A vulnerability has been found in MarkText up to 0.17.1 and classified as problematic. Affected by this vulnerability is the function getRecommendTitleFromMarkdownString of the file marktext/src/main/utils/index.js. The manipulation leads to inefficient regular expression complexity. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

An uncontrolled resource consumption vulnerability in the web server of Zyxel DX3301-T0 firmware version 5.50(ABVY.6.3)C0 and earlier could allow an attacker to perform Slowloris‑style denial‑of‑service (DoS) attacks. Such attacks may temporarily block legitimate HTTP requests and partially disrupt access to the web management interface, while other networking services remain unaffected.

A weakness has been identified in CodeMirror up to 5.65.20. Affected is an unknown function of the file mode/markdown/markdown.js of the component Markdown Mode. This manipulation causes inefficient regular expression complexity. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be exploited. Upgrading to version 6.0 is able to address this issue. You should upgrade the affected component. Not all code samples mentioned in the GitHub issue can be found. The repository mentions, that "CodeMirror 6 exists, and is [...] much more actively maintained."

A vulnerability was found in Braces versions 2.2.0 and above, prior to 2.3.1. Affected versions of this package are vulnerable to Regular Expression Denial of Service (ReDoS) attacks.

fs2 is a compositional, streaming I/O library for Scala. Versions up to and including 2.5.12, 3.0.0-M1 through 3.12.2, and 3.13.0-M1 through 3.13.0-M6 are vulnerable to denial of service attacks though TLS sessions using fs2-io on the JVM using the fs2.io.net.tls package. When establishing a TLS session, if one side of the connection shuts down `write` while the peer side is awaiting more data to progress the TLS handshake, the peer side will spin loop on the socket read, fully utilizing a CPU. The CPU is consumed until the overall connection is closed, potentially shutting down a fs2-io powered server. This issue is fixed in versions 2.5.13, 3.12.1, and 3.13.0-M7.

It was discovered that the is-my-json-valid JavaScript library used an inefficient regular expression to validate JSON fields defined to have email format. A specially crafted JSON file could cause it to consume an excessive amount of CPU time when validated.

A flaw was found in AMQ Broker. This issue can cause a partial interruption to the availability of AMQ Broker via an Out of memory (OOM) condition. This flaw allows an attacker to partially disrupt availability to the broker through a sustained attack of maliciously crafted messages. The highest threat from this vulnerability is system availability.

