Beeline Smart Box 2.0.38 routers allow "Advanced settings > Other > Diagnostics" OS command injection via the Ping ping_ipaddr parameter, the Nslookup nslookup_ipaddr parameter, or the Traceroute traceroute_ipaddr parameter.

ASUS RT-AX55’s authentication-related function has a vulnerability of insufficient filtering of special characters within its code-authentication module. An authenticated remote attacker can exploit this vulnerability to perform a Command Injection attack to execute arbitrary commands, disrupt the system or terminate services.

An authenticated command injection vulnerability exists in the HPE Aruba Networking EdgeConnect SD-WAN gateways Command Line Interface. Successful exploitation of this vulnerability results in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

IntelMQ Manager from version 1.1.0 and before version 2.1.1 has a vulnerability where the backend incorrectly handled messages given by user-input in the "send" functionality of the Inspect-tool of the Monitor component. An attacker with access to the IntelMQ Manager could possibly use this issue to execute arbitrary code with the privileges of the webserver. Version 2.1.1 fixes the vulnerability.

BrainyCP 1.0 contains an authenticated remote code execution vulnerability that allows logged-in users to inject arbitrary commands through the crontab configuration interface. Attackers can exploit the crontab endpoint by adding a malicious command that spawns a reverse shell to a specified IP and port.

An issue was discovered in Titan SpamTitan 7.07. Improper validation of the parameter fname on the page certs-x.php would allow an attacker to execute remote code on the target server. The user has to be authenticated before interacting with this page.

WFS-SR03 v1.0.3 was discovered to contain a command injection vulnerability via the sys_smb_pwdmod function.

Brandon Rothel from QED Secure Solutions and Sam Hanson of Dragos have found that the VAPIX API tcptest.cgi did not have a sufficient input validation allowing for a possible remote code execution. This flaw can only be exploited after authenticating with an operator- or administrator-privileged service account. The impact of exploiting this vulnerability is lower with operator-privileges compared to administrator-privileges service accounts. Please refer to the Axis security advisory for more information and solution.

WebAccess/NMS (versions prior to 3.0.2) does not properly sanitize user input and may allow an attacker to inject system commands remotely.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Honeywell MB-Secure allows Privilege Abuse. This issue affects MB-Secure: from V11.04 before V12.53 and MB-Secure PRO from V01.06 before V03.09.Honeywell also recommends updating to the most recent version of this product.

The /admin/admapi.php script of Invigo Automatic Device Management (ADM) through 5.0 allows remote authenticated attackers to execute arbitrary OS commands on the server as the user running the application.

lib/ajaxHandlers/ajaxAddTemplate.php in rConfig through 3.94 allows remote attackers to execute arbitrary OS commands via shell metacharacters in the fileName POST parameter.

The improper neutralization of special elements in the CGI program of the Zyxel NAS326 firmware version V5.21(AAZF.14)C0 and NAS542 firmware version V5.21(ABAG.11)C0 could allow an authenticated attacker to execute some operating system (OS) commands by sending a crafted URL to a vulnerable device.

IBM Aspera Orchestrator 4.0.1 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 260116.

An issue was discovered in Froxlor before 0.10.14. Remote attackers with access to the installation routine could have executed arbitrary code via the database configuration options that were passed unescaped to exec, because of _backupExistingDatabase in install/lib/class.FroxlorInstall.php.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the dns_query_name parameter in a dns_query.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the date parameter in a system_time.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected.

In PHOENIX CONTACTs WP 6xxx series web panels in versions prior to 4.0.10 a remote attacker with low privileges may use a specific HTTP POST releated to certificate operations to gain full access to the device.

Vesta Control Panel (VestaCP) 0.9.7 through 0.9.8-23 is vulnerable to an authenticated command execution that can result in remote root access on the server. The platform works with PHP as the frontend language and uses shell scripts to execute system actions. PHP executes shell script through the dangerous command exec. This function can be dangerous if arguments passed to it are not filtered. Every user input in VestaCP that is used as an argument is filtered with the escapeshellarg function. This function comes from the PHP library directly and its description is as follows: "escapeshellarg() adds single quotes around a string and quotes/escapes any existing single quotes allowing you to pass a string directly to a shell function and having it be treated as a single safe argument." It means that if you give Username, it will have 'Username' as a replacement. This works well and protects users from exploiting this potentially dangerous exec function. Unfortunately, VestaCP uses this escapeshellarg function incorrectly in several places.

Improper input validation in the Zoom Desktop Client for Windows before version 5.15.0 may allow an unauthorized user to enable an escalation of privilege via network access.

FutureNet NXR series, VXR series and WXR series provided by Century Systems Co., Ltd. contain an active debug code vulnerability. If a user who knows how to use the debug function logs in to the product, the debug function may be used and an arbitrary OS command may be executed.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWLM version 8.6.0 through 8.6.5 and 8.5.0 through 8.5.4 allows attacker to execute unauthorized code or commands via specifically crafted HTTP get request parameters.

aaPanel through 6.6.6 allows remote authenticated users to execute arbitrary commands via shell metacharacters in a modified /system?action=ServiceAdmin request (start, stop, or restart) to the setting menu of Sotfware Store.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetQoSSettings API function, as demonstrated by shell metacharacters in the IPAddress field.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetSysEmailSettings API function, as demonstrated by shell metacharacters in the SMTPServerPort field.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetIPv4FirewallSettings API function, as demonstrated by shell metacharacters in the SrcIPv4AddressRangeStart field.

