An OS command injection vulnerability exists in the httpd wlscan_ASP functionality of InHand Networks InRouter302 V3.5.4. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.
A weakness has been identified in D-Link DIR-806A 100CNb11. Affected is the function ssdpcgi_main of the component SSDP Request Handler. This manipulation causes command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be exploited. This vulnerability only affects products that are no longer supported by the maintainer.
Jenkins Pipeline: Groovy Plugin 2648.va9433432b33c and earlier uses the same checkout directories for distinct SCMs when reading the script file (typically Jenkinsfile) for Pipelines, allowing attackers with Item/Configure permission to invoke arbitrary OS commands on the controller through crafted SCM contents.
Silex SD-320AN version 2.01 and prior and GE MobileLink(GEH-SD-320AN) version GEH-1.1 and prior have a system call parameter that is not properly sanitized, which may allow remote code execution.
A weakness has been identified in D-Link DWR-M920 up to 1.1.50. The affected element is the function sub_4155B4 of the file /boafrm/formLtefotaUpgradeFibocom. This manipulation of the argument fota_url causes command injection. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be exploited.
A vulnerability was found in Wavlink WL-WN578W2 221110. The impacted element is an unknown function of the file /cgi-bin/firewall.cgi of the component POST Request Handler. Performing a manipulation of the argument dmz_flag/del_flag results in command injection. It is possible to initiate the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.
A security flaw has been discovered in Tenda F453 1.0.0.3. The affected element is the function FormWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac results in command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks.
A vulnerability was found in LB-LINK AC1900 Router 1.0.2 and classified as critical. Affected by this issue is the function websGetVar of the file /goform/set_blacklist. The manipulation of the argument mac/enable leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A flaw has been found in D-Link DIR-513 1.10. The impacted element is an unknown function of the file /goform/formSysCmd. Executing a manipulation of the argument sysCmd can lead to os command injection. The attack may be launched remotely. The exploit has been published and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R6250 before 1.0.4.36, R6300v2 before 1.0.4.36, R6400 before 1.0.1.50, R6400v2 before 1.0.2.66, R6700v3 before 1.0.2.66, R6700 before 1.0.2.8, R6900 before 1.0.2.8, R7000 before 1.0.9.88, R6900P before 1.3.2.132, R7100LG before 1.0.0.52, R7900 before 1.0.3.10, R8000 before 1.0.4.46, R7900P before 1.4.1.50, R8000P before 1.4.1.50, and RAX80 before 1.0.1.40.
A vulnerability was determined in SGAI Space1 NAS N1211DS up to 1.0.915. Impacted is the function RENAME_FILE/OPERATE_FILE/NGNIX_UPLOAD of the file /cgi-bin/JSONAPI of the component gsaiagent. This manipulation causes command injection. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was determined in TOTOLINK X5000R 9.1.0cu.2089_B20211224. Affected by this issue is the function snprintf of the file /cgi-bin/cstecgi.cgi?action=exportOvpn&type=user. This manipulation of the argument User causes os command injection. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized.
A vulnerability has been found in TykoDev cherry-studio-TykoFork 0.1. This issue affects the function redirectToAuthorization of the file /.well-known/oauth-authorization-server of the component OAuth Server Discovery. Such manipulation of the argument authorizationUrl leads to os command injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used.
Nagios XI 5.5.6 allows remote authenticated attackers to execute arbitrary commands via a crafted HTTP request.
A vulnerability was identified in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. Affected is the function cgi_create_import_users/cgi_user_batch_create/cgi_user_set_quota/cgi_user_del/cgi_user_modify/cgi_group_set_quota/cgi_group_modify/cgi_group_add/cgi_user_add/cgi_get_modify_group_info/cgi_chg_admin_pw of the file /cgi-bin/account_mgr.cgi. The manipulation leads to command injection. It is possible to initiate the attack remotely. The exploit is publicly available and might be used.
A flaw has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This affects an unknown function of the file /cgi-bin/wizard_mgr.cgi. Executing a manipulation can lead to command injection. The attack can be executed remotely. The exploit has been published and may be used.
A vulnerability was determined in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This impacts the function cgi_device/cgi_sms_test/cgi_firmware_upload/cgi_ntp_time of the file /cgi-bin/system_mgr.cgi. Executing a manipulation can lead to command injection. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized.
A security vulnerability has been detected in D-Link DWR-M920, DWR-M921, DIR-822K and DIR-825M 1.1.5. Impacted is the function system of the file /boafrm/formDebugDiagnosticRun. The manipulation of the argument host leads to command injection. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used.
A vulnerability has been found in AvinashBole quip-mcp-server 1.0.0. Affected by this vulnerability is the function setupToolHandlers of the file src/index.ts. Such manipulation leads to command injection. The attack may be performed from remote. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet.
