Next.js is a React framework for building full-stack web applications. From 12.2.0 to before 15.5.16 and 16.2.5, an external client could send a x-nextjs-data header on a normal request to a path handled by middleware that returns a redirect. When that happened, the middleware/proxy could treat the request as a data request and replace the standard Location redirect header with the internal x-nextjs-redirect header. Browsers do not follow x-nextjs-redirect, so the response became an unusable redirect for normal clients. If the application was deployed behind a CDN or reverse proxy that caches 3xx responses without varying on this header, a single attacker request could poison the cached redirect response for the affected path. Subsequent visitors could then receive a cached redirect response without a Location header, causing a denial of service for that redirect path until the cache entry expired or was purged. This vulnerability is fixed in 15.5.16 and 16.2.5.

Next.js is a React framework. Starting with version 12.0.0 and prior to version 12.0.9, vulnerable code could allow a bad actor to trigger a denial of service attack for anyone using i18n functionality. In order to be affected by this CVE, one must use next start or a custom server and the built-in i18n support. Deployments on Vercel, along with similar environments where invalid requests are filtered before reaching Next.js, are not affected. A patch has been released, `next@12.0.9`, that mitigates this issue. As a workaround, one may ensure `/${locale}/_next/` is blocked from reaching the Next.js instance until it becomes feasible to upgrade.

Next.js is a React Framework for the Web. Cersions on the 10.x, 11.x, 12.x, 13.x, and 14.x branches before version 14.2.7 contain a vulnerability in the image optimization feature which allows for a potential Denial of Service (DoS) condition which could lead to excessive CPU consumption. Neither the `next.config.js` file that is configured with `images.unoptimized` set to `true` or `images.loader` set to a non-default value nor the Next.js application that is hosted on Vercel are affected. This issue was fully patched in Next.js `14.2.7`. As a workaround, ensure that the `next.config.js` file has either `images.unoptimized`, `images.loader` or `images.loaderFile` assigned.

A denial of service vulnerability exists in Next.js versions with Partial Prerendering (PPR) enabled when running in minimal mode. The PPR resume endpoint accepts unauthenticated POST requests with the `Next-Resume: 1` header and processes attacker-controlled postponed state data. Two closely related vulnerabilities allow an attacker to crash the server process through memory exhaustion: 1. **Unbounded request body buffering**: The server buffers the entire POST request body into memory using `Buffer.concat()` without enforcing any size limit, allowing arbitrarily large payloads to exhaust available memory. 2. **Unbounded decompression (zipbomb)**: The resume data cache is decompressed using `inflateSync()` without limiting the decompressed output size. A small compressed payload can expand to hundreds of megabytes or gigabytes, causing memory exhaustion. Both attack vectors result in a fatal V8 out-of-memory error (`FATAL ERROR: Reached heap limit Allocation failed - JavaScript heap out of memory`) causing the Node.js process to terminate. The zipbomb variant is particularly dangerous as it can bypass reverse proxy request size limits while still causing large memory allocation on the server. To be affected you must have an application running with `experimental.ppr: true` or `cacheComponents: true` configured along with the NEXT_PRIVATE_MINIMAL_MODE=1 environment variable. Strongly consider upgrading to 15.6.0-canary.61 or 16.1.5 to reduce risk and prevent availability issues in Next applications.

A denial of service vulnerability exists in self-hosted Next.js applications that have `remotePatterns` configured for the Image Optimizer. The image optimization endpoint (`/_next/image`) loads external images entirely into memory without enforcing a maximum size limit, allowing an attacker to cause out-of-memory conditions by requesting optimization of arbitrarily large images. This vulnerability requires that `remotePatterns` is configured to allow image optimization from external domains and that the attacker can serve or control a large image on an allowed domain. Strongly consider upgrading to 15.5.10 or 16.1.5 to reduce risk and prevent availability issues in Next applications.

