In the Linux kernel, the following vulnerability has been resolved: ext4: init quota for 'old.inode' in 'ext4_rename' Syzbot found the following issue: ext4_parse_param: s_want_extra_isize=128 ext4_inode_info_init: s_want_extra_isize=32 ext4_rename: old.inode=ffff88823869a2c8 old.dir=ffff888238699828 new.inode=ffff88823869d7e8 new.dir=ffff888238699828 __ext4_mark_inode_dirty: inode=ffff888238699828 ea_isize=32 want_ea_size=128 __ext4_mark_inode_dirty: inode=ffff88823869a2c8 ea_isize=32 want_ea_size=128 ext4_xattr_block_set: inode=ffff88823869a2c8 ------------[ cut here ]------------ WARNING: CPU: 13 PID: 2234 at fs/ext4/xattr.c:2070 ext4_xattr_block_set.cold+0x22/0x980 Modules linked in: RIP: 0010:ext4_xattr_block_set.cold+0x22/0x980 RSP: 0018:ffff888227d3f3b0 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff88823007a000 RCX: 0000000000000000 RDX: 0000000000000a03 RSI: 0000000000000040 RDI: ffff888230078178 RBP: 0000000000000000 R08: 000000000000002c R09: ffffed1075c7df8e R10: ffff8883ae3efc6b R11: ffffed1075c7df8d R12: 0000000000000000 R13: ffff88823869a2c8 R14: ffff8881012e0460 R15: dffffc0000000000 FS: 00007f350ac1f740(0000) GS:ffff8883ae200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f350a6ed6a0 CR3: 0000000237456000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? ext4_xattr_set_entry+0x3b7/0x2320 ? ext4_xattr_block_set+0x0/0x2020 ? ext4_xattr_set_entry+0x0/0x2320 ? ext4_xattr_check_entries+0x77/0x310 ? ext4_xattr_ibody_set+0x23b/0x340 ext4_xattr_move_to_block+0x594/0x720 ext4_expand_extra_isize_ea+0x59a/0x10f0 __ext4_expand_extra_isize+0x278/0x3f0 __ext4_mark_inode_dirty.cold+0x347/0x410 ext4_rename+0xed3/0x174f vfs_rename+0x13a7/0x2510 do_renameat2+0x55d/0x920 __x64_sys_rename+0x7d/0xb0 do_syscall_64+0x3b/0xa0 entry_SYSCALL_64_after_hwframe+0x72/0xdc As 'ext4_rename' will modify 'old.inode' ctime and mark inode dirty, which may trigger expand 'extra_isize' and allocate block. If inode didn't init quota will lead to warning. To solve above issue, init 'old.inode' firstly in 'ext4_rename'.

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix null-ptr-deref in ext4_write_info I caught a null-ptr-deref bug as follows: ================================================================== KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f] CPU: 1 PID: 1589 Comm: umount Not tainted 5.10.0-02219-dirty #339 RIP: 0010:ext4_write_info+0x53/0x1b0 [...] Call Trace: dquot_writeback_dquots+0x341/0x9a0 ext4_sync_fs+0x19e/0x800 __sync_filesystem+0x83/0x100 sync_filesystem+0x89/0xf0 generic_shutdown_super+0x79/0x3e0 kill_block_super+0xa1/0x110 deactivate_locked_super+0xac/0x130 deactivate_super+0xb6/0xd0 cleanup_mnt+0x289/0x400 __cleanup_mnt+0x16/0x20 task_work_run+0x11c/0x1c0 exit_to_user_mode_prepare+0x203/0x210 syscall_exit_to_user_mode+0x5b/0x3a0 do_syscall_64+0x59/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ================================================================== Above issue may happen as follows: ------------------------------------- exit_to_user_mode_prepare task_work_run __cleanup_mnt cleanup_mnt deactivate_super deactivate_locked_super kill_block_super generic_shutdown_super shrink_dcache_for_umount dentry = sb->s_root sb->s_root = NULL <--- Here set NULL sync_filesystem __sync_filesystem sb->s_op->sync_fs > ext4_sync_fs dquot_writeback_dquots sb->dq_op->write_info > ext4_write_info ext4_journal_start(d_inode(sb->s_root), EXT4_HT_QUOTA, 2) d_inode(sb->s_root) s_root->d_inode <--- Null pointer dereference To solve this problem, we use ext4_journal_start_sb directly to avoid s_root being used.

In the Linux kernel, the following vulnerability has been resolved: rapidio: fix possible name leaks when rio_add_device() fails Patch series "rapidio: fix three possible memory leaks". This patchset fixes three name leaks in error handling. - patch #1 fixes two name leaks while rio_add_device() fails. - patch #2 fixes a name leak while rio_register_mport() fails. This patch (of 2): If rio_add_device() returns error, the name allocated by dev_set_name() need be freed. It should use put_device() to give up the reference in the error path, so that the name can be freed in kobject_cleanup(), and the 'rdev' can be freed in rio_release_dev().

In the Linux kernel, the following vulnerability has been resolved: floppy: Fix memory leak in do_floppy_init() A memory leak was reported when floppy_alloc_disk() failed in do_floppy_init(). unreferenced object 0xffff888115ed25a0 (size 8): comm "modprobe", pid 727, jiffies 4295051278 (age 25.529s) hex dump (first 8 bytes): 00 ac 67 5b 81 88 ff ff ..g[.... backtrace: [<000000007f457abb>] __kmalloc_node+0x4c/0xc0 [<00000000a87bfa9e>] blk_mq_realloc_tag_set_tags.part.0+0x6f/0x180 [<000000006f02e8b1>] blk_mq_alloc_tag_set+0x573/0x1130 [<0000000066007fd7>] 0xffffffffc06b8b08 [<0000000081f5ac40>] do_one_initcall+0xd0/0x4f0 [<00000000e26d04ee>] do_init_module+0x1a4/0x680 [<000000001bb22407>] load_module+0x6249/0x7110 [<00000000ad31ac4d>] __do_sys_finit_module+0x140/0x200 [<000000007bddca46>] do_syscall_64+0x35/0x80 [<00000000b5afec39>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 unreferenced object 0xffff88810fc30540 (size 32): comm "modprobe", pid 727, jiffies 4295051278 (age 25.529s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000007f457abb>] __kmalloc_node+0x4c/0xc0 [<000000006b91eab4>] blk_mq_alloc_tag_set+0x393/0x1130 [<0000000066007fd7>] 0xffffffffc06b8b08 [<0000000081f5ac40>] do_one_initcall+0xd0/0x4f0 [<00000000e26d04ee>] do_init_module+0x1a4/0x680 [<000000001bb22407>] load_module+0x6249/0x7110 [<00000000ad31ac4d>] __do_sys_finit_module+0x140/0x200 [<000000007bddca46>] do_syscall_64+0x35/0x80 [<00000000b5afec39>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 If the floppy_alloc_disk() failed, disks of current drive will not be set, thus the lastest allocated set->tag cannot be freed in the error handling path. A simple call graph shown as below: floppy_module_init() floppy_init() do_floppy_init() for (drive = 0; drive < N_DRIVE; drive++) blk_mq_alloc_tag_set() blk_mq_alloc_tag_set_tags() blk_mq_realloc_tag_set_tags() # set->tag allocated floppy_alloc_disk() blk_mq_alloc_disk() # error occurred, disks failed to allocated ->out_put_disk: for (drive = 0; drive < N_DRIVE; drive++) if (!disks[drive][0]) # the last disks is not set and loop break break; blk_mq_free_tag_set() # the latest allocated set->tag leaked Fix this problem by free the set->tag of current drive before jump to error handling path. [efremov: added stable list, changed title]