An OS Command injection vulnerability exists in Suprema BioStar 2 before V2.9.1, which allows authenticated users to execute arbitrary OS commands on the BioStar 2 server.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetIPv6FirewallSettings API function, as demonstrated by shell metacharacters in the SrcIPv6AddressRangeStart field.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetWebFilterSettings API function, as demonstrated by shell metacharacters in the WebFilterURLs field.

TN-4900 Series firmware versions v1.2.4 and prior and TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command injection vulnerability. This vulnerability stems from insufficient input validation in the key-generation function, which could potentially allow malicious users to execute remote code on affected devices.

TRENDnet TEW-827DRU devices through 2.06B04 contain multiple command injections in apply.cgi via the action pppoe_connect, ru_pppoe_connect, or dhcp_connect with the key wan_ifname (or wan0_dns), allowing an authenticated user to run arbitrary commands on the device.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetSysLogSettings API function, as demonstrated by shell metacharacters in the IPAddress field.

The Dataprobe iBoot PDU running firmware version 1.43.03312023 or earlier is vulnerable to command injection via the `user-name` URL parameter. An authenticated malicious agent can exploit this vulnerability to execute arbitrary command on the underlying Linux operating system.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetStaticRouteIPv6Settings API function, as demonstrated by shell metacharacters in the DestNetwork field.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetStaticRouteIPv4Settings API function, as demonstrated by shell metacharacters in the Gateway field.

Airspan AirVelocity 1500 software versions prior to 15.18.00.2511 have a root command injection vulnerability in the ActiveBank parameter of the recoverySubmit.cgi script running on the eNodeB's web management UI. This issue may affect other AirVelocity and AirSpeed models.

Centreon before 19.04.15 allows remote attackers to execute arbitrary OS commands by placing shell metacharacters in RRDdatabase_status_path (via a main.get.php request) and then visiting the include/views/graphs/graphStatus/displayServiceStatus.php page.

A vulnerability classified as critical was found in DedeCMS 5.7.111. This vulnerability affects the function AddMyAddon of the file album_add.php. The manipulation of the argument albumUploadFiles leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-240940.

Artica Pandora FMS 7.44 allows remote command execution via the events feature.

A remote code execution vulnerability exists in Magento 2.2 prior to 2.2.10, Magento 2.3 prior to 2.3.3 or 2.3.2-p1. An authenticated user with system data manipulation privileges can execute aribitrary code through arbitrary file deletion and OS command injection.

Kiwi TCMS is an open source test management system. In kiwitcms/Kiwi v12.2 and prior and kiwitcms/enterprise v12.2 and prior, the `changelog.yml` workflow is vulnerable to command injection attacks because of using an untrusted `github.head_ref` field. The `github.head_ref` value is an attacker-controlled value. Assigning the value to `zzz";echo${IFS}"hello";#` can lead to command injection. Since the permission is not restricted, the attacker has a write-access to the repository. Commit 834c86dfd1b2492ccad7ebbfd6304bfec895fed2 of the kiwitcms/Kiwi repository and commit e39f7e156fdaf6fec09a15ea6f4e8fec8cdbf751 of the kiwitcms/enterprise repository contain a fix for this issue.

Access analysis CGI An-Analyzer released in 2019 June 24 and earlier allows remote authenticated attackers to execute arbitrary OS commands via the Management Page.

Multiple authenticated command injection vulnerabilities exist in the command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWLM version 8.6.0 through 8.6.5 and 8.5.0 through 8.5.4 allows attacker to execute unauthorized code or commands via specifically crafted HTTP get request parameters.

An OS command injection vulnerability exists in the api.cgi cmd.mvpn.x509.write functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability is specifically for the `system` call in the file `/web/MANGA/cgi-bin/api.cgi` for firmware version 6.3.5 at offset `0x4bde44`.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWLM version 8.6.0 through 8.6.5 and 8.5.0 through 8.5.4 allows attacker to execute unauthorized code or commands via specifically crafted HTTP get request parameters.

An authenticated command injection vulnerability in Weintek cMT2078X easyweb Web Version v2.1.3, OS v20220215 allows attackers to execute arbitrary code or access sensitive information via injecting a crafted payload into the HMI Name parameter.

An issue discovered in TenghuTOS TWS-200 firmware version:V4.0-201809201424 allows a remote attacker to execute arbitrary code via crafted command on the ping page component.

A flaw was found in pgAdmin. This issue occurs when the pgAdmin server HTTP API validates the path a user selects to external PostgreSQL utilities such as pg_dump and pg_restore. Versions of pgAdmin prior to 7.6 failed to properly control the server code executed on this API, allowing an authenticated user to run arbitrary commands on the server.

AMI BMC contains a vulnerability in the SPX REST API, where an attacker with the required privileges can inject arbitrary shell commands, which may lead to code execution, denial of service, information disclosure, or data tampering.