In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: Clear affinity hint before calling ath11k_pcic_free_irq() in error path If a shared IRQ is used by the driver due to platform limitation, then the IRQ affinity hint is set right after the allocation of IRQ vectors in ath11k_pci_alloc_msi(). This does no harm unless one of the functions requesting the IRQ fails and attempt to free the IRQ. This results in the below warning: WARNING: CPU: 7 PID: 349 at kernel/irq/manage.c:1929 free_irq+0x278/0x29c Call trace: free_irq+0x278/0x29c ath11k_pcic_free_irq+0x70/0x10c [ath11k] ath11k_pci_probe+0x800/0x820 [ath11k_pci] local_pci_probe+0x40/0xbc The warning is due to not clearing the affinity hint before freeing the IRQs. So to fix this issue, clear the IRQ affinity hint before calling ath11k_pcic_free_irq() in the error path. The affinity will be cleared once again further down the error path due to code organization, but that does no harm. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-05266-QCAHSTSWPLZ_V2_TO_X86-1

In the Linux kernel, the following vulnerability has been resolved: f2fs: quota: fix to avoid warning in dquot_writeback_dquots() F2FS-fs (dm-59): checkpoint=enable has some unwritten data. ------------[ cut here ]------------ WARNING: CPU: 6 PID: 8013 at fs/quota/dquot.c:691 dquot_writeback_dquots+0x2fc/0x308 pc : dquot_writeback_dquots+0x2fc/0x308 lr : f2fs_quota_sync+0xcc/0x1c4 Call trace: dquot_writeback_dquots+0x2fc/0x308 f2fs_quota_sync+0xcc/0x1c4 f2fs_write_checkpoint+0x3d4/0x9b0 f2fs_issue_checkpoint+0x1bc/0x2c0 f2fs_sync_fs+0x54/0x150 f2fs_do_sync_file+0x2f8/0x814 __f2fs_ioctl+0x1960/0x3244 f2fs_ioctl+0x54/0xe0 __arm64_sys_ioctl+0xa8/0xe4 invoke_syscall+0x58/0x114 checkpoint and f2fs_remount may race as below, resulting triggering warning in dquot_writeback_dquots(). atomic write remount - do_remount - down_write(&sb->s_umount); - f2fs_remount - ioctl - f2fs_do_sync_file - f2fs_sync_fs - f2fs_write_checkpoint - block_operations - locked = down_read_trylock(&sbi->sb->s_umount) : fail to lock due to the write lock was held by remount - up_write(&sb->s_umount); - f2fs_quota_sync - dquot_writeback_dquots - WARN_ON_ONCE(!rwsem_is_locked(&sb->s_umount)) : trigger warning because s_umount lock was unlocked by remount If checkpoint comes from mount/umount/remount/freeze/quotactl, caller of checkpoint has already held s_umount lock, calling dquot_writeback_dquots() in the context should be safe. So let's record task to sbi->umount_lock_holder, so that checkpoint can know whether the lock has held in the context or not by checking current w/ it. In addition, in order to not misrepresent caller of checkpoint, we should not allow to trigger async checkpoint for those callers: mount/umount/remount/ freeze/quotactl.

In the Linux kernel, the following vulnerability has been resolved: PCI: vmd: Make vmd_dev::cfg_lock a raw_spinlock_t type The access to the PCI config space via pci_ops::read and pci_ops::write is a low-level hardware access. The functions can be accessed with disabled interrupts even on PREEMPT_RT. The pci_lock is a raw_spinlock_t for this purpose. A spinlock_t becomes a sleeping lock on PREEMPT_RT, so it cannot be acquired with disabled interrupts. The vmd_dev::cfg_lock is accessed in the same context as the pci_lock. Make vmd_dev::cfg_lock a raw_spinlock_t type so it can be used with interrupts disabled. This was reported as: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 Call Trace: rt_spin_lock+0x4e/0x130 vmd_pci_read+0x8d/0x100 [vmd] pci_user_read_config_byte+0x6f/0xe0 pci_read_config+0xfe/0x290 sysfs_kf_bin_read+0x68/0x90 [bigeasy: reword commit message] Tested-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com> [kwilczynski: commit log] [bhelgaas: add back report info from https://lore.kernel.org/lkml/20241218115951.83062-1-ryotkkr98@gmail.com/]

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: Fix accessing freed irq affinity_hint In stmmac_request_irq_multi_msi(), a pointer to the stack variable cpu_mask is passed to irq_set_affinity_hint(). This value is stored in irq_desc->affinity_hint, but once stmmac_request_irq_multi_msi() returns, the pointer becomes dangling. The affinity_hint is exposed via procfs with S_IRUGO permissions, allowing any unprivileged process to read it. Accessing this stale pointer can lead to: - a kernel oops or panic if the referenced memory has been released and unmapped, or - leakage of kernel data into userspace if the memory is re-used for other purposes. All platforms that use stmmac with PCI MSI (Intel, Loongson, etc) are affected.

In the Linux kernel, the following vulnerability has been resolved: seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors input_action_end_dx4() and input_action_end_dx6() are called NF_HOOK() for PREROUTING hook, in PREROUTING hook, we should passing a valid indev, and a NULL outdev to NF_HOOK(), otherwise may trigger a NULL pointer dereference, as below: [74830.647293] BUG: kernel NULL pointer dereference, address: 0000000000000090 [74830.655633] #PF: supervisor read access in kernel mode [74830.657888] #PF: error_code(0x0000) - not-present page [74830.659500] PGD 0 P4D 0 [74830.660450] Oops: 0000 [#1] PREEMPT SMP PTI ... [74830.664953] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [74830.666569] RIP: 0010:rpfilter_mt+0x44/0x15e [ipt_rpfilter] ... [74830.689725] Call Trace: [74830.690402] <IRQ> [74830.690953] ? show_trace_log_lvl+0x1c4/0x2df [74830.692020] ? show_trace_log_lvl+0x1c4/0x2df [74830.693095] ? ipt_do_table+0x286/0x710 [ip_tables] [74830.694275] ? __die_body.cold+0x8/0xd [74830.695205] ? page_fault_oops+0xac/0x140 [74830.696244] ? exc_page_fault+0x62/0x150 [74830.697225] ? asm_exc_page_fault+0x22/0x30 [74830.698344] ? rpfilter_mt+0x44/0x15e [ipt_rpfilter] [74830.699540] ipt_do_table+0x286/0x710 [ip_tables] [74830.700758] ? ip6_route_input+0x19d/0x240 [74830.701752] nf_hook_slow+0x3f/0xb0 [74830.702678] input_action_end_dx4+0x19b/0x1e0 [74830.703735] ? input_action_end_t+0xe0/0xe0 [74830.704734] seg6_local_input_core+0x2d/0x60 [74830.705782] lwtunnel_input+0x5b/0xb0 [74830.706690] __netif_receive_skb_one_core+0x63/0xa0 [74830.707825] process_backlog+0x99/0x140 [74830.709538] __napi_poll+0x2c/0x160 [74830.710673] net_rx_action+0x296/0x350 [74830.711860] __do_softirq+0xcb/0x2ac [74830.713049] do_softirq+0x63/0x90 input_action_end_dx4() passing a NULL indev to NF_HOOK(), and finally trigger a NULL dereference in rpfilter_mt()->rpfilter_is_loopback(): static bool rpfilter_is_loopback(const struct sk_buff *skb, const struct net_device *in) { // in is NULL return skb->pkt_type == PACKET_LOOPBACK || in->flags & IFF_LOOPBACK; }

