OpenPAM Nummularia 9.2 through 10.0 does not properly handle the error reported when an include directive refers to a policy that does not exist, which causes the loaded policy chain to no be discarded and allows context-dependent attackers to bypass authentication via a login (1) without a password or (2) with an incorrect password.

BIG-IP configurations using Active Directory, LDAP, or Client Certificate LDAP for management authentication with multiple servers are exposed to a vulnerability which allows an authentication bypass. This can result in a complete compromise of the system. This issue only impacts specific engineering hotfixes using the aforementioned authentication configuration. NOTE: This vulnerability does not affect any of the BIG-IP major, minor or maintenance releases you obtained from downloads.f5.com. The affected Engineering Hotfix builds are as follows: Hotfix-BIGIP-14.1.0.3.0.79.6-ENG.iso, Hotfix-BIGIP-14.1.0.3.0.97.6-ENG.iso, Hotfix-BIGIP-14.1.0.3.0.99.6-ENG.iso, Hotfix-BIGIP-14.1.0.5.0.15.5-ENG.iso, Hotfix-BIGIP-14.1.0.5.0.36.5-ENG.iso, Hotfix-BIGIP-14.1.0.5.0.40.5-ENG.iso, Hotfix-BIGIP-14.1.0.6.0.11.9-ENG.iso, Hotfix-BIGIP-14.1.0.6.0.14.9-ENG.iso, Hotfix-BIGIP-14.1.0.6.0.68.9-ENG.iso, Hotfix-BIGIP-14.1.0.6.0.70.9-ENG.iso, Hotfix-BIGIP-14.1.2.0.11.37-ENG.iso, Hotfix-BIGIP-14.1.2.0.18.37-ENG.iso, Hotfix-BIGIP-14.1.2.0.32.37-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.46.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.14.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.16.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.34.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.97.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.99.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.105.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.111.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.115.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.122.4-ENG.iso, Hotfix-BIGIP-15.0.1.0.33.11-ENG.iso, Hotfix-BIGIP-15.0.1.0.48.11-ENG.iso

Authentication bypass vulnerability in Amazing Little Poll affecting versions 1.3 and 1.4. This vulnerability could allow an unauthenticated user to access the admin panel without providing any credentials by simply accessing the "lp_admin.php?adminstep=" parameter.

The Syrus4 IoT gateway utilizes an unsecured MQTT server to download and execute arbitrary commands, allowing a remote unauthenticated attacker to execute code on any Syrus4 device connected to the cloud service. The MQTT server also leaks the location, video and diagnostic data from each connected device. An attacker who knows the IP address of the server is able to connect and perform the following operations: * Get location data of the vehicle the device is connected to * Send CAN bus messages via the ECU module ( https://syrus.digitalcomtech.com/docs/ecu-1 https://syrus.digitalcomtech.com/docs/ecu-1 ) * Immobilize the vehicle via the safe-immobilizer module ( https://syrus.digitalcomtech.com/docs/system-tools#safe-immobilization https://syrus.digitalcomtech.com/docs/system-tools#safe-immobilization ) * Get live video through the connected video camera * Send audio messages to the driver ( https://syrus.digitalcomtech.com/docs/system-tools#apx-tts https://syrus.digitalcomtech.com/docs/system-tools#apx-tts )

A vulnerability was determined in DataLinkDC dinky up to 1.2.5. This affects the function addInterceptors of the file dinky-admin/src/main/java/org/dinky/configure/AppConfig.java of the component OpenAPI Endpoint. Executing a manipulation can lead to missing authentication. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

Unify OpenStage/OpenScape Desk Phone IP SIP before V3 R3.11.0 has an authentication bypass in the default mode of the Workpoint Interface

The vulnerability exists in ADiTaaS (Allied Digital Integrated Tool-as-a-Service) version 5.1 due to an improper authentication vulnerability in the ADiTaaS backend API. An unauthenticated remote attacker could exploit this vulnerability by sending specially crafted HTTP requests to the vulnerable platform. Successful exploitation of this vulnerability could allow the attacker to gain full access to the customers’ data and completely compromise the targeted platform.

