A heap-based out-of-bounds read vulnerability in the DNSSEC validation of dnsmasq allows remote attackers to cause a denial of service via a crafted DNS packet.

A flaw was identified in libsoup, a widely used HTTP library in GNOME-based systems. When processing specially crafted HTTP Range headers, the library may improperly validate requested byte ranges. In certain build configurations, this could allow a remote attacker to access portions of server memory beyond the intended response. Exploitation requires a vulnerable configuration and access to a server using the embedded SoupServer component.

A flaw was found in gdk-pixbuf. When parsing a specially crafted ICO file with pixel values that exceed the defined palette range, an out-of-bounds read can occur due to improper bounds checking against the actual palette size. This vulnerability causes heap bytes to be interpreted as valid palette indices and rendered as RGB pixel values in the output image, allowing an attacker to extract heap content via the generated output, such as a thumbnail.

An out-of-bounds read vulnerability exists in dnsmasq's find_soa() function in src/rfc1035.c. When parsing NS section records, extract_name() is called with extrabytes=0, failing to validate that 10 additional bytes exist for fixed-length DNS record fields. A remote attacker controlling a DNS zone can exploit this via a crafted NXDOMAIN response to cause a 10-byte heap out-of-bounds read, potentially accessing stale data from prior transactions.

A flaw was found in Python, specifically in the FTP (File Transfer Protocol) client library in PASV (passive) mode. The issue is how the FTP client trusts the host from the PASV response by default. This flaw allows an attacker to set up a malicious FTP server that can trick FTP clients into connecting back to a given IP address and port. This vulnerability could lead to FTP client scanning ports, which otherwise would not have been possible.

Other issue in the JavaScript Engine component. This vulnerability was fixed in Firefox 150.0.3, Firefox ESR 115.36, Firefox ESR 140.11, and Thunderbird 140.11.

A flaw was found in Keycloak. The Keycloak guides recommend to not expose /admin path to the outside in case the installation is using a proxy. The issue occurs at least via ha-proxy, as it can be tricked to using relative/non-normalized paths to access the /admin application path relative to /realms which is expected to be exposed.

A flaw was found in Event-Driven Automation (EDA) in Ansible Automation Platform (AAP), which lacks encryption of sensitive information. An attacker with network access could exploit this vulnerability by sniffing the plaintext data transmitted between the EDA and AAP. An attacker with system access could exploit this vulnerability by reading the plaintext data stored in EDA and AAP databases.

A vulnerability was found in 3Scale. There is no auth mechanism to see a PDF invoice of a Developer user if the URL is known. Anyone can see the invoice if the URL is known or guessed.

A flaw was found in JBoss Enterprise Application Platform. When role-based authorization is used for Enterprise Java Beans (EJB) access, the system does not correctly call the necessary authorization modules. This prevents Java Authorization Contract for Containers (JACC) permissions from being applied, allowing remote attackers to gain unauthorized access to EJBs.

A flaw was found in OpenShift Console. A Server Side Request Forgery (SSRF) attack can happen if an attacker supplies all or part of a URL to the server to query. The server is considered to be in a privileged network position and can often reach exposed services that aren't readily available to clients due to network filtering. Leveraging such an attack vector, the attacker can have an impact on other services and potentially disclose information or have other nefarious effects on the system. The /api/dev-console/proxy/internet endpoint on the OpenShift Console allows authenticated users to have the console's pod perform arbitrary and fully controlled HTTP(s) requests. The full response to these requests is returned by the endpoint. While the name of this endpoint suggests the requests are only bound to the internet, no such checks are in place. An authenticated user can therefore ask the console to perform arbitrary HTTP requests from outside the cluster to a service inside the cluster.

It was found in OpenShift Container Platform 4 that ignition config, served by the Machine Config Server, can be accessed externally from clusters without authentication. The MCS endpoint (port 22623) provides ignition configuration used for bootstrapping Nodes and can include some sensitive data, e.g. registry pull secrets. There are two scenarios where this data can be accessed. The first is on Baremetal, OpenStack, Ovirt, Vsphere and KubeVirt deployments which do not have a separate internal API endpoint and allow access from outside the cluster to port 22623 from the standard OpenShift API Virtual IP address. The second is on cloud deployments when using unsupported network plugins, which do not create iptables rules that prevent to port 22623. In this scenario, the ignition config is exposed to all pods within the cluster and cannot be accessed externally.