A vulnerability has been identified in SIPROTEC 5 6MD84 (CP300) (All versions < V9.50), SIPROTEC 5 6MD85 (CP200) (All versions), SIPROTEC 5 6MD85 (CP300) (All versions < V9.50), SIPROTEC 5 6MD86 (CP200) (All versions), SIPROTEC 5 6MD86 (CP300) (All versions < V9.50), SIPROTEC 5 6MD89 (CP300) (All versions < V9.64), SIPROTEC 5 6MU85 (CP300) (All versions < V9.50), SIPROTEC 5 7KE85 (CP200) (All versions), SIPROTEC 5 7KE85 (CP300) (All versions < V9.64), SIPROTEC 5 7SA82 (CP100) (All versions < V8.90), SIPROTEC 5 7SA82 (CP150) (All versions < V9.50), SIPROTEC 5 7SA84 (CP200) (All versions), SIPROTEC 5 7SA86 (CP200) (All versions), SIPROTEC 5 7SA86 (CP300) (All versions < V9.50), SIPROTEC 5 7SA87 (CP200) (All versions), SIPROTEC 5 7SA87 (CP300) (All versions < V9.50), SIPROTEC 5 7SD82 (CP100) (All versions < V8.90), SIPROTEC 5 7SD82 (CP150) (All versions < V9.50), SIPROTEC 5 7SD84 (CP200) (All versions), SIPROTEC 5 7SD86 (CP200) (All versions), SIPROTEC 5 7SD86 (CP300) (All versions < V9.50), SIPROTEC 5 7SD87 (CP200) (All versions), SIPROTEC 5 7SD87 (CP300) (All versions < V9.50), SIPROTEC 5 7SJ81 (CP100) (All versions < V8.89), SIPROTEC 5 7SJ81 (CP150) (All versions < V9.50), SIPROTEC 5 7SJ82 (CP100) (All versions < V8.89), SIPROTEC 5 7SJ82 (CP150) (All versions < V9.50), SIPROTEC 5 7SJ85 (CP200) (All versions), SIPROTEC 5 7SJ85 (CP300) (All versions < V9.50), SIPROTEC 5 7SJ86 (CP200) (All versions), SIPROTEC 5 7SJ86 (CP300) (All versions < V9.50), SIPROTEC 5 7SK82 (CP100) (All versions < V8.89), SIPROTEC 5 7SK82 (CP150) (All versions < V9.50), SIPROTEC 5 7SK85 (CP200) (All versions), SIPROTEC 5 7SK85 (CP300) (All versions < V9.50), SIPROTEC 5 7SL82 (CP100) (All versions < V8.90), SIPROTEC 5 7SL82 (CP150) (All versions < V9.50), SIPROTEC 5 7SL86 (CP200) (All versions), SIPROTEC 5 7SL86 (CP300) (All versions < V9.50), SIPROTEC 5 7SL87 (CP200) (All versions), SIPROTEC 5 7SL87 (CP300) (All versions < V9.50), SIPROTEC 5 7SS85 (CP200) (All versions), SIPROTEC 5 7SS85 (CP300) (All versions < V9.50), SIPROTEC 5 7ST85 (CP200) (All versions), SIPROTEC 5 7ST85 (CP300) (All versions < V9.64), SIPROTEC 5 7ST86 (CP300) (All versions < V9.64), SIPROTEC 5 7SX82 (CP150) (All versions < V9.50), SIPROTEC 5 7SX85 (CP300) (All versions < V9.50), SIPROTEC 5 7UM85 (CP300) (All versions < V9.50), SIPROTEC 5 7UT82 (CP100) (All versions < V8.90), SIPROTEC 5 7UT82 (CP150) (All versions < V9.50), SIPROTEC 5 7UT85 (CP200) (All versions), SIPROTEC 5 7UT85 (CP300) (All versions < V9.50), SIPROTEC 5 7UT86 (CP200) (All versions), SIPROTEC 5 7UT86 (CP300) (All versions < V9.50), SIPROTEC 5 7UT87 (CP200) (All versions), SIPROTEC 5 7UT87 (CP300) (All versions < V9.50), SIPROTEC 5 7VE85 (CP300) (All versions < V9.50), SIPROTEC 5 7VK87 (CP200) (All versions), SIPROTEC 5 7VK87 (CP300) (All versions < V9.50), SIPROTEC 5 7VU85 (CP300) (All versions < V9.50), SIPROTEC 5 Communication Module ETH-BA-2EL (Rev.1) (All versions installed on CP200 devices), SIPROTEC 5 Communication Module ETH-BA-2EL (Rev.1) (All versions < V9.50 installed on CP150 and CP300 devices), SIPROTEC 5 Communication Module ETH-BA-2EL (Rev.1) (All versions < V8.89 installed on CP100 devices), SIPROTEC 5 Communication Module ETH-BB-2FO (Rev. 1) (All versions installed on CP200 devices), SIPROTEC 5 Communication Module ETH-BB-2FO (Rev. 1) (All versions < V9.50 installed on CP150 and CP300 devices), SIPROTEC 5 Communication Module ETH-BB-2FO (Rev. 1) (All versions < V8.89 installed on CP100 devices), SIPROTEC 5 Communication Module ETH-BD-2FO (All versions < V9.50), SIPROTEC 5 Compact 7SX800 (CP050) (All versions < V9.50). Affected devices do not properly restrict secure client-initiated renegotiations within the SSL and TLS protocols. This could allow an attacker to create a denial of service condition on the ports 443/tcp and 4443/tcp for the duration of the attack.