Next.js is a React framework for building full-stack web applications. From to before 15.5.16 and 16.2.5, applications using Partial Prerendering through the Cache Components feature can be vulnerable to connection exhaustion through crafted POST requests to a server action. In affected configurations, a malicious request can trigger a request-body handling deadlock that leaves connections open for an extended period, consuming file descriptors and server capacity until legitimate users are denied service. This vulnerability is fixed in 15.5.16 and 16.2.5.

Next.js is a React framework for building full-stack web applications. Starting in version 13.0.0 and prior to versions 13.5.8, 14.2.21, and 15.1.2, Next.js is vulnerable to a Denial of Service (DoS) attack that allows attackers to construct requests that leaves requests to Server Actions hanging until the hosting provider cancels the function execution. This vulnerability can also be used as a Denial of Wallet (DoW) attack when deployed in providers billing by response times. (Note: Next.js server is idle during that time and only keeps the connection open. CPU and memory footprint are low during that time.). Deployments without any protection against long running Server Action invocations are especially vulnerable. Hosting providers like Vercel or Netlify set a default maximum duration on function execution to reduce the risk of excessive billing. This is the same issue as if the incoming HTTP request has an invalid `Content-Length` header or never closes. If the host has no other mitigations to those then this vulnerability is novel. This vulnerability affects only Next.js deployments using Server Actions. The issue was resolved in Next.js 13.5.8, 14.2.21, and 15.1.2. We recommend that users upgrade to a safe version. There are no official workarounds.

Next.js is a React framework for building full-stack web applications. Starting in version 16.0.1 and prior to version 16.1.7, a request containing the `next-resume: 1` header (corresponding with a PPR resume request) would buffer request bodies without consistently enforcing `maxPostponedStateSize` in certain setups. The previous mitigation protected minimal-mode deployments, but equivalent non-minimal deployments remained vulnerable to the same unbounded postponed resume-body buffering behavior. In applications using the App Router with Partial Prerendering capability enabled (via `experimental.ppr` or `cacheComponents`), an attacker could send oversized `next-resume` POST payloads that were buffered without consistent size enforcement in non-minimal deployments, causing excessive memory usage and potential denial of service. This is fixed in version 16.1.7 by enforcing size limits across all postponed-body buffering paths and erroring when limits are exceeded. If upgrading is not immediately possible, block requests containing the `next-resume` header, as this is never valid to be sent from an untrusted client.

Cloudflare Quiche (through version 0.19.1/0.20.0) was affected by an unlimited resource allocation vulnerability causing rapid increase of memory usage of the system running quiche server or client. A remote attacker could take advantage of this vulnerability by repeatedly sending an unlimited number of 1-RTT CRYPTO frames after previously completing the QUIC handshake. Exploitation was possible for the duration of the connection which could be extended by the attacker.  quiche 0.19.2 and 0.20.1 are the earliest versions containing the fix for this issue.

OpenTelemetry.Exporter.OneCollector is a .NET exporter that sends telemetry to a OneCollector back-end over HTTP. In versions 1.15.0 and earlier, when a request to the configured back-end or collector results in an unsuccessful HTTP 4xx or 5xx response, the HttpJsonPostTransport class reads the entire response body into memory with no upper bound on the number of bytes consumed in order to include the error response in operator logs. An attacker who controls the configured endpoint, or who can intercept traffic to it via a man-in-the-middle attack, can return an arbitrarily large response body. This causes unbounded heap allocation in the consuming process, leading to high transient memory pressure, garbage-collection stalls, or an OutOfMemoryException that terminates the process. As a workaround, use network-level controls such as firewall rules, mTLS, or a service mesh to prevent man-in-the-middle attacks on the configured back-end or collector endpoint. This issue is fixed in version 1.15.1, which limits the number of bytes read from the response body in an error condition to 4 MiB.

OpenTelemetry.Resources.Azure is the .NET resource detector for Azure environments. In versions 1.15.0-beta.1 and earlier, the AzureVmMetaDataRequestor class makes HTTP requests to the Azure VM instance metadata service and reads the response body into memory without any size limit. An attacker who controls the configured endpoint, or who can intercept traffic to it via a man-in-the-middle attack, can return an arbitrarily large response body. This causes unbounded heap allocation in the consuming process, leading to high transient memory pressure, garbage-collection stalls, or an OutOfMemoryException that terminates the process. As a workaround, disable the Azure VM resource detector or use network-level controls such as firewall rules, mTLS, or a service mesh to prevent man-in-the-middle attacks on the Azure VM instance metadata endpoint. This issue is fixed in version 1.15.1-beta.1, which streams responses rather than buffering them entirely in memory and ignores responses larger than 4 MiB.