Rocket.Chat is an open-source, secure, fully customizable communications platform. Prior to versions 7.10.8, 7.11.5, 7.12.5, 7.13.4, 8.0.2, 8.1.1, and 8.2.0, authentication vulnerabilities exist in Rocket.Chat's enterprise DDP Streamer service. The Account.login method exposed through the DDP Streamer does not enforce Two-Factor Authentication (2FA) or validate user account status (deactivated users can still login), despite these checks being mandatory in the standard Meteor login flow. This issue has been patched in versions 7.10.8, 7.11.5, 7.12.5, 7.13.4, 8.0.2, 8.1.1, and 8.2.0.

Feathersjs is a framework for creating web APIs and real-time applications with TypeScript or JavaScript. From 5.0.0 to before 5.0.42, an unauthenticated attacker can send a crafted GET request directly to /oauth/:provider/callback with a forged profile in the query string. The OAuth service's authentication payload has a fallback chain that reaches params.query (the raw request query) when Grant's session/state responses are empty. Since the attacker never initiated an OAuth authorize flow, Grant has no session to work with and produces no response, so the fallback fires. The forged profile then drives entity lookup and JWT minting. The attacker gets a valid access token for an existing user without ever contacting the OAuth provider. This vulnerability is fixed in 5.0.42.

A vulnerability classified as critical was found in SourceCodester One Church Management System 1.0. Affected by this vulnerability is an unknown functionality of the file /one_church/userregister.php. The manipulation leads to authentication bypass. The attack can be launched remotely.

Online Sports Complex Booking System v1.0 was discovered to allow attackers to take over user accounts via a crafted POST request.

Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior to versions 8.6.10 and 9.5.0-alpha.11, the Google, Apple, and Facebook authentication adapters use JWT verification to validate identity tokens. When the adapter's audience configuration option is not set (clientId for Google/Apple, appIds for Facebook), JWT verification silently skips audience claim validation. This allows an attacker to use a validly signed JWT issued for a different application to authenticate as any user on the target Parse Server. This issue has been patched in versions 8.6.10 and 9.5.0-alpha.11.

A vulnerability was found in SourceCodester Royale Event Management System 1.0. It has been rated as critical. This issue affects some unknown processing of the file /royal_event/userregister.php. The manipulation leads to improper authentication. The attack may be initiated remotely. The identifier VDB-195785 was assigned to this vulnerability.

The Web3 WordPress plugin before 3.0.0 is vulnerable to an authentication bypass due to incorrect authentication checking in the login flow in functions 'handle_auth_request' and 'hadle_login_request'. This makes it possible for non authenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the username.

The "remember me" functionality in login.php in Burden before 1.8.1 allows remote attackers to bypass authentication and gain privileges by setting the burden_user_rememberme cookie to 1.

Under certain ldap conditions, Cacti authentication can be bypassed with certain credential types.

OpenVPN 2.1 until v2.4.12 and v2.5.6 may enable authentication bypass in external authentication plug-ins when more than one of them makes use of deferred authentication replies, which allows an external user to be granted access with only partially correct credentials.

WeGIA is a web manager for charitable institutions. Prior to version 3.6.5, the script in adicionar_tipo_docs_atendido.php does not go through the project's central controller and does not have its own authentication and permission checks. A malicious user could make a request through tools like Postman or the file's URL on the web to access features exclusive to employees. The vulnerability allows external parties to inject unauthorized data in massive quantities into the application server's storage. Version 3.6.5 fixes the issue.

An authentication bypass vulnerability in the CGI program of Zyxel USG/ZyWALL series firmware versions 4.20 through 4.70, USG FLEX series firmware versions 4.50 through 5.20, ATP series firmware versions 4.32 through 5.20, VPN series firmware versions 4.30 through 5.20, and NSG series firmware versions V1.20 through V1.33 Patch 4, which could allow an attacker to bypass the web authentication and obtain administrative access of the device.

