In NETGEAR Nighthawk X10-R9000 prior to 1.0.4.26, an attacker may execute arbitrary system commands as root by sending a specially-crafted MAC address to the "NETGEAR Genie" SOAP endpoint at AdvancedQoS:GetCurrentBandwidthByMAC. Although this requires QoS being enabled, advanced QoS being enabled, and a valid authentication JWT, additional vulnerabilities (CVE-2019-12510) allow an attacker to interact with the entire SOAP API without authentication. Additionally, DNS rebinding techniques may be used to exploit this vulnerability remotely. Exploiting this vulnerability is somewhat involved. The following limitations apply to the payload and must be overcome for successful exploitation: - No more than 17 characters may be used. - At least one colon must be included to prevent mangling. - A single-quote and meta-character must be used to break out of the existing command. - Parent command remnants after the injection point must be dealt with. - The payload must be in all-caps. Despite these limitations, it is still possible to gain access to an interactive root shell via this vulnerability. Since the web server assigns certain HTTP headers to environment variables with all-caps names, it is possible to insert a payload into one such header and reference the subsequent environment variable in the injection point.

The QMP guest_exec command in QEMU 4.0.0 and earlier is prone to OS command injection, which allows the attacker to achieve code execution, denial of service, or information disclosure by sending a crafted QMP command to the listening server. Note: This has been disputed as a non-issue since QEMU's -qmp interface is meant to be used by trusted users. If one is able to access this interface via a tcp socket open to the internet, then it is an insecure configuration issue

In the MMM::Agent::Helpers::Network::send_arp function in MySQL Multi-Master Replication Manager (MMM) mmm_agentd 2.2.1 (for Solaris), a specially crafted MMM protocol message can cause a shell command injection resulting in arbitrary command execution with the privileges of the mmm\_agentd process. An attacker that can initiate a TCP session with mmm\_agentd can trigger this vulnerability.

RE11S v1.11 was discovered to contain a command injection vulnerability via the component /goform/formAccept.

Dell Unity, version(s) 5.4 and prior, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to arbitrary command execution as root. Exploitation may lead to a system take over by an attacker. This vulnerability is considered critical as it can be leveraged to completely compromise the operating system. Dell recommends customers to upgrade at the earliest opportunity.

A vulnerability was detected in Great Developers Certificate Generation System up to 97171bb0e5e22e52eacf4e4fa81773e5f3cffb73. This vulnerability affects unknown code of the file /restructured/csv.php. The manipulation of the argument photo results in os command injection. The attack can be executed remotely. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The code repository of the project has not been active for many years.

ActiveX Control in MyBuilder before 6.2.2019.814 allow an attacker to execute arbitrary command via the ShellOpen method. This can be leveraged for code execution

Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Prior to versions 0.4.24, 0.5.14, and 0.6.4, several Net::IMAP commands accept a raw string argument that is sent to the server without validation or escaping. If this string is derived from user-controlled input, it may contain contain CRLF sequences, which an attacker can use to inject arbitrary IMAP commands. This issue has been patched in versions 0.4.24, 0.5.14, and 0.6.4.

The CGI scripts in HP OpenView Network Node Manager (OV NNM) 7.51 and 7.53 do not properly validate an unspecified parameter, which allows remote attackers to execute arbitrary commands by using a command string for this parameter's value, related to a "command injection vulnerability."

Tenda M3 V1.0.0.12(4856) was discovered to contain a Command Execution vulnerability via the function TendaTelnet.

WWBN AVideo is an open source video platform. In versions 29.0 and below, the `cloneServer.json.php` endpoint in the CloneSite plugin constructs shell commands using user-controlled input (`url` parameter) without proper sanitization. The input is directly concatenated into a `wget` command executed via `exec()`, allowing command injection. An attacker can inject arbitrary shell commands by breaking out of the intended URL context using shell metacharacters (e.g., `;`). This leads to Remote Code Execution (RCE) on the server. Commit 473c609fc2defdea8b937b00e86ce88eba1f15bb contains a fix.

A vulnerability was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. Affected is the function RSS_Get_Update_Status/RSS_Update/RSS_Channel_AutoDownlaod/RSS_Add/RSS_Channel_Item_Downlaod/RSS_History_Item_List/RSS_Item_List of the file /cgi-bin/download_mgr.cgi. The manipulation results in command injection. The attack may be performed from remote. The exploit has been made public and could be used.

PTW-WMS1 firmware version 2.000.012 allows remote attackers to execute arbitrary OS commands via unspecified vectors.

electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. Prior to version 3.3.8, a command injection vulnerability exists in github.com/elcterm/electerm/npm/install.js:150. The runMac() function appends attacker-controlled remote releaseInfo.name directly into an exec("open ...") command without validation. This issue has been patched in version 3.3.8.

dig.php in GScripts.net DNS Tools allows remote attackers to execute arbitrary commands via shell metacharacters in the ns parameter.