OpenTelemetry dotnet is a dotnet telemetry framework. In 1.6.0-rc.1 and earlier, OpenTelemetry.Exporter.Jaeger may allow sustained memory pressure when the internal pooled-list sizing grows based on a large observed span/tag set and that enlarged size is reused for subsequent allocations. Under high-cardinality or attacker-influenced telemetry input, this can increase memory consumption and potentially cause denial of service. There is no plan to fix this issue as OpenTelemetry.Exporter.Jaeger was deprecated in 2023.

The AWS X-Ray Remote Sampler package provides a sampler which can get sampling configurations from AWS X-Ray. Prior to 0.1.0-alpha.8, OpenTelemetry.Sampler.AWS reads unbounded HTTP response bodies from a configured AWS X-Ray remote sampling endpoint into memory. AWSXRaySamplerClient.DoRequestAsync called HttpClient.SendAsync followed by ReadAsStringAsync(), which materializes the entire HTTP response body into a single in-memory string with no size limit. The sampling endpoint is configurable via AWSXRayRemoteSamplerBuilder.SetEndpoint (default: http://localhost:2000). An attacker who controls the configured endpoint, or who can intercept traffic to it (MitM), can return an arbitrarily large response body. This causes unbounded heap allocation in the consuming process, leading to high transient memory pressure, garbage-collection stalls, or an OutOfMemoryException that terminates the process. This vulnerability is fixed in 0.1.0-alpha.8.

Allocation of Resources Without Limits or Throttling vulnerability in Drupal Stage File Proxy allows Flooding.This issue affects Stage File Proxy: from 0.0.0 before 3.1.5.

LTI JupyterHub Authenticator is a JupyterHub authenticator for LTI. Prior to version 1.6.3, the LTI 1.1 validator stores OAuth nonces in a class-level dictionary that grows without bounds. Nonces are added before signature validation, so an attacker with knowledge of a valid consumer key can send repeated requests with unique nonces to gradually exhaust server memory, causing a denial of service. This issue has been patched in version 1.6.3.

DNN (formerly DotNetNuke) is an open-source web content management platform (CMS) in the Microsoft ecosystem. Possible denial of service with specially crafted information in the public registration form. This vulnerability is fixed in 9.13.8.

A flaw was found in Undertow. A remote attacker could exploit this vulnerability by sending an HTTP GET request containing multipart/form-data content. If the underlying application processes parameters using methods like `getParameterMap()`, the server prematurely parses and stores this content to disk. This could lead to resource exhaustion, potentially resulting in a Denial of Service (DoS).

Astro is a web framework. Prior to version 10.0.0, Astro's Server Islands POST handler buffers and parses the full request body as JSON without enforcing a size limit. Because JSON.parse() allocates a V8 heap object for every element in the input, a crafted payload of many small JSON objects achieves ~15x memory amplification (wire bytes to heap bytes), allowing a single unauthenticated request to exhaust the process heap and crash the server. The /_server-islands/[name] route is registered on all Astro SSR apps regardless of whether any component uses server:defer, and the body is parsed before the island name is validated, so any Astro SSR app with the Node standalone adapter is affected. This issue has been patched in version 10.0.0.

Uncontrolled resource consumption in Windows LDAP - Lightweight Directory Access Protocol allows an unauthorized attacker to deny service over a network.

A flaw was found in the OpenSSH package. For each ping packet the SSH server receives, a pong packet is allocated in a memory buffer and stored in a queue of packages. It is only freed when the server/client key exchange has finished. A malicious client may keep sending such packages, leading to an uncontrolled increase in memory consumption on the server side. Consequently, the server may become unavailable, resulting in a denial of service attack.

