An issue was discovered in Foxit PDF and Editor for Windows and macOS before 13.2 and 2025 before 2025.2. A crafted PDF can use JavaScript to alter annotation content and subsequently clear the file's modification status via JavaScript interfaces. This circumvents digital signature verification by hiding document modifications, allowing an attacker to mislead users about the document's integrity and compromise the trustworthiness of signed PDFs.

Multiple vulnerabilities in Aqara Hub firmware update process in the Camera Hub G3 4.1.9_0027, Hub M2 4.3.6_0027, and Hub M3 4.3.6_0025 devices, allow attackers to install malicious firmware without proper verification. The device fails to validate firmware signatures during updates, uses outdated cryptographic methods that can be exploited to forge valid signatures, and exposes information through improperly initialized memory.

Acrobat Reader versions 24.001.30264, 20.005.30793, 25.001.20982, 24.001.30273, 20.005.30803 and earlier are affected by an Improper Verification of Cryptographic Signature vulnerability that could result in a Security feature bypass. An attacker could leverage this vulnerability to gain limited unauthorized write access. Exploitation of this issue requires user interaction with a cryptographic signature.

Acrobat Reader versions 24.001.30264, 20.005.30793, 25.001.20982, 24.001.30273, 20.005.30803 and earlier are affected by an Improper Verification of Cryptographic Signature vulnerability that could result in a Security feature bypass. An attacker could leverage this vulnerability to bypass cryptographic protections and gain limited unauthorized write access. Exploitation of this issue requires user interaction with a cryptographic signature.

A improper verification of cryptographic signature vulnerability in Fortinet FortiOS 7.6.0 through 7.6.3, FortiOS 7.4.0 through 7.4.8, FortiOS 7.2.0 through 7.2.11, FortiOS 7.0.0 through 7.0.17, FortiProxy 7.6.0 through 7.6.3, FortiProxy 7.4.0 through 7.4.10, FortiProxy 7.2.0 through 7.2.14, FortiProxy 7.0.0 through 7.0.21, FortiSwitchManager 7.2.0 through 7.2.6, FortiSwitchManager 7.0.0 through 7.0.5 allows an unauthenticated attacker to bypass the FortiCloud SSO login authentication via a crafted SAML response message.

An improper verification of cryptographic signature vulnerability in Fortinet FortiWeb 8.0.0, FortiWeb 7.6.0 through 7.6.4, FortiWeb 7.4.0 through 7.4.9 may allow an unauthenticated attacker to bypass the FortiCloud SSO login authentication via a crafted SAML response message.

Improper verification of cryptographic signatures in the patch management component of Ivanti Endpoint Manager prior to version 2024 SU4 SR1 allows a remote unauthenticated attacker to execute arbitrary code. User Interaction is required.

The ruby-saml library implements the client side of an SAML authorization. Versions up to and including 1.12.4, are vulnerable to authentication bypass through the libxml2 canonicalization process used by Nokogiri for document transformation, which allows an attacker to execute a Signature Wrapping attack. When libxml2’s canonicalization is invoked on an invalid XML input, it may return an empty string rather than a canonicalized node. ruby-saml then proceeds to compute the DigestValue over this empty string, treating it as if canonicalization succeeded. This issue is fixed in version 1.18.0.

The ruby-saml library is for implementing the client side of a SAML authorization. ruby-saml versions up to and including 1.12.4 contain an authentication bypass vulnerability due to an incomplete fix for CVE-2025-25292. ReXML and Nokogiri parse XML differently, generating entirely different document structures from the same input. This allows an attacker to execute a Signature Wrapping attack. This issue is fixed in version 1.18.0.

auth0/node-jws is a JSON Web Signature implementation for Node.js. In versions 3.2.2 and earlier and version 4.0.0, auth0/node-jws has an improper signature verification vulnerability when using the HS256 algorithm under specific conditions. Applications are affected when they use the jws.createVerify() function for HMAC algorithms and use user-provided data from the JSON Web Signature protected header or payload in HMAC secret lookup routines, which can allow attackers to bypass signature verification. This issue has been patched in versions 3.2.3 and 4.0.1.

XML-Sig versions 0.27 through 0.67 for Perl incorrectly validates XML files if signatures are omitted. An attacker can remove the signature from the XML document to make it pass the verification check. XML-Sig is a Perl module to validate signatures on XML files.  An unsigned XML file should return an error message.  The affected versions return true when attempting to validate an XML file that contains no signatures.