IBM Robotic Process Automation 20.12 through 21.0.6 is vulnerable to exposure of the name and email for the creator/modifier of platform level objects. IBM X-Force ID: 238678.

The RC4 algorithm, as used in the TLS protocol and SSL protocol, does not properly combine state data with key data during the initialization phase, which makes it easier for remote attackers to conduct plaintext-recovery attacks against the initial bytes of a stream by sniffing network traffic that occasionally relies on keys affected by the Invariance Weakness, and then using a brute-force approach involving LSB values, aka the "Bar Mitzvah" issue.

When binding against a DN during authentication, the reply from 389-ds-base will be different whether the DN exists or not. This can be used by an unauthenticated attacker to check the existence of an entry in the LDAP database.

A heap-buffer-overread vulnerability was found in GnuTLS in how it handles the Certificate Transparency (CT) Signed Certificate Timestamp (SCT) extension during X.509 certificate parsing. This flaw allows a malicious user to create a certificate containing a malformed SCT extension (OID 1.3.6.1.4.1.11129.2.4.2) that contains sensitive data. This issue leads to the exposure of confidential information when GnuTLS verifies certificates from certain websites when the certificate (SCT) is not checked correctly.

Controls for zone transfers may not be properly applied to Dynamically Loadable Zones (DLZs) if the zones are writable Versions affected: BIND 9.9.0 -> 9.10.8-P1, 9.11.0 -> 9.11.5-P2, 9.12.0 -> 9.12.3-P2, and versions 9.9.3-S1 -> 9.11.5-S3 of BIND 9 Supported Preview Edition. Versions 9.13.0 -> 9.13.6 of the 9.13 development branch are also affected. Versions prior to BIND 9.9.0 have not been evaluated for vulnerability to CVE-2019-6465.

A flaw was found in RESTEasy client in all versions of RESTEasy up to 4.5.6.Final. It may allow client users to obtain the server's potentially sensitive information when the server got WebApplicationException from the RESTEasy client call. The highest threat from this vulnerability is to data confidentiality.

A path traversal vulnerability was found in Undertow. This issue may allow a remote attacker to append a specially-crafted sequence to an HTTP request for an application deployed to JBoss EAP, which may permit access to privileged or restricted files and directories.

A flaw was found in gnutls. The PKCS#7 padding check, performed during decryption, was not constant-time. This timing side-channel could allow a remote attacker to potentially leak sensitive information about the padding bytes through observable timing differences. This vulnerability is a form of information disclosure.

It has been discovered in redhat-certification that any unauthorized user may download any file under /var/www/rhcert, provided they know its name. Red Hat Certification 6 and 7 is vulnerable to this issue.

Shotwell version 0.22.0 (and possibly other versions) is vulnerable to a TLS/SSL certification validation flaw resulting in a potential for man in the middle attacks.

A flaw was found in Ansible Tower, versions 3.6.x before 3.6.2 and 3.5.x before 3.5.4, when /websocket is requested and the password contains the '#' character. This request would cause a socket error in RabbitMQ when parsing the password and an HTTP error code 500 and partial password disclose will occur in plaintext. An attacker could easily guess some predictable passwords or brute force the password.

A flaw was found in Keycloak. A remote attacker can exploit differential error messages during the identity-first login flow when Organizations are enabled. This vulnerability allows an attacker to determine the existence of users, leading to information disclosure through user enumeration.

A vulnerability was found in Quay, which allows successful authentication even when a truncated password version is provided. This flaw affects the authentication mechanism, reducing the overall security of password enforcement.  While the risk is relatively low due to the typical length of the passwords used (73 characters), this vulnerability can still be exploited to reduce the complexity of brute-force or password-guessing attacks. The truncation of passwords weakens the overall authentication process, thereby reducing the effectiveness of password policies and potentially increasing the risk of unauthorized access in the future.

When using the gdImageCreateFromXbm() function in the GD Graphics Library (aka LibGD) 2.2.5, as used in the PHP GD extension in PHP versions 7.1.x below 7.1.30, 7.2.x below 7.2.19 and 7.3.x below 7.3.6, it is possible to supply data that will cause the function to use the value of uninitialized variable. This may lead to disclosing contents of the stack that has been left there by previous code.