In the Linux kernel, the following vulnerability has been resolved: gro: fix ownership transfer If packets are GROed with fraglist they might be segmented later on and continue their journey in the stack. In skb_segment_list those skbs can be reused as-is. This is an issue as their destructor was removed in skb_gro_receive_list but not the reference to their socket, and then they can't be orphaned. Fix this by also removing the reference to the socket. For example this could be observed, kernel BUG at include/linux/skbuff.h:3131! (skb_orphan) RIP: 0010:ip6_rcv_core+0x11bc/0x19a0 Call Trace: ipv6_list_rcv+0x250/0x3f0 __netif_receive_skb_list_core+0x49d/0x8f0 netif_receive_skb_list_internal+0x634/0xd40 napi_complete_done+0x1d2/0x7d0 gro_cell_poll+0x118/0x1f0 A similar construction is found in skb_gro_receive, apply the same change there.

In the Linux kernel, the following vulnerability has been resolved: landlock: Fix d_parent walk The WARN_ON_ONCE() in collect_domain_accesses() can be triggered when trying to link a root mount point. This cannot work in practice because this directory is mounted, but the VFS check is done after the call to security_path_link(). Do not use source directory's d_parent when the source directory is the mount point. [mic: Fix commit message]

In the Linux kernel, the following vulnerability has been resolved: tls: get psock ref after taking rxlock to avoid leak At the start of tls_sw_recvmsg, we take a reference on the psock, and then call tls_rx_reader_lock. If that fails, we return directly without releasing the reference. Instead of adding a new label, just take the reference after locking has succeeded, since we don't need it before.

In the Linux kernel, the following vulnerability has been resolved: btrfs: scrub: handle RST lookup error correctly [BUG] When running btrfs/060 with forced RST feature, it would crash the following ASSERT() inside scrub_read_endio(): ASSERT(sector_nr < stripe->nr_sectors); Before that, we would have tree dump from btrfs_get_raid_extent_offset(), as we failed to find the RST entry for the range. [CAUSE] Inside scrub_submit_extent_sector_read() every time we allocated a new bbio we immediately called btrfs_map_block() to make sure there was some RST range covering the scrub target. But if btrfs_map_block() fails, we immediately call endio for the bbio, while the bbio is newly allocated, it's completely empty. Then inside scrub_read_endio(), we go through the bvecs to find the sector number (as bi_sector is no longer reliable if the bio is submitted to lower layers). And since the bio is empty, such bvecs iteration would not find any sector matching the sector, and return sector_nr == stripe->nr_sectors, triggering the ASSERT(). [FIX] Instead of calling btrfs_map_block() after allocating a new bbio, call btrfs_map_block() first. Since our only objective of calling btrfs_map_block() is only to update stripe_len, there is really no need to do that after btrfs_alloc_bio(). This new timing would avoid the problem of handling empty bbio completely, and in fact fixes a possible race window for the old code, where if the submission thread is the only owner of the pending_io, the scrub would never finish (since we didn't decrease the pending_io counter). Although the root cause of RST lookup failure still needs to be addressed.

In the Linux kernel, the following vulnerability has been resolved: f2fs: remove clear SB_INLINECRYPT flag in default_options In f2fs_remount, SB_INLINECRYPT flag will be clear and re-set. If create new file or open file during this gap, these files will not use inlinecrypt. Worse case, it may lead to data corruption if wrappedkey_v0 is enable. Thread A: Thread B: -f2fs_remount -f2fs_file_open or f2fs_new_inode -default_options <- clear SB_INLINECRYPT flag -fscrypt_select_encryption_impl -parse_options <- set SB_INLINECRYPT again

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix missing xas_retry() calls in xarray iteration netfslib has a number of places in which it performs iteration of an xarray whilst being under the RCU read lock. It *should* call xas_retry() as the first thing inside of the loop and do "continue" if it returns true in case the xarray walker passed out a special value indicating that the walk needs to be redone from the root[*]. Fix this by adding the missing retry checks. [*] I wonder if this should be done inside xas_find(), xas_next_node() and suchlike, but I'm told that's not an simple change to effect. This can cause an oops like that below. Note the faulting address - this is an internal value (|0x2) returned from xarray. BUG: kernel NULL pointer dereference, address: 0000000000000402 ... RIP: 0010:netfs_rreq_unlock+0xef/0x380 [netfs] ... Call Trace: netfs_rreq_assess+0xa6/0x240 [netfs] netfs_readpage+0x173/0x3b0 [netfs] ? init_wait_var_entry+0x50/0x50 filemap_read_page+0x33/0xf0 filemap_get_pages+0x2f2/0x3f0 filemap_read+0xaa/0x320 ? do_filp_open+0xb2/0x150 ? rmqueue+0x3be/0xe10 ceph_read_iter+0x1fe/0x680 [ceph] ? new_sync_read+0x115/0x1a0 new_sync_read+0x115/0x1a0 vfs_read+0xf3/0x180 ksys_read+0x5f/0xe0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Changes: ======== ver #2) - Changed an unsigned int to a size_t to reduce the likelihood of an overflow as per Willy's suggestion. - Added an additional patch to fix the maths.

In the Linux kernel, the following vulnerability has been resolved: staging: greybus: audio_helper: remove unused and wrong debugfs usage In the greybus audio_helper code, the debugfs file for the dapm has the potential to be removed and memory will be leaked. There is also the very real potential for this code to remove ALL debugfs entries from the system, and it seems like this is what will really happen if this code ever runs. This all is very wrong as the greybus audio driver did not create this debugfs file, the sound core did and controls the lifespan of it. So remove all of the debugfs logic from the audio_helper code as there's no way it could be correct. If this really is needed, it can come back with a fixup for the incorrect usage of the debugfs_lookup() call which is what caused this to be noticed at all.

In the Linux kernel, the following vulnerability has been resolved: fpga: m10bmc-sec: Fix probe rollback Handle probe error rollbacks properly to avoid leaks.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: imx-sdma: Fix a possible memory leak in sdma_transfer_init If the function sdma_load_context() fails, the sdma_desc will be freed, but the allocated desc->bd is forgot to be freed. We already met the sdma_load_context() failure case and the log as below: [ 450.699064] imx-sdma 30bd0000.dma-controller: Timeout waiting for CH0 ready ... In this case, the desc->bd will not be freed without this change.