An issue was discovered in wolfSSL before 5.5.0 (when --enable-session-ticket is used); however, only version 5.3.0 is exploitable. Man-in-the-middle attackers or a malicious server can crash TLS 1.2 clients during a handshake. If an attacker injects a large ticket (more than 256 bytes) into a NewSessionTicket message in a TLS 1.2 handshake, and the client has a non-empty session cache, the session cache frees a pointer that points to unallocated memory, causing the client to crash with a "free(): invalid pointer" message. NOTE: It is likely that this is also exploitable during TLS 1.3 handshakes between a client and a malicious server. With TLS 1.3, it is not possible to exploit this as a man-in-the-middle.

TYPO3 is an open source PHP based web content management system released under the GNU GPL. In affected versions requesting invalid or non-existing resources via HTTP triggers the page error handler which again could retrieve content to be shown as an error message from another page. This leads to a scenario in which the application is calling itself recursively - amplifying the impact of the initial attack until the limits of the web server are exceeded. Users are advised to update to TYPO3 version 11.5.16 to resolve this issue. There are no known workarounds for this issue.

There exists a security vulnerability in Jetty's ThreadLimitHandler.getRemote() which can be exploited by unauthorized users to cause remote denial-of-service (DoS) attack. By repeatedly sending crafted requests, attackers can trigger OutofMemory errors and exhaust the server's memory.

A vulnerability, which was classified as problematic, was found in Axiomatic Bento4 up to 1.6.0-641. Affected is the function AP4_DataBuffer::SetDataSize of the file Mp4Decrypt.cpp of the component mp4decrypt. The manipulation leads to allocation of resources. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used.

Astro is a web framework. In versions 9.0.0 through 9.5.3, Astro server actions have no default request body size limit, which can lead to memory exhaustion DoS. A single large POST to a valid action endpoint can crash the server process on memory-constrained deployments. On-demand rendered sites built with Astro can define server actions, which automatically parse incoming request bodies (JSON or FormData). The body is buffered entirely into memory with no size limit — a single oversized request is sufficient to exhaust the process heap and crash the server. Astro's Node adapter (`mode: 'standalone'`) creates an HTTP server with no body size protection. In containerized environments, the crashed process is automatically restarted, and repeated requests cause a persistent crash-restart loop. Action names are discoverable from HTML form attributes on any public page, so no authentication is required. The vulnerability allows unauthenticated denial of service against SSR standalone deployments using server actions. A single oversized request crashes the server process, and repeated requests cause a persistent crash-restart loop in containerized environments. Version 9.5.4 contains a fix.

Underscore.js is a utility-belt library for JavaScript. Prior to 1.13.8, the _.flatten and _.isEqual functions use recursion without a depth limit. Under very specific conditions, detailed below, an attacker could exploit this in a Denial of Service (DoS) attack by triggering a stack overflow. Untrusted input must be used to create a recursive datastructure, for example using JSON.parse, with no enforced depth limit. The datastructure thus created must be passed to _.flatten or _.isEqual. In the case of _.flatten, the vulnerability can only be exploited if it is possible for a remote client to prepare a datastructure that consists of arrays at all levels AND if no finite depth limit is passed as the second argument to _.flatten. In the case of _.isEqual, the vulnerability can only be exploited if there exists a code path in which two distinct datastructures that were submitted by the same remote client are compared using _.isEqual. For example, if a client submits data that are stored in a database, and the same client can later submit another datastructure that is then compared to the data that were saved in the database previously, OR if a client submits a single request, but its data are parsed twice, creating two non-identical but equivalent datastructures that are then compared. Exceptions originating from the call to _.flatten or _.isEqual, as a result of a stack overflow, are not being caught. This vulnerability is fixed in 1.13.8.

NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. The WebSockets handling of NATS messages handles compressed messages via the WebSockets negotiated compression. Prior to versions 2.11.2 and 2.12.3, the implementation bound the memory size of a NATS message but did not independently bound the memory consumption of the memory stream when constructing a NATS message which might then fail validation for size reasons. An attacker can use a compression bomb to cause excessive memory consumption, often resulting in the operating system terminating the server process. The use of compression is negotiated before authentication, so this does not require valid NATS credentials to exploit. The fix, present in versions 2.11.2 and 2.12.3, was to bounds the decompression to fail once the message was too large, instead of continuing on. The vulnerability only affects deployments which use WebSockets and which expose the network port to untrusted end-points.

