https://www.debian.org/ https://en.wikipedia.org/wiki/Debian https://www.debian.org/legal/ https://www.spi-inc.org/projects/debian/
An issue was discovered in Xen 4.6 through 4.14.x. When acting upon a guest XS_RESET_WATCHES request, not all tracking information is freed. A guest can cause unbounded memory usage in oxenstored. This can lead to a system-wide DoS. Only systems using the Ocaml Xenstored implementation are vulnerable. Systems using the C Xenstored implementation are not vulnerable.
An issue was discovered in Xen through 4.14.x. When a Xenstore watch fires, the xenstore client that registered the watch will receive a Xenstore message containing the path of the modified Xenstore entry that triggered the watch, and the tag that was specified when registering the watch. Any communication with xenstored is done via Xenstore messages, consisting of a message header and the payload. The payload length is limited to 4096 bytes. Any request to xenstored resulting in a response with a payload longer than 4096 bytes will result in an error. When registering a watch, the payload length limit applies to the combined length of the watched path and the specified tag. Because watches for a specific path are also triggered for all nodes below that path, the payload of a watch event message can be longer than the payload needed to register the watch. A malicious guest that registers a watch using a very large tag (i.e., with a registration operation payload length close to the 4096 byte limit) can cause the generation of watch events with a payload length larger than 4096 bytes, by writing to Xenstore entries below the watched path. This will result in an error condition in xenstored. This error can result in a NULL pointer dereference, leading to a crash of xenstored. A malicious guest administrator can cause xenstored to crash, leading to a denial of service. Following a xenstored crash, domains may continue to run, but management operations will be impossible. Only C xenstored is affected, oxenstored is not affected.
An issue was discovered in Xen through 4.14.x. Xenstored and guests communicate via a shared memory page using a specific protocol. When a guest violates this protocol, xenstored will drop the connection to that guest. Unfortunately, this is done by just removing the guest from xenstored's internal management, resulting in the same actions as if the guest had been destroyed, including sending an @releaseDomain event. @releaseDomain events do not say that the guest has been removed. All watchers of this event must look at the states of all guests to find the guest that has been removed. When an @releaseDomain is generated due to a domain xenstored protocol violation, because the guest is still running, the watchers will not react. Later, when the guest is actually destroyed, xenstored will no longer have it stored in its internal data base, so no further @releaseDomain event will be sent. This can lead to a zombie domain; memory mappings of that guest's memory will not be removed, due to the missing event. This zombie domain will be cleaned up only after another domain is destroyed, as that will trigger another @releaseDomain event. If the device model of the guest that violated the Xenstore protocol is running in a stub-domain, a use-after-free case could happen in xenstored, after having removed the guest from its internal data base, possibly resulting in a crash of xenstored. A malicious guest can block resources of the host for a period after its own death. Guests with a stub domain device model can eventually crash xenstored, resulting in a more serious denial of service (the prevention of any further domain management operations). Only the C variant of Xenstore is affected; the Ocaml variant is not affected. Only HVM guests with a stubdom device model can cause a serious DoS.
An issue was discovered in Xen through 4.14.x. A guest may access xenstore paths via absolute paths containing a full pathname, or via a relative path, which implicitly includes /local/domain/$DOMID for their own domain id. Management tools must access paths in guests' namespaces, necessarily using absolute paths. oxenstored imposes a pathname limit that is applied solely to the relative or absolute path specified by the client. Therefore, a guest can create paths in its own namespace which are too long for management tools to access. Depending on the toolstack in use, a malicious guest administrator might cause some management tools and debugging operations to fail. For example, a guest administrator can cause "xenstore-ls -r" to fail. However, a guest administrator cannot prevent the host administrator from tearing down the domain. All systems using oxenstored are vulnerable. Building and using oxenstored is the default in the upstream Xen distribution, if the Ocaml compiler is available. Systems using C xenstored are not vulnerable.
