Russh is a Rust SSH client & server library. Prior to version 0.60.3, CryptoVec used unchecked capacity growth, unchecked length arithmetic, and unsafe allocation/locking paths. In current russh releases, local SSH agent peers could still feed attacker-controlled frame lengths into buffer growth before validation. In older russh releases before 0.58.0, remote SSH traffic also reached CryptoVec through transport and compression buffers. This issue has been patched in version 0.60.3.

Russh is a Rust SSH client & server library. From version 0.34.0 to before version 0.61.1, when SSH compression is enabled, russh accepted compressed packets whose on-wire size passed the normal transport packet-length checks but whose decompressed size was much larger. This allowed a remote peer to send oversized post-decompression packets that should have been rejected. In current releases, this is a remote denial-of-service / resource-exhaustion issue in the post-decompression receive path. In older releases before 0.58.0, the same remote decompression path used CryptoVec, which appears to make the historical impact worse. This issue has been patched in version 0.61.1.

Russh is a Rust SSH client & server library. Prior to version 0.60.1, a pre-authentication denial-of-service vulnerability exists in the server's keyboard-interactive authentication handler. A malicious client can crash any russh-based server that implements keyboard-interactive auth (e.g., for 2FA/TOTP) with a single malformed packet, requiring no credentials. This issue has been patched in version 0.60.1.

Russh is a Rust SSH client & server library. Allocating an untrusted amount of memory allows any unauthenticated user to OOM a russh server. An SSH packet consists of a 4-byte big-endian length, followed by a byte stream of this length. After parsing and potentially decrypting the 4-byte length, russh allocates enough memory for this bytestream, as a performance optimization to avoid reallocations later. But this length is entirely untrusted and can be set to any value by the client, causing this much memory to be allocated, which will cause the process to OOM within a few such requests. This vulnerability is fixed in 0.44.1.

Russh is a Rust SSH client & server library. From version 0.37.0 to before version 0.61.0, in the russh client keyboard-interactive authentication path, a malicious SSH server could send a USERAUTH_INFO_REQUEST with an attacker-controlled prompt count, and the client would use that raw count directly in Vec::with_capacity(...) before validating that enough prompt data was actually present in the packet. This issue has been patched in version 0.61.0.

Russh is a Rust SSH client & server library. From version 0.34.0-beta.1 to before version 0.61.0, russh did not enforce the SSH identification-string rules as deliberately as OpenSSH. In particular, the server-side identification reader used the same permissive path as the client, allowing pre-banner lines from clients, and the reader did not enforce a bounded number of pre-banner lines. For a library server built on russh, this could allow a remote peer to hold connection setup resources in the cleartext pre-authentication phase with malformed identification input that should have been rejected early. This issue has been patched in version 0.61.0.

OpenDDS is an open source C++ implementation of the Object Management Group (OMG) Data Distribution Service (DDS). OpenDDS crashes while parsing a malformed `PID_PROPERTY_LIST` in a DATA submessage during participant discovery. Attackers can remotely crash OpenDDS processes by sending a DATA submessage containing the malformed parameter to the known multicast port. This issue has been addressed in version 3.25. Users are advised to upgrade. There are no known workarounds for this vulnerability.

IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) 11.5 and 11.5 is vulnerable to denial of service with a specially crafted ALTER TABLE statement. IBM X-Force ID: 261616.

Input verification vulnerability in the WMS API. Successful exploitation of this vulnerability may cause the device to restart.

Incorrect data input validation vulnerability, which could allow an attacker with access to the network to implement fuzzing techniques that would allow him to gain knowledge about specially crafted packets that would create a DoS condition through the MMS protocol when initiating communication, achieving a complete system reboot of the device and its services.

In Eclipse Mosquitto versions 2.07 and earlier, the server will crash if the client tries to send a PUBLISH packet with topic length = 0.

Microsoft Message Queuing (MSMQ) Denial of Service Vulnerability

The ntpd client in NTP 4.x before 4.2.8p4 and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service via a number of crafted "KOD" messages.

The crypto_xmit function in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service (crash). NOTE: This vulnerability exists due to an incomplete fix for CVE-2014-9750.