A flaw was found in the OpenShift Mirror Registry. This vulnerability allows an unauthenticated, remote attacker to enumerate valid usernames and email addresses via different error messages during authentication failures and account creation.

Vulnerability in the Java SE, Java SE Embedded, JRockit component of Oracle Java SE (subcomponent: Libraries). Supported versions that are affected are Java SE: 6u171, 7u161, 8u152 and 9.0.1; Java SE Embedded: 8u151; JRockit: R28.3.16. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Java SE, Java SE Embedded, JRockit. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Java SE, Java SE Embedded, JRockit accessible data. Note: This vulnerability applies to client and server deployment of Java. This vulnerability can be exploited through sandboxed Java Web Start applications and sandboxed Java applets. It can also be exploited by supplying data to APIs in the specified Component without using sandboxed Java Web Start applications or sandboxed Java applets, such as through a web service. CVSS 3.0 Base Score 3.7 (Confidentiality impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N).

OpenSSH through 7.7 is prone to a user enumeration vulnerability due to not delaying bailout for an invalid authenticating user until after the packet containing the request has been fully parsed, related to auth2-gss.c, auth2-hostbased.c, and auth2-pubkey.c.

An information leak vulnerability was found in Undertow. If all headers are not written out in the first write() call then the code that handles flushing the buffer will always write out the full contents of the writevBuffer buffer, which may contain data from previous requests.

A flaw was found in Keycloak. A remote attacker can exploit a Cross-Origin Resource Sharing (CORS) header injection vulnerability in Keycloak's User-Managed Access (UMA) token endpoint. This flaw occurs because the `azp` claim from a client-supplied JSON Web Token (JWT) is used to set the `Access-Control-Allow-Origin` header before the JWT signature is validated. When a specially crafted JWT with an attacker-controlled `azp` value is processed, this value is reflected as the CORS origin, even if the grant is later rejected. This can lead to the exposure of low-sensitivity information from authorization server error responses, weakening origin isolation, but only when a target client is misconfigured with `webOrigins: ["*"]`.

A flaw was found in gnutls. A remote attacker could exploit this vulnerability by presenting a specially crafted Online Certificate Status Protocol (OCSP) response during a TLS handshake. Due to a logic error in how gnutls processes multi-record OCSP responses, a client with OCSP verification enabled may incorrectly accept a revoked server certificate, potentially leading to a compromise of trust.

Spring Security (Spring Security 4.1.x before 4.1.5, 4.2.x before 4.2.4, and 5.0.x before 5.0.1; and Spring Framework 4.3.x before 4.3.14 and 5.0.x before 5.0.3) does not consider URL path parameters when processing security constraints. By adding a URL path parameter with special encodings, an attacker may be able to bypass a security constraint. The root cause of this issue is a lack of clarity regarding the handling of path parameters in the Servlet Specification. Some Servlet containers include path parameters in the value returned for getPathInfo() and some do not. Spring Security uses the value returned by getPathInfo() as part of the process of mapping requests to security constraints. In this particular attack, different character encodings used in path parameters allows secured Spring MVC static resource URLs to be bypassed.

The web console login form in ovirt-engine before version 4.2.3 returned different errors for non-existent users and invalid passwords, allowing an attacker to discover the names of valid user accounts.

Traefik is an HTTP reverse proxy and load balancer. Versions 2.11.40 and below, 3.0.0-beta1 through 3.6.11, and 3.7.0-ea.1 are vulnerable to mTLS bypass through the TLS SNI pre-sniffing logic related to fragmented ClientHello packets. When a TLS ClientHello is fragmented across multiple records, Traefik's SNI extraction may fail with an EOF and return an empty SNI. The TCP router then falls back to the default TLS configuration, which does not require client certificates by default. This allows an attacker to bypass route-level mTLS enforcement and access services that should require mutual TLS authentication. This issue is patched in versions 2.11.41, 3.6.11 and 3.7.0-ea.2.

