DrayTek Vigor 2960 firmware versions prior to 1.5.1.4 contain an OS command injection vulnerability in the CGI login handler that allows unauthenticated remote attackers to execute arbitrary commands by injecting shell metacharacters into the formpassword parameter. Attackers can exploit unsanitized input passed to the otp_check.sh script to achieve remote code execution with web server privileges. Exploitation requires knowledge of a valid username and that the target account has MOTP authentication enabled.

An unvalidated REST API in the AppFormix Agent of Juniper Networks AppFormix allows an unauthenticated remote attacker to execute commands as root on the host running the AppFormix Agent, when certain preconditions are performed by the attacker, thus granting the attacker full control over the environment. This issue affects: Juniper Networks AppFormix 3 versions prior to 3.1.22, 3.2.14, 3.3.0.

This affects the package Gerapy from 0 and before 0.9.3. The input being passed to Popen, via the project_configure endpoint, isn’t being sanitized.

CVE-2024-45824 IMPACT A remote code vulnerability exists in the affected products. The vulnerability occurs when chained with Path Traversal, Command Injection, and XSS Vulnerabilities and allows for full unauthenticated remote code execution. The link in the mitigations section below contains patches to fix this issue.

A OS Command Injection vulnerability exists in Node.js versions <14.21.1, <16.18.1, <18.12.1, <19.0.1 due to an insufficient IsAllowedHost check that can easily be bypassed because IsIPAddress does not properly check if an IP address is invalid before making DBS requests allowing rebinding attacks.The fix for this issue in https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2022-32212 was incomplete and this new CVE is to complete the fix.

An issue was discovered in the dces crate through 2020-12-09 for Rust. The World type is marked as Send but lacks bounds on its EntityStore and ComponentStore.

An issue was discovered in the cache crate through 2020-11-24 for Rust. There are unconditional implementations of Send and Sync for Cache<K>.

An issue was discovered in the bunch crate through 2020-11-12 for Rust. There are unconditional implementations of Send and Sync for Bunch<T>.

An issue was discovered in the kekbit crate before 0.3.4 for Rust. For ShmWriter<H>, Send is implemented without requiring H: Send.

An issue was discovered in the toolshed crate through 2020-11-15 for Rust. In CopyCell<T>, the Send trait lacks bounds on the contained type.

An issue was discovered in the multiqueue crate through 2020-12-25 for Rust. There are unconditional implementations of Send for InnerSend<RW, T>, InnerRecv<RW, T>, FutInnerSend<RW, T>, and FutInnerRecv<RW, T>.

An issue was discovered in the rcu_cell crate through 2020-11-14 for Rust. There are unconditional implementations of Send and Sync for RcuCell<T>.

An issue was discovered in the syncpool crate before 0.1.6 for Rust. There is an unconditional implementation of Send for Bucket2.

An issue was discovered in the slock crate through 2020-11-17 for Rust. Slock<T> unconditionally implements Send and Sync.

An issue was discovered in the noise_search crate through 2020-12-10 for Rust. There are unconditional implementations of Send and Sync for MvccRwLock.

An issue was discovered in the lever crate before 0.1.1 for Rust. AtomicBox<T> implements the Send and Sync traits for all types T.

Azure CLI is the command-line interface for Microsoft Azure. In versions previous to 2.40.0, Azure CLI contains a vulnerability for potential code injection. Critical scenarios are where a hosting machine runs an Azure CLI command where parameter values have been provided by an external source. The vulnerability is only applicable when the Azure CLI command is run on a Windows machine and with any version of PowerShell and when the parameter value contains the `&` or `|` symbols. If any of these prerequisites are not met, this vulnerability is not applicable. Users should upgrade to version 2.40.0 or greater to receive a a mitigation for the vulnerability.

HGiga MailSherlock does not validate specific parameters properly. Attackers can use the vulnerability to launch Command inject attacks remotely and execute arbitrary commands of the system.

A vulnerability, which was classified as critical, was found in Zarthus IRC Twitter Announcer Bot up to 1.1.0. This affects the function get_tweets of the file lib/twitterbot/plugins/twitter_announcer.rb. The manipulation of the argument tweet leads to command injection. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. Upgrading to version 1.1.1 is able to address this issue. The patch is named 6b1941b7fc2c70e1f40981b43c84a2c20cc12bd3. It is recommended to upgrade the affected component. The associated identifier of this vulnerability is VDB-223383.