An issue was discovered in Xen through 4.14.x. Neither xenstore implementation does any permission checks when reporting a xenstore watch event. A guest administrator can watch the root xenstored node, which will cause notifications for every created, modified, and deleted key. A guest administrator can also use the special watches, which will cause a notification every time a domain is created and destroyed. Data may include: number, type, and domids of other VMs; existence and domids of driver domains; numbers of virtual interfaces, block devices, vcpus; existence of virtual framebuffers and their backend style (e.g., existence of VNC service); Xen VM UUIDs for other domains; timing information about domain creation and device setup; and some hints at the backend provisioning of VMs and their devices. The watch events do not contain values stored in xenstore, only key names. A guest administrator can observe non-sensitive domain and device lifecycle events relating to other guests. This information allows some insight into overall system configuration (including the number and general nature of other guests), and configuration of other guests (including the number and general nature of other guests' devices). This information might be commercially interesting or might make other attacks easier. There is not believed to be exposure of sensitive data. Specifically, there is no exposure of VNC passwords, port numbers, pathnames in host and guest filesystems, cryptographic keys, or within-guest data.
An issue was discovered in Xen through 4.14.x. In the Ocaml xenstored implementation, the internal representation of the tree has special cases for the root node, because this node has no parent. Unfortunately, permissions were not checked for certain operations on the root node. Unprivileged guests can get and modify permissions, list, and delete the root node. (Deleting the whole xenstore tree is a host-wide denial of service.) Achieving xenstore write access is also possible. All systems using oxenstored are vulnerable. Building and using oxenstored is the default in the upstream Xen distribution, if the Ocaml compiler is available. Systems using C xenstored are not vulnerable.
An issue was discovered in Xen through 4.14.x. A bounds check common to most operation time functions specific to FIFO event channels depends on the CPU observing consistent state. While the producer side uses appropriately ordered writes, the consumer side isn't protected against re-ordered reads, and may hence end up de-referencing a NULL pointer. Malicious or buggy guest kernels can mount a Denial of Service (DoS) attack affecting the entire system. Only Arm systems may be vulnerable. Whether a system is vulnerable depends on the specific CPU. x86 systems are not vulnerable.
An issue was discovered in Xen through 4.14.x. Recording of the per-vCPU control block mapping maintained by Xen and that of pointers into the control block is reversed. The consumer assumes, seeing the former initialized, that the latter are also ready for use. Malicious or buggy guest kernels can mount a Denial of Service (DoS) attack affecting the entire system.
An issue was discovered in the Linux kernel through 5.10.1, as used with Xen through 4.14.x. The Linux kernel PV block backend expects the kernel thread handler to reset ring->xenblkd to NULL when stopped. However, the handler may not have time to run if the frontend quickly toggles between the states connect and disconnect. As a consequence, the block backend may re-use a pointer after it was freed. A misbehaving guest can trigger a dom0 crash by continuously connecting / disconnecting a block frontend. Privilege escalation and information leaks cannot be ruled out. This only affects systems with a Linux blkback.
An issue was discovered in Xen through 4.14.x. Some OSes (such as Linux, FreeBSD, and NetBSD) are processing watch events using a single thread. If the events are received faster than the thread is able to handle, they will get queued. As the queue is unbounded, a guest may be able to trigger an OOM in the backend. All systems with a FreeBSD, Linux, or NetBSD (any version) dom0 are vulnerable.
An issue was discovered in Xen through 4.14.x. When they require assistance from the device model, x86 HVM guests must be temporarily de-scheduled. The device model will signal Xen when it has completed its operation, via an event channel, so that the relevant vCPU is rescheduled. If the device model were to signal Xen without having actually completed the operation, the de-schedule / re-schedule cycle would repeat. If, in addition, Xen is resignalled very quickly, the re-schedule may occur before the de-schedule was fully complete, triggering a shortcut. This potentially repeating process uses ordinary recursive function calls, and thus could result in a stack overflow. A malicious or buggy stubdomain serving a HVM guest can cause Xen to crash, resulting in a Denial of Service (DoS) to the entire host. Only x86 systems are affected. Arm systems are not affected. Only x86 stubdomains serving HVM guests can exploit the vulnerability.
In FLAC__bitreader_read_rice_signed_block of bitreader.c, there is a possible out of bounds read due to a heap buffer overflow. This could lead to remote information disclosure with no additional execution privileges needed. User interaction is needed for exploitation.Product: AndroidVersions: Android-11Android ID: A-156076070
curl 7.20.0 through 7.70.0 is vulnerable to improper restriction of names for files and other resources that can lead too overwriting a local file when the -J flag is used.
curl 7.62.0 through 7.70.0 is vulnerable to an information disclosure vulnerability that can lead to a partial password being leaked over the network and to the DNS server(s).
curl 7.41.0 through 7.73.0 is vulnerable to an improper check for certificate revocation due to insufficient verification of the OCSP response.