In the Linux kernel, the following vulnerability has been resolved: cifs: fix oops during encryption When running xfstests against Azure the following oops occurred on an arm64 system Unable to handle kernel write to read-only memory at virtual address ffff0001221cf000 Mem abort info: ESR = 0x9600004f EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x0f: level 3 permission fault Data abort info: ISV = 0, ISS = 0x0000004f CM = 0, WnR = 1 swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000294f3000 [ffff0001221cf000] pgd=18000001ffff8003, p4d=18000001ffff8003, pud=18000001ff82e003, pmd=18000001ff71d003, pte=00600001221cf787 Internal error: Oops: 9600004f [#1] PREEMPT SMP ... pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--) pc : __memcpy+0x40/0x230 lr : scatterwalk_copychunks+0xe0/0x200 sp : ffff800014e92de0 x29: ffff800014e92de0 x28: ffff000114f9de80 x27: 0000000000000008 x26: 0000000000000008 x25: ffff800014e92e78 x24: 0000000000000008 x23: 0000000000000001 x22: 0000040000000000 x21: ffff000000000000 x20: 0000000000000001 x19: ffff0001037c4488 x18: 0000000000000014 x17: 235e1c0d6efa9661 x16: a435f9576b6edd6c x15: 0000000000000058 x14: 0000000000000001 x13: 0000000000000008 x12: ffff000114f2e590 x11: ffffffffffffffff x10: 0000040000000000 x9 : ffff8000105c3580 x8 : 2e9413b10000001a x7 : 534b4410fb86b005 x6 : 534b4410fb86b005 x5 : ffff0001221cf008 x4 : ffff0001037c4490 x3 : 0000000000000001 x2 : 0000000000000008 x1 : ffff0001037c4488 x0 : ffff0001221cf000 Call trace: __memcpy+0x40/0x230 scatterwalk_map_and_copy+0x98/0x100 crypto_ccm_encrypt+0x150/0x180 crypto_aead_encrypt+0x2c/0x40 crypt_message+0x750/0x880 smb3_init_transform_rq+0x298/0x340 smb_send_rqst.part.11+0xd8/0x180 smb_send_rqst+0x3c/0x100 compound_send_recv+0x534/0xbc0 smb2_query_info_compound+0x32c/0x440 smb2_set_ea+0x438/0x4c0 cifs_xattr_set+0x5d4/0x7c0 This is because in scatterwalk_copychunks(), we attempted to write to a buffer (@sign) that was allocated in the stack (vmalloc area) by crypt_message() and thus accessing its remaining 8 (x2) bytes ended up crossing a page boundary. To simply fix it, we could just pass @sign kmalloc'd from crypt_message() and then we're done. Luckily, we don't seem to pass any other vmalloc'd buffers in smb_rqst::rq_iov... Instead, let's map the correct pages and offsets from vmalloc buffers as well in cifs_sg_set_buf() and then avoiding such oopses.

In the Linux kernel, the following vulnerability has been resolved: media: vimc: Fix wrong function called when vimc_init() fails In vimc_init(), when platform_driver_register(&vimc_pdrv) fails, platform_driver_unregister(&vimc_pdrv) is wrongly called rather than platform_device_unregister(&vimc_pdev), which causes kernel warning: Unexpected driver unregister! WARNING: CPU: 1 PID: 14517 at drivers/base/driver.c:270 driver_unregister+0x8f/0xb0 RIP: 0010:driver_unregister+0x8f/0xb0 Call Trace: <TASK> vimc_init+0x7d/0x1000 [vimc] do_one_initcall+0xd0/0x4e0 do_init_module+0x1cf/0x6b0 load_module+0x65c2/0x7820

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: avoid hci_dev_test_and_set_flag() in mgmt_init_hdev() syzbot is again reporting attempt to cancel uninitialized work at mgmt_index_removed() [1], for setting of HCI_MGMT flag from mgmt_init_hdev() from hci_mgmt_cmd() from hci_sock_sendmsg() can race with testing of HCI_MGMT flag from mgmt_index_removed() from hci_sock_bind() due to lack of serialization via hci_dev_lock(). Since mgmt_init_hdev() is called with mgmt_chan_list_lock held, we can safely split hci_dev_test_and_set_flag() into hci_dev_test_flag() and hci_dev_set_flag(). Thus, in order to close this race, set HCI_MGMT flag after INIT_DELAYED_WORK() completed. This is a local fix based on mgmt_chan_list_lock. Lack of serialization via hci_dev_lock() might be causing different race conditions somewhere else. But a global fix based on hci_dev_lock() should deserve a future patch.

Unchecked input for loop condition vulnerability in XML-RPC in Liferay Portal 7.4.0 through 7.4.3.111, and older unsupported versions, and Liferay DXP 2023.Q4.0, 2023.Q3.1 through 2023.Q3.4, 7.4 GA through update 92, 7.3 GA through update 35, and older unsupported versions allows remote attackers to perform a denial-of-service (DoS) attacks via a crafted XML-RPC request.

WebAssembly Micro Runtime (WAMR) is a lightweight standalone WebAssembly (Wasm) runtime. In WAMR versions prior to 2.4.2, when running in LLVM-JIT mode, the runtime cannot exit normally when executing WebAssembly programs containing a memory.fill instruction where the first operand (memory address pointer) is greater than or equal to 2147483648 bytes (2GiB). This causes the runtime to hang in release builds or crash in debug builds due to accessing an invalid pointer. The issue does not occur in FAST-JIT mode or other runtime tools. This has been fixed in version 2.4.2.