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7915: Fix PCI device refcount leak in mt7915_pci_init_hif2() As comment of pci_get_device() says, it returns a pci_device with its refcount increased. We need to call pci_dev_put() to decrease the refcount. Save the return value of pci_get_device() and call pci_dev_put() to decrease the refcount.

In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Treat NX as a valid SPTE bit for NPT Treat the NX bit as valid when using NPT, as KVM will set the NX bit when the NX huge page mitigation is enabled (mindblowing) and trigger the WARN that fires on reserved SPTE bits being set. KVM has required NX support for SVM since commit b26a71a1a5b9 ("KVM: SVM: Refuse to load kvm_amd if NX support is not available") for exactly this reason, but apparently it never occurred to anyone to actually test NPT with the mitigation enabled. ------------[ cut here ]------------ spte = 0x800000018a600ee7, level = 2, rsvd bits = 0x800f0000001fe000 WARNING: CPU: 152 PID: 15966 at arch/x86/kvm/mmu/spte.c:215 make_spte+0x327/0x340 [kvm] Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 10.48.0 01/27/2022 RIP: 0010:make_spte+0x327/0x340 [kvm] Call Trace: <TASK> tdp_mmu_map_handle_target_level+0xc3/0x230 [kvm] kvm_tdp_mmu_map+0x343/0x3b0 [kvm] direct_page_fault+0x1ae/0x2a0 [kvm] kvm_tdp_page_fault+0x7d/0x90 [kvm] kvm_mmu_page_fault+0xfb/0x2e0 [kvm] npf_interception+0x55/0x90 [kvm_amd] svm_invoke_exit_handler+0x31/0xf0 [kvm_amd] svm_handle_exit+0xf6/0x1d0 [kvm_amd] vcpu_enter_guest+0xb6d/0xee0 [kvm] ? kvm_pmu_trigger_event+0x6d/0x230 [kvm] vcpu_run+0x65/0x2c0 [kvm] kvm_arch_vcpu_ioctl_run+0x355/0x610 [kvm] kvm_vcpu_ioctl+0x551/0x610 [kvm] __se_sys_ioctl+0x77/0xc0 __x64_sys_ioctl+0x1d/0x20 do_syscall_64+0x44/0xa0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: ext4: fix warning in 'ext4_da_release_space' Syzkaller report issue as follows: EXT4-fs (loop0): Free/Dirty block details EXT4-fs (loop0): free_blocks=0 EXT4-fs (loop0): dirty_blocks=0 EXT4-fs (loop0): Block reservation details EXT4-fs (loop0): i_reserved_data_blocks=0 EXT4-fs warning (device loop0): ext4_da_release_space:1527: ext4_da_release_space: ino 18, to_free 1 with only 0 reserved data blocks ------------[ cut here ]------------ WARNING: CPU: 0 PID: 92 at fs/ext4/inode.c:1528 ext4_da_release_space+0x25e/0x370 fs/ext4/inode.c:1524 Modules linked in: CPU: 0 PID: 92 Comm: kworker/u4:4 Not tainted 6.0.0-syzkaller-09423-g493ffd6605b2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Workqueue: writeback wb_workfn (flush-7:0) RIP: 0010:ext4_da_release_space+0x25e/0x370 fs/ext4/inode.c:1528 RSP: 0018:ffffc900015f6c90 EFLAGS: 00010296 RAX: 42215896cd52ea00 RBX: 0000000000000000 RCX: 42215896cd52ea00 RDX: 0000000000000000 RSI: 0000000080000001 RDI: 0000000000000000 RBP: 1ffff1100e907d96 R08: ffffffff816aa79d R09: fffff520002bece5 R10: fffff520002bece5 R11: 1ffff920002bece4 R12: ffff888021fd2000 R13: ffff88807483ecb0 R14: 0000000000000001 R15: ffff88807483e740 FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005555569ba628 CR3: 000000000c88e000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ext4_es_remove_extent+0x1ab/0x260 fs/ext4/extents_status.c:1461 mpage_release_unused_pages+0x24d/0xef0 fs/ext4/inode.c:1589 ext4_writepages+0x12eb/0x3be0 fs/ext4/inode.c:2852 do_writepages+0x3c3/0x680 mm/page-writeback.c:2469 __writeback_single_inode+0xd1/0x670 fs/fs-writeback.c:1587 writeback_sb_inodes+0xb3b/0x18f0 fs/fs-writeback.c:1870 wb_writeback+0x41f/0x7b0 fs/fs-writeback.c:2044 wb_do_writeback fs/fs-writeback.c:2187 [inline] wb_workfn+0x3cb/0xef0 fs/fs-writeback.c:2227 process_one_work+0x877/0xdb0 kernel/workqueue.c:2289 worker_thread+0xb14/0x1330 kernel/workqueue.c:2436 kthread+0x266/0x300 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 </TASK> Above issue may happens as follows: ext4_da_write_begin ext4_create_inline_data ext4_clear_inode_flag(inode, EXT4_INODE_EXTENTS); ext4_set_inode_flag(inode, EXT4_INODE_INLINE_DATA); __ext4_ioctl ext4_ext_migrate -> will lead to eh->eh_entries not zero, and set extent flag ext4_da_write_begin ext4_da_convert_inline_data_to_extent ext4_da_write_inline_data_begin ext4_da_map_blocks ext4_insert_delayed_block if (!ext4_es_scan_clu(inode, &ext4_es_is_delonly, lblk)) if (!ext4_es_scan_clu(inode, &ext4_es_is_mapped, lblk)) ext4_clu_mapped(inode, EXT4_B2C(sbi, lblk)); -> will return 1 allocated = true; ext4_es_insert_delayed_block(inode, lblk, allocated); ext4_writepages mpage_map_and_submit_extent(handle, &mpd, &give_up_on_write); -> return -ENOSPC mpage_release_unused_pages(&mpd, give_up_on_write); -> give_up_on_write == 1 ext4_es_remove_extent ext4_da_release_space(inode, reserved); if (unlikely(to_free > ei->i_reserved_data_blocks)) -> to_free == 1 but ei->i_reserved_data_blocks == 0 -> then trigger warning as above To solve above issue, forbid inode do migrate which has inline data.