Due to use of a dangling pointer, libcurl 7.29.0 through 7.71.1 can use the wrong connection when sending data.
curl 7.21.0 to and including 7.73.0 is vulnerable to uncontrolled recursion due to a stack overflow issue in FTP wildcard match parsing.
A malicious server can use the FTP PASV response to trick curl 7.73.0 and earlier into connecting back to a given IP address and port, and this way potentially make curl extract information about services that are otherwise private and not disclosed, for example doing port scanning and service banner extractions.
In AWStats through 7.8, cgi-bin/awstats.pl?config= accepts a partial absolute pathname (omitting the initial /etc), even though it was intended to only read a file in the /etc/awstats/awstats.conf format. NOTE: this issue exists because of an incomplete fix for CVE-2017-1000501 and CVE-2020-29600.
Memory leak in Kafka protocol dissector in Wireshark 3.4.0 and 3.2.0 to 3.2.8 allows denial of service via packet injection or crafted capture file.
Crash in USB HID protocol dissector and possibly other dissectors in Wireshark 3.4.0 and 3.2.0 to 3.2.8 allows denial of service via packet injection or crafted capture file.
A use-after-free flaw was found in kernel/trace/ring_buffer.c in Linux kernel (before 5.10-rc1). There was a race problem in trace_open and resize of cpu buffer running parallely on different cpus, may cause a denial of service problem (DOS). This flaw could even allow a local attacker with special user privilege to a kernel information leak threat.
This affects the package ini before 1.3.6. If an attacker submits a malicious INI file to an application that parses it with ini.parse, they will pollute the prototype on the application. This can be exploited further depending on the context.
Sympa before 6.2.59b.2 allows remote attackers to obtain full SOAP API access by sending any arbitrary string (except one from an expired cookie) as the cookie value to authenticateAndRun.
Various memory and file descriptor leaks were found in apt-python files python/arfile.cc, python/tag.cc, python/tarfile.cc, aka GHSL-2020-170. This issue affects: python-apt 1.1.0~beta1 versions prior to 1.1.0~beta1ubuntu0.16.04.10; 1.6.5ubuntu0 versions prior to 1.6.5ubuntu0.4; 2.0.0ubuntu0 versions prior to 2.0.0ubuntu0.20.04.2; 2.1.3ubuntu1 versions prior to 2.1.3ubuntu1.1;
APT had several integer overflows and underflows while parsing .deb packages, aka GHSL-2020-168 GHSL-2020-169, in files apt-pkg/contrib/extracttar.cc, apt-pkg/deb/debfile.cc, and apt-pkg/contrib/arfile.cc. This issue affects: apt 1.2.32ubuntu0 versions prior to 1.2.32ubuntu0.2; 1.6.12ubuntu0 versions prior to 1.6.12ubuntu0.2; 2.0.2ubuntu0 versions prior to 2.0.2ubuntu0.2; 2.1.10ubuntu0 versions prior to 2.1.10ubuntu0.1;
A locking inconsistency issue was discovered in the tty subsystem of the Linux kernel through 5.9.13. drivers/tty/tty_io.c and drivers/tty/tty_jobctrl.c may allow a read-after-free attack against TIOCGSID, aka CID-c8bcd9c5be24.
A locking issue was discovered in the tty subsystem of the Linux kernel through 5.9.13. drivers/tty/tty_jobctrl.c allows a use-after-free attack against TIOCSPGRP, aka CID-54ffccbf053b.
A Null Pointer Deference issue exists in Academy Software Foundation OpenEXR 2.3.0 in generatePreview in makePreview.cpp that can cause a denial of service via a crafted EXR file.
A heap-based buffer overflow vulnerability exists in Academy Software Foundation OpenEXR 2.3.0 in chunkOffsetReconstruction in ImfMultiPartInputFile.cpp that can cause a denial of service via a crafted EXR file.
A head-based buffer overflow exists in Academy Software Foundation OpenEXR 2.3.0 in writeTileData in ImfTiledOutputFile.cpp that can cause a denial of service via a crafted EXR file.
A flaw was found in the memory management API of QEMU during the initialization of a memory region cache. This issue could lead to an out-of-bounds write access to the MSI-X table while performing MMIO operations. A guest user may abuse this flaw to crash the QEMU process on the host, resulting in a denial of service. This flaw affects QEMU versions prior to 5.2.0.