Spring Cloud Gateway Server Webflux may be vulnerable to Spring Environment property modification. An application should be considered vulnerable when all the following are true: * The application is using Spring Cloud Gateway Server Webflux (Spring Cloud Gateway Server WebMVC is not vulnerable). * Spring Boot actuator is a dependency. * The Spring Cloud Gateway Server Webflux actuator web endpoint is enabled via management.endpoints.web.exposure.include=gateway. * The actuator endpoints are available to attackers. * The actuator endpoints are unsecured.

A flaw was found in Podman. In a Containerfile or Podman, data written to RUN --mount=type=bind mounts during the podman build is not discarded. This issue can lead to files created within the container appearing in the temporary build context directory on the host, leaving the created files accessible.

psPAS PowerShell module does not explicitly enforce TLS 1.2 within the 'Get-PASSAMLResponse' function during the SAML authentication process. An unauthenticated attacker in a 'Man-in-the-Middle' position could manipulate the TLS handshake and downgrade TLS to a deprecated protocol. Fixed in 7.0.209.

IBM AIX 7.2, 7.3, IBM VIOS 3.1, and 4.1, when configured to use Kerberos network authentication, could allow a local user to write to files on the system with root privileges due to improper initialization of critical variables.

Talkative IRC v0.4.4.16 is vulnerable to a stack-based buffer overflow when processing specially crafted response strings sent to a connected client. An attacker can exploit this flaw by sending an overly long message that overflows a fixed-length buffer, potentially leading to arbitrary code execution in the context of the vulnerable process. This vulnerability is exploitable remotely and does not require authentication.

osCommerce versions up to and including 2.2 RC2a contain a vulnerability in its administrative file manager utility (admin/file_manager.php). The interface allows file uploads and edits without sufficient input validation or access control. An unauthenticated attacker can craft a POST request to upload a .php file containing arbitrary code, which is then executed by the server.

A stack-based buffer overflow exists in the UtilConfigHome.csp endpoint of InterSystems Caché 2009.1. The vulnerability is triggered by sending a specially crafted HTTP GET request containing an oversized argument to the .csp handler. Due to insufficient bounds checking, the input overflows a stack buffer, allowing an attacker to overwrite control structures and execute arbitrary code. It is unknown if this vulnerability was patched and an affected version range remains undefined.

Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in E1 Informatics Web Application allows SQL Injection.This issue affects Web Application: through 20250916.  NOTE: The vendor did not inform about the completion of the fixing process within the specified time. The CVE will be updated when new information becomes available.

A maliciously crafted PDF file, when parsed through certain Autodesk products, can force a Heap-Based Overflow vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process.

The mcp-database-server (MCP Server) 1.1.0 and earlier, as distributed via the npm package @executeautomation/database-server, fails to implement adequate security controls to properly enforce a "read-only" mode. This vulnerability affects only the npm distribution; other distributions are not impacted. As a result, the server is susceptible to abuse and attacks on affected database systems such as PostgreSQL, and potentially others that expose elevated functionalities. These attacks may lead to denial of service and other unexpected behaviors.

A maliciously crafted PDF file, when parsed through certain Autodesk products, can force an Out-of-Bounds Write vulnerability. A malicious actor may leverage this vulnerability to cause a crash, cause data corruption, or execute arbitrary code in the context of the current process.

Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection'), CWE - 200 - Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Arma Store Armalife allows SQL Injection.This issue affects Armalife: through 20250916.  NOTE: The vendor did not inform about the completion of the fixing process within the specified time. The CVE will be updated when new information becomes available.

Authorization Bypass Through User-Controlled Key, Externally Controlled Reference to a Resource in Another Sphere, Improper Authorization vulnerability in Patika Global Technologies HumanSuite allows Exploiting Trust in Client.This issue affects HumanSuite: before 53.21.0.

Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting'), Improper Encoding or Escaping of Output, Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in Patika Global Technologies HumanSuite allows Cross-Site Scripting (XSS), Phishing.This issue affects HumanSuite: before 53.21.0.

Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in Holistic IT, Consultancy Coop. Workcube ERP allows Reflected XSS.This issue affects Workcube ERP: from V12 - V14 before Cognitive.

In the Linux kernel, the following vulnerability has been resolved: efi: stmm: Fix incorrect buffer allocation method The communication buffer allocated by setup_mm_hdr() is later on passed to tee_shm_register_kernel_buf(). The latter expects those buffers to be contiguous pages, but setup_mm_hdr() just uses kmalloc(). That can cause various corruptions or BUGs, specifically since commit 9aec2fb0fd5e ("slab: allocate frozen pages"), though it was broken before as well. Fix this by using alloc_pages_exact() instead of kmalloc().

In the Linux kernel, the following vulnerability has been resolved: xfs: do not propagate ENODATA disk errors into xattr code ENODATA (aka ENOATTR) has a very specific meaning in the xfs xattr code; namely, that the requested attribute name could not be found. However, a medium error from disk may also return ENODATA. At best, this medium error may escape to userspace as "attribute not found" when in fact it's an IO (disk) error. At worst, we may oops in xfs_attr_leaf_get() when we do: error = xfs_attr_leaf_hasname(args, &bp); if (error == -ENOATTR) { xfs_trans_brelse(args->trans, bp); return error; } because an ENODATA/ENOATTR error from disk leaves us with a null bp, and the xfs_trans_brelse will then null-deref it. As discussed on the list, we really need to modify the lower level IO functions to trap all disk errors and ensure that we don't let unique errors like this leak up into higher xfs functions - many like this should be remapped to EIO. However, this patch directly addresses a reported bug in the xattr code, and should be safe to backport to stable kernels. A larger-scope patch to handle more unique errors at lower levels can follow later. (Note, prior to 07120f1abdff we did not oops, but we did return the wrong error code to userspace.)

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: HWS, Fix memory leak in hws_action_get_shared_stc_nic error flow When an invalid stc_type is provided, the function allocates memory for shared_stc but jumps to unlock_and_out without freeing it, causing a memory leak. Fix by jumping to free_shared_stc label instead to ensure proper cleanup.