This is an uncontrolled resource consumption vulnerability (CWE-400) that can lead to Denial of Service (DoS). In vulnerable Undici versions, when interceptors.deduplicate() is enabled, response data for deduplicated requests could be accumulated in memory for downstream handlers. An attacker-controlled or untrusted upstream endpoint can exploit this with large/chunked responses and concurrent identical requests, causing high memory usage and potential OOM process termination. Impacted users are applications that use Undici’s deduplication interceptor against endpoints that may produce large or long-lived response bodies. PatchesThe issue has been patched by changing deduplication behavior to stream response chunks to downstream handlers as they arrive (instead of full-body accumulation), and by preventing late deduplication when body streaming has already started. Users should upgrade to the first official Undici (and Node.js, where applicable) releases that include this patch.

Traefik is an HTTP reverse proxy and load balancer. Prior to 2.11.35 and 3.6.7, there is a potential vulnerability in Traefik ACME TLS certificates' automatic generation: the ACME TLS-ALPN fast path can allow unauthenticated clients to tie up go routines and file descriptors indefinitely when the ACME TLS challenge is enabled. A malicious client can open many connections, send a minimal ClientHello with acme-tls/1, then stop responding, leading to denial of service of the entry point. The vulnerability is fixed in 2.11.35 and 3.6.7.

Undici is an HTTP/1.1 client for Node.js. Prior to 7.18.0 and 6.23.0, the number of links in the decompression chain is unbounded and the default maxHeaderSize allows a malicious server to insert thousands compression steps leading to high CPU usage and excessive memory allocation. This vulnerability is fixed in 7.18.0 and 6.23.0.

An issue in Assimp v.6.0.2 allows a remote attacker to cause a denial of service via the FBXParser.cpp, ParseVectorDataArray()

Quarkus is a Cloud Native, (Linux) Container First framework for writing Java applications. Prior to versions 3.31.0, 3.27.2, and 3.20.5, a vulnerability exists in the HTTP layer of Quarkus REST related to response handling. When a response is being written, the framework waits for previously written response chunks to be fully transmitted before proceeding. If the client connection is dropped during this waiting period, the associated worker thread is never released and becomes permanently blocked. Under sustained or repeated occurrences, this can exhaust the available worker threads, leading to degraded performance, or complete unavailability of the application. This issue has been patched in versions 3.31.0, 3.27.2, and 3.20.5. A workaround involves implementing a health check that monitors the status and saturation of the worker thread pool to detect abnormal thread retention early.

IBM Watson CP4D Data Stores 4.6.0 does not properly allocate resources without limits or throttling which could allow a remote attacker with information specific to the system to cause a denial of service. IBM X-Force ID: 248924.

Kiwi TCMS, an open source test management system, does not impose rate limits in versions prior to 12.0. This makes it easier to attempt denial-of-service attacks against the Password reset page. An attacker could potentially send a large number of emails if they know the email addresses of users in Kiwi TCMS. Additionally that may strain SMTP resources. Users should upgrade to v12.0 or later to receive a patch. As potential workarounds, users may install and configure a rate-limiting proxy in front of Kiwi TCMS and/or configure rate limits on their email server when possible.

In JetBrains TeamCity before 2024.03.2 server was susceptible to DoS attacks with incorrect auth tokens

The package org.eclipse.milo:sdk-server before 0.6.8 are vulnerable to Denial of Service (DoS) when bypassing the limitations for excessive memory consumption by sending multiple CloseSession requests with the deleteSubscription parameter equal to False.

Unbounded memory allocation in Google Guava 11.0 through 24.x before 24.1.1 allows remote attackers to conduct denial of service attacks against servers that depend on this library and deserialize attacker-provided data, because the AtomicDoubleArray class (when serialized with Java serialization) and the CompoundOrdering class (when serialized with GWT serialization) perform eager allocation without appropriate checks on what a client has sent and whether the data size is reasonable.