GoSign Desktop versions 2.4.0 and earlier use an unsigned update manifest for distributing application updates. The manifest contains package URLs and SHA-256 hashes but is not digitally signed, so its authenticity relies solely on the underlying TLS channel. In affected versions, TLS certificate validation can be disabled when a proxy is configured, allowing an attacker who can intercept network traffic to supply a malicious update manifest and corresponding package with a matching hash. This can cause the client to download and install a tampered update, resulting in arbitrary code execution with the privileges of the GoSign Desktop user on Windows and macOS, or with elevated privileges on some Linux deployments. A local attacker who can modify proxy settings may also abuse this behavior to escalate privileges by forcing installation of a crafted update.

Improper verification of cryptographic signature in the installer for Zoom Workplace VDI Client for Windows may allow an authenticated user to conduct an escalation of privilege via local access.

Evervault is a payment security solution. A vulnerability was identified in the `evervault-go` SDK’s attestation verification logic in versions of `evervault-go` prior to 1.3.2 that may allow incomplete documents to pass validation. This may cause the client to trust an enclave operator that does not meet expected integrity guarantees. The exploitability of this issue is limited in Evervault-hosted environments as an attacker would require the pre-requisite ability to serve requests from specific evervault domain names, following from our ACME challenge based TLS certificate acquisition pipeline. The vulnerability primarily affects applications which only check PCR8. Though the efficacy is also reduced for applications that check all PCR values, the impact is largely remediated by checking PCR 0, 1 and 2. The identified issue has been addressed in version 1.3.2 by validating attestation documents before storing in the cache, and replacing the naive equality checks with a new SatisfiedBy check. Those who useevervault-go to attest Enclaves that are hosted outside of Evervault environments and cannot upgrade have two possible workarounds available. Modify the application logic to fail verification if PCR8 is not explicitly present and non-empty and/or add custom pre-validation to reject documents that omit any required PCRs.

In JetBrains ReSharper before 2025.2.4 missing signature verification in DPA Collector allows local privilege escalation

Improper authentication in the API authentication middleware of HCL DevOps Loop allows authentication tokens to be accepted without proper validation of their expiration and cryptographic signature. As a result, an attacker could potentially use expired or tampered tokens to gain unauthorized access to sensitive resources and perform actions with elevated privileges.

A downgrade issue affecting Intel-based Mac computers was addressed with additional code-signing restrictions. This issue is fixed in macOS Sequoia 15.7.2, macOS Tahoe 26.1. An app may be able to access user-sensitive data.

A downgrade issue affecting Intel-based Mac computers was addressed with additional code-signing restrictions. This issue is fixed in macOS Sequoia 15.7.2, macOS Sonoma 14.8.2, macOS Tahoe 26.1. An app may be able to access sensitive user data.

Cryptographic validation of upgrade images could be circumventing by dropping a specifically crafted file into the upgrade ISO

Constellation is the first Confidential Kubernetes. The Constellation CVM image uses LUKS2-encrypted volumes for persistent storage. When opening an encrypted storage device, the CVM uses the libcryptsetup function crypt_activate_by_passhrase. If the VM is successful in opening the partition with the disk encryption key, it treats the volume as confidential. However, due to the unsafe handling of null keyslot algorithms in the cryptsetup 2.8.1, it is possible that the opened volume is not encrypted at all. Cryptsetup prior to version 2.8.1 does not report an error when processing LUKS2-formatted disks that use the cipher_null-ecb algorithm in the keyslot encryption field. This vulnerability is fixed in 2.24.0.

A weakness has been identified in D-Link DAP-2695 2.00RC13. The affected element is the function sub_40C6B8 of the component Firmware Update Handler. Executing manipulation can lead to improper verification of cryptographic signature. The attack can be launched remotely. Attacks of this nature are highly complex. The exploitability is described as difficult. The exploit has been made available to the public and could be exploited. This vulnerability only affects products that are no longer supported by the maintainer.

Deck Mate 1 executes firmware directly from an external EEPROM without verifying authenticity or integrity. An attacker with physical access can replace or reflash the EEPROM to run arbitrary code that persists across reboots. Because this design predates modern secure-boot or signed-update mechanisms, affected systems should be physically protected or retired from service. The vendor has not indicated that firmware updates are available for this legacy model.

Deck Mate 2's firmware update mechanism accepts packages without cryptographic signature verification, encrypts them with a single hard-coded AES key shared across devices, and uses a truncated HMAC for integrity validation. Attackers with access to the update interface - typically via the unit's USB update port - can craft or modify firmware packages to execute arbitrary code as root, allowing persistent compromise of the device's integrity and deck randomization process. Physical or on-premises access remains the most likely attack path, though network-exposed or telemetry-enabled deployments could theoretically allow remote exploitation if misconfigured. The vendor confirmed that firmware updates have been issued to correct these update-chain weaknesses and that USB update access has been disabled on affected units.