In the Linux kernel, the following vulnerability has been resolved: can: mcp251xfd: fix infinite loop when xmit fails When the mcp251xfd_start_xmit() function fails, the driver stops processing messages, and the interrupt routine does not return, running indefinitely even after killing the running application. Error messages: [ 441.298819] mcp251xfd spi2.0 can0: ERROR in mcp251xfd_start_xmit: -16 [ 441.306498] mcp251xfd spi2.0 can0: Transmit Event FIFO buffer not empty. (seq=0x000017c7, tef_tail=0x000017cf, tef_head=0x000017d0, tx_head=0x000017d3). ... and repeat forever. The issue can be triggered when multiple devices share the same SPI interface. And there is concurrent access to the bus. The problem occurs because tx_ring->head increments even if mcp251xfd_start_xmit() fails. Consequently, the driver skips one TX package while still expecting a response in mcp251xfd_handle_tefif_one(). Resolve the issue by starting a workqueue to write the tx obj synchronously if err = -EBUSY. In case of another error, decrement tx_ring->head, remove skb from the echo stack, and drop the message. [mkl: use more imperative wording in patch description]

In the Linux kernel, the following vulnerability has been resolved: mfd: ene-kb3930: Fix a potential NULL pointer dereference The off_gpios could be NULL. Add missing check in the kb3930_probe(). This is similar to the issue fixed in commit b1ba8bcb2d1f ("backlight: hx8357: Fix potential NULL pointer dereference"). This was detected by our static analysis tool.

IBM Financial Transaction Manager for SWIFT Services for Multiplatforms 3.2.4 could allow an authenticated user to lock additional RM authorizations, resulting in a denial of service on displaying or managing these authorizations. IBM X-Force ID: 240034.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/vf: Don't try to trigger a full GT reset if VF VFs don't have access to the GDRST(0x941c) register that driver uses to reset a GT. Attempt to trigger a reset using debugfs: $ cat /sys/kernel/debug/dri/0000:00:02.1/gt0/force_reset or due to a hang condition detected by the driver leads to: [ ] xe 0000:00:02.1: [drm] GT0: trying reset from force_reset [xe] [ ] xe 0000:00:02.1: [drm] GT0: reset queued [ ] xe 0000:00:02.1: [drm] GT0: reset started [ ] ------------[ cut here ]------------ [ ] xe 0000:00:02.1: [drm] GT0: VF is trying to write 0x1 to an inaccessible register 0x941c+0x0 [ ] WARNING: CPU: 3 PID: 3069 at drivers/gpu/drm/xe/xe_gt_sriov_vf.c:996 xe_gt_sriov_vf_write32+0xc6/0x580 [xe] [ ] RIP: 0010:xe_gt_sriov_vf_write32+0xc6/0x580 [xe] [ ] Call Trace: [ ] <TASK> [ ] ? show_regs+0x6c/0x80 [ ] ? __warn+0x93/0x1c0 [ ] ? xe_gt_sriov_vf_write32+0xc6/0x580 [xe] [ ] ? report_bug+0x182/0x1b0 [ ] ? handle_bug+0x6e/0xb0 [ ] ? exc_invalid_op+0x18/0x80 [ ] ? asm_exc_invalid_op+0x1b/0x20 [ ] ? xe_gt_sriov_vf_write32+0xc6/0x580 [xe] [ ] ? xe_gt_sriov_vf_write32+0xc6/0x580 [xe] [ ] ? xe_gt_tlb_invalidation_reset+0xef/0x110 [xe] [ ] ? __mutex_unlock_slowpath+0x41/0x2e0 [ ] xe_mmio_write32+0x64/0x150 [xe] [ ] do_gt_reset+0x2f/0xa0 [xe] [ ] gt_reset_worker+0x14e/0x1e0 [xe] [ ] process_one_work+0x21c/0x740 [ ] worker_thread+0x1db/0x3c0 Fix that by sending H2G VF_RESET(0x5507) action instead.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix dc_link NULL handling in HPD init amdgpu_dm_hpd_init() may see connectors without a valid dc_link. The code already checks dc_link for the polling decision, but later unconditionally dereferences it when setting up HPD interrupts. Assign dc_link early and skip connectors where it is NULL. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_irq.c:940 amdgpu_dm_hpd_init() error: we previously assumed 'dc_link' could be null (see line 931) drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_irq.c 923 /* 924 * Analog connectors may be hot-plugged unlike other connector 925 * types that don't support HPD. Only poll analog connectors. 926 */ 927 use_polling |= 928 amdgpu_dm_connector->dc_link && ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The patch adds this NULL check but hopefully it can be removed 929 dc_connector_supports_analog(amdgpu_dm_connector->dc_link->link_id.id); 930 931 dc_link = amdgpu_dm_connector->dc_link; dc_link assigned here. 932 933 /* 934 * Get a base driver irq reference for hpd ints for the lifetime 935 * of dm. Note that only hpd interrupt types are registered with 936 * base driver; hpd_rx types aren't. IOW, amdgpu_irq_get/put on 937 * hpd_rx isn't available. DM currently controls hpd_rx 938 * explicitly with dc_interrupt_set() 939 */ --> 940 if (dc_link->irq_source_hpd != DC_IRQ_SOURCE_INVALID) { ^^^^^^^^^^^^^^^^^^^^^^^ If it's NULL then we are trouble because we dereference it here. 941 irq_type = dc_link->irq_source_hpd - DC_IRQ_SOURCE_HPD1; 942 /* 943 * TODO: There's a mismatch between mode_info.num_hpd 944 * and what bios reports as the # of connectors with hpd

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: fix UBSAN warning in kv_dpm.c Adds bounds check for sumo_vid_mapping_entry.

In the Linux kernel, the following vulnerability has been resolved: arm/crc-t10dif: fix use of out-of-scope array in crc_t10dif_arch() Fix a silly bug where an array was used outside of its scope.

In the Linux kernel, the following vulnerability has been resolved: virtio_net: fix memory leak inside XPD_TX with mergeable When we call xdp_convert_buff_to_frame() to get xdpf, if it returns NULL, we should check if xdp_page was allocated by xdp_linearize_page(). If it is newly allocated, it should be freed here alone. Just like any other "goto err_xdp".

In the Linux kernel, the following vulnerability has been resolved: rpmsg: Fix possible refcount leak in rpmsg_register_device_override() rpmsg_register_device_override need to call put_device to free vch when driver_set_override fails. Fix this by adding a put_device() to the error path.

In the Linux kernel, the following vulnerability has been resolved: team: Move team device type change at the end of team_port_add Attempting to add a port device that is already up will expectedly fail, but not before modifying the team device header_ops. In the case of the syzbot reproducer the gre0 device is already in state UP when it attempts to add it as a port device of team0, this fails but before that header_ops->create of team0 is changed from eth_header to ipgre_header in the call to team_dev_type_check_change. Later when we end up in ipgre_header() struct ip_tunnel* points to nonsense as the private data of the device still holds a struct team. Example sequence of iproute2 commands to reproduce the hang/BUG(): ip link add dev team0 type team ip link add dev gre0 type gre ip link set dev gre0 up ip link set dev gre0 master team0 ip link set dev team0 up ping -I team0 1.1.1.1 Move team_dev_type_check_change down where all other checks have passed as it changes the dev type with no way to restore it in case one of the checks that follow it fail. Also make sure to preserve the origial mtu assignment: - If port_dev is not the same type as dev, dev takes mtu from port_dev - If port_dev is the same type as dev, port_dev takes mtu from dev This is done by adding a conditional before the call to dev_set_mtu to prevent it from assigning port_dev->mtu = dev->mtu and instead letting team_dev_type_check_change assign dev->mtu = port_dev->mtu. The conditional is needed because the patch moves the call to team_dev_type_check_change past dev_set_mtu. Testing: - team device driver in-tree selftests - Add/remove various devices as slaves of team device - syzbot