Rclone is a command-line program to sync files and directories to and from different cloud storage providers. Starting in version 1.48.0 and prior to version 1.73.5, the RC endpoint `operations/fsinfo` is exposed without `AuthRequired: true` and accepts attacker-controlled `fs` input. Because `rc.GetFs(...)` supports inline backend definitions, an unauthenticated attacker can instantiate an attacker-controlled backend on demand. For the WebDAV backend, `bearer_token_command` is executed during backend initialization, making single-request unauthenticated local command execution possible on reachable RC deployments without global HTTP authentication. Version 1.73.5 patches the issue.

elFinder is an open-source file manager for web, written in JavaScript using jQuery UI. Prior to 2.1.67, elFinder contains a command injection vulnerability in the resize command. The bg (background color) parameter is accepted from user input and passed through image resize/rotate processing. In configurations that use the ImageMagick CLI backend, this value is incorporated into shell command strings without sufficient escaping. An attacker able to invoke the resize command with a crafted bg value may achieve arbitrary command execution as the web server process user. This vulnerability is fixed in 2.1.67.

A flaw has been found in Wavlink WL-WN578W2 221110. Impacted is the function Delete_Mac_list/SetName/GuestWifi of the file /cgi-bin/wireless.cgi of the component POST Request Handler. Executing a manipulation can lead to command injection. It is possible to launch the attack remotely. The exploit has been published and may be used. It is recommended to upgrade the affected component.

A security flaw has been discovered in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. Affected by this vulnerability is the function cgi_tm_set_share of the file /cgi-bin/time_machine.cgi. The manipulation of the argument Name results in command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks.

An issue was discovered in ONAP SDNC before Dublin. By executing sla/upload with a crafted filename parameter, an unauthenticated attacker can execute an arbitrary command. All SDC setups that include admportal are affected.

OS command injection vulnerability exists in network storage servers STEALTHONE D220/D340 provided by Y'S corporation. An attacker who can access the affected product may execute an arbitrary OS command.

mySCADA myPRO does not properly neutralize POST requests sent to a specific port with version information. This vulnerability could be exploited by an attacker to execute arbitrary commands on the affected system.

The affected product is vulnerable to an authenticated OS command injection, which may allow an attacker to inject and execute arbitrary shell commands as the Admin (root) user.

A vulnerability classified as critical has been found in TOTOLINK EX1800T 9.1.0cu.2112_B20220316. This affects the function setDmzCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ip leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in TOTOLINK EX1800T 9.1.0cu.2112_B20220316. It has been rated as critical. Affected by this issue is the function setWiFiExtenderConfig of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument apcliKey/key leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

OS Command Injection in GitHub repository part-db/part-db prior to 0.5.11.

A vulnerability was found in LB-LINK AC1900 Router 1.0.2 and classified as critical. Affected by this issue is the function websGetVar of the file /goform/set_blacklist. The manipulation of the argument mac/enable leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Unsanitized user input in the web interface for Linksys WiFi extender products (RE6400 and RE6300 through 1.2.04.022) allows for remote command execution. An attacker can access system OS configurations and commands that are not intended for use beyond the web UI.

giting version prior to 0.0.8 allows execution of arbritary commands. The first argument "repo" of function "pull()" is executed by the package without any validation.

A vulnerability has been found in Sangfor Operation and Maintenance Management System up to 3.0.8. This vulnerability affects the function uploadCN of the file VersionController.java. The manipulation of the argument filename leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical was found in hzmanyun Education and Training System 3.1.1. Affected by this vulnerability is the function pdf2swf of the file /pdf2swf. The manipulation of the argument file leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical has been found in hzmanyun Education and Training System 2.1.3. This affects the function scorm of the file UploadImageController.java. The manipulation of the argument param leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in LB-LINK AC1900 Router 1.0.2 and classified as critical. Affected by this vulnerability is the function websGetVar of the file /goform/set_cmd. The manipulation of the argument cmd leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in hzmanyun Education and Training System 2.1. It has been rated as critical. Affected by this issue is the function exportPDF of the file /user/exportPDF. The manipulation of the argument id leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A command injection vulnerability exists in MLflow's model serving container initialization code, specifically in the `_install_model_dependencies_to_env()` function. When deploying a model with `env_manager=LOCAL`, MLflow reads dependency specifications from the model artifact's `python_env.yaml` file and directly interpolates them into a shell command without sanitization. This allows an attacker to supply a malicious model artifact and achieve arbitrary command execution on systems that deploy the model. The vulnerability affects versions 3.8.0 and is fixed in version 3.8.2.