If an attacker causes kdcproxy to connect to an attacker-controlled KDC server (e.g. through server-side request forgery), they can exploit the fact that kdcproxy does not enforce bounds on TCP response length to conduct a denial-of-service attack. While receiving the KDC's response, kdcproxy copies the entire buffered stream into a new buffer on each recv() call, even when the transfer is incomplete, causing excessive memory allocation and CPU usage. Additionally, kdcproxy accepts incoming response chunks as long as the received data length is not exactly equal to the length indicated in the response header, even when individual chunks or the total buffer exceed the maximum length of a Kerberos message. This allows an attacker to send unbounded data until the connection timeout is reached (approximately 12 seconds), exhausting server memory or CPU resources. Multiple concurrent requests can cause accept queue overflow, denying service to legitimate clients.

Improper initialization implementation in Portmapper used in B&R Industrial Automation Automation Runtime <G4.93 allows unauthenticated network-based attackers to cause permanent denial-of-service conditions.

JavaScript preprocessing, webhooks and global scripts can cause uncontrolled CPU, memory, and disk I/O utilization. Preprocessing/webhook/global script configuration and testing are only available to Administrative roles (Admin and Superadmin). Administrative privileges should be typically granted to users who need to perform tasks that require more control over the system. The security risk is limited because not all users have this level of access.

IBM MQ 9.2 CD, 9.2 LTS, 9.3 CD, and 9.3 LTS could allow a remote attacker to cause a denial of service due to an error processing invalid data. IBM X-Force ID: 248418.

IBM MQ 9.0 LTS, 9.1 LTS, 9.2 LTS, 9.3 LTS, and 9.3 CD is vulnerable to a denial of service attack caused by an error applying configuration changes. IBM X-Force ID: 290335.

IBM MQ 9.0 LTS, 9.1 LTS, 9.2 LTS, 9.3 LTS and 9.3 CD, in certain configurations, is vulnerable to a denial of service attack caused by an error processing messages when an API Exit using MQBUFMH is used. IBM X-Force ID: 290259.

Cosign provides code signing and transparency for containers and binaries. Prior to version 2.2.4, a remote image with a malicious attachment can cause denial of service of the host machine running Cosign. This can impact other services on the machine that rely on having memory available such as a Redis database which can result in data loss. It can also impact the availability of other services on the machine that will not be available for the duration of the machine denial. The root cause of this issue is that Cosign reads the attachment from a remote image entirely into memory without checking the size of the attachment first. As such, a large attachment can make Cosign read a large attachment into memory; If the attachments size is larger than the machine has memory available, the machine will be denied of service. The Go runtime will make a SigKill after a few seconds of system-wide denial. This issue can allow a supply-chain escalation from a compromised registry to the Cosign user: If an attacher has compromised a registry or the account of an image vendor, they can include a malicious attachment and hurt the image consumer. Version 2.2.4 contains a patch for the vulnerability.

IBM WebSphere Application Server Liberty 18.0.0.2 through 24.0.0.4 is vulnerable to a denial of service, caused by sending a specially crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources. IBM X-Force ID: 284574.

IBM WebSphere Application Server 8.5, 9.0 and IBM WebSphere Application Server Liberty 17.0.0.3 through 24.0.0.4 are vulnerable to a denial of service, caused by sending a specially crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources. IBM X-Force ID: 281516.

Some Dahua software products have a vulnerability of unauthenticated un-throttled ICMP requests on remote DSS Server. After bypassing the firewall access control policy, by sending a specific crafted packet to the vulnerable interface, an attacker could exploit the victim server to launch ICMP request attack to the designated target host.

Parrot Bebop 4.7.1. allows remote attackers to prevent legitimate terminal connections by exhausting the DHCP IP address pool. To accomplish this, the attacker would first need to connect to the device's internal Wi-Fi network (e.g., by guessing the password). Then, the attacker would need to send many DHCP request packets.