In the Linux kernel, the following vulnerability has been resolved: mISDN: hfcpci: Fix warning when deleting uninitialized timer With CONFIG_DEBUG_OBJECTS_TIMERS unloading hfcpci module leads to the following splat: [ 250.215892] ODEBUG: assert_init not available (active state 0) object: ffffffffc01a3dc0 object type: timer_list hint: 0x0 [ 250.217520] WARNING: CPU: 0 PID: 233 at lib/debugobjects.c:612 debug_print_object+0x1b6/0x2c0 [ 250.218775] Modules linked in: hfcpci(-) mISDN_core [ 250.219537] CPU: 0 UID: 0 PID: 233 Comm: rmmod Not tainted 6.17.0-rc2-g6f713187ac98 #2 PREEMPT(voluntary) [ 250.220940] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 250.222377] RIP: 0010:debug_print_object+0x1b6/0x2c0 [ 250.223131] Code: fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 75 4f 41 56 48 8b 14 dd a0 4e 01 9f 48 89 ee 48 c7 c7 20 46 01 9f e8 cb 84d [ 250.225805] RSP: 0018:ffff888015ea7c08 EFLAGS: 00010286 [ 250.226608] RAX: 0000000000000000 RBX: 0000000000000005 RCX: ffffffff9be93a95 [ 250.227708] RDX: 1ffff1100d945138 RSI: 0000000000000008 RDI: ffff88806ca289c0 [ 250.228993] RBP: ffffffff9f014a00 R08: 0000000000000001 R09: ffffed1002bd4f39 [ 250.230043] R10: ffff888015ea79cf R11: 0000000000000001 R12: 0000000000000001 [ 250.231185] R13: ffffffff9eea0520 R14: 0000000000000000 R15: ffff888015ea7cc8 [ 250.232454] FS: 00007f3208f01540(0000) GS:ffff8880caf5a000(0000) knlGS:0000000000000000 [ 250.233851] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 250.234856] CR2: 00007f32090a7421 CR3: 0000000004d63000 CR4: 00000000000006f0 [ 250.236117] Call Trace: [ 250.236599] <TASK> [ 250.236967] ? trace_irq_enable.constprop.0+0xd4/0x130 [ 250.237920] debug_object_assert_init+0x1f6/0x310 [ 250.238762] ? __pfx_debug_object_assert_init+0x10/0x10 [ 250.239658] ? __lock_acquire+0xdea/0x1c70 [ 250.240369] __try_to_del_timer_sync+0x69/0x140 [ 250.241172] ? __pfx___try_to_del_timer_sync+0x10/0x10 [ 250.242058] ? __timer_delete_sync+0xc6/0x120 [ 250.242842] ? lock_acquire+0x30/0x80 [ 250.243474] ? __timer_delete_sync+0xc6/0x120 [ 250.244262] __timer_delete_sync+0x98/0x120 [ 250.245015] HFC_cleanup+0x10/0x20 [hfcpci] [ 250.245704] __do_sys_delete_module+0x348/0x510 [ 250.246461] ? __pfx___do_sys_delete_module+0x10/0x10 [ 250.247338] do_syscall_64+0xc1/0x360 [ 250.247924] entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by initializing hfc_tl timer with DEFINE_TIMER macro. Also, use mod_timer instead of manual timeout update.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix lockdep assertion on sync reset unload event Fix lockdep assertion triggered during sync reset unload event. When the sync reset flow is initiated using the devlink reload fw_activate option, the PF already holds the devlink lock while handling unload event. In this case, delegate sync reset unload event handling back to the devlink callback process to avoid double-locking and resolve the lockdep warning. Kernel log: WARNING: CPU: 9 PID: 1578 at devl_assert_locked+0x31/0x40 [...] Call Trace: <TASK> mlx5_unload_one_devl_locked+0x2c/0xc0 [mlx5_core] mlx5_sync_reset_unload_event+0xaf/0x2f0 [mlx5_core] process_one_work+0x222/0x640 worker_thread+0x199/0x350 kthread+0x10b/0x230 ? __pfx_worker_thread+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x8e/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: fbnic: Move phylink resume out of service_task and into open/close The fbnic driver was presenting with the following locking assert coming out of a PM resume: [ 42.208116][ T164] RTNL: assertion failed at drivers/net/phy/phylink.c (2611) [ 42.208492][ T164] WARNING: CPU: 1 PID: 164 at drivers/net/phy/phylink.c:2611 phylink_resume+0x190/0x1e0 [ 42.208872][ T164] Modules linked in: [ 42.209140][ T164] CPU: 1 UID: 0 PID: 164 Comm: bash Not tainted 6.17.0-rc2-virtme #134 PREEMPT(full) [ 42.209496][ T164] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014 [ 42.209861][ T164] RIP: 0010:phylink_resume+0x190/0x1e0 [ 42.210057][ T164] Code: 83 e5 01 0f 85 b0 fe ff ff c6 05 1c cd 3e 02 01 90 ba 33 0a 00 00 48 c7 c6 20 3a 1d a5 48 c7 c7 e0 3e 1d a5 e8 21 b8 90 fe 90 <0f> 0b 90 90 e9 86 fe ff ff e8 42 ea 1f ff e9 e2 fe ff ff 48 89 ef [ 42.210708][ T164] RSP: 0018:ffffc90000affbd8 EFLAGS: 00010296 [ 42.210983][ T164] RAX: 0000000000000000 RBX: ffff8880078d8400 RCX: 0000000000000000 [ 42.211235][ T164] RDX: 0000000000000000 RSI: 1ffffffff4f10938 RDI: 0000000000000001 [ 42.211466][ T164] RBP: 0000000000000000 R08: ffffffffa2ae79ea R09: fffffbfff4b3eb84 [ 42.211707][ T164] R10: 0000000000000003 R11: 0000000000000000 R12: ffff888007ad8000 [ 42.211997][ T164] R13: 0000000000000002 R14: ffff888006a18800 R15: ffffffffa34c59e0 [ 42.212234][ T164] FS: 00007f0dc8e39740(0000) GS:ffff88808f51f000(0000) knlGS:0000000000000000 [ 42.212505][ T164] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 42.212704][ T164] CR2: 00007f0dc8e9fe10 CR3: 000000000b56d003 CR4: 0000000000772ef0 [ 42.213227][ T164] PKRU: 55555554 [ 42.213366][ T164] Call Trace: [ 42.213483][ T164] <TASK> [ 42.213565][ T164] __fbnic_pm_attach.isra.0+0x8e/0xa0 [ 42.213725][ T164] pci_reset_function+0x116/0x1d0 [ 42.213895][ T164] reset_store+0xa0/0x100 [ 42.214025][ T164] ? pci_dev_reset_attr_is_visible+0x50/0x50 [ 42.214221][ T164] ? sysfs_file_kobj+0xc1/0x1e0 [ 42.214374][ T164] ? sysfs_kf_write+0x65/0x160 [ 42.214526][ T164] kernfs_fop_write_iter+0x2f8/0x4c0 [ 42.214677][ T164] ? kernfs_vma_page_mkwrite+0x1f0/0x1f0 [ 42.214836][ T164] new_sync_write+0x308/0x6f0 [ 42.214987][ T164] ? __lock_acquire+0x34c/0x740 [ 42.215135][ T164] ? new_sync_read+0x6f0/0x6f0 [ 42.215288][ T164] ? lock_acquire.part.0+0xbc/0x260 [ 42.215440][ T164] ? ksys_write+0xff/0x200 [ 42.215590][ T164] ? perf_trace_sched_switch+0x6d0/0x6d0 [ 42.215742][ T164] vfs_write+0x65e/0xbb0 [ 42.215876][ T164] ksys_write+0xff/0x200 [ 42.215994][ T164] ? __ia32_sys_read+0xc0/0xc0 [ 42.216141][ T164] ? do_user_addr_fault+0x269/0x9f0 [ 42.216292][ T164] ? rcu_is_watching+0x15/0xd0 [ 42.216442][ T164] do_syscall_64+0xbb/0x360 [ 42.216591][ T164] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 42.216784][ T164] RIP: 0033:0x7f0dc8ea9986 A bit of digging showed that we were invoking the phylink_resume as a part of the fbnic_up path when we were enabling the service task while not holding the RTNL lock. We should be enabling this sooner as a part of the ndo_open path and then just letting the service task come online later. This will help to enforce the correct locking and brings the phylink interface online at the same time as the network interface, instead of at a later time. I tested this on QEMU to verify this was working by putting the system to sleep using "echo mem > /sys/power/state" to put the system to sleep in the guest and then using the command "system_wakeup" in the QEMU monitor.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: HWS, Fix memory leak in hws_pool_buddy_init error path In the error path of hws_pool_buddy_init(), the buddy allocator cleanup doesn't free the allocator structure itself, causing a memory leak. Add the missing kfree() to properly release all allocated memory.