An issue was discovered in SmarterTools SmarterMail through 100.0.7537. Meddler-in-the-middle attackers can pipeline commands after a POP3 STLS command, injecting plaintext commands into an encrypted user session.

# Active Storage allowed transformation methods potentially unsafe Active Storage attempts to prevent the use of potentially unsafe image transformation methods and parameters by default. The default allowed list contains three methods allow for the circumvention of the safe defaults which enables potential command injection vulnerabilities in cases where arbitrary user supplied input is accepted as valid transformation methods or parameters. Impact ------ This vulnerability impacts applications that use Active Storage with the image_processing processing gem in addition to mini_magick as the image processor. Vulnerable code will look something similar to this: ``` <%= image_tag blob.variant(params[:t] => params[:v]) %> ``` Where the transformation method or its arguments are untrusted arbitrary input. All users running an affected release should either upgrade or use one of the workarounds immediately. Workarounds ----------- Consuming user supplied input for image transformation methods or their parameters is unsupported behavior and should be considered dangerous. Strict validation of user supplied methods and parameters should be performed as well as having a strong [ImageMagick security policy](https://imagemagick.org/script/security-policy.php) deployed. Credits ------- Thank you [lio346](https://hackerone.com/lio346) for reporting this!

A command injection vulnerability in the IPSec VPN feature of Zyxel ATP series firmware versions from V4.32 through V5.38, USG FLEX series firmware versions from V4.50 through V5.38, USG FLEX 50(W) series firmware versions from V4.16 through V5.38, and USG20(W)-VPN series firmware versions from V4.16 through V5.38 could allow an unauthenticated attacker to execute some OS commands on an affected device by sending a crafted username to the vulnerable device. Note that this attack could be successful only if the device was configured in User-Based-PSK authentication mode and a valid user with a long username exceeding 28 characters exists.

A OS Command Injection vulnerability exists in Node.js versions <14.20.0, <16.20.0, <18.5.0 due to an insufficient IsAllowedHost check that can easily be bypassed because IsIPAddress does not properly check if an IP address is invalid before making DBS requests allowing rebinding attacks.

WWBN AVideo is an open source video platform. In versions up to and including 26.0, the `sanitizeFFmpegCommand()` function in `plugin/API/standAlone/functions.php` is designed to prevent OS command injection in ffmpeg commands by stripping dangerous shell metacharacters (`&&`, `;`, `|`, `` ` ``, `<`, `>`). However, it fails to strip `$()` (bash command substitution syntax). Since the sanitized command is executed inside a double-quoted `sh -c` context in `execAsync()`, an attacker who can craft a valid encrypted payload can achieve arbitrary command execution on the standalone encoder server. Commit 25c8ab90269e3a01fb4cf205b40a373487f022e1 contains a patch.

Trivy Action runs Trivy as GitHub action to scan a Docker container image for vulnerabilities. A command injection vulnerability exists in `aquasecurity/trivy-action` versions 0.31.0 through 0.33.1 due to improper handling of action inputs when exporting environment variables. The action writes `export VAR=<input>` lines to `trivy_envs.txt` based on user-supplied inputs and subsequently sources this file in `entrypoint.sh`. Because input values are written without appropriate shell escaping, attacker-controlled input containing shell metacharacters (e.g., `$(...)`, backticks, or other command substitution syntax) may be evaluated during the sourcing process. This can result in arbitrary command execution within the GitHub Actions runner context. Version 0.34.0 contains a patch for this issue. The vulnerability is exploitable when a consuming workflow passes attacker-controlled data into any action input that is written to `trivy_envs.txt`. Access to user input is required by the malicious actor. Workflows that do not pass attacker-controlled data into `trivy-action` inputs, workflows that upgrade to a patched version that properly escapes shell values or eliminates the `source ./trivy_envs.txt` pattern, and workflows where user input is not accessible are not affected.

An OS Command Injection vulnerability in the PAN-OS GlobalProtect portal allows an unauthenticated network based attacker to execute arbitrary OS commands with root privileges. An attacker requires some knowledge of the firewall to exploit this issue. This issue can not be exploited if GlobalProtect portal feature is not enabled. This issue impacts PAN-OS 9.1 versions earlier than PAN-OS 9.1.3; PAN-OS 8.1 versions earlier than PAN-OS 8.1.15; PAN-OS 9.0 versions earlier than PAN-OS 9.0.9; all versions of PAN-OS 8.0 and PAN-OS 7.1. Prisma Access services are not impacted by this vulnerability.