This issue affects Apache Spark versions before 3.4.4, 3.5.2 and 4.0.0. Apache Spark versions before 4.0.0, 3.5.2 and 3.4.4 use an insecure default network encryption cipher for RPC communication between nodes. When spark.network.crypto.enabled is set to true (it is set to false by default), but spark.network.crypto.cipher is not explicitly configured, Spark defaults to AES in CTR mode (AES/CTR/NoPadding), which provides encryption without authentication. This vulnerability allows a man-in-the-middle attacker to modify encrypted RPC traffic undetected by flipping bits in ciphertext, potentially compromising heartbeat messages or application data and affecting the integrity of Spark workflows. To mitigate this issue, users should either configure spark.network.crypto.cipher to AES/GCM/NoPadding to enable authenticated encryption or enable SSL encryption by setting spark.ssl.enabled to true, which provides stronger transport security.

Improper verification of cryptographic signature in Github: Playwright allows an unauthorized attacker to perform spoofing over an adjacent network.

An Improper Verification of Cryptographic Signature vulnerability [CWE-347] in FortiClient MacOS installer version 7.4.2 and below, version 7.2.9 and below, 7.0 all versions may allow a local user to escalate their privileges via FortiClient related executables.

The OAuth Single Sign On – SSO (OAuth Client) plugin for WordPress is vulnerable to Improper Verification of Cryptographic Signature in versions up to, and including, 6.26.12. This is due to the plugin performing unsafe JWT token processing without verification or validation in the `get_resource_owner_from_id_token` function. This makes it possible for unauthenticated attackers to bypass authentication and gain access to any existing user account - including administrators in certain configurations - or to create arbitrary subscriber-level accounts.

Formbricks is an open source qualtrics alternative. Prior to version 4.0.1, Formbricks is missing JWT signature verification. This vulnerability stems from a token validation routine that only decodes JWTs (jwt.decode) without verifying their signatures. Both the email verification token login path and the password reset server action use the same validator, which does not check the token’s signature, expiration, issuer, or audience. If an attacker learns the victim’s actual user.id, they can craft an arbitrary JWT with an alg: "none" header and use it to authenticate and reset the victim’s password. This issue has been patched in version 4.0.1.

MicroWorld eScan AV's update mechanism failed to ensure authenticity and integrity of updates: update packages were delivered and accepted without robust cryptographic verification. As a result, an on-path attacker could perform a man-in-the-middle (MitM) attack and substitute malicious update payloads for legitimate ones. The eScan AV client accepted these substituted packages and executed or loaded their components (including sideloaded DLLs and Java/installer payloads), enabling remote code execution on affected systems. MicroWorld eScan confirmed remediation of the update mechanism on 2023-07-31 but versioning details are unavailable. NOTE: MicroWorld eScan disputes the characterization in third-party reports, stating the issue relates to 2018–2019 and that controls were implemented then.

There is a vulnerability in the Supermicro BMC firmware validation logic at Supermicro MBD-X12STW . An attacker can update the system firmware with a specially crafted image.

There is a vulnerability in the Supermicro BMC firmware validation logic at Supermicro MBD-X13SEM-F . An attacker can update the system firmware with a specially crafted image.

Linkr is a lightweight file delivery system that downloads files from a webserver. Linkr versions through 2.0.0 do not verify the integrity or authenticity of .linkr manifest files before using their contents, allowing a tampered manifest to inject arbitrary file entries into a package distribution. An attacker can modify a generated .linkr manifest (for example by adding a new entry with a malicious URL) and when a user runs the extract command the client downloads the attacker-supplied file without verification. This enables arbitrary file injection and creates a potential path to remote code execution if a downloaded malicious binary or script is later executed. Version 2.0.1 adds a manifest integrity check that compares the checksum of the original author-created manifest to the one being extracted and aborts on mismatch, warning if no original manifest is hosted. Users should update to 2.0.1 or later. As a workaround prior to updating, use only trusted .linkr manifests, manually verify manifest integrity, and host manifests on trusted servers.

A vulnerability in the installation process of Cisco IOS XR Software could allow an authenticated, local attacker to bypass Cisco IOS XR Software image signature verification and load unsigned software on an affected device. To exploit this vulnerability, the attacker must have root-system privileges on the affected device. This vulnerability is due to incomplete validation of files during the installation of an .iso file. An attacker could exploit this vulnerability by modifying contents of the .iso image and then installing and activating it on the device. A successful exploit could allow the attacker to load an unsigned file as part of the image activation process.

E3 Site Supervisor Control (firmware version < 2.31F01) firmware upgrade packages are unsigned. An attacker can forge malicious firmware upgrade packages. An attacker with admin access to the application services can install a malicious firmware upgrade.