In the Linux kernel, the following vulnerability has been resolved: trace/fgraph: Fix the warning caused by missing unregister notifier This warning was triggered during testing on v6.16: notifier callback ftrace_suspend_notifier_call already registered WARNING: CPU: 2 PID: 86 at kernel/notifier.c:23 notifier_chain_register+0x44/0xb0 ... Call Trace: <TASK> blocking_notifier_chain_register+0x34/0x60 register_ftrace_graph+0x330/0x410 ftrace_profile_write+0x1e9/0x340 vfs_write+0xf8/0x420 ? filp_flush+0x8a/0xa0 ? filp_close+0x1f/0x30 ? do_dup2+0xaf/0x160 ksys_write+0x65/0xe0 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x77/0x7f When writing to the function_profile_enabled interface, the notifier was not unregistered after start_graph_tracing failed, causing a warning the next time function_profile_enabled was written. Fixed by adding unregister_pm_notifier in the exception path.

In the Linux kernel, the following vulnerability has been resolved: atm: atmtcp: Prevent arbitrary write in atmtcp_recv_control(). syzbot reported the splat below. [0] When atmtcp_v_open() or atmtcp_v_close() is called via connect() or close(), atmtcp_send_control() is called to send an in-kernel special message. The message has ATMTCP_HDR_MAGIC in atmtcp_control.hdr.length. Also, a pointer of struct atm_vcc is set to atmtcp_control.vcc. The notable thing is struct atmtcp_control is uAPI but has a space for an in-kernel pointer. struct atmtcp_control { struct atmtcp_hdr hdr; /* must be first */ ... atm_kptr_t vcc; /* both directions */ ... } __ATM_API_ALIGN; typedef struct { unsigned char _[8]; } __ATM_API_ALIGN atm_kptr_t; The special message is processed in atmtcp_recv_control() called from atmtcp_c_send(). atmtcp_c_send() is vcc->dev->ops->send() and called from 2 paths: 1. .ndo_start_xmit() (vcc->send() == atm_send_aal0()) 2. vcc_sendmsg() The problem is sendmsg() does not validate the message length and userspace can abuse atmtcp_recv_control() to overwrite any kptr by atmtcp_control. Let's add a new ->pre_send() hook to validate messages from sendmsg(). [0]: Oops: general protection fault, probably for non-canonical address 0xdffffc00200000ab: 0000 [#1] SMP KASAN PTI KASAN: probably user-memory-access in range [0x0000000100000558-0x000000010000055f] CPU: 0 UID: 0 PID: 5865 Comm: syz-executor331 Not tainted 6.17.0-rc1-syzkaller-00215-gbab3ce404553 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025 RIP: 0010:atmtcp_recv_control drivers/atm/atmtcp.c:93 [inline] RIP: 0010:atmtcp_c_send+0x1da/0x950 drivers/atm/atmtcp.c:297 Code: 4d 8d 75 1a 4c 89 f0 48 c1 e8 03 42 0f b6 04 20 84 c0 0f 85 15 06 00 00 41 0f b7 1e 4d 8d b7 60 05 00 00 4c 89 f0 48 c1 e8 03 <42> 0f b6 04 20 84 c0 0f 85 13 06 00 00 66 41 89 1e 4d 8d 75 1c 4c RSP: 0018:ffffc90003f5f810 EFLAGS: 00010203 RAX: 00000000200000ab RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88802a510000 RSI: 00000000ffffffff RDI: ffff888030a6068c RBP: ffff88802699fb40 R08: ffff888030a606eb R09: 1ffff1100614c0dd R10: dffffc0000000000 R11: ffffffff8718fc40 R12: dffffc0000000000 R13: ffff888030a60680 R14: 000000010000055f R15: 00000000ffffffff FS: 00007f8d7e9236c0(0000) GS:ffff888125c1c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000045ad50 CR3: 0000000075bde000 CR4: 00000000003526f0 Call Trace: <TASK> vcc_sendmsg+0xa10/0xc60 net/atm/common.c:645 sock_sendmsg_nosec net/socket.c:714 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:729 ____sys_sendmsg+0x505/0x830 net/socket.c:2614 ___sys_sendmsg+0x21f/0x2a0 net/socket.c:2668 __sys_sendmsg net/socket.c:2700 [inline] __do_sys_sendmsg net/socket.c:2705 [inline] __se_sys_sendmsg net/socket.c:2703 [inline] __x64_sys_sendmsg+0x19b/0x260 net/socket.c:2703 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f8d7e96a4a9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f8d7e923198 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f8d7e9f4308 RCX: 00007f8d7e96a4a9 RDX: 0000000000000000 RSI: 0000200000000240 RDI: 0000000000000005 RBP: 00007f8d7e9f4300 R08: 65732f636f72702f R09: 65732f636f72702f R10: 65732f636f72702f R11: 0000000000000246 R12: 00007f8d7e9c10ac R13: 00007f8d7e9231a0 R14: 0000200000000200 R15: 0000200000000250 </TASK> Modules linked in:

In the Linux kernel, the following vulnerability has been resolved: net: rose: include node references in rose_neigh refcount Current implementation maintains two separate reference counting mechanisms: the 'count' field in struct rose_neigh tracks references from rose_node structures, while the 'use' field (now refcount_t) tracks references from rose_sock. This patch merges these two reference counting systems using 'use' field for proper reference management. Specifically, this patch adds incrementing and decrementing of rose_neigh->use when rose_neigh->count is incremented or decremented. This patch also modifies rose_rt_free(), rose_rt_device_down() and rose_clear_route() to properly release references to rose_neigh objects before freeing a rose_node through rose_remove_node(). These changes ensure rose_neigh structures are properly freed only when all references, including those from rose_node structures, are released. As a result, this resolves a slab-use-after-free issue reported by Syzbot.

In the Linux kernel, the following vulnerability has been resolved: net: rose: convert 'use' field to refcount_t The 'use' field in struct rose_neigh is used as a reference counter but lacks atomicity. This can lead to race conditions where a rose_neigh structure is freed while still being referenced by other code paths. For example, when rose_neigh->use becomes zero during an ioctl operation via rose_rt_ioctl(), the structure may be removed while its timer is still active, potentially causing use-after-free issues. This patch changes the type of 'use' from unsigned short to refcount_t and updates all code paths to use rose_neigh_hold() and rose_neigh_put() which operate reference counts atomically.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix race with concurrent opens in rename(2) Besides sending the rename request to the server, the rename process also involves closing any deferred close, waiting for outstanding I/O to complete as well as marking all existing open handles as deleted to prevent them from deferring closes, which increases the race window for potential concurrent opens on the target file. Fix this by unhashing the dentry in advance to prevent any concurrent opens on the target.

In the Linux kernel, the following vulnerability has been resolved: HID: asus: fix UAF via HID_CLAIMED_INPUT validation After hid_hw_start() is called hidinput_connect() will eventually be called to set up the device with the input layer since the HID_CONNECT_DEFAULT connect mask is used. During hidinput_connect() all input and output reports are processed and corresponding hid_inputs are allocated and configured via hidinput_configure_usages(). This process involves slot tagging report fields and configuring usages by setting relevant bits in the capability bitmaps. However it is possible that the capability bitmaps are not set at all leading to the subsequent hidinput_has_been_populated() check to fail leading to the freeing of the hid_input and the underlying input device. This becomes problematic because a malicious HID device like a ASUS ROG N-Key keyboard can trigger the above scenario via a specially crafted descriptor which then leads to a user-after-free when the name of the freed input device is written to later on after hid_hw_start(). Below, report 93 intentionally utilises the HID_UP_UNDEFINED Usage Page which is skipped during usage configuration, leading to the frees. 0x05, 0x0D, // Usage Page (Digitizer) 0x09, 0x05, // Usage (Touch Pad) 0xA1, 0x01, // Collection (Application) 0x85, 0x0D, // Report ID (13) 0x06, 0x00, 0xFF, // Usage Page (Vendor Defined 0xFF00) 0x09, 0xC5, // Usage (0xC5) 0x15, 0x00, // Logical Minimum (0) 0x26, 0xFF, 0x00, // Logical Maximum (255) 0x75, 0x08, // Report Size (8) 0x95, 0x04, // Report Count (4) 0xB1, 0x02, // Feature (Data,Var,Abs) 0x85, 0x5D, // Report ID (93) 0x06, 0x00, 0x00, // Usage Page (Undefined) 0x09, 0x01, // Usage (0x01) 0x15, 0x00, // Logical Minimum (0) 0x26, 0xFF, 0x00, // Logical Maximum (255) 0x75, 0x08, // Report Size (8) 0x95, 0x1B, // Report Count (27) 0x81, 0x02, // Input (Data,Var,Abs) 0xC0, // End Collection Below is the KASAN splat after triggering the UAF: [ 21.672709] ================================================================== [ 21.673700] BUG: KASAN: slab-use-after-free in asus_probe+0xeeb/0xf80 [ 21.673700] Write of size 8 at addr ffff88810a0ac000 by task kworker/1:2/54 [ 21.673700] [ 21.673700] CPU: 1 UID: 0 PID: 54 Comm: kworker/1:2 Not tainted 6.16.0-rc4-g9773391cf4dd-dirty #36 PREEMPT(voluntary) [ 21.673700] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 [ 21.673700] Call Trace: [ 21.673700] <TASK> [ 21.673700] dump_stack_lvl+0x5f/0x80 [ 21.673700] print_report+0xd1/0x660 [ 21.673700] kasan_report+0xe5/0x120 [ 21.673700] __asan_report_store8_noabort+0x1b/0x30 [ 21.673700] asus_probe+0xeeb/0xf80 [ 21.673700] hid_device_probe+0x2ee/0x700 [ 21.673700] really_probe+0x1c6/0x6b0 [ 21.673700] __driver_probe_device+0x24f/0x310 [ 21.673700] driver_probe_device+0x4e/0x220 [...] [ 21.673700] [ 21.673700] Allocated by task 54: [ 21.673700] kasan_save_stack+0x3d/0x60 [ 21.673700] kasan_save_track+0x18/0x40 [ 21.673700] kasan_save_alloc_info+0x3b/0x50 [ 21.673700] __kasan_kmalloc+0x9c/0xa0 [ 21.673700] __kmalloc_cache_noprof+0x139/0x340 [ 21.673700] input_allocate_device+0x44/0x370 [ 21.673700] hidinput_connect+0xcb6/0x2630 [ 21.673700] hid_connect+0xf74/0x1d60 [ 21.673700] hid_hw_start+0x8c/0x110 [ 21.673700] asus_probe+0x5a3/0xf80 [ 21.673700] hid_device_probe+0x2ee/0x700 [ 21.673700] really_probe+0x1c6/0x6b0 [ 21.673700] __driver_probe_device+0x24f/0x310 [ 21.673700] driver_probe_device+0x4e/0x220 [...] [ 21.673700] [ 21.673700] Freed by task 54: [ 21.673700] kasan_save_stack+0x3d/0x60 [ 21.673700] kasan_save_track+0x18/0x40 [ 21.673700] kasan_save_free_info+0x3f/0x60 [ 21.673700] __kasan_slab_free+0x3c/0x50 [ 21.673700] kfre ---truncated---

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: use array_index_nospec with indices that come from guest min and dest_id are guest-controlled indices. Using array_index_nospec() after the bounds checks clamps these values to mitigate speculative execution side-channels.