The crypto_xmit function in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service (crash) via crafted packets containing particular autokey operations. NOTE: This vulnerability exists due to an incomplete fix for CVE-2014-9750.

Transient DOS while processing CCCH data when NW sends data with invalid length.

In archive/zip in Go before 1.15.13 and 1.16.x before 1.16.5, a crafted file count (in an archive's header) can cause a NewReader or OpenReader panic.

socket.io parser is a socket.io encoder and decoder written in JavaScript complying with version 5 of socket.io-protocol. A specially crafted Socket.IO packet can trigger an uncaught exception on the Socket.IO server, thus killing the Node.js process. A patch has been released in version 4.2.3.

By abusing a design flaw in the firmware upgrade mechanism of the impacted terminal it's possible to cause a permanent denial of service for the terminal. the only way to recover the terminal is by sending back the terminal to the manufacturer

Transient DOS while processing DL NAS Transport message when message ID is not defined in the 3GPP specification.

Dell VxRail, version(s) 8.0.100 and earlier contain a denial-of-service vulnerability in the upgrade functionality. A remote unauthenticated attacker could potentially exploit this vulnerability, leading to degraded performance and system malfunction.

libspdm is a sample implementation that follows the DMTF SPDM specifications. Prior to versions 2.3.3 and 3.0, following a successful CAPABILITIES response, a libspdm Requester stores the Responder's CTExponent into its context without validation. If the Requester sends a request message that requires a cryptography operation by the Responder, such as CHALLENGE, libspdm will calculate the timeout value using the Responder's unvalidated CTExponent. A patch is available in version 2.3.3. A workaround is also available. After completion of VCA, the Requester can check the value of the Responder's CTExponent. If it greater than or equal to 64, then the Requester can stop communication with the Responder.

Transient DOS while processing SMS container of non-standard size received in DL NAS transport in NR.

In modem EMM, there is a possible system crash due to improper input validation. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01183647; Issue ID: MOLY01183647 (MSV-963).

The Moped::BSON::ObjecId.legal? method in rubygem-moped before commit dd5a7c14b5d2e466f7875d079af71ad19774609b allows remote attackers to cause a denial of service (worker resource consumption) or perform a cross-site scripting (XSS) attack via a crafted string.

Pexip Infinity before 31.2 has Improper Input Validation for RTCP, allowing remote attackers to trigger an abort.

Pexip Infinity before 31.2 has Improper Input Validation for signalling, allowing remote attackers to trigger an abort.

IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) 10.5, 11.1, and 11.5 is vulnerable to denial of service with a specially crafted query on certain tables. IBM X-Force ID: 253361 .

Improper Input Validation vulnerability in Apache Software Foundation Apache Traffic Server.  The configuration option proxy.config.http.push_method_enabled didn't function.  However, by default the PUSH method is blocked in the ip_allow configuration file.This issue affects Apache Traffic Server: from 8.0.0 through 9.2.0. 8.x users should upgrade to 8.1.7 or later versions 9.x users should upgrade to 9.2.1 or later versions

IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) 11.1 and 11.5 federated server is vulnerable to a denial of service as the server may crash when using a specially crafted wrapper using certain options. IBM X-Force ID: 253202.

IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) 10.5, 11.1, and 11.5 is vulnerable to denial of service with a specially crafted query. IBM X-Force ID: 253439.

IBM DB2 for Linux, UNIX and Windows (includes Db2 Connect Server) 10.5, 11.1, and 11.5 is vulnerable to denial of service with a specially crafted query on certain tables. IBM X-Force ID: 253437.

A vulnerability in the TCP proxy functionality for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to an error in TCP-based packet inspection, which could cause the TCP packet to have an invalid Layer 2 (L2)-formatted header. An attacker could exploit this vulnerability by sending a crafted TCP packet sequence to the targeted device. A successful exploit could allow the attacker to cause a DoS condition.

Third Reality Smart Blind 1.00.54 contains a denial-of-service vulnerability, which allows a remote attacker to send malicious Zigbee messages to a vulnerable device and cause crashes.