A command execution issue was found in Apache SpamAssassin prior to 3.4.3. Carefully crafted nefarious Configuration (.cf) files can be configured to run system commands similar to CVE-2018-11805. This issue is less stealthy and attempts to exploit the issue will throw warnings. Thanks to Damian Lukowski at credativ for reporting the issue ethically. With this bug unpatched, exploits can be injected in a number of scenarios though doing so remotely is difficult. In addition to upgrading to SA 3.4.4, we again recommend that users should only use update channels or 3rd party .cf files from trusted places.

A command execution issue was found in Apache SpamAssassin prior to 3.4.3. Carefully crafted nefarious rule configuration (.cf) files can be configured to run system commands similar to CVE-2018-11805. With this bug unpatched, exploits can be injected in a number of scenarios including the same privileges as spamd is run which may be elevated though doing so remotely is difficult. In addition to upgrading to SA 3.4.4, we again recommend that users should only use update channels or 3rd party .cf files from trusted places. If you cannot upgrade, do not use 3rd party rulesets, do not use sa-compile and do not run spamd as an account with elevated privileges.

An os command injection vulnerability exists in the CWMP SelfDefinedTimeZone functionality of Grandstream GXP2135 1.0.9.129, 1.0.11.74 and 1.0.11.79. A specially crafted network packet can lead to arbitrary command execution. An attacker can send a sequence of malicious packets to trigger this vulnerability.

The package simple-git before 3.15.0 are vulnerable to Remote Code Execution (RCE) when enabling the ext transport protocol, which makes it exploitable via clone() method. This vulnerability exists due to an incomplete fix of [CVE-2022-24066](https://security.snyk.io/vuln/SNYK-JS-SIMPLEGIT-2434306).

The package cookiecutter before 2.1.1 are vulnerable to Command Injection via hg argument injection. When calling the cookiecutter function from Python code with the checkout parameter, it is passed to the hg checkout command in a way that additional flags can be set. The additional flags can be used to perform a command injection.

Command Injection in the CPE WAN Management Protocol (CWMP) registration in Amino Communications AK45x series, AK5xx series, AK65x series, Aria6xx series, Aria7/AK7Xx series and Kami7B allows man-in-the-middle attackers to execute arbitrary commands with root level privileges.

Rclone is a command-line program to sync files and directories to and from different cloud storage providers. Starting in version 1.48.0 and prior to version 1.73.5, the RC endpoint `operations/fsinfo` is exposed without `AuthRequired: true` and accepts attacker-controlled `fs` input. Because `rc.GetFs(...)` supports inline backend definitions, an unauthenticated attacker can instantiate an attacker-controlled backend on demand. For the WebDAV backend, `bearer_token_command` is executed during backend initialization, making single-request unauthenticated local command execution possible on reachable RC deployments without global HTTP authentication. Version 1.73.5 patches the issue.

sagredo qmail before 2026.04.07 allows tls_quit remote code execution because of popen in notlshosts_auto in qmail-remote.c.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in openEuler A-Tune-Collector on Linux allows Command Injection. This vulnerability is associated with program files https://gitee.Com/openeuler/A-Tune-Collector/blob/master/atune_collector/plugin/monitor/process/sched.Py. This issue affects A-Tune-Collector: from 1.1.0-3 through 1.3.0.

OpenClaw before 2026.3.13 contains a remote command injection vulnerability in the iMessage attachment staging flow that allows attackers to execute arbitrary commands on configured remote hosts. The vulnerability exists because unsanitized remote attachment paths containing shell metacharacters are passed directly to the SCP remote operand without validation, enabling command execution when remote attachment staging is enabled.

Deno is a JavaScript, TypeScript, and WebAssembly runtime. From 2.7.0 to 2.7.1, A command injection vulnerability exists in Deno's node:child_process polyfill (shell: true mode) that bypasses the fix for CVE-2026-27190. The two-stage argument sanitization in transformDenoShellCommand (ext/node/polyfills/internal/child_process.ts) has a priority bug: when an argument contains a $VAR pattern, it is wrapped in double quotes (L1290) instead of single quotes. Double quotes in POSIX sh do not suppress backtick command substitution, allowing injected commands to execute. An attacker who controls arguments passed to spawnSync or spawn with shell: true can execute arbitrary OS commands, bypassing Deno's permission system. This vulnerability is fixed in 2.7.2.

dynaconf is a configuration management tool for Python. Prior to version 3.2.13, Dynaconf is vulnerable to Server-Side Template Injection (SSTI) due to unsafe template evaluation in the @Jinja resolver. When the jinja2 package is installed, Dynaconf evaluates template expressions embedded in configuration values without a sandboxed environment. This issue has been patched in version 3.2.13.