A use after free issue was addressed with improved memory management. This issue is fixed in macOS Big Sur 11.0.1, watchOS 7.1, iOS 14.2 and iPadOS 14.2, iCloud for Windows 11.5, Safari 14.0.1, tvOS 14.2, iTunes 12.11 for Windows. Processing maliciously crafted web content may lead to arbitrary code execution.
The X.509 GeneralName type is a generic type for representing different types of names. One of those name types is known as EDIPartyName. OpenSSL provides a function GENERAL_NAME_cmp which compares different instances of a GENERAL_NAME to see if they are equal or not. This function behaves incorrectly when both GENERAL_NAMEs contain an EDIPARTYNAME. A NULL pointer dereference and a crash may occur leading to a possible denial of service attack. OpenSSL itself uses the GENERAL_NAME_cmp function for two purposes: 1) Comparing CRL distribution point names between an available CRL and a CRL distribution point embedded in an X509 certificate 2) When verifying that a timestamp response token signer matches the timestamp authority name (exposed via the API functions TS_RESP_verify_response and TS_RESP_verify_token) If an attacker can control both items being compared then that attacker could trigger a crash. For example if the attacker can trick a client or server into checking a malicious certificate against a malicious CRL then this may occur. Note that some applications automatically download CRLs based on a URL embedded in a certificate. This checking happens prior to the signatures on the certificate and CRL being verified. OpenSSL's s_server, s_client and verify tools have support for the "-crl_download" option which implements automatic CRL downloading and this attack has been demonstrated to work against those tools. Note that an unrelated bug means that affected versions of OpenSSL cannot parse or construct correct encodings of EDIPARTYNAME. However it is possible to construct a malformed EDIPARTYNAME that OpenSSL's parser will accept and hence trigger this attack. All OpenSSL 1.1.1 and 1.0.2 versions are affected by this issue. Other OpenSSL releases are out of support and have not been checked. Fixed in OpenSSL 1.1.1i (Affected 1.1.1-1.1.1h). Fixed in OpenSSL 1.0.2x (Affected 1.0.2-1.0.2w).
A flaw was found in the check_chunk_name() function of pngcheck-2.4.0. An attacker able to pass a malicious file to be processed by pngcheck could cause a temporary denial of service, posing a low risk to application availability.
There are 4 places in HistogramCompare() in MagickCore/histogram.c where an integer overflow is possible during simple math calculations. This occurs in the rgb values and `count` value for a color. The patch uses casts to `ssize_t` type for these calculations, instead of `int`. This flaw could impact application reliability in the event that ImageMagick processes a crafted input file. This flaw affects ImageMagick versions prior to 7.0.9-0.
The PALM image coder at coders/palm.c makes an improper call to AcquireQuantumMemory() in routine WritePALMImage() because it needs to be offset by 256. This can cause a out-of-bounds read later on in the routine. The patch adds 256 to bytes_per_row in the call to AcquireQuantumMemory(). This could cause impact to reliability. This flaw affects ImageMagick versions prior to 7.0.8-68.
In the CropImage() and CropImageToTiles() routines of MagickCore/transform.c, rounding calculations performed on unconstrained pixel offsets was causing undefined behavior in the form of integer overflow and out-of-range values as reported by UndefinedBehaviorSanitizer. Such issues could cause a negative impact to application availability or other problems related to undefined behavior, in cases where ImageMagick processes untrusted input data. The upstream patch introduces functionality to constrain the pixel offsets and prevent these issues. This flaw affects ImageMagick versions prior to 7.0.9-0.
WriteOnePNGImage() from coders/png.c (the PNG coder) has a for loop with an improper exit condition that can allow an out-of-bounds READ via heap-buffer-overflow. This occurs because it is possible for the colormap to have less than 256 valid values but the loop condition will loop 256 times, attempting to pass invalid colormap data to the event logger. The patch replaces the hardcoded 256 value with a call to MagickMin() to ensure the proper value is used. This could impact application availability when a specially crafted input file is processed by ImageMagick. This flaw affects ImageMagick versions prior to 7.0.8-68.
In CatromWeights(), MeshInterpolate(), InterpolatePixelChannel(), InterpolatePixelChannels(), and InterpolatePixelInfo(), which are all functions in /MagickCore/pixel.c, there were multiple unconstrained pixel offset calculations which were being used with the floor() function. These calculations produced undefined behavior in the form of out-of-range and integer overflows, as identified by UndefinedBehaviorSanitizer. These instances of undefined behavior could be triggered by an attacker who is able to supply a crafted input file to be processed by ImageMagick. These issues could impact application availability or potentially cause other problems related to undefined behavior. This flaw affects ImageMagick versions prior to 7.0.9-0.