In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: Whitelist dtl slub object for copying to userspace Reading the dispatch trace log from /sys/kernel/debug/powerpc/dtl/cpu-* results in a BUG() when the config CONFIG_HARDENED_USERCOPY is enabled as shown below. kernel BUG at mm/usercopy.c:102! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: xfs libcrc32c dm_service_time sd_mod t10_pi sg ibmvfc scsi_transport_fc ibmveth pseries_wdt dm_multipath dm_mirror dm_region_hash dm_log dm_mod fuse CPU: 27 PID: 1815 Comm: python3 Not tainted 6.10.0-rc3 #85 Hardware name: IBM,9040-MRX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NM1060_042) hv:phyp pSeries NIP: c0000000005d23d4 LR: c0000000005d23d0 CTR: 00000000006ee6f8 REGS: c000000120c078c0 TRAP: 0700 Not tainted (6.10.0-rc3) MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 2828220f XER: 0000000e CFAR: c0000000001fdc80 IRQMASK: 0 [ ... GPRs omitted ... ] NIP [c0000000005d23d4] usercopy_abort+0x78/0xb0 LR [c0000000005d23d0] usercopy_abort+0x74/0xb0 Call Trace: usercopy_abort+0x74/0xb0 (unreliable) __check_heap_object+0xf8/0x120 check_heap_object+0x218/0x240 __check_object_size+0x84/0x1a4 dtl_file_read+0x17c/0x2c4 full_proxy_read+0x8c/0x110 vfs_read+0xdc/0x3a0 ksys_read+0x84/0x144 system_call_exception+0x124/0x330 system_call_vectored_common+0x15c/0x2ec --- interrupt: 3000 at 0x7fff81f3ab34 Commit 6d07d1cd300f ("usercopy: Restrict non-usercopy caches to size 0") requires that only whitelisted areas in slab/slub objects can be copied to userspace when usercopy hardening is enabled using CONFIG_HARDENED_USERCOPY. Dtl contains hypervisor dispatch events which are expected to be read by privileged users. Hence mark this safe for user access. Specify useroffset=0 and usersize=DISPATCH_LOG_BYTES to whitelist the entire object.

In the Linux kernel, the following vulnerability has been resolved: kcm: annotate data-races around kcm->rx_wait kcm->rx_psock can be read locklessly in kcm_rfree(). Annotate the read and writes accordingly. syzbot reported: BUG: KCSAN: data-race in kcm_rcv_strparser / kcm_rfree write to 0xffff88810784e3d0 of 1 bytes by task 1823 on cpu 1: reserve_rx_kcm net/kcm/kcmsock.c:283 [inline] kcm_rcv_strparser+0x250/0x3a0 net/kcm/kcmsock.c:363 __strp_recv+0x64c/0xd20 net/strparser/strparser.c:301 strp_recv+0x6d/0x80 net/strparser/strparser.c:335 tcp_read_sock+0x13e/0x5a0 net/ipv4/tcp.c:1703 strp_read_sock net/strparser/strparser.c:358 [inline] do_strp_work net/strparser/strparser.c:406 [inline] strp_work+0xe8/0x180 net/strparser/strparser.c:415 process_one_work+0x3d3/0x720 kernel/workqueue.c:2289 worker_thread+0x618/0xa70 kernel/workqueue.c:2436 kthread+0x1a9/0x1e0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 read to 0xffff88810784e3d0 of 1 bytes by task 17869 on cpu 0: kcm_rfree+0x121/0x220 net/kcm/kcmsock.c:181 skb_release_head_state+0x8e/0x160 net/core/skbuff.c:841 skb_release_all net/core/skbuff.c:852 [inline] __kfree_skb net/core/skbuff.c:868 [inline] kfree_skb_reason+0x5c/0x260 net/core/skbuff.c:891 kfree_skb include/linux/skbuff.h:1216 [inline] kcm_recvmsg+0x226/0x2b0 net/kcm/kcmsock.c:1161 ____sys_recvmsg+0x16c/0x2e0 ___sys_recvmsg net/socket.c:2743 [inline] do_recvmmsg+0x2f1/0x710 net/socket.c:2837 __sys_recvmmsg net/socket.c:2916 [inline] __do_sys_recvmmsg net/socket.c:2939 [inline] __se_sys_recvmmsg net/socket.c:2932 [inline] __x64_sys_recvmmsg+0xde/0x160 net/socket.c:2932 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x01 -> 0x00 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 17869 Comm: syz-executor.2 Not tainted 6.1.0-rc1-syzkaller-00010-gbb1a1146467a-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix possible deadlock in io_register_iowq_max_workers() The io_register_iowq_max_workers() function calls io_put_sq_data(), which acquires the sqd->lock without releasing the uring_lock. Similar to the commit 009ad9f0c6ee ("io_uring: drop ctx->uring_lock before acquiring sqd->lock"), this can lead to a potential deadlock situation. To resolve this issue, the uring_lock is released before calling io_put_sq_data(), and then it is re-acquired after the function call. This change ensures that the locks are acquired in the correct order, preventing the possibility of a deadlock.

