A flaw was found in 389-ds-base. The get_ldapmessage_controls_ext() function in the LDAP server does not enforce an upper bound on the number of controls per LDAP message. A remote, unauthenticated attacker can send a specially crafted LDAP request containing hundreds of thousands of minimal controls within the default maximum BER message size (2 MB), causing excessive CPU consumption and heap allocation on the server. Under concurrent exploitation, this leads to significant latency degradation, worker thread starvation, or out-of-memory termination, resulting in a denial of service.

Impact: The undici WebSocket client enforces maxPayloadSize per-frame but does not enforce the cumulative size of fragmented uncompressed messages. A malicious WebSocket server can stream many small fragments that each pass per-frame validation but collectively exceed the configured limit, causing unbounded memory growth in the client process. The result is memory exhaustion and a denial of service. Affected applications are those using the undici WebSocket client (new WebSocket(...)) that can be induced to connect to an attacker-controlled or compromised WebSocket endpoint. This is a regression specific to undici 8.1.0. The 6.25.0 line shipped the equivalent cumulative check from the start and is unaffected. The 7.x line never had the maxPayloadSize feature and is also unaffected. Patches: Upgrade to undici >= 8.5.0. Workarounds: No workaround is available. The fix must be applied through an upgrade.

Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, RedisArrayAggregator pre-allocates ArrayList with initial capacity equal to the RESP array element count declared in an array header. That count is taken from the wire before the corresponding child messages exist. A small malicious header can claim a huge initial capacity. Versions 4.1.135.Final and 4.2.15.Final patch the issue.

Mistune is a Python Markdown parser with renderers and plugins. Prior to 3.3.0, Mistune is vulnerable to a CPU exhaustion DoS due to superlinear (approximately O(n²)) behavior in parse_link_text. When parsing Markdown containing many consecutive [ characters, parse_link_text repeatedly scans the input using a regex search inside a loop. Each iteration re-scans a large portion of the remaining string, resulting in quadratic-time behavior. An attacker-controlled Markdown input can therefore trigger excessive CPU usage with a very small payload. This vulnerability is fixed in 3.3.0.

In PHP versions 8.2.* before 8.2.31, 8.3.* before 8.3.31, 8.4.* before 8.4.21, and 8.5.* before 8.5.6, the metaphone() function in ext/standard/metaphone.c uses a signed int variable to track the current position within the input string. If a string longer than 2,147,483,647 bytes is passed, a signed integer overflow occurs, resulting in undefined behavior. This can lead to an out-of-bounds read, causing a segmentation fault or access to unrelated memory, and may affect the availability of the PHP process.

Netty is a network application framework for development of protocol servers and clients. Prior to version 4.2.15.Final, a memory exhaustion vulnerability in the Netty HTTP/3 codec allows the creation of an infinite number of blocked streams, which can cause OOM error. Version 4.2.15.Final patches the issue.

Netty is a network application framework for development of protocol servers and clients. In netty-codec-redis prior to versions 4.1.135.Final and 4.2.15.Final, an attacker can cause DoS by sending a crafted Redis payload with deeply nested arrays. This forces the server to allocate a massive number of state objects and collections, leading to memory exhaustion and an OutOfMemoryError. Versions 4.1.135.Final and 4.2.15.Final patch the issue.

iskorotkov/avro is a fast Go Avro codec. Prior to 2.33.0, several Avro decoder paths read attacker-controlled 64-bit values from the wire format and either narrowed them to platform-sized int before bounds-checking, or summed them with overflow-prone signed-int arithmetic. On 32-bit targets (GOARCH=386, arm, mips, wasm, etc.), the truncation paths can silently bypass byte-slice limits, select the wrong union branch, or hit the OCF negative-make panic via wrap. Three sub-issues are not 32-bit-specific: cumulative-size arithmetic overflow in arrayDecoder.Decode / mapDecoder.Decode / mapDecoderUnmarshaler.Decode (wraps at math.MaxInt64 on amd64 / arm64 and bypasses MaxSliceAllocSize / MaxMapAllocSize), math.MinInt negation in block-header handling, and make([]byte, size) with a negative size in OCF block reads — all three panic or bypass caps on any platform, giving an attacker a denial-of-service primitive there. This vulnerability is fixed in 2.33.0.