A security flaw has been discovered in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. Affected by this vulnerability is the function cgi_tm_set_share of the file /cgi-bin/time_machine.cgi. The manipulation of the argument Name results in command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks.
A vulnerability was detected in LB-LINK BL-WR9000 2.4.9. This affects the function sub_458754 of the file /goform/set_wifi. The manipulation results in command injection. It is possible to launch the attack remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. The impacted element is the function cgi_refresh_db/FTP_Server_BlockIP_Add/FTP_Server_BlockIP_Del of the file /cgi-bin/app_mgr.cgi. Such manipulation leads to command injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was detected in ADSLR B-QE2W401 250814-r037c. Affected by this issue is the function parameterdel_swifimac of the file /send_order.cgi. Performing manipulation of the argument del_swifimac results in command injection. The attack is possible to be carried out remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This impacts the function cgi_recovery/cgi_backup_now/cgi_set_schedule/cgi_set_rsync_server of the file /cgi-bin/remote_backup.cgi. The manipulation leads to command injection. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used.
IBM DataStage on Cloud Pak for Data 5.1.2 through 5.3.0 could allow an authenticated user to execute arbitrary commands with normal user privileges on the system due to improper validation of user supplied input through the job subroutine component.
IBM DataStage on Cloud Pak for Data 5.1.2 through 5.3.0 could allow an authenticated user to execute arbitrary commands with normal user privileges on the system due to improper validation of user supplied input through the user-defined function component.
A vulnerability was detected in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. Impacted is the function cgi_portforwarding_add/cgi_portforwarding_del/cgi_portforwarding_modify/cgi_portforwarding_add_scan/cgi_dhcpd_lease/cgi_ddns/cgi_ip/cgi_dhcpd of the file /cgi-bin/network_mgr.cgi. The manipulation results in command injection. The attack may be launched remotely. The exploit is now public and may be used.
A flaw has been found in ADSLR NBR1005GPEV2 250814-r037c. This affects the function ap_macfilter_add of the file /send_order.cgi. Executing manipulation of the argument mac can lead to command injection. The attack may be performed from remote. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A flaw has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. The affected element is the function cgi_myfavorite_add/cgi_myfavorite_set/cgi_myfavorite_del/cgi_myfavorite_set_sort_info/cgi_myfavorite_remove_apkg/cgi_myfavorite_compare_apkg/cgi_mycloud_auto_downlaod of the file /cgi-bin/gui_mgr.cgi. This manipulation of the argument f_user causes command injection. Remote exploitation of the attack is possible. The exploit has been published and may be used.
A vulnerability was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This affects the function FMT_rebuild_diskmgr/FMT_create_diskmgr/ScanDisk_run_e2fsck of the file /cgi-bin/dsk_mgr.cgi. Performing a manipulation results in command injection. The attack is possible to be carried out remotely. The exploit has been made public and could be used.
A vulnerability was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. Affected is the function RSS_Get_Update_Status/RSS_Update/RSS_Channel_AutoDownlaod/RSS_Add/RSS_Channel_Item_Downlaod/RSS_History_Item_List/RSS_Item_List of the file /cgi-bin/download_mgr.cgi. The manipulation results in command injection. The attack may be performed from remote. The exploit has been made public and could be used.
A remote arbitrary command execution vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.10.0, 6.9.6 and 6.8.9. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.
In the web ui of the openbuildservice before 2.3.0 a code injection of the project rebuildtimes statistics could be used by authorized attackers to execute shellcode.
A vulnerability classified as critical was found in olajowon Loggrove up to e428fac38cc480f011afcb1d8ce6c2bad378ddd6. Affected by this vulnerability is an unknown functionality of the file /read/?page=1&logfile=eee&match=. The manipulation of the argument path leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This product does not use versioning. This is why information about affected and unaffected releases are unavailable.
A remote arbitrary command execution vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.10.0, 6.9.6 and 6.8.9. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.
MaxKB is an open-source AI assistant for enterprise. In versions 2.7.1 and below, an incomplete sandbox protection mechanism allows an authenticated user with tool execution privileges to escape the LD_PRELOAD-based sandbox. By env command the attacker can clear the environment variables and drop the sandbox.so hook, leading to unrestricted Remote Code Execution (RCE) and network access. MaxKB restricts untrusted Python code execution via the Tool Debug API by injecting sandbox.so through the LD_PRELOAD environment variable. This intercepts sensitive C library functions (like execve, socket, open) to restrict network and file access. However, a patch allowed the /usr/bin/env utility to be executed by the sandboxed user. When an attacker is permitted to create subprocesses, they can execute the env -i python command. The -i flag instructs env to completely clear all environment variables before running the target program. This effectively drops the LD_PRELOAD environment variable. The newly spawned Python process will therefore execute natively without any sandbox hooks, bypassing all network and file system restrictions. This issue has been fixed in version 2.8.0.