A vulnerability in Jira Seraph allows a remote, unauthenticated attacker to bypass authentication by sending a specially crafted HTTP request. This affects Atlassian Jira Server and Data Center versions before 8.13.18, versions 8.14.0 and later before 8.20.6, and versions 8.21.0 and later before 8.22.0. This also affects Atlassian Jira Service Management Server and Data Center versions before 4.13.18, versions 4.14.0 and later before 4.20.6, and versions 4.21.0 and later before 4.22.0.

A vulnerability, which was classified as critical, was found in holdennb CollabCal. Affected is the function handleGet of the file calenderServer.cpp. The manipulation leads to improper authentication. It is possible to launch the attack remotely. The patch is identified as b80f6d1893607c99e5113967592417d0fe310ce6. It is recommended to apply a patch to fix this issue. VDB-217614 is the identifier assigned to this vulnerability.

A vulnerability classified as critical has been found in ColumbiaSoft Document Locator. This affects an unknown part of the file /api/authentication/login of the component WebTools. The manipulation of the argument Server leads to improper authentication. It is possible to initiate the attack remotely. Upgrading to version 7.2 SP4 and 2021.1 is able to address this issue. It is recommended to upgrade the affected component. The identifier VDB-243729 was assigned to this vulnerability.

CA Automic Sysload 5.6.0 through 6.1.2 contains a vulnerability, related to a lack of authentication on the File Server port, that potentially allows remote attackers to execute arbitrary commands.

Dell iDRAC9 versions 5.00.00.00 and later but prior to 5.10.10.00, contain an improper authentication vulnerability. A remote unauthenticated attacker may potentially exploit this vulnerability to gain access to the VNC Console.

OpenEMR is a free and open source electronic health records and medical practice management application. Prior to 8.0.0, an unauthenticated token disclosure vulnerability in the MedEx callback endpoint allows any unauthenticated visitor to obtain the practice's MedEx API tokens, leading to complete third-party service compromise, PHI exfiltration, unauthorized actions on the MedEx platform, and HIPAA violations. The vulnerability exists because the endpoint bypasses authentication ($ignoreAuth = true) and performs a MedEx login whenever $_POST['callback_key'] is provided, returning the full JSON response including sensitive API tokens. This vulnerability is fixed in 8.0.0.

An Authentication Bypass vulnerability exists in Gitea before 1.5.0, which could let a malicious user gain privileges. If captured, the TOTP code for the 2FA can be submitted correctly more than once.

A flaw was found with the JWT token. A self-signed JWT token could be injected into the update manager and bypass the authentication process, thus could escalate privileges. This affects StarWind SAN and NAS build 1578 and StarWind Command Center build 6864.

basic/BasicAuthProvider.java in AuthGuard before 0.9.0 allows authentication via an inactive identifier.

FUXA is a web-based Process Visualization (SCADA/HMI/Dashboard) software. Prior to 1.2.10, an authentication bypass vulnerability in FUXA allows an unauthenticated, remote attacker to gain administrative access via the heartbeat refresh API and execute arbitrary code on the server. This issue has been patched in FUXA version 1.2.10.

A vulnerability has been identified in TIM 1531 IRC (All versions < V1.1). A remote attacker with network access to port 80/tcp or port 443/tcp could perform administrative operations on the device without prior authentication. Successful exploitation could allow to cause a denial-of-service, or read and manipulate data as well as configuration settings of the affected device. At the stage of publishing this security advisory no public exploitation is known. Siemens provides mitigations to resolve it.

In maccms v10, an attacker can log in through /index.php/user/login in the "col" and "openid" parameters to gain privileges.

The impacted products, when configured to use SSO, are affected by an improper authentication vulnerability. This vulnerability allows the application to accept manual entry of any active directory (AD) account provisioned in the application without supplying a password, resulting in access to the application as the supplied AD account, with all associated privileges.