In the Linux kernel, the following vulnerability has been resolved: io_uring/kbuf: fix signedness in this_len calculation When importing and using buffers, buf->len is considered unsigned. However, buf->len is converted to signed int when committing. This can lead to unexpected behavior if the buffer is large enough to be interpreted as a negative value. Make min_t calculation unsigned.

In the Linux kernel, the following vulnerability has been resolved: perf: Avoid undefined behavior from stopping/starting inactive events Calling pmu->start()/stop() on perf events in PERF_EVENT_STATE_OFF can leave event->hw.idx at -1. When PMU drivers later attempt to use this negative index as a shift exponent in bitwise operations, it leads to UBSAN shift-out-of-bounds reports. The issue is a logical flaw in how event groups handle throttling when some members are intentionally disabled. Based on the analysis and the reproducer provided by Mark Rutland (this issue on both arm64 and x86-64). The scenario unfolds as follows: 1. A group leader event is configured with a very aggressive sampling period (e.g., sample_period = 1). This causes frequent interrupts and triggers the throttling mechanism. 2. A child event in the same group is created in a disabled state (.disabled = 1). This event remains in PERF_EVENT_STATE_OFF. Since it hasn't been scheduled onto the PMU, its event->hw.idx remains initialized at -1. 3. When throttling occurs, perf_event_throttle_group() and later perf_event_unthrottle_group() iterate through all siblings, including the disabled child event. 4. perf_event_throttle()/unthrottle() are called on this inactive child event, which then call event->pmu->start()/stop(). 5. The PMU driver receives the event with hw.idx == -1 and attempts to use it as a shift exponent. e.g., in macros like PMCNTENSET(idx), leading to the UBSAN report. The throttling mechanism attempts to start/stop events that are not actively scheduled on the hardware. Move the state check into perf_event_throttle()/perf_event_unthrottle() so that inactive events are skipped entirely. This ensures only active events with a valid hw.idx are processed, preventing undefined behavior and silencing UBSAN warnings. The corrected check ensures true before proceeding with PMU operations. The problem can be reproduced with the syzkaller reproducer:

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: Add a null ptr check for dpu_encoder_needs_modeset The drm_atomic_get_new_connector_state() can return NULL if the connector is not part of the atomic state. Add a check to prevent a NULL pointer dereference. This follows the same pattern used in dpu_encoder_update_topology() within the same file, which checks for NULL before using conn_state. Patchwork: https://patchwork.freedesktop.org/patch/665188/

In the Linux kernel, the following vulnerability has been resolved: fs/smb: Fix inconsistent refcnt update A possible inconsistent update of refcount was identified in `smb2_compound_op`. Such inconsistent update could lead to possible resource leaks. Why it is a possible bug: 1. In the comment section of the function, it clearly states that the reference to `cfile` should be dropped after calling this function. 2. Every control flow path would check and drop the reference to `cfile`, except the patched one. 3. Existing callers would not handle refcount update of `cfile` if -ENOMEM is returned. To fix the bug, an extra goto label "out" is added, to make sure that the cleanup logic would always be respected. As the problem is caused by the allocation failure of `vars`, the cleanup logic between label "finished" and "out" can be safely ignored. According to the definition of function `is_replayable_error`, the error code of "-ENOMEM" is not recoverable. Therefore, the replay logic also gets ignored.

In the Linux kernel, the following vulnerability has been resolved: HID: intel-thc-hid: intel-thc: Fix incorrect pointer arithmetic in I2C regs save Improper use of secondary pointer (&dev->i2c_subip_regs) caused kernel crash and out-of-bounds error: BUG: KASAN: slab-out-of-bounds in _regmap_bulk_read+0x449/0x510 Write of size 4 at addr ffff888136005dc0 by task kworker/u33:5/5107 CPU: 3 UID: 0 PID: 5107 Comm: kworker/u33:5 Not tainted 6.16.0+ #3 PREEMPT(voluntary) Workqueue: async async_run_entry_fn Call Trace: <TASK> dump_stack_lvl+0x76/0xa0 print_report+0xd1/0x660 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? kasan_complete_mode_report_info+0x26/0x200 kasan_report+0xe1/0x120 ? _regmap_bulk_read+0x449/0x510 ? _regmap_bulk_read+0x449/0x510 __asan_report_store4_noabort+0x17/0x30 _regmap_bulk_read+0x449/0x510 ? __pfx__regmap_bulk_read+0x10/0x10 regmap_bulk_read+0x270/0x3d0 pio_complete+0x1ee/0x2c0 [intel_thc] ? __pfx_pio_complete+0x10/0x10 [intel_thc] ? __pfx_pio_wait+0x10/0x10 [intel_thc] ? regmap_update_bits_base+0x13b/0x1f0 thc_i2c_subip_pio_read+0x117/0x270 [intel_thc] thc_i2c_subip_regs_save+0xc2/0x140 [intel_thc] ? __pfx_thc_i2c_subip_regs_save+0x10/0x10 [intel_thc] [...] The buggy address belongs to the object at ffff888136005d00 which belongs to the cache kmalloc-rnd-12-192 of size 192 The buggy address is located 0 bytes to the right of allocated 192-byte region [ffff888136005d00, ffff888136005dc0) Replaced with direct array indexing (&dev->i2c_subip_regs[i]) to ensure safe memory access.