Incorrect boundary conditions, integer overflow in the Graphics component. This vulnerability was fixed in Firefox 149, Firefox ESR 115.34, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9.

Netty is a network application framework for development of protocol servers and clients. In versions of netty-transport-sctp prior to 4.1.135.Final and 4.2.15.Final, for each non-complete SctpMessage fragment the handler does `fragments.put(streamId, Unpooled.wrappedBuffer(frag, byteBuf))`, wrapping the previous accumulator and the new slice into a *new* CompositeByteBuf every time. After N fragments the accumulator is an N-deep chain of composites, each holding references and component arrays; readableBytes()/getBytes() on the final buffer recurse N levels. There is no limit on N, on total bytes, or on the number of streamIdentifiers an attacker can open (each gets its own map entry). A peer that never sets the `complete` flag can grow this structure indefinitely from tiny 1-byte DATA chunks. Versions 4.1.135.Final and 4.2.15.Final patch the issue.

Uncontrolled resource consumption in ASP.NET Core allows an unauthorized attacker to deny service over a network.

libyang is a YANG data modeling language library. Prior to SO 5.2.15, lyb_read_string() in src/parser_lyb.c contains an integer overflow that results in a heap buffer overflow when parsing a maliciously crafted LYB binary blob. An attacker who can supply LYB data to any libyang consumer (NETCONF server, sysrepo, etc.) can trigger a crash or potential heap corruption. This vulnerability is fixed in SO 5.2.15.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-47 and 7.1.2-22, because of a missing check in the MNG coder it would be possible to read more images than the list limit policy would allow resulting in excessive resource use. This issue has been patched in versions 6.9.13-47 and 7.1.2-22.

Netty is a network application framework for development of protocol servers and clients. In netty-codec-redis prior to versions 4.1.135.Final and 4.2.15.Final, an attacker can cause DoS by sending crafted Redis payloads across multiple connections without `\r\n`. This exhausts the server's direct memory pool (OutOfDirectMemoryError), preventing legitimate connections from being processed. Versions 4.1.135.Final and 4.2.15.Final patch the issue.

Vault is vulnerable to a denial-of-service condition where an unauthenticated attacker can repeatedly initiate or cancel root token generation or rekey operations, occupying the single in-progress operation slot. This prevents legitimate operators from completing these workflows. This vulnerability, CVE-2026-5807, is fixed in Vault Community Edition 2.0.0 and Vault Enterprise 2.0.0.

AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Versions 3.13.2 and below allow a zip bomb to be used to execute a DoS against the AIOHTTP server. An attacker may be able to send a compressed request that when decompressed by AIOHTTP could exhaust the host's memory. This issue is fixed in version 3.13.3.

During chain building, the amount of work that is done is not correctly limited when a large number of intermediate certificates are passed in VerifyOptions.Intermediates, which can lead to a denial of service. This affects both direct users of crypto/x509 and users of crypto/tls.

If one side of the TLS connection sends multiple key update messages post-handshake in a single record, the connection can deadlock, causing uncontrolled consumption of resources. This can lead to a denial of service. This only affects TLS 1.3.

Well-crafted inputs reaching ParseAddress, ParseAddressList, and ParseDate were able to trigger excessive CPU exhaustion and memory allocations.

Python-Multipart is a streaming multipart parser for Python. Prior to 0.0.27, python-multipart has a denial of service vulnerability in multipart part header parsing. When parsing multipart/form-data, MultipartParser previously had no limit on the number of part headers or the size of an individual part header. An attacker could send a request with either many repeated headers without terminating the header block or a single very large header value, causing excessive CPU work before request rejection or completion. This vulnerability is fixed in 0.0.27.

Netty is an asynchronous, event-driven network application framework. Prior to 4.2.13.Final and 4.1.133.Final, HttpContentDecompressor accepts a maxAllocation parameter to limit decompression buffer size and prevent decompression bomb attacks. This limit is correctly enforced for gzip and deflate encodings via ZlibDecoder, but is silently ignored when the content encoding is br (Brotli), zstd, or snappy. An attacker can bypass the configured decompression limit by sending a compressed payload with Content-Encoding: br instead of Content-Encoding: gzip, causing unbounded memory allocation and out-of-memory denial of service. The same vulnerability exists in DelegatingDecompressorFrameListener for HTTP/2 connections. This vulnerability is fixed in 4.2.13.Final and 4.1.133.Final.