lestrrat-go/jwx is a Go module implementing various JWx (JWA/JWE/JWK/JWS/JWT, otherwise known as JOSE) technologies. A p2c parameter set too high in JWE's algorithm PBES2-* could lead to a denial of service. The JWE key management algorithms based on PBKDF2 require a JOSE Header Parameter called p2c (PBES2 Count). This parameter dictates the number of PBKDF2 iterations needed to derive a CEK wrapping key. Its primary purpose is to intentionally slow down the key derivation function, making password brute-force and dictionary attacks more resource- intensive. Therefore, if an attacker sets the p2c parameter in JWE to a very large number, it can cause a lot of computational consumption, resulting in a denial of service. This vulnerability has been addressed in commit `64f2a229b` which has been included in release version 1.2.27 and 2.0.18. Users are advised to upgrade. There are no known workarounds for this vulnerability.

There exists a security vulnerability in Jetty's DosFilter which can be exploited by unauthorized users to cause remote denial-of-service (DoS) attack on the server using DosFilter. By repeatedly sending crafted requests, attackers can trigger OutofMemory errors and exhaust the server's memory finally.

The swctrl service is used to detect and remotely manage PLANET Technology devices. Certain switch models have a Denial-of-Service vulnerability in the swctrl service, allowing unauthenticated remote attackers to send crafted packets that can crash the service.

Cosign is a sigstore signing tool for OCI containers. Cosign is susceptible to a denial of service by an attacker controlled registry. An attacker who controls a remote registry can return a high number of attestations and/or signatures to Cosign and cause Cosign to enter a long loop resulting in an endless data attack. The root cause is that Cosign loops through all attestations fetched from the remote registry in pkg/cosign.FetchAttestations. The attacker needs to compromise the registry or make a request to a registry they control. When doing so, the attacker must return a high number of attestations in the response to Cosign. The result will be that the attacker can cause Cosign to go into a long or infinite loop that will prevent other users from verifying their data. In Kyvernos case, an attacker whose privileges are limited to making requests to the cluster can make a request with an image reference to their own registry, trigger the infinite loop and deny other users from completing their admission requests. Alternatively, the attacker can obtain control of the registry used by an organization and return a high number of attestations instead the expected number of attestations. The issue can be mitigated rather simply by setting a limit to the limit of attestations that Cosign will loop through. The limit does not need to be high to be within the vast majority of use cases and still prevent the endless data attack. This issue has been patched in version 2.2.1 and users are advised to upgrade.

The Appointment Booking Calendar — Simply Schedule Appointments Booking Plugin plugin for WordPress is vulnerable to denial of service in all versions up to, and including, 1.6.11.5. This is due to a publicly accessible REST API endpoint (/wp-json/ssa/v1/async) that calls PHP's sleep() function on a user-supplied delay parameter without any rate limiting. This makes it possible for unauthenticated attackers to exhaust PHP worker processes, denying access to the site to legitimate users.

In mlflow/mlflow version v2.13.2, a vulnerability exists that allows the creation or renaming of an experiment with a large number of integers in its name due to the lack of a limit on the experiment name. This can cause the MLflow UI panel to become unresponsive, leading to a potential denial of service. Additionally, there is no character limit in the `artifact_location` parameter while creating the experiment.

An exploitable insufficient resource pool vulnerability exists in the session communication functionality of Allen Bradley Micrologix 1400 Series B Firmware 21.2 and before. A specially crafted stream of packets can cause a flood of the session resource pool resulting in legitimate connections to the PLC being disconnected. An attacker can send unauthenticated packets to trigger this vulnerability.

CISA Thorium does not rate limit requests to send account verification email messages. A remote unauthenticated attacker can send unlimited messages to a user who is pending verification. Fixed in 1.1.1 by adding a rate limit set by default to 10 minutes.

The multiScan and picoScan are vulnerable to a denial-of-service (DoS) attack. A remote attacker can exploit this vulnerability by conducting a Slowloris-type attack, causing the web page to become unresponsive.

