the Ceph RGW server by sending valid HTTP headers and terminating the connection, resulting in a remote denial of service for Ceph RGW clients.

The flowd process, responsible for forwarding traffic in SRX Series services gateways, may crash and restart when processing specific transit IP packets through an IPSec tunnel. Continued processing of these packets may result in an extended Denial of Service (DoS) condition. This issue only occurs when IPSec tunnels are configured. Systems without IPSec tunnel configurations are not vulnerable to this issue. This issue affects Juniper Networks Junos OS: 15.1X49 versions prior to 15.1X49-D171, 15.1X49-D180 on SRX Series; 18.2 versions 18.2R2-S1 and later, prior to 18.2R3 on SRX Series; 18.4 versions prior to 18.4R2 on SRX Series.

An Improper Handling of Exceptional Conditions vulnerability in AS PATH processing of Juniper Networks Junos OS and Junos OS Evolved allows an attacker to send a BGP update message with an AS PATH containing a large number of 4-byte ASes, leading to a Denial of Service (DoS). Continued receipt and processing of these BGP updates will create a sustained Denial of Service (DoS) condition. This issue is hit when the router has Non-Stop Routing (NSR) enabled, has a non-4-byte-AS capable BGP neighbor, receives a BGP update message with a prefix that includes a long AS PATH containing large number of 4-byte ASes, and has to advertise the prefix towards the non-4-byte-AS capable BGP neighbor. Note: NSR is not supported on the SRX Series and is therefore not affected by this vulnerability. This issue affects: Juniper Networks Junos OS: * All versions prior to 20.4R3-S8; * 21.1 versions 21.1R1 and later; * 21.2 versions prior to 21.2R3-S6; * 21.3 versions prior to 21.3R3-S5; * 21.4 versions prior to 21.4R3-S5; * 22.1 versions prior to 22.1R3-S4; * 22.2 versions prior to 22.2R3-S2; * 22.3 versions prior to 22.3R2-S2, 22.3R3-S1; * 22.4 versions prior to 22.4R2-S1, 22.4R3. Juniper Networks Junos OS Evolved * All versions prior to 20.4R3-S8-EVO; * 21.1 versions 21.1R1-EVO and later; * 21.2 versions prior to 21.2R3-S6-EVO; * 21.3 versions prior to 21.3R3-S5-EVO; * 21.4 versions prior to 21.4R3-S5-EVO; * 22.1 versions prior to 22.1R3-S4-EVO; * 22.2 versions prior to 22.2R3-S2-EVO; * 22.3 versions prior to 22.3R2-S2-EVO, 22.3R3-S1-EVO; * 22.4 versions prior to 22.4R2-S1-EVO, 22.4R3-EVO.