A flaw was found in libsoup. The SoupWebsocketConnection may accept a large WebSocket message, which may cause libsoup to allocate memory and lead to a denial of service (DoS).

If a BIND resolver is performing DNSSEC validation and encounters a maliciously crafted zone, the resolver may consume excessive CPU. Authoritative-only servers are generally unaffected, although there are circumstances where authoritative servers may make recursive queries (see: https://kb.isc.org/docs/why-does-my-authoritative-server-make-recursive-queries). This issue affects BIND 9 versions 9.11.0 through 9.16.50, 9.18.0 through 9.18.46, 9.20.0 through 9.20.20, 9.21.0 through 9.21.19, 9.11.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.46-S1, and 9.20.9-S1 through 9.20.20-S1.

Netty is an asynchronous, event-driven network application framework. In versions prior to 4.1.132.Final and 4.2.10.Final, a remote user can trigger a Denial of Service (DoS) against a Netty HTTP/2 server by sending a flood of `CONTINUATION` frames. The server's lack of a limit on the number of `CONTINUATION` frames, combined with a bypass of existing size-based mitigations using zero-byte frames, allows an user to cause excessive CPU consumption with minimal bandwidth, rendering the server unresponsive. Versions 4.1.132.Final and 4.2.10.Final fix the issue.

OOM Denial of Service via Unbounded Array Allocation in Apache OpenNLP AbstractModelReader  Versions Affected:  before 1.9.5 before 2.5.9 before 3.0.0-M3  Description: The AbstractModelReader methods getOutcomes(), getOutcomePatterns(), and getPredicates() each read a 32-bit signed integer count field from a binary model stream and pass that value directly to an array allocation (new String[numOutcomes], new int[numOCTypes][], new String[NUM_PREDS]) without validating that the value is non-negative or within a reasonable bound. The count is therefore fully attacker-controlled when the model file originates from an untrusted source. A crafted .bin model file in which any of these count fields is set to Integer.MAX_VALUE (or any value large enough to exhaust the available heap) triggers an OutOfMemoryError at the array allocation itself, before the corresponding label or pattern data is consumed from the stream. The error occurs very early in deserialization: for a GIS model, getOutcomes() is reached after only the model-type string, the correction constant, and the correction parameter have been read; so the attacker pays no meaningful size cost to weaponize a payload, and a single small file can crash a JVM that loads it. Any code path that deserializes a .bin model is affected, including direct use of GenericModelReader and any higher-level component that delegates to it during model load. The practical impact is denial of service against processes that load model files from untrusted or semi-trusted origins.   Mitigation: * 2.x users should upgrade to 2.5.9. * 3.x users should upgrade to 3.0.0-M3. Note: The fix introduces an upper bound on each of the three count fields, checked before array allocation; counts that are negative or exceed the bound cause an IllegalArgumentException to be thrown and the read to fail fast with no large allocation. The default bound is 10,000,000, which is well above the entry counts of legitimate OpenNLP models but far below any value that would threaten heap exhaustion. Deployments that legitimately need to load models with more entries than the default can raise the limit at JVM startup by setting the OPENNLP_MAX_ENTRIES system property to the desired positive integer (e.g. -DOPENNLP_MAX_ENTRIES=50000000); invalid or non-positive values fall back to the default. Users who cannot upgrade immediately should treat all .bin model files as untrusted input unless their provenance is verified, and should avoid loading models supplied by end users or fetched from third-party repositories without integrity checks.

Next.js is a React framework for building full-stack web applications. From 10.0.0 to before 15.5.16 and 16.2.5, when self-hosting Next.js with the default image loader, the Image Optimization API fetches local images entirely into memory without enforcing a maximum size limit. An attacker could cause out-of-memory conditions by requesting large local assets from the /_next/image endpoint that match the images.localPatterns configuration (by default, all patterns are allowed). This vulnerability is fixed in 15.5.16 and 16.2.5.