In the Linux kernel, the following vulnerability has been resolved: efivarfs: Fix slab-out-of-bounds in efivarfs_d_compare Observed on kernel 6.6 (present on master as well): BUG: KASAN: slab-out-of-bounds in memcmp+0x98/0xd0 Call trace: kasan_check_range+0xe8/0x190 __asan_loadN+0x1c/0x28 memcmp+0x98/0xd0 efivarfs_d_compare+0x68/0xd8 __d_lookup_rcu_op_compare+0x178/0x218 __d_lookup_rcu+0x1f8/0x228 d_alloc_parallel+0x150/0x648 lookup_open.isra.0+0x5f0/0x8d0 open_last_lookups+0x264/0x828 path_openat+0x130/0x3f8 do_filp_open+0x114/0x248 do_sys_openat2+0x340/0x3c0 __arm64_sys_openat+0x120/0x1a0 If dentry->d_name.len < EFI_VARIABLE_GUID_LEN , 'guid' can become negative, leadings to oob. The issue can be triggered by parallel lookups using invalid filename: T1 T2 lookup_open ->lookup simple_lookup d_add // invalid dentry is added to hash list lookup_open d_alloc_parallel __d_lookup_rcu __d_lookup_rcu_op_compare hlist_bl_for_each_entry_rcu // invalid dentry can be retrieved ->d_compare efivarfs_d_compare // oob Fix it by checking 'guid' before cmp.

In the Linux kernel, the following vulnerability has been resolved: io_uring/kbuf: always use READ_ONCE() to read ring provided buffer lengths Since the buffers are mapped from userspace, it is prudent to use READ_ONCE() to read the value into a local variable, and use that for any other actions taken. Having a stable read of the buffer length avoids worrying about it changing after checking, or being read multiple times. Similarly, the buffer may well change in between it being picked and being committed. Ensure the looping for incremental ring buffer commit stops if it hits a zero sized buffer, as no further progress can be made at that point.

In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: fix stack overrun when loading vlenb The userspace load can put up to 2048 bits into an xlen bit stack buffer. We want only xlen bits, so check the size beforehand.

In the Linux kernel, the following vulnerability has been resolved: ice: fix NULL pointer dereference in ice_unplug_aux_dev() on reset Issuing a reset when the driver is loaded without RDMA support, will results in a crash as it attempts to remove RDMA's non-existent auxbus device: echo 1 > /sys/class/net/<if>/device/reset BUG: kernel NULL pointer dereference, address: 0000000000000008 ... RIP: 0010:ice_unplug_aux_dev+0x29/0x70 [ice] ... Call Trace: <TASK> ice_prepare_for_reset+0x77/0x260 [ice] pci_dev_save_and_disable+0x2c/0x70 pci_reset_function+0x88/0x130 reset_store+0x5a/0xa0 kernfs_fop_write_iter+0x15e/0x210 vfs_write+0x273/0x520 ksys_write+0x6b/0xe0 do_syscall_64+0x79/0x3b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ice_unplug_aux_dev() checks pf->cdev_info->adev for NULL pointer, but pf->cdev_info will also be NULL, leading to the deref in the trace above. Introduce a flag to be set when the creation of the auxbus device is successful, to avoid multiple NULL pointer checks in ice_unplug_aux_dev().

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix potential warning in trace_printk_seq during ftrace_dump When calling ftrace_dump_one() concurrently with reading trace_pipe, a WARN_ON_ONCE() in trace_printk_seq() can be triggered due to a race condition. The issue occurs because: CPU0 (ftrace_dump) CPU1 (reader) echo z > /proc/sysrq-trigger !trace_empty(&iter) trace_iterator_reset(&iter) <- len = size = 0 cat /sys/kernel/tracing/trace_pipe trace_find_next_entry_inc(&iter) __find_next_entry ring_buffer_empty_cpu <- all empty return NULL trace_printk_seq(&iter.seq) WARN_ON_ONCE(s->seq.len >= s->seq.size) In the context between trace_empty() and trace_find_next_entry_inc() during ftrace_dump, the ring buffer data was consumed by other readers. This caused trace_find_next_entry_inc to return NULL, failing to populate `iter.seq`. At this point, due to the prior trace_iterator_reset, both `iter.seq.len` and `iter.seq.size` were set to 0. Since they are equal, the WARN_ON_ONCE condition is triggered. Move the trace_printk_seq() into the if block that checks to make sure the return value of trace_find_next_entry_inc() is non-NULL in ftrace_dump_one(), ensuring the 'iter.seq' is properly populated before subsequent operations.

In the Linux kernel, the following vulnerability has been resolved: sctp: initialize more fields in sctp_v6_from_sk() syzbot found that sin6_scope_id was not properly initialized, leading to undefined behavior. Clear sin6_scope_id and sin6_flowinfo. BUG: KMSAN: uninit-value in __sctp_v6_cmp_addr+0x887/0x8c0 net/sctp/ipv6.c:649 __sctp_v6_cmp_addr+0x887/0x8c0 net/sctp/ipv6.c:649 sctp_inet6_cmp_addr+0x4f2/0x510 net/sctp/ipv6.c:983 sctp_bind_addr_conflict+0x22a/0x3b0 net/sctp/bind_addr.c:390 sctp_get_port_local+0x21eb/0x2440 net/sctp/socket.c:8452 sctp_get_port net/sctp/socket.c:8523 [inline] sctp_listen_start net/sctp/socket.c:8567 [inline] sctp_inet_listen+0x710/0xfd0 net/sctp/socket.c:8636 __sys_listen_socket net/socket.c:1912 [inline] __sys_listen net/socket.c:1927 [inline] __do_sys_listen net/socket.c:1932 [inline] __se_sys_listen net/socket.c:1930 [inline] __x64_sys_listen+0x343/0x4c0 net/socket.c:1930 x64_sys_call+0x271d/0x3e20 arch/x86/include/generated/asm/syscalls_64.h:51 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable addr.i.i created at: sctp_get_port net/sctp/socket.c:8515 [inline] sctp_listen_start net/sctp/socket.c:8567 [inline] sctp_inet_listen+0x650/0xfd0 net/sctp/socket.c:8636 __sys_listen_socket net/socket.c:1912 [inline] __sys_listen net/socket.c:1927 [inline] __do_sys_listen net/socket.c:1932 [inline] __se_sys_listen net/socket.c:1930 [inline] __x64_sys_listen+0x343/0x4c0 net/socket.c:1930

In the Linux kernel, the following vulnerability has been resolved: drm/xe/vm: Clear the scratch_pt pointer on error Avoid triggering a dereference of an error pointer on cleanup in xe_vm_free_scratch() by clearing any scratch_pt error pointer. (cherry picked from commit 358ee50ab565f3c8ea32480e9d03127a81ba32f8)