Hikvision DS-2CD7153-E IP Camera has security bypass via hardcoded credentials

An improper authentication vulnerability has been reported to affect QNAP device running Photo Station. If exploited, this vulnerability allows attackers to compromise the security of the system. We have already fixed this vulnerability in the following versions of Photo Station: Photo Station 6.0.20 ( 2022/02/15 ) and later Photo Station 5.7.16 ( 2022/02/11 ) and later Photo Station 5.4.13 ( 2022/02/11 ) and later

Zoho ManageEngine ServiceDesk Plus MSP before 10.5 Build 10534 is vulnerable to unauthenticated remote code execution due to a filter bypass in which authentication is not required.

Missing access control in ForgeRock Access Management 7.1.0 and earlier versions on all platforms allows remote unauthenticated attackers to hijack sessions, including potentially admin-level sessions. This issue affects: ForgeRock Access Management 7.1 versions prior to 7.1.1; 6.5 versions prior to 6.5.4; all previous versions.

Cisco Linksys Routers EA2700, EA3500, E4200, EA4500: A bug can cause an unsafe TCP port to open which leads to unauthenticated access

A vulnerability has been identified in the web-based management interface of AOS-CX switches that could potentially allow an unauthenticated remote actor to circumvent existing authentication controls. In some cases this could enable resetting the admin password.

A vulnerability has been identified in Control Center Server (CCS) (All versions < V1.5.0). The Control Center Server (CCS) contains an authentication bypass vulnerability in its XML-based communication protocol as provided by default on ports 5444/tcp and 5440/tcp. A remote attacker with network access to the CCS server could exploit this vulnerability to read the CCS users database, including the passwords of all users in obfuscated cleartext.

A vulnerability has been identified in SPPA-T3000 Application Server (All versions < Service Pack R8.2 SP2). The AdminService is available without authentication on the Application Server. An attacker can use methods exposed via this interface to receive password hashes of other users and to change user passwords. Please note that an attacker needs to have access to the Application Highway in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.

Remote code execution vulnerability due to insufficient user privilege verification in reverseWall-MDS. Remote attackers can exploit the vulnerability such as stealing account, through remote code execution.

An Authentication Bypass vulnerability exists in NETGEAR Centria WNDR4700 Firmware 1.0.0.34 in http://<router_ip>/apply.cgi?/hdd_usr_setup.htm that when visited by any user, authenticated or not, causes the router to no longer require a password to access the web administration portal.

An issue was discovered in Joomla! 2.5.0 through 3.10.6 & 4.0.0 through 4.1.0. A user row was not bound to a specific authentication mechanism which could under very special circumstances allow an account takeover.

An improper authentication vulnerability has been reported to affect QNAP device running Video Station. If exploited, this vulnerability allows attackers to compromise the security of the system. We have already fixed this vulnerability in the following versions of Video Station: Video Station 5.5.9 and later Video Station 5.3.13 and later Video Station 5.1.8 and later

SharePort Web Access on D-Link DIR-868L REVB through 2.03, DIR-885L REVA through 1.20, and DIR-895L REVA through 1.21 devices allows Authentication Bypass, as demonstrated by a direct request to folder_view.php or category_view.php.

Improper authentication exists in < 12.3.2, < 12.2.6, and < 12.1.12 for GitLab Community Edition (CE) and Enterprise Edition (EE) in the GitLab SAML integration had a validation issue that permitted an attacker to takeover another user's account.

Zoho ManageEngine Access Manager Plus before 4203 allows anyone to view a few data elements (e.g., access control details) and modify a few aspects of the application state.

Improper host authentication vulnerability in wolfSSH version 1.4.20 and earlier clients that allows authentication bypass and leaking of clients credentials.

vtiger CRM 5.4.0 and earlier contain an Authentication Bypass Vulnerability due to improper authentication validation in the validateSession function.

Belkin N900 router (F9K1104v1) contains an Authentication Bypass using "Javascript debugging".