When a SecurityManager is configured, a web application's ability to read system properties should be controlled by the SecurityManager. In Apache Tomcat 9.0.0.M1 to 9.0.0.M9, 8.5.0 to 8.5.4, 8.0.0.RC1 to 8.0.36, 7.0.0 to 7.0.70, 6.0.0 to 6.0.45 the system property replacement feature for configuration files could be used by a malicious web application to bypass the SecurityManager and read system properties that should not be visible.

IBM Robotic Process Automation 21.0.0 through 21.0.7.1 runtime is vulnerable to information disclosure of script content if the remote REST request computer policy is enabled. IBM X-Force ID: 263470.

A flaw was found in RESTEasy in all versions of RESTEasy up to 4.6.0.Final. The endpoint class and method names are returned as part of the exception response when RESTEasy cannot convert one of the request URI path or query values to the matching JAX-RS resource method's parameter value. The highest threat from this vulnerability is to data confidentiality.

IBM Robotic Process Automation for Cloud Pak 21.0.0 through 21.0.7.4 and 23.0.0 through 23.0.5 is vulnerable to disclosing server version information which may be used to determine software vulnerabilities at the operating system level. IBM X-Force ID: 259368.

A flaw was found in Keycloak. This improper input validation vulnerability occurs because Keycloak accepts RFC-compliant matrix parameters in URL path segments, while common reverse proxy configurations may ignore or mishandle them. A remote attacker can craft requests to mask path segments, potentially bypassing proxy-level path filtering. This could expose administrative or sensitive endpoints that operators believe are not externally reachable.

A path disclosure vulnerability was found in Samba. As part of the Spotlight protocol, Samba discloses the server-side absolute path of shares, files, and directories in the results for search queries. This flaw allows a malicious client or an attacker with a targeted RPC request to view the information that is part of the disclosed path.

IBM Resilient SOAR 40 and earlier could disclose sensitive information by allowing a user to enumerate usernames.

A vulnerability has been identified in the Linux kernel's ksmbd component (kernel SMB/CIFS server). A security control designed to prevent dictionary attacks, which introduces a 5-second delay during session setup, can be bypassed through the use of asynchronous requests. This bypass negates the intended anti-brute-force protection, potentially allowing attackers to conduct dictionary attacks more efficiently against user credentials or other authentication mechanisms.

A flaw was found in Keycloak. A remote, unauthenticated attacker can exploit this vulnerability by sending specially crafted SOAP requests to the SAML ECP (Security Assertion Markup Language Enhanced Client or Proxy) endpoint with varying client IDs. By observing distinct faultstrings in the responses, the attacker can determine the client's protocol type, leading to information disclosure.

A flaw was found in 389 Directory Server. The PBKDF2-SHA256 password verification function uses standard memcmp() for comparing password hashes instead of a constant-time comparison function. A remote attacker could potentially use timing measurements of LDAP bind attempts to infer partial hash information, though practical exploitation is extremely difficult due to PBKDF2 computational overhead.

The Birthday attack against 64-bit block ciphers flaw (CVE-2016-2183) was reported for the health checks port (9979) on etcd grpc-proxy component. Even though the CVE-2016-2183 has been fixed in the etcd components, to enable periodic health checks from kubelet, it was necessary to open up a new port (9979) on etcd grpc-proxy, hence this port might be considered as still vulnerable to the same type of vulnerability. The health checks on etcd grpc-proxy do not contain sensitive data (only metrics data), therefore the potential impact related to this vulnerability is minimal. The CVE-2023-0296 has been assigned to this issue to track the permanent fix in the etcd component.

In PostgreSQL, a modified, unauthenticated server can send an unterminated string during the establishment of Kerberos transport encryption. In certain conditions a server can cause a libpq client to over-read and report an error message containing uninitialized bytes.

A vulnerability was found in the netavark package, a network stack for containers used with Podman. Due to dns.podman search domain being removed, netavark may return external servers if a valid A/AAAA record is sent as a response. When creating a container with a given name, this name will be used as the hostname for the container itself, as the podman's search domain is not added anymore the container is using the host's resolv.conf, and the DNS resolver will try to look into the search domains contained on it. If one of the domains contain a name with the same hostname as the running container, the connection will forward to unexpected external servers.

A flaw was found in CIRCL's implementation of the FourQ elliptic curve. This vulnerability allows an attacker to compromise session security via low-order point injection and incorrect point validation during Diffie-Hellman key exchange.