Next.js is a React framework for building full-stack web applications. From to before 15.5.16 and 16.2.5, applications using Partial Prerendering through the Cache Components feature can be vulnerable to connection exhaustion through crafted POST requests to a server action. In affected configurations, a malicious request can trigger a request-body handling deadlock that leaves connections open for an extended period, consuming file descriptors and server capacity until legitimate users are denied service. This vulnerability is fixed in 15.5.16 and 16.2.5.

opentelemetry-java is the Java implementation of the OpenTelemetry API for recording telemetry, and SDK for managing telemetry recorded by the API. Prior to 1.62.0, a vulnerability affects the baggage propagation implementation in opentelemetry-api and opentelemetry-extension-trace-propagators. Parsing oversized baggage causes unbounded memory allocation and CPU consumption. Because baggage is automatically re-injected into every outgoing request, the effect can fan out to downstream services that never received the original malicious request. This vulnerability is fixed in 1.62.0.

vLLM versions 0.8.0 and later are vulnerable to an Out-of-Memory (OOM) Denial of Service (DoS) attack due to unbounded frame count processing in the `VideoMediaIO.load_base64()` method. When processing `video/jpeg` data URLs, the method splits the base64 data string on commas to extract individual JPEG frames without enforcing a frame count limit. An attacker can exploit this by crafting a single API request containing thousands of comma-separated base64-encoded JPEG frames in a data URL, causing the server to decode all frames into memory and crash due to excessive memory consumption. This vulnerability is reachable via the OpenAI-compatible chat completions API and does not require authentication.

Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, SslClientHelloHandler.decode() reads the 24-bit TLS handshake length and, when the ClientHello does not fit in the first record, eagerly allocates `ctx.alloc().buffer(handshakeLength)` (line 161). The guard at line 140 is `handshakeLength > maxClientHelloLength && maxClientHelloLength != 0`, and the commonly-used SniHandler/AbstractSniHandler constructors (SniHandler(Mapping), SniHandler(AsyncMapping), AbstractSniHandler()) pass maxClientHelloLength=0 and handshakeTimeoutMillis=0, so the length guard is disabled and no timeout is scheduled. A 16 MiB request exceeds the default pooled chunk size and becomes a huge/unpooled allocation performed immediately. The buffer is retained in the handler until the channel closes. Versions 4.1.135.Final and 4.2.15.Final patch the issue.

vm2 is an open source vm/sandbox for Node.js. Prior to 3.11.0, sandboxed code can call Buffer.alloc() with an arbitrary size to allocate memory directly on the host heap. Because Buffer.alloc is a synchronous C++ native call, vm2's timeout option cannot interrupt it. A single request can exhaust host memory and crash the process with a FATAL ERROR: Reached heap limit. This vulnerability is fixed in 3.11.0.

Wasmtime is a runtime for WebAssembly. From 30.0.0 to 36.0.8, 43.0.2, and 44.0.1, Wasmtime's allocation logic for a WebAssembly table contained checked arithmetic which panicked on overflow. This overflow is possible to trigger, and thus panic, when a table with an extremely large size is allocated. This is possible with the WebAssembly memory64 proposal where tables can have sizes in the 64-bit range as opposed to the previous 32-bit range which would not overflow. The panic happens when attempting to create a very large table, such as when instantiating a WebAssembly module or component. This vulnerability is fixed in 36.0.8, 43.0.2, and 44.0.1.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-50 and 7.1.2-25, a missing check for maximum memory request in AcquireAlignedMemory could trigger an out-of-Memory condition. This issue has been patched in versions 6.9.13-50 and 7.1.2-25.

Prometheus is an open-source monitoring system and time series database. Prior to versions 3.5.3 and 3.11.3, the remote read endpoint (/api/v1/read) does not validate the declared decoded length in a snappy-compressed request body before allocating memory. An unauthenticated attacker can send a small payload that causes a huge heap allocation per request. Under concurrent load this can exhaust available memory and crash the Prometheus process. This issue has been patched in versions 3.5.3 and 3.11.3.