An issue was discovered in Schneider Electric Magelis HMI Magelis GTO Advanced Optimum Panels, all versions, Magelis GTU Universal Panel, all versions, Magelis STO5xx and STU Small panels, all versions, Magelis XBT GH Advanced Hand-held Panels, all versions, Magelis XBT GK Advanced Touchscreen Panels with Keyboard, all versions, Magelis XBT GT Advanced Touchscreen Panels, all versions, and Magelis XBT GTW Advanced Open Touchscreen Panels (Windows XPe). An attacker can open multiple connections to a targeted web server and keep connections open preventing new connections from being made, rendering the web server unavailable during an attack.

Synapse before 1.52.0 with URL preview functionality enabled will attempt to generate URL previews for media stream URLs without properly limiting connection time. Connections will only be terminated after `max_spider_size` (default: 10M) bytes have been downloaded, which can in some cases lead to long-lived connections towards the streaming media server (for instance, Icecast). This can cause excessive traffic and connections toward such servers if their stream URL is, for example, posted to a large room with many Synapse instances with URL preview enabled. Version 1.52.0 implements a timeout mechanism which will terminate URL preview connections after 30 seconds. Since generating URL previews for media streams is not supported and always fails, 1.53.0 additionally implements an allow list for content types for which Synapse will even attempt to generate a URL preview. Upgrade to 1.53.0 to fully resolve the issue. As a workaround, turn off URL preview functionality by setting `url_preview_enabled: false` in the Synapse configuration file.

Rack is a modular Ruby web server interface. Prior to versions 2.2.23, 3.1.21, and 3.2.6, Rack::Utils.get_byte_ranges parses the HTTP Range header without limiting the number of individual byte ranges. Although the existing fix for CVE-2024-26141 rejects ranges whose total byte coverage exceeds the file size, it does not restrict the count of ranges. An attacker can supply many small overlapping ranges such as 0-0,0-0,0-0,... to trigger disproportionate CPU, memory, I/O, and bandwidth consumption per request. This results in a denial of service condition in Rack file-serving paths that process multipart byte range responses. This issue has been patched in versions 2.2.23, 3.1.21, and 3.2.6.

Dell PowerScale InsightIQ, version 5.2, contains an uncontrolled resource consumption vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to denial of service.

Nextcloud Server is an open source personal cloud server. Prior to versions 23.0.10 and 24.0.5, calendar name lengths are not validated before writing to a database. As a result, an attacker can send unnecessary amounts of data against the database. Version 23.0.10 and 24.0.5 contain patches for the issue. No known workarounds are available.

LiquidJS is a Shopify / GitHub Pages compatible template engine in pure JavaScript. Prior to 10.25.3, the replace filter in LiquidJS incorrectly accounts for memory usage when the memoryLimit option is enabled. It charges str.length + pattern.length + replacement.length bytes to the memory limiter, but the actual output from str.split(pattern).join(replacement) can be quadratically larger when the pattern occurs many times in the input string. This allows an attacker who controls template content to bypass the memoryLimit DoS protection with approximately 2,500x amplification, potentially causing out-of-memory conditions. This vulnerability is fixed in 10.25.3.

In cloud foundry CAPI versions prior to 1.122, a denial-of-service attack in which a developer can push a service broker that (accidentally or maliciously) causes CC instances to timeout and fail is possible. An attacker can leverage this vulnerability to cause an inability for anyone to push or manage apps.

An uncontrolled resource consumption issue when parsing URLs in GitLab CE/EE affecting all versions prior to 15.3.5, 15.4 prior to 15.4.4, and 15.5 prior to 15.5.2 allows an attacker to cause performance issues and potentially a denial of service on the GitLab instance.

Vulnerability in the Oracle Java SE, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: ImageIO). Supported versions that are affected are Oracle Java SE: 11.0.13, 17.0.1; Oracle GraalVM Enterprise Edition: 20.3.4 and 21.3.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Java SE, Oracle GraalVM Enterprise Edition. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability can also be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. CVSS 3.1 Base Score 5.3 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L).

OpenZeppelin Contracts is a library for secure smart contract development. The target contract of an EIP-165 `supportsInterface` query can cause unbounded gas consumption by returning a lot of data, while it is generally assumed that this operation has a bounded cost. The issue has been fixed in v4.7.2. Users are advised to upgrade. There are no known workarounds for this issue.