A vulnerability was determined in Sangfor Operation and Maintenance Security Management System 3.0. Impacted is an unknown function of the file /fort/portal_login of the component Frontend. This manipulation of the argument loginUrl causes command injection. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. Upgrading to version 3.0.11 and 3.0.12 is recommended to address this issue. It is advisable to upgrade the affected component.
An issue was discovered in phpMyAdmin. A specially crafted database name could be used to run arbitrary PHP commands through the array export feature. All 4.6.x versions (prior to 4.6.4), 4.4.x versions (prior to 4.4.15.8), and 4.0.x versions (prior to 4.0.10.17) are affected.
A command injection vulnerability has been reported to affect QNAP device running Media Streaming add-on. If exploited, this vulnerability allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of Media Streaming add-on: QTS 5.0.0: Media Streaming add-on 500.0.0.3 ( 2021/08/20 ) and later QTS 4.5.4: Media Streaming add-on 500.0.0.3 ( 2021/08/20 ) and later QTS 4.3.6: Media Streaming add-on 430.1.8.12 ( 2021/08/20 ) and later QTS 4.3.3: Media Streaming add-on 430.1.8.12 ( 2021/09/29 ) and later QuTS-Hero 5.0.0: Media Streaming add-on 500.0.0.3 ( 2021/08/20 ) and later
A vulnerability has been found in D-Link DI-7001 MINI 19.09.19A1/24.04.18B1. The affected element is an unknown function of the file /msp_info.htm. Such manipulation of the argument cmd leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
Dell EMC iDRAC7/iDRAC8, versions prior to 2.60.60.60, and iDRAC9 versions prior to 3.21.21.21 contain a command injection vulnerability in the SNMP agent. A remote authenticated malicious iDRAC user with configuration privileges could potentially exploit this vulnerability to execute arbitrary commands on the iDRAC where SNMP alerting is enabled.
A security flaw has been discovered in RyuzakiShinji biome-mcp-server up to 1.0.0. Affected by this issue is some unknown functionality of the file biome-mcp-server.ts. Performing a manipulation results in command injection. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks. The patch is named 335e1727147efeef011f1ff8b05dd751d8a660be. Applying a patch is the recommended action to fix this issue.
A vulnerability was detected in Tenda AC7 15.03.06.44. This vulnerability affects unknown code of the file /goform/AdvSetLanip. The manipulation of the argument lanIp results in command injection. It is possible to launch the attack remotely. The exploit is now public and may be used.
A vulnerability was found in D-Link DIR-823X 250416. The affected element is an unknown function of the file /goform/set_wifi_blacklists. The manipulation of the argument macList results in command injection. The attack may be performed from remote. The exploit has been made public and could be used.
A vulnerability was detected in PhialsBasement nmap-mcp-server up to bee6d23547d57ae02460022f7c78ac0893092e38. Affected by this issue is the function child_process.exec of the file src/index.ts of the component Nmap CLI Command Handler. The manipulation results in command injection. The attack may be performed from remote. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. The patch is identified as 30a6b9e1c7fa6146f51e28d6ab83a2568d9a3488. It is best practice to apply a patch to resolve this issue.
A vulnerability was found in wonderwhy-er DesktopCommanderMCP up to 0.2.13. The impacted element is the function CommandManager of the file src/command-manager.ts. Performing manipulation results in os command injection. It is possible to initiate the attack remotely. The exploit has been made public and could be used.
A security flaw has been discovered in Wavlink NU516U1 M16U1_V240425. Affected is the function sub_4016F0 of the file /cgi-bin/firewall.cgi. The manipulation of the argument del_flag results in command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was determined in D-Link DIR-823X 250416. The impacted element is the function uci_del of the file /goform/delete_prohibiting. This manipulation of the argument delvalue causes command injection. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized.
xrdp is an open source RDP server. Versions through 0.10.5 allow an authenticated remote user to execute arbitrary commands on the server due to unsafe handling of the AlternateShell parameter in xrdp-sesman. When the AllowAlternateShell setting is enabled (which is the default when not explicitly configured), xrdp accepts a client-supplied AlternateShell value and executes it via /bin/sh -c during session initialization. This results in shell-interpreted execution of unsanitized, user-controlled input. This behavior effectively provides a scriptable remote command execution primitive over RDP within the security context of the authenticated user, occurring prior to normal window manager startup. This can bypass expected session initialization flows and operational assumptions that restrict execution to interactive desktop environments. This issue has been fixed in version 0.10.6.
A weakness has been identified in D-Link DIR-823X 250416. Affected by this issue is the function sub_412E7C of the file /goform/set_switch_settings. This manipulation of the argument port causes command injection. The attack may be initiated remotely. The exploit has been made available to the public and could be exploited.