A vulnerability was determined in Sangfor Operation and Maintenance Management System up to 3.0.8. Impacted is the function WriterHandle.getCmd of the file /isomp-protocol/protocol/getCmd. This manipulation of the argument sessionPath causes os command injection. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

Anthropic Claude Code CLI and Claude Agent SDK contain an OS command injection vulnerability in authentication helper execution where helper configuration values are executed using shell=true without input validation. Attackers who can influence authentication settings can inject shell metacharacters through parameters like apiKeyHelper, awsAuthRefresh, awsCredentialExport, and gcpAuthRefresh to execute arbitrary commands with the privileges of the user or automation environment, enabling credential theft and environment variable exfiltration.

A vulnerability was detected in TRENDnet TEW-713RE 1.02. The impacted element is an unknown function of the file /goformX/formFSrvX. The manipulation of the argument SZCMD results in os command injection. It is possible to launch the attack remotely. The exploit is now public and may be used. The vendor confirms: "The product in question TEW-731RE for CVE-2025-15471 has been discontinued and end of life since October 23, 2020. We no longer provide support for this product, so we are not able to confirm the vulnerabilities. We will make an announcement on the website product support page and notify customers who registered their products with us." This vulnerability only affects products that are no longer supported by the maintainer.

A weakness has been identified in D-Link DIR-806A 100CNb11. Affected is the function ssdpcgi_main of the component SSDP Request Handler. This manipulation causes command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be exploited. This vulnerability only affects products that are no longer supported by the maintainer.

An unauthenticated attacker can inject OS commands when calling a server API endpoint in NesterSoft WorkTime. The server API call to generate and download the WorkTime client from the WorkTime server is vulnerable in the “guid” parameter. This allows an attacker to execute arbitrary commands on the WorkTime server as NT Authority\SYSTEM with the highest privileges. Attackers are able to access or manipulate sensitive data and take over the whole server.

A command injection vulnerability on AX53 v1 occurs in mscd debug functionality due to insufficient input handling, allowing log redirection to arbitrary files and concatenation of unvalidated file content into shell commands, enabling authenticated attackers to inject and execute arbitrary commands. Successful exploitation may allow execution of malicious commands and ultimately full control of the device.

A vulnerability, which was classified as critical, was found in Tenda AC7 1200M 15.03.06.44. Affected is the function TendaTelnet of the file /goform/telnet. The manipulation of the argument lan_ip leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was determined in Tenda WH450 1.0.0.18. This impacts an unknown function of the file /goform/CheckTools of the component HTTP Request Handler. Executing a manipulation of the argument ipaddress can lead to command injection. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability has been found in ESAFENET DSM 3.1.2 and classified as critical. Affected by this vulnerability is the function examExportPDF of the file /admin/plan/examExportPDF. The manipulation of the argument s leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in Edimax BR-6208AC 1.02/1.03. Affected by this vulnerability is the function formRoute of the file /gogorm/formRoute of the component Web-based Configuration Interface. The manipulation of the argument strIp/strMask/strGateway results in command injection. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. Edimax confirms this issue: "The product mentioned, EDIMAX BR-6208AC V2, has reached its End of Life (EOL) status. It is no longer supported or maintained by Edimax, and it is no longer available for purchase in the market. Consequently, there will be no further firmware updates or patches for this device. We recommend users upgrade to newer models for better security." This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was identified in Sangfor Operation and Maintenance Management System up to 3.0.8. The affected element is the function SessionController of the file /isomp-protocol/protocol/session. Such manipulation of the argument Hostname leads to os command injection. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

"Dokodemo eye Smart HD" SCR02HD Firmware 1.0.3.1000 and earlier allows remote attackers to execute arbitrary OS commands via unspecified vectors.

A vulnerability was identified in Edimax BR-6208AC 1.02/1.03. Affected is the function formStaDrvSetup of the file /goform/formStaDrvSetup of the component Web-based Configuration Interface. The manipulation of the argument rootAPmac leads to command injection. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. Edimax confirms this issue: "The product mentioned, EDIMAX BR-6208AC V2, has reached its End of Life (EOL) status. It is no longer supported or maintained by Edimax, and it is no longer available for purchase in the market. Consequently, there will be no further firmware updates or patches for this device. We recommend users upgrade to newer models for better security." This vulnerability only affects products that are no longer supported by the maintainer.

An OS command injection vulnerability in the /stream-to-vlc Express route in hitarth-gg Zenshin before 2.7.0 allows remote attackers to execute arbitrary commands via the url parameter.

A vulnerability was found in D-Link DI-7400G+ 19.12.25A1. This affects an unknown function of the file /msp_info.htm?flag=cmd. The manipulation of the argument cmd results in command injection. The attack can be launched remotely. The exploit has been made public and could be used.