A vulnerability has been identified in SINEC INS (All versions < V1.0 SP2 Update 3). The affected application does not properly restrict the size of generated log files. This could allow an unauthenticated remote attacker to trigger a large amount of logged events to exhaust the system's resources and create a denial of service condition.

The resolver in nginx before 1.8.1 and 1.9.x before 1.9.10 does not properly limit CNAME resolution, which allows remote attackers to cause a denial of service (worker process resource consumption) via vectors related to arbitrary name resolution.

fugit contains time tools for flor and the floraison group. The fugit "natural" parser, that turns "every wednesday at 5pm" into "0 17 * * 3", accepted any length of input and went on attempting to parse it, not returning promptly, as expected. The parse call could hold the thread with no end in sight. Fugit dependents that do not check (user) input length for plausibility are impacted. A fix was released in fugit 1.11.1.

Multiple unauthenticated Denial-of-Service (DoS) vulnerabilities exist in the Soft AP daemon accessed via the PAPI protocol. Successful exploitation of these vulnerabilities results in the ability to interrupt the normal operation of the affected Access Point.

Multiple unauthenticated Denial-of-Service (DoS) vulnerabilities exist in the AP Certificate Management daemon accessed via the PAPI protocol. Successful exploitation of these vulnerabilities results in the ability to interrupt the normal operation of the affected Access Point.

REXML is an XML toolkit for Ruby. The REXML gem 3.3.2 has a DoS vulnerability when it parses an XML that has many entity expansions with SAX2 or pull parser API. The REXML gem 3.3.3 or later include the patch to fix the vulnerability.

The vCenter Server contains a denial-of-service vulnerability in the content library service. A malicious actor with network access to port 443 on vCenter Server may exploit this issue to trigger a denial-of-service condition by sending a specially crafted header.

In CODESYS Gateway Server V2 an insufficient check for the activity of TCP client connections allows an unauthenticated attacker to consume all available TCP connections and prevent legitimate users or clients from establishing a new connection to the CODESYS Gateway Server V2. Existing connections are not affected and therefore remain intact.

Hono is a Web application framework that provides support for any JavaScript runtime. In versions prior to 4.9.7, a flaw in the `bodyLimit` middleware could allow bypassing the configured request body size limit when conflicting HTTP headers were present. The middleware previously prioritized the `Content-Length` header even when a `Transfer-Encoding: chunked` header was also included. According to the HTTP specification, `Content-Length` must be ignored in such cases. This discrepancy could allow oversized request bodies to bypass the configured limit. Most standards-compliant runtimes and reverse proxies may reject such malformed requests with `400 Bad Request`, so the practical impact depends on the runtime and deployment environment. If body size limits are used as a safeguard against large or malicious requests, this flaw could allow attackers to send oversized request bodies. The primary risk is denial of service (DoS) due to excessive memory or CPU consumption when handling very large requests. The implementation has been updated to align with the HTTP specification, ensuring that `Transfer-Encoding` takes precedence over `Content-Length`. The issue is fixed in Hono v4.9.7, and all users should upgrade immediately.

RSSHub is an open source, extensible RSS feed generator. In commits prior to 5c4177441417 passing some special values to the `filter` and `filterout` parameters can cause an abnormally high CPU. This results in an impact on the performance of the servers and RSSHub services which may lead to a denial of service. This issue has been fixed in commit 5c4177441417 and all users are advised to upgrade. There are no known workarounds for this issue.

A vulnerability classified as problematic was found in Unitech pm2 up to 6.0.6. This vulnerability affects unknown code of the file /lib/tools/Config.js. The manipulation leads to inefficient regular expression complexity. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

SoftEtherVPN is a an open-source cross-platform multi-protocol VPN Program. When SoftEtherVPN is deployed with L2TP enabled on a device, it introduces the possibility of the host being used for amplification/reflection traffic generation because it will respond to every packet with two response packets that are larger than the request packet size. These sorts of techniques are used by external actors who generate spoofed source IPs to target a destination on the internet. This vulnerability has been patched in version 5.02.5185.