A flaw was found in ImageMagick in MagickCore/colorspace-private.h and MagickCore/quantum.h. An attacker who submits a crafted file that is processed by ImageMagick could trigger undefined behavior in the form of values outside the range of type `unsigned char` and math division by zero. This would most likely lead to an impact to application availability, but could potentially cause other problems related to undefined behavior. This flaw affects ImageMagick versions prior to 7.0.8-68.
A floating point math calculation in ScaleAnyToQuantum() of /MagickCore/quantum-private.h could lead to undefined behavior in the form of a value outside the range of type unsigned long long. The flaw could be triggered by a crafted input file under certain conditions when it is processed by ImageMagick. Red Hat Product Security marked this as Low because although it could potentially lead to an impact to application availability, no specific impact was shown in this case. This flaw affects ImageMagick versions prior to 7.0.8-68.
A flaw was found in ImageMagick in coders/txt.c. An attacker who submits a crafted file that is processed by ImageMagick could trigger undefined behavior in the form of values outside the range of type `unsigned long long`. This would most likely lead to an impact to application availability, but could potentially cause other problems related to undefined behavior. This flaw affects ImageMagick versions prior to 7.0.8-68.
A flaw was found in ImageMagick in MagickCore/quantum-export.c. An attacker who submits a crafted file that is processed by ImageMagick could trigger undefined behavior in the form of values outside the range of type `unsigned long long` as well as a shift exponent that is too large for 64-bit type. This would most likely lead to an impact to application availability, but could potentially cause other problems related to undefined behavior. This flaw affects ImageMagick versions prior to 7.0.9-0.
In IntensityCompare() of /magick/quantize.c, there are calls to PixelPacketIntensity() which could return overflowed values to the caller when ImageMagick processes a crafted input file. To mitigate this, the patch introduces and uses the ConstrainPixelIntensity() function, which forces the pixel intensities to be within the proper bounds in the event of an overflow. This flaw affects ImageMagick versions prior to 6.9.10-69 and 7.0.8-69.
NLnet Labs Unbound, up to and including version 1.12.0, and NLnet Labs NSD, up to and including version 4.3.3, contain a local vulnerability that would allow for a local symlink attack. When writing the PID file, Unbound and NSD create the file if it is not there, or open an existing file for writing. In case the file was already present, they would follow symlinks if the file happened to be a symlink instead of a regular file. An additional chown of the file would then take place after it was written, making the user Unbound/NSD is supposed to run as the new owner of the file. If an attacker has local access to the user Unbound/NSD runs as, she could create a symlink in place of the PID file pointing to a file that she would like to erase. If then Unbound/NSD is killed and the PID file is not cleared, upon restarting with root privileges, Unbound/NSD will rewrite any file pointed at by the symlink. This is a local vulnerability that could create a Denial of Service of the system Unbound/NSD is running on. It requires an attacker having access to the limited permission user Unbound/NSD runs as and point through the symlink to a critical file on the system.
In AWStats through 7.7, cgi-bin/awstats.pl?config= accepts an absolute pathname, even though it was intended to only read a file in the /etc/awstats/awstats.conf format. NOTE: this issue exists because of an incomplete fix for CVE-2017-1000501.
ImageMagick before 6.9.11-40 and 7.x before 7.0.10-40 mishandles the -authenticate option, which allows setting a password for password-protected PDF files. The user-controlled password was not properly escaped/sanitized and it was therefore possible to inject additional shell commands via coders/pdf.c.
An issue was discovered in OpenStack Horizon before 15.3.2, 16.x before 16.2.1, 17.x and 18.x before 18.3.3, 18.4.x, and 18.5.x. There is a lack of validation of the "next" parameter, which would allow someone to supply a malicious URL in Horizon that can cause an automatic redirect to the provided malicious URL.
hw/net/e1000e_core.c in QEMU 5.0.0 has an infinite loop via an RX descriptor with a NULL buffer address.
A flaw was found in ImageMagick in MagickCore/statistic.c. An attacker who submits a crafted file that is processed by ImageMagick could trigger undefined behavior in the form of a too large shift for 64-bit type `ssize_t`. This would most likely lead to an impact to application availability, but could potentially cause other problems related to undefined behavior. This flaw affects ImageMagick versions prior to 7.0.9-0.