Faraday is an HTTP client library abstraction layer that provides a common interface over many adapters. From 1.0.0 until 1.10.6 and 2.14.3, Faraday::NestedParamsEncoder, the default nested query parameter encoder/decoder in Faraday, decodes nested query strings without enforcing a maximum nesting depth. A crafted query string causes Faraday to build a deeply nested Ruby Hash structure. The internal dehash routine then recursively walks this attacker-controlled structure without a depth limit. At sufficient depth, Ruby raises an uncaught SystemStackError (stack level too deep), crashing the calling thread or worker. This can lead to denial of service in applications that pass attacker-controlled query strings to Faraday's nested query parsing or URL-building paths. This vulnerability is fixed in 1.10.6 and 2.14.3.

In OpenStack Ironic 32 before 37.0.0, an unauthenticated malicious user could submit a crafted JSON string to some endpoints on the API or JSON-RPC service and effect a service crash.

ws is an open source WebSocket client and server for Node.js. All versions from 1.1.0 up to (but not including) 5.2.5, from 6.0.0 up to 6.2.4, from 7.0.0 up to 7.5.11, and from 8.0.0 up to 8.21.0 are affected by a memory exhaustion DoS vulnerability. A peer can send a high volume of exceptionally small fragments and data chunks, with modest network traffic, to force the remote peer into allocating and holding structural wrappers that consume far more memory than the default documented message-size limit, leading to process termination due to OOM. This issue has been fixed in versions 5.2.5, 6.2.4, 7.5.11, and 8.21.0.

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.35.11, 1.36.7, 1.37.3, and 1.38.1, a vulnerability in Envoy's HTTP/2 downstream request processing allows an unauthenticated remote client to trigger excessive memory consumption, potentially resulting in OOM termination of the Envoy process and denial of service. The issue arises from the combination of two behaviors. First, cookie header bytes are not fully accounted for during request header size validation in Envoy. Second, HPACK header block limits in oghttp2/quiche are enforced on encoded bytes without a corresponding limit on total decoded header size. Together, these behaviors allow a malicious client to cause large decoded header allocations while bypassing the intended request header size protections. Versions 1.35.11, 1.36.7, 1.37.3, and 1.38.1 contain a fix. No complete workaround is known short of applying a fix. Possible temporary mitigations include disabling downstream HTTP/2 where operationally feasible; enforcing stricter request header and cookie limits before traffic reaches Envoy; and monitoring Envoy memory usage for abnormal growth under HTTP/2 traffic.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-47 and 7.1.2-22, due to a missing check in the PSD decoder it would be possible to bypass the list-length resource policy when decoding a PSD image. Other security limits would still apply. This issue has been patched in versions 6.9.13-47 and 7.1.2-22.

Netty is an asynchronous, event-driven network application framework. Prior to 4.2.13.Final and 4.1.133.Final, the MQTT 5 header Properties section is parsed and buffered before any message size limit is applied. Specifically, in MqttDecoder, the decodeVariableHeader() method is called before the bytesRemainingBeforeVariableHeader > maxBytesInMessage check. The decodeVariableHeader() can call other methods which will call decodeProperties(). Effectively, Netty does not apply any limits to the size of the properties being decoded. Additionally, because MqttDecoder extends ReplayingDecoder, Netty will repeatedly re-parse the enormous Properties sections and buffer the bytes in memory, until the entire thing parses to completion. This can cause high resource usage in both CPU and memory. This vulnerability is fixed in 4.2.13.Final and 4.1.133.Final.

pgjdbc is an open source postgresql JDBC Driver. From version 42.2.0 to before version 42.7.11, pgjdbc is vulnerable to a client-side denial of service during SCRAM-SHA-256 authentication. A malicious server can instruct the driver to perform SCRAM authentication with a very large iteration count. With a large enough value, the client spends an unbounded amount of CPU time inside PBKDF2 before authentication can fail. A single attempt ties up a CPU core. Repeated or concurrent attempts exhaust client CPU and can wedge connection pools. In affected versions, loginTimeout did not fully mitigate this problem. When loginTimeout expired, the caller could stop waiting, but the worker thread performing the connection attempt could continue running and burning CPU inside the SCRAM PBKDF2 computation. This issue has been patched in version 42.7.11.