REXML is an XML toolkit for Ruby. The REXML gems from 3.3.3 to 3.4.1 has a DoS vulnerability when parsing XML containing multiple XML declarations. If you need to parse untrusted XMLs, you may be impacted to these vulnerabilities. The REXML gem 3.4.2 or later include the patches to fix these vulnerabilities.

A security flaw has been discovered in Open5GS up to 2.7.5. This issue affects some unknown processing of the component Timer Handler. The manipulation results in resource consumption. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks. The patch is identified as c7c131f8d2cb1195ada5e0e691b6868ebcd8a845. It is best practice to apply a patch to resolve this issue.

On F5 BIG-IP 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, when multiple route domains are configured, undisclosed requests to big3d can cause an increase in CPU resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

Spring MVC controller methods with an @RequestBody byte[] method parameter are vulnerable to a DoS attack.

python-jose through 3.3.0 allows attackers to cause a denial of service (resource consumption) during a decode via a crafted JSON Web Encryption (JWE) token with a high compression ratio, aka a "JWT bomb." This is similar to CVE-2024-21319.

The Multipass service was found to have code paths that could be abused to cause a denial of service for authentication or authorization operations. A malicious attacker could perform an application-level denial of service attack, potentially causing authentication and/or authorization operations to fail for the duration of the attack. This could lead to performance degradation or login failures for customer Palantir Foundry environments. This vulnerability is resolved in Multipass 3.647.0. This issue affects: Palantir Foundry Multipass versions prior to 3.647.0.

oak is a middleware framework for Deno's native HTTP server, Deno Deploy, Node.js 16.5 and later, Cloudflare Workers and Bun. In versions 17.1.5 and below, it's possible to significantly slow down an oak server with specially crafted values of the x-forwarded-proto or x-forwarded-for headers.

A mail message containing excessive amount of RFC 2231 MIME parameters causes LMTP to use too much CPU. A suitably formatted mail message causes mail delivery process to consume large amounts of CPU time. Use MTA capabilities to limit RFC 2231 MIME parameters in mail messages, or upgrade to fixed version where the processing is limited. No publicly available exploits are known.

On F5 BIG-IP APM 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, when APM is configured on a virtual server and the associated access profile is configured with APM AAA NTLM Auth, undisclosed requests can cause an increase in internal resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

On F5 BIG-IP 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, and 14.1.x versions prior to 14.1.4.6, when BIG-IP packet filters are enabled and a virtual server is configured with the type set to Reject, undisclosed requests can cause an increase in memory resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

Bref is an open-source project that helps users go serverless on Amazon Web Services with PHP. When Bref prior to version 2.1.17 is used with the Event-Driven Function runtime and the handler is a `RequestHandlerInterface`, then the Lambda event is converted to a PSR7 object. During the conversion process, if the request is a MultiPart, each part is parsed. In the parsing process, the `Content-Type` header of each part is read using the `Riverline/multipart-parser` library. The library, in the `StreamedPart::parseHeaderContent` function, performs slow multi-byte string operations on the header value. Precisely, the `mb_convert_encoding` function is used with the first (`$string`) and third (`$from_encoding`) parameters read from the header value. An attacker could send specifically crafted requests which would force the server into performing long operations with a consequent long billed duration. The attack has the following requirements and limitations: The Lambda should use the Event-Driven Function runtime and the `RequestHandlerInterface` handler and should implement at least an endpoint accepting POST requests; the attacker can send requests up to 6MB long (this is enough to cause a billed duration between 400ms and 500ms with the default 1024MB RAM Lambda image of Bref); and if the Lambda uses a PHP runtime <= php-82, the impact is higher as the billed duration in the default 1024MB RAM Lambda image of Bref could be brought to more than 900ms for each request. Notice that the vulnerability applies only to headers read from the request body as the request header has a limitation which allows a total maximum size of ~10KB. Version 2.1.17 contains a fix for this issue.