An insufficiently secured internal function allows session generation for arbitrary users. The decodeParam function checks the JWT but does not verify which signing algorithm was used. As a result, an attacker can use the "ex:action" parameter in the VerifyUserByThrustedService function to generate a session for any user.

gnark is a zero-knowledge proof system framework. In versions prior to 0.14.0, the Verify function in eddsa.go and ecdsa.go used the S value from a signature without asserting that 0 ≤ S < order, leading to a signature malleability vulnerability. Because gnark’s native EdDSA and ECDSA circuits lack essential constraints, multiple distinct witnesses can satisfy the same public inputs. In protocols where nullifiers or anti-replay checks are derived from R and S, this enables signature malleability and may allow double spending. This issue has been addressed in version 0.14.0.

Improper verification of cryptographic signature in Windows Certificates allows an unauthorized attacker to perform spoofing over a network.

A potential vulnerability was reported in the Lenovo 510 FHD and Performance FHD web cameras that could allow an attacker with physical access to write arbitrary firmware updates to the device over a USB connection.

A vulnerability has been identified in Mendix SAML (Mendix 10.12 compatible) (All versions < V4.0.3), Mendix SAML (Mendix 10.21 compatible) (All versions < V4.1.2), Mendix SAML (Mendix 9.24 compatible) (All versions < V3.6.21). Affected versions of the module insufficiently enforce signature validation and binding checks. This could allow unauthenticated remote attackers to hijack an account in specific SSO configurations.

An improper verification of cryptographic signature in Zscaler's SAML authentication mechanism on the server-side allowed an authentication abuse.

It was discovered that uscan, a tool to scan/watch upstream sources for new releases of software, included in devscripts (a collection of scripts to make the life of a Debian Package maintainer easier), skips OpenPGP verification if the upstream source is already downloaded from a previous run even if the verification failed back then.

A downgrade issue was addressed with additional code-signing restrictions. This issue is fixed in macOS Sequoia 15.6. An app may be able to access protected user data.

A SAML library not dependent on any frameworks that runs in Node. In version 5.0.1, Node-SAML loads the assertion from the (unsigned) original response document. This is different than the parts that are verified when checking signature. This allows an attacker to modify authentication details within a valid SAML assertion. For example, in one attack it is possible to remove any character from the SAML assertion username. To conduct the attack an attacker would need a validly signed document from the identity provider (IdP). This is fixed in version 5.1.0.

A potential security vulnerability has been identified in the HP Linux Imaging and Printing Software documentation. This potential vulnerability is due to the use of a weak code signing key, Digital Signature Algorithm (DSA).

Improper verification of intent by broadcast receiver in System UI for Galaxy Watch prior to SMR Jul-2025 Release 1 allows local attackers to power off the device.

A vulnerability has been identified in TIA Administrator (All versions < V3.0.6). The affected application improperly validates code signing certificates. This could allow an attacker to bypass the check and exceute arbitrary code during installations.

tiny-secp256k1 is a tiny secp256k1 native/JS wrapper. Prior to version 1.1.7, a malicious JSON-stringifyable message can be made passing on verify(), when global Buffer is the buffer package. This affects only environments where require('buffer') is the NPM buffer package. Buffer.isBuffer check can be bypassed, resulting in strange objects being accepted as a message, and those messages could trick verify() into returning false-positive true values. This issue has been patched in version 1.1.7.

Improper signature verification in AMD CPU ROM microcode patch loader may allow an attacker with local administrator privilege to load malicious microcode, potentially resulting in loss of integrity of x86 instruction execution, loss of confidentiality and integrity of data in x86 CPU privileged context and compromise of SMM execution environment.

Quest KACE Systems Management Appliance (SMA) 13.0.x before 13.0.385, 13.1.x before 13.1.81, 13.2.x before 13.2.183, 14.0.x before 14.0.341 (Patch 5), and 14.1.x before 14.1.101 (Patch 4) allows unauthenticated users to upload backup files to the system. While signature validation is implemented, weaknesses in the validation process can be exploited to upload malicious backup content that could compromise system integrity.

rfc3161-client is a Python library implementing the Time-Stamp Protocol (TSP) described in RFC 3161. Prior to version 1.0.3, there is a flaw in the timestamp response signature verification logic. In particular, chain verification is performed against the TSR's embedded certificates up to the trusted root(s), but fails to verify the TSR's own signature against the timestamping leaf certificates. Consequently, vulnerable versions perform insufficient signature validation to properly consider a TSR verified, as the attacker can introduce any TSR signature so long as the embedded leaf chains up to some root TSA. This issue has been patched in version 1.0.3. There is no workaround for this issue.

Improper verification of cryptographic signature in App Control for Business (WDAC) allows an unauthorized attacker to bypass a security feature locally.