GE PACSystems RX3i CPE100/115: All versions prior to R9.85,CPE302/305/310/330/400/410: All versions prior to R9.90,CRU/320 All versions(End of Life) may allow an attacker sending specially manipulated packets to cause the module state to change to halt-mode, resulting in a denial-of-service condition. An operator must reboot the CPU module after removing battery or energy pack to recover from halt-mode.

The Rockwell Automation Thinmanager Thinserver is impacted by an improper input validation vulnerability, Due to improper input validation, a path traversal vulnerability exists when the ThinManager software processes a certain function. If exploited, an unauthenticated remote threat actor can delete arbitrary files with system privileges. A malicious user could exploit this vulnerability by sending a specifically crafted synchronization protocol message resulting in a denial-of-service condition.

Specially crafted string can cause a buffer overrun in the JSON parser library leading to a crash of the Zabbix Server or a Zabbix Proxy.

IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) 11.1, and 11.5 is vulnerable to a denial of service through a specially crafted federated query on specific federation objects. IBM X-Force ID: 252048.

IBM DB2 for Linux, UNIX and Windows (includes Db2 Connect Server) 10.5, 11.1, and 11.5 is vulnerable to a denial of service as it may trap when compiling a variation of an anonymous block. IBM X-Force ID: 251991.

The Rockwell Automation Thinmanager Thinserver is impacted by an improper input validation vulnerability, an integer overflow condition exists in the affected products. When the ThinManager processes incoming messages, a read access violation occurs and terminates the process. A malicious user could exploit this vulnerability by sending a crafted synchronization protocol message and causing a denial of service condition in the software.

Integer overflow in the netsnmp_create_subtree_cache function in agent/snmp_agent.c in net-snmp 5.4 before 5.4.2.1, 5.3 before 5.3.2.3, and 5.2 before 5.2.5.1 allows remote attackers to cause a denial of service (crash) via a crafted SNMP GETBULK request, which triggers a heap-based buffer overflow, related to the number of responses or repeats.

OpenSIPS is a Session Initiation Protocol (SIP) server implementation. Prior to versions 3.1.8 and 3.2.5, when a specially crafted SIP message is processed by the function `rewrite_ruri`, a crash occurs due to a segmentation fault. This issue causes the server to crash. It affects configurations containing functions that make use of the affected code, such as the function `setport`. This issue has been fixed in version 3.1.8 and 3.2.5.

An issue was discovered on Samsung mobile devices with KK(4.4), L(5.0/5.1), and M(6.0) software. The InputMethod application can cause a system crash via a malformed serializable object in an Intent. The Samsung ID is SVE-2016-7123 (February 2017).

OpenSIPS is a Session Initiation Protocol (SIP) server implementation. Prior to versions 3.1.9 and 3.2.6, if `ds_is_in_list()` is used with an invalid IP address string (`NULL` is illegal input), OpenSIPS will attempt to print a string from a random address (stack garbage), which could lead to a crash. All users of `ds_is_in_list()` without the `$si` variable as 1st parameter could be affected by this vulnerability to a larger, lesser or no extent at all, depending if the data passed to the function is a valid IPv4 or IPv6 address string or not. Fixes will are available starting with the 3.1.9 and 3.2.6 minor releases. There are no known workarounds.

Microsoft Message Queuing (MSMQ) Denial of Service Vulnerability

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, the OAuth filter assumes that a `state` query param is present on any response that looks like an OAuth redirect response. Sending it a request with the URI path equivalent to the redirect path, without the `state` parameter, will lead to abnormal termination of Envoy process. Versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9 contain a patch. The issue can also be mitigated by locking down OAuth traffic, disabling the filter, or by filtering traffic before it reaches the OAuth filter (e.g. via a lua script).

IBM MQ 9.0 LTS, 9.1 LTS, 9.2 LTS, 9.3 LTS, 9.2 CD, and 9.3 CD and IBM MQ Appliance 9.2 LTS, 9.3 LTS, 9.2 CD, and 9.2 LTS, under certain configurations, is vulnerable to a denial of service attack caused by an error processing messages. IBM X-Force ID: 250397.