In the Linux kernel, the following vulnerability has been resolved: tracing: kprobe: Fix memory leak in test_gen_kprobe/kretprobe_cmd() test_gen_kprobe_cmd() only free buf in fail path, hence buf will leak when there is no failure. Move kfree(buf) from fail path to common path to prevent the memleak. The same reason and solution in test_gen_kretprobe_cmd(). unreferenced object 0xffff888143b14000 (size 2048): comm "insmod", pid 52490, jiffies 4301890980 (age 40.553s) hex dump (first 32 bytes): 70 3a 6b 70 72 6f 62 65 73 2f 67 65 6e 5f 6b 70 p:kprobes/gen_kp 72 6f 62 65 5f 74 65 73 74 20 64 6f 5f 73 79 73 robe_test do_sys backtrace: [<000000006d7b836b>] kmalloc_trace+0x27/0xa0 [<0000000009528b5b>] 0xffffffffa059006f [<000000008408b580>] do_one_initcall+0x87/0x2a0 [<00000000c4980a7e>] do_init_module+0xdf/0x320 [<00000000d775aad0>] load_module+0x3006/0x3390 [<00000000e9a74b80>] __do_sys_finit_module+0x113/0x1b0 [<000000003726480d>] do_syscall_64+0x35/0x80 [<000000003441e93b>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Fix warnings during S3 suspend The enable_gpe_wakeup() function calls acpi_enable_all_wakeup_gpes(), and the later one may call the preempt_schedule_common() function, resulting in a thread switch and causing the CPU to be in an interrupt enabled state after the enable_gpe_wakeup() function returns, leading to the warnings as follow. [ C0] WARNING: ... at kernel/time/timekeeping.c:845 ktime_get+0xbc/0xc8 [ C0] ... [ C0] Call Trace: [ C0] [<90000000002243b4>] show_stack+0x64/0x188 [ C0] [<900000000164673c>] dump_stack_lvl+0x60/0x88 [ C0] [<90000000002687e4>] __warn+0x8c/0x148 [ C0] [<90000000015e9978>] report_bug+0x1c0/0x2b0 [ C0] [<90000000016478e4>] do_bp+0x204/0x3b8 [ C0] [<90000000025b1924>] exception_handlers+0x1924/0x10000 [ C0] [<9000000000343bbc>] ktime_get+0xbc/0xc8 [ C0] [<9000000000354c08>] tick_sched_timer+0x30/0xb0 [ C0] [<90000000003408e0>] __hrtimer_run_queues+0x160/0x378 [ C0] [<9000000000341f14>] hrtimer_interrupt+0x144/0x388 [ C0] [<9000000000228348>] constant_timer_interrupt+0x38/0x48 [ C0] [<90000000002feba4>] __handle_irq_event_percpu+0x64/0x1e8 [ C0] [<90000000002fed48>] handle_irq_event_percpu+0x20/0x80 [ C0] [<9000000000306b9c>] handle_percpu_irq+0x5c/0x98 [ C0] [<90000000002fd4a0>] generic_handle_domain_irq+0x30/0x48 [ C0] [<9000000000d0c7b0>] handle_cpu_irq+0x70/0xa8 [ C0] [<9000000001646b30>] handle_loongarch_irq+0x30/0x48 [ C0] [<9000000001646bc8>] do_vint+0x80/0xe0 [ C0] [<90000000002aea1c>] finish_task_switch.isra.0+0x8c/0x2a8 [ C0] [<900000000164e34c>] __schedule+0x314/0xa48 [ C0] [<900000000164ead8>] schedule+0x58/0xf0 [ C0] [<9000000000294a2c>] worker_thread+0x224/0x498 [ C0] [<900000000029d2f0>] kthread+0xf8/0x108 [ C0] [<9000000000221f28>] ret_from_kernel_thread+0xc/0xa4 [ C0] [ C0] ---[ end trace 0000000000000000 ]--- The root cause is acpi_enable_all_wakeup_gpes() uses a mutex to protect acpi_hw_enable_all_wakeup_gpes(), and acpi_ut_acquire_mutex() may cause a thread switch. Since there is no longer concurrent execution during loongarch_acpi_suspend(), we can call acpi_hw_enable_all_wakeup_gpes() directly in enable_gpe_wakeup(). The solution is similar to commit 22db06337f590d01 ("ACPI: sleep: Avoid breaking S3 wakeup due to might_sleep()").

In the Linux kernel, the following vulnerability has been resolved: vxlan: Fix uninit-value in vxlan_vnifilter_dump() KMSAN reported an uninit-value access in vxlan_vnifilter_dump() [1]. If the length of the netlink message payload is less than sizeof(struct tunnel_msg), vxlan_vnifilter_dump() accesses bytes beyond the message. This can lead to uninit-value access. Fix this by returning an error in such situations. [1] BUG: KMSAN: uninit-value in vxlan_vnifilter_dump+0x328/0x920 drivers/net/vxlan/vxlan_vnifilter.c:422 vxlan_vnifilter_dump+0x328/0x920 drivers/net/vxlan/vxlan_vnifilter.c:422 rtnl_dumpit+0xd5/0x2f0 net/core/rtnetlink.c:6786 netlink_dump+0x93e/0x15f0 net/netlink/af_netlink.c:2317 __netlink_dump_start+0x716/0xd60 net/netlink/af_netlink.c:2432 netlink_dump_start include/linux/netlink.h:340 [inline] rtnetlink_dump_start net/core/rtnetlink.c:6815 [inline] rtnetlink_rcv_msg+0x1256/0x14a0 net/core/rtnetlink.c:6882 netlink_rcv_skb+0x467/0x660 net/netlink/af_netlink.c:2542 rtnetlink_rcv+0x35/0x40 net/core/rtnetlink.c:6944 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0xed6/0x1290 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x1092/0x1230 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x330/0x3d0 net/socket.c:726 ____sys_sendmsg+0x7f4/0xb50 net/socket.c:2583 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2637 __sys_sendmsg net/socket.c:2669 [inline] __do_sys_sendmsg net/socket.c:2674 [inline] __se_sys_sendmsg net/socket.c:2672 [inline] __x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2672 x64_sys_call+0x3878/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4110 [inline] slab_alloc_node mm/slub.c:4153 [inline] kmem_cache_alloc_node_noprof+0x800/0xe80 mm/slub.c:4205 kmalloc_reserve+0x13b/0x4b0 net/core/skbuff.c:587 __alloc_skb+0x347/0x7d0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1323 [inline] netlink_alloc_large_skb+0xa5/0x280 net/netlink/af_netlink.c:1196 netlink_sendmsg+0xac9/0x1230 net/netlink/af_netlink.c:1866 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x330/0x3d0 net/socket.c:726 ____sys_sendmsg+0x7f4/0xb50 net/socket.c:2583 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2637 __sys_sendmsg net/socket.c:2669 [inline] __do_sys_sendmsg net/socket.c:2674 [inline] __se_sys_sendmsg net/socket.c:2672 [inline] __x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2672 x64_sys_call+0x3878/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 30991 Comm: syz.4.10630 Not tainted 6.12.0-10694-gc44daa7e3c73 #29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid accessing uninitialized curseg syzbot reports a f2fs bug as below: F2FS-fs (loop3): Stopped filesystem due to reason: 7 kworker/u8:7: attempt to access beyond end of device BUG: unable to handle page fault for address: ffffed1604ea3dfa RIP: 0010:get_ckpt_valid_blocks fs/f2fs/segment.h:361 [inline] RIP: 0010:has_curseg_enough_space fs/f2fs/segment.h:570 [inline] RIP: 0010:__get_secs_required fs/f2fs/segment.h:620 [inline] RIP: 0010:has_not_enough_free_secs fs/f2fs/segment.h:633 [inline] RIP: 0010:has_enough_free_secs+0x575/0x1660 fs/f2fs/segment.h:649 <TASK> f2fs_is_checkpoint_ready fs/f2fs/segment.h:671 [inline] f2fs_write_inode+0x425/0x540 fs/f2fs/inode.c:791 write_inode fs/fs-writeback.c:1525 [inline] __writeback_single_inode+0x708/0x10d0 fs/fs-writeback.c:1745 writeback_sb_inodes+0x820/0x1360 fs/fs-writeback.c:1976 wb_writeback+0x413/0xb80 fs/fs-writeback.c:2156 wb_do_writeback fs/fs-writeback.c:2303 [inline] wb_workfn+0x410/0x1080 fs/fs-writeback.c:2343 process_one_work kernel/workqueue.c:3236 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3317 worker_thread+0x870/0xd30 kernel/workqueue.c:3398 kthread+0x7a9/0x920 kernel/kthread.c:464 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Commit 8b10d3653735 ("f2fs: introduce FAULT_NO_SEGMENT") allows to trigger no free segment fault in allocator, then it will update curseg->segno to NULL_SEGNO, though, CP_ERROR_FLAG has been set, f2fs_write_inode() missed to check the flag, and access invalid curseg->segno directly in below call path, then resulting in panic: - f2fs_write_inode - f2fs_is_checkpoint_ready - has_enough_free_secs - has_not_enough_free_secs - __get_secs_required - has_curseg_enough_space - get_ckpt_valid_blocks : access invalid curseg->segno To avoid this issue, let's: - check CP_ERROR_FLAG flag in prior to f2fs_is_checkpoint_ready() in f2fs_write_inode(). - in has_curseg_enough_space(), save curseg->segno into a temp variable, and verify its validation before use.