Command injection vulnerability in automagik-genie 2.5.27 MCP Server allows attackers to execute arbitrary commands via the view_task (aka view) in the readTranscriptFromCommit function in dist/mcp/server.js when a user reads from an external FORGE_BASE_URL.

OpenClaw versions prior to 2026.2.2 fail to properly validate Windows cmd.exe metacharacters in allowlist-gated exec requests (non-default configuration), allowing attackers to bypass command approval restrictions. Remote attackers can craft command strings with shell metacharacters like & or %...% to execute unapproved commands beyond the allowlisted operations.

OpenClaw versions prior to 2026.2.2 contain an exec approvals (must be enabled) allowlist bypass vulnerability that allows attackers to execute arbitrary commands by injecting command substitution syntax. Attackers can bypass the allowlist protection by embedding unescaped $() or backticks inside double-quoted strings to execute unauthorized commands.

simple-git enables running native Git commands from JavaScript. Versions up to and including 3.31.1 allow execution of arbitrary commands through Git option manipulation, bypassing safety checks meant to block dangerous options like -u and --upload-pack. The flaw stems from an incomplete fix for CVE-2022-25860, as Git's flexible option parsing allows numerous character combinations (e.g., -vu, -4u, -nu) to circumvent the regular-expression-based blocklist in the unsafe operations plugin. Due to the virtually infinite number of valid option variants that Git accepts, a complete blocklist-based mitigation may be infeasible without fully emulating Git's option parsing behavior. This issue has been fixed in version 3.32.0.

Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal'), Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in flow computer and remote controller products of ABB ( RMC-100 (Standard), RMC-100-LITE, XIO, XFCG5 , XRCG5 , uFLOG5 , UDC) allows an attacker who successfully exploited this vulnerability could insert and run arbitrary code in an affected system node.

Deno is a JavaScript, TypeScript, and WebAssembly runtime. Before 2.5.6, a prior patch aimed to block spawning Windows batch/shell files by returning an error when a spawned path’s extension matched .bat or .cmd. That check performs a case-sensitive comparison against lowercase literals and therefore can be bypassed when the extension uses alternate casing (for example .BAT, .Bat, etc.). This vulnerability is fixed in 2.5.6.

A vulnerability was found in D-Link DNS-320, DNS-320LW, DNS-325 and DNS-340L up to 20241028. It has been declared as critical. Affected by this vulnerability is the function cgi_user_add of the file /cgi-bin/account_mgr.cgi?cmd=cgi_user_add. The manipulation of the argument name leads to os command injection. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used.

A vulnerability exists in EnOcean SmartServer IoT version 4.60.009 and prior, which would allow remote attackers, in the LON IP-852 management messages, to send specially crafted IP-852 messages resulting in arbitrary OS command execution on the device.

OS command injection vulneravility in the management gui (maintenance utility) of Hitachi Virtual Storage Platform One Block 23, 24, 26 and 28. This issue affects Hitachi Virtual Storage Platform One Block 23/24/26/28: before DKCMAIN A3-04-21-40/00, ESM A3-04-21/00.

A flaw has been found in wong2 mcp-cli 1.13.0. Affected is the function redirectToAuthorization of the file /src/oauth/provider.js of the component oAuth Handler. This manipulation causes os command injection. The attack may be initiated remotely. The attack is considered to have high complexity. The exploitability is told to be difficult. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in Comodo Internet Security Premium 12.3.4.8162. This issue affects some unknown processing of the file cis_update_x64.xml of the component Manifest File Handler. The manipulation of the argument binary/params leads to os command injection. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

clamscan through 1.2.0 is vulnerable to Command Injection. It is possible to inject arbitrary commands as part of the `_is_clamav_binary` function located within `Index.js`. It should be noted that this vulnerability requires a pre-requisite that a folder should be created with the same command that will be chained to execute. This lowers the risk of this issue.