In the Linux kernel, the following vulnerability has been resolved: team: better TEAM_OPTION_TYPE_STRING validation syzbot reported following splat [1] Make sure user-provided data contains one nul byte. [1] BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:633 [inline] BUG: KMSAN: uninit-value in string+0x3ec/0x5f0 lib/vsprintf.c:714 string_nocheck lib/vsprintf.c:633 [inline] string+0x3ec/0x5f0 lib/vsprintf.c:714 vsnprintf+0xa5d/0x1960 lib/vsprintf.c:2843 __request_module+0x252/0x9f0 kernel/module/kmod.c:149 team_mode_get drivers/net/team/team_core.c:480 [inline] team_change_mode drivers/net/team/team_core.c:607 [inline] team_mode_option_set+0x437/0x970 drivers/net/team/team_core.c:1401 team_option_set drivers/net/team/team_core.c:375 [inline] team_nl_options_set_doit+0x1339/0x1f90 drivers/net/team/team_core.c:2662 genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x1214/0x12c0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2543 genl_rcv+0x40/0x60 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:733 ____sys_sendmsg+0x877/0xb60 net/socket.c:2573 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2627 __sys_sendmsg net/socket.c:2659 [inline] __do_sys_sendmsg net/socket.c:2664 [inline] __se_sys_sendmsg net/socket.c:2662 [inline] __x64_sys_sendmsg+0x212/0x3c0 net/socket.c:2662 x64_sys_call+0x2ed6/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: mptcp: sysctl: sched: avoid using current->nsproxy Using the 'net' structure via 'current' is not recommended for different reasons. First, if the goal is to use it to read or write per-netns data, this is inconsistent with how the "generic" sysctl entries are doing: directly by only using pointers set to the table entry, e.g. table->data. Linked to that, the per-netns data should always be obtained from the table linked to the netns it had been created for, which may not coincide with the reader's or writer's netns. Another reason is that access to current->nsproxy->netns can oops if attempted when current->nsproxy had been dropped when the current task is exiting. This is what syzbot found, when using acct(2): Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] CPU: 1 UID: 0 PID: 5924 Comm: syz-executor Not tainted 6.13.0-rc5-syzkaller-00004-gccb98ccef0e5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:proc_scheduler+0xc6/0x3c0 net/mptcp/ctrl.c:125 Code: 03 42 80 3c 38 00 0f 85 fe 02 00 00 4d 8b a4 24 08 09 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 28 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 cc 02 00 00 4d 8b 7c 24 28 48 8d 84 24 c8 00 00 RSP: 0018:ffffc900034774e8 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 1ffff9200068ee9e RCX: ffffc90003477620 RDX: 0000000000000005 RSI: ffffffff8b08f91e RDI: 0000000000000028 RBP: 0000000000000001 R08: ffffc90003477710 R09: 0000000000000040 R10: 0000000000000040 R11: 00000000726f7475 R12: 0000000000000000 R13: ffffc90003477620 R14: ffffc90003477710 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fee3cd452d8 CR3: 000000007d116000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> proc_sys_call_handler+0x403/0x5d0 fs/proc/proc_sysctl.c:601 __kernel_write_iter+0x318/0xa80 fs/read_write.c:612 __kernel_write+0xf6/0x140 fs/read_write.c:632 do_acct_process+0xcb0/0x14a0 kernel/acct.c:539 acct_pin_kill+0x2d/0x100 kernel/acct.c:192 pin_kill+0x194/0x7c0 fs/fs_pin.c:44 mnt_pin_kill+0x61/0x1e0 fs/fs_pin.c:81 cleanup_mnt+0x3ac/0x450 fs/namespace.c:1366 task_work_run+0x14e/0x250 kernel/task_work.c:239 exit_task_work include/linux/task_work.h:43 [inline] do_exit+0xad8/0x2d70 kernel/exit.c:938 do_group_exit+0xd3/0x2a0 kernel/exit.c:1087 get_signal+0x2576/0x2610 kernel/signal.c:3017 arch_do_signal_or_restart+0x90/0x7e0 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop kernel/entry/common.c:111 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x150/0x2a0 kernel/entry/common.c:218 do_syscall_64+0xda/0x250 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fee3cb87a6a Code: Unable to access opcode bytes at 0x7fee3cb87a40. RSP: 002b:00007fffcccac688 EFLAGS: 00000202 ORIG_RAX: 0000000000000037 RAX: 0000000000000000 RBX: 00007fffcccac710 RCX: 00007fee3cb87a6a RDX: 0000000000000041 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 0000000000000003 R08: 00007fffcccac6ac R09: 00007fffcccacac7 R10: 00007fffcccac710 R11: 0000000000000202 R12: 00007fee3cd49500 R13: 00007fffcccac6ac R14: 0000000000000000 R15: 00007fee3cd4b000 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:proc_scheduler+0xc6/0x3c0 net/mptcp/ctrl.c:125 Code: 03 42 80 3c 38 00 0f 85 fe 02 00 00 4d 8b a4 24 08 09 00 00 48 b8 00 00 00 00 00 fc ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ipv6: use RCU protection in ip6_default_advmss() ip6_default_advmss() needs rcu protection to make sure the net structure it reads does not disappear.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: don't unregister hook when table is dormant When nf_tables_updchain encounters an error, hook registration needs to be rolled back. This should only be done if the hook has been registered, which won't happen when the table is flagged as dormant (inactive). Just move the assignment into the registration block.

In the Linux kernel, the following vulnerability has been resolved: rapidio: add check for rio_add_net() in rio_scan_alloc_net() The return value of rio_add_net() should be checked. If it fails, put_device() should be called to free the memory and give up the reference initialized in rio_add_net().

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_midi: fix MIDI Streaming descriptor lengths While the MIDI jacks are configured correctly, and the MIDIStreaming endpoint descriptors are filled with the correct information, bNumEmbMIDIJack and bLength are set incorrectly in these descriptors. This does not matter when the numbers of in and out ports are equal, but when they differ the host will receive broken descriptors with uninitialized stack memory leaking into the descriptor for whichever value is smaller. The precise meaning of "in" and "out" in the port counts is not clearly defined and can be confusing. But elsewhere the driver consistently uses this to match the USB meaning of IN and OUT viewed from the host, so that "in" ports send data to the host and "out" ports receive data from it.

In the Linux kernel, the following vulnerability has been resolved: USB: serial: quatech2: fix null-ptr-deref in qt2_process_read_urb() This patch addresses a null-ptr-deref in qt2_process_read_urb() due to an incorrect bounds check in the following: if (newport > serial->num_ports) { dev_err(&port->dev, "%s - port change to invalid port: %i\n", __func__, newport); break; } The condition doesn't account for the valid range of the serial->port buffer, which is from 0 to serial->num_ports - 1. When newport is equal to serial->num_ports, the assignment of "port" in the following code is out-of-bounds and NULL: serial_priv->current_port = newport; port = serial->port[serial_priv->current_port]; The fix checks if newport is greater than or equal to serial->num_ports indicating it is out-of-bounds.

In the Linux kernel, the following vulnerability has been resolved: net/rose: prevent integer overflows in rose_setsockopt() In case of possible unpredictably large arguments passed to rose_setsockopt() and multiplied by extra values on top of that, integer overflows may occur. Do the safest minimum and fix these issues by checking the contents of 'opt' and returning -EINVAL if they are too large. Also, switch to unsigned int and remove useless check for negative 'opt' in ROSE_IDLE case.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: add bounds check for create lease context Add missing bounds check for create lease context.

In the Linux kernel, the following vulnerability has been resolved: ftrace: Avoid potential division by zero in function_stat_show() Check whether denominator expression x * (x - 1) * 1000 mod {2^32, 2^64} produce zero and skip stddev computation in that case. For now don't care about rec->counter * rec->counter overflow because rec->time * rec->time overflow will likely happen earlier.

In the Linux kernel, the following vulnerability has been resolved: usb: renesas: Fix refcount leak bug In usbhs_rza1_hardware_init(), of_find_node_by_name() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.

In the Linux kernel, the following vulnerability has been resolved: dm-integrity: Avoid divide by zero in table status in Inline mode In Inline mode, the journal is unused, and journal_sectors is zero. Calculating the journal watermark requires dividing by journal_sectors, which should be done only if the journal is configured. Otherwise, a simple table query (dmsetup table) can cause OOPS. This bug did not show on some systems, perhaps only due to compiler optimization. On my 32-bit testing machine, this reliably crashes with the following: : Oops: divide error: 0000 [#1] PREEMPT SMP : CPU: 0 UID: 0 PID: 2450 Comm: dmsetup Not tainted 6.14.0-rc2+ #959 : EIP: dm_integrity_status+0x2f8/0xab0 [dm_integrity] ...

In the Linux kernel, the following vulnerability has been resolved: arm64: set UXN on swapper page tables [ This issue was fixed upstream by accident in c3cee924bd85 ("arm64: head: cover entire kernel image in initial ID map") as part of a large refactoring of the arm64 boot flow. This simple fix is therefore preferred for -stable backporting ] On a system that implements FEAT_EPAN, read/write access to the idmap is denied because UXN is not set on the swapper PTEs. As a result, idmap_kpti_install_ng_mappings panics the kernel when accessing __idmap_kpti_flag. Fix it by setting UXN on these PTEs.

In the Linux kernel, the following vulnerability has been resolved: PCI: brcmstb: Fix error path after a call to regulator_bulk_get() If the regulator_bulk_get() returns an error and no regulators are created, we need to set their number to zero. If we don't do this and the PCIe link up fails, a call to the regulator_bulk_free() will result in a kernel panic. While at it, print the error value, as we cannot return an error upwards as the kernel will WARN() on an error from add_bus(). [kwilczynski: commit log, use comma in the message to match style with other similar messages]

In the Linux kernel, the following vulnerability has been resolved: ipvlan: ensure network headers are in skb linear part syzbot found that ipvlan_process_v6_outbound() was assuming the IPv6 network header isis present in skb->head [1] Add the needed pskb_network_may_pull() calls for both IPv4 and IPv6 handlers. [1] BUG: KMSAN: uninit-value in __ipv6_addr_type+0xa2/0x490 net/ipv6/addrconf_core.c:47 __ipv6_addr_type+0xa2/0x490 net/ipv6/addrconf_core.c:47 ipv6_addr_type include/net/ipv6.h:555 [inline] ip6_route_output_flags_noref net/ipv6/route.c:2616 [inline] ip6_route_output_flags+0x51/0x720 net/ipv6/route.c:2651 ip6_route_output include/net/ip6_route.h:93 [inline] ipvlan_route_v6_outbound+0x24e/0x520 drivers/net/ipvlan/ipvlan_core.c:476 ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:491 [inline] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:541 [inline] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:605 [inline] ipvlan_queue_xmit+0xd72/0x1780 drivers/net/ipvlan/ipvlan_core.c:671 ipvlan_start_xmit+0x5b/0x210 drivers/net/ipvlan/ipvlan_main.c:223 __netdev_start_xmit include/linux/netdevice.h:5150 [inline] netdev_start_xmit include/linux/netdevice.h:5159 [inline] xmit_one net/core/dev.c:3735 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3751 sch_direct_xmit+0x399/0xd40 net/sched/sch_generic.c:343 qdisc_restart net/sched/sch_generic.c:408 [inline] __qdisc_run+0x14da/0x35d0 net/sched/sch_generic.c:416 qdisc_run+0x141/0x4d0 include/net/pkt_sched.h:127 net_tx_action+0x78b/0x940 net/core/dev.c:5484 handle_softirqs+0x1a0/0x7c0 kernel/softirq.c:561 __do_softirq+0x14/0x1a kernel/softirq.c:595 do_softirq+0x9a/0x100 kernel/softirq.c:462 __local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:389 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline] __dev_queue_xmit+0x2758/0x57d0 net/core/dev.c:4611 dev_queue_xmit include/linux/netdevice.h:3311 [inline] packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3132 [inline] packet_sendmsg+0x93e0/0xa7e0 net/packet/af_packet.c:3164 sock_sendmsg_nosec net/socket.c:718 [inline]

In the Linux kernel, the following vulnerability has been resolved: can: ctucanfd: handle skb allocation failure If skb allocation fails, the pointer to struct can_frame is NULL. This is actually handled everywhere inside ctucan_err_interrupt() except for the only place. Add the missed NULL check. Found by Linux Verification Center (linuxtesting.org) with SVACE static analysis tool.