Pterodactyl before 0.7.14 with 2FA allows credential sniffing.

On Coldcard MK1 and MK2 devices, a side channel for the row-based OLED display was found. The power consumption of each row-based display cycle depends on the number of illuminated pixels, allowing a partial recovery of display contents. For example, a hardware implant in the USB cable might be able to leverage this behavior to recover confidential secrets such as the PIN and BIP39 mnemonic. In other words, the side channel is relevant only if the attacker has enough control over the device's USB connection to make power-consumption measurements at a time when secret data is displayed. The side channel is not relevant in other circumstances, such as a stolen device that is not currently displaying secret data. On Coldcard MK1 and MK2 devices, a side channel for the row-based OLED display was found. The power consumption of each row-based display cycle depends on the number of illuminated pixels, allowing a partial recovery of display contents. For example, a hardware implant in the USB cable might be able to leverage this behavior to recover confidential secrets such as the PIN and BIP39 mnemonic. In other words, the side channel is relevant only if the attacker has enough control over the device's USB connection to make power-consumption measurements at a time when secret data is displayed. The side channel is not relevant in other circumstances, such as a stolen device that is not currently displaying secret data. NOTE: At Coinkite, we’ve already mitigated it, even though we feel strongly that it is not a legitimate issue. In our opinion, it is both unproven (might not even work) and also completely impractical—even if it could be made to work perfectly

InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 authentication process response indicates and validates the existence of a username. This may allow an attacker to enumerate different user accounts.

CyberArk Identity 21.5.131, when handling an invalid authentication attempt, sometimes reveals whether the username is valid. In certain authentication policy configurations with MFA, the API response length can be used to differentiate between a valid user and an invalid one (aka Username Enumeration). Response differentiation enables attackers to enumerate usernames of valid application users. Attackers can use this information to leverage brute-force and dictionary attacks in order to discover valid account information such as passwords.

Versions before 8.9.1, Various resources in Jira responded with a 404 instead of redirecting unauthenticated users to the login page, in some situations this may have allowed unauthorised attackers to determine if certain resources exist or not through an Information Disclosure vulnerability.

In CentOS-WebPanel.com (aka CWP) CentOS Web Panel 0.9.8.846, the Login process allows attackers to check whether a username is valid by reading the HTTP response.

Redmine before 4.0.9 and 4.1.x before 4.1.3 allows an attacker to learn the values of internal authentication keys by observing timing differences in string comparison operations within SysController and MailHandlerController.

IBM Guardium Data Encryption (GDE) 5.0.0.2 behaves differently or sends different responses under different circumstances in a way that is observable to an unauthorized actor, which could facilitate username enumeration. IBM X-Force ID: 213856.

An issue was discovered in Arm Mbed TLS before 2.23.0. A side channel allows recovery of an ECC private key, related to mbedtls_ecp_check_pub_priv, mbedtls_pk_parse_key, mbedtls_pk_parse_keyfile, mbedtls_ecp_mul, and mbedtls_ecp_mul_restartable.

An issue was discovered in Arm Mbed TLS before 2.23.0. Because of a side channel in modular exponentiation, an RSA private key used in a secure enclave could be disclosed.

The Poll Maker WordPress plugin before 3.4.2 allows unauthenticated users to perform SQL injection via the ays_finish_poll AJAX action. While the result is not disclosed in the response, it is possible to use a timing attack to exfiltrate data such as password hash.

An information leak in Nabu Casa Home Assistant Operating System and Home Assistant Supervised 2022.03 allows a DNS operator to gain knowledge about internal network resources via the hardcoded DNS resolver configuration.

An issue was discovered in MediaWiki before 1.35.1. Missing users (accounts that don't exist) and hidden users (accounts that have been explicitly hidden due to being abusive, or similar) that the viewer cannot see are handled differently, exposing sensitive information about the hidden status to unprivileged viewers. This exists on various code paths.

When binding against a DN during authentication, the reply from 389-ds-base will be different whether the DN exists or not. This can be used by an unauthenticated attacker to check the existence of an entry in the LDAP database.

CA Technologies Identity Governance 12.6, 14.0, 14.1, and 14.2 and CA Identity Suite Virtual Appliance 14.0, 14.1, and 14.2 provide telling error messages that may allow remote attackers to enumerate account names.

The RSA and DSA decryption code in Nettle makes it easier for attackers to discover private keys via a cache side channel attack.

An issue was discovered in UTI Mutual fund Android application 5.4.18 and prior, allows attackers to brute force enumeration of usernames determined by the error message returned after invalid credentials are attempted.

An issue was discovered in the SecurePoll extension for MediaWiki through 1.35.1. The non-admin vote list contains a full vote timestamp, which may provide unintended clues about how a voting process unfolded.

In Jenkins 2.355 and earlier, LTS 2.332.3 and earlier, an observable timing discrepancy on the login form allows distinguishing between login attempts with an invalid username, and login attempts with a valid username and wrong password, when using the Jenkins user database security realm.

HumHub Social Network Kit Enterprise v1.3.13 allows remote attackers to find the user accounts existing on any Social Network Kits (including self-hosted ones) by brute-forcing the username after the /u/ initial URI substring, aka Response Discrepancy Information Exposure.

In NocoDB, versions 0.9 to 0.83.8 are vulnerable to Observable Discrepancy in the password-reset feature. When requesting a password reset for a given email address, the application displays an error message when the email isn't registered within the system. This allows attackers to enumerate the registered users' email addresses.

Flask-AppBuilder is an application development framework, built on top of the Flask web framework. In affected versions there exists a user enumeration vulnerability. This vulnerability allows for a non authenticated user to enumerate existing accounts by timing the response time from the server when you are logging in. Users are advised to upgrade to version 3.4.4 as soon as possible. There are no known workarounds for this issue.

mailboxd in Zimbra Collaboration Suite 8.8 before 8.8.8; 8.7 before 8.7.11.Patch3; and 8.6 allows Account Enumeration by leveraging a Discrepancy between the "HTTP 404 - account is not active" and "HTTP 401 - must authenticate" errors.

A vulnerability in Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection could allow an unauthenticated, remote attacker to perform a timing attack. This vulnerability is due to insufficient protection of a system password. An attacker could exploit this vulnerability by observing the time it takes the system to respond to various queries. A successful exploit could allow the attacker to determine a sensitive system password.

A vulnerability in the RADIUS authentication module of Cisco Policy Suite could allow an unauthenticated, remote attacker to determine whether a subscriber username is valid. The vulnerability occurs because the Cisco Policy Suite RADIUS server component returns different authentication failure messages based on the validity of usernames. An attacker could use these messages to determine whether a valid subscriber username has been identified. The attacker could use this information in subsequent attacks against the system. Cisco Bug IDs: CSCvg47830.

An email address enumeration vulnerability exists in the password reset function of Rocket.Chat through 3.9.1.

Jetty through 9.4.x is prone to a timing channel in util/security/Password.java, which makes it easier for remote attackers to obtain access by observing elapsed times before rejection of incorrect passwords.

The firewall in Astaro Security Linux before 4.024 sends responses to SYN-FIN packets, which makes it easier for remote attackers to obtain information about the system and construct specialized attacks.

AIX 4.3.3 through AIX 5.1, when direct remote login is disabled, displays a different message if the password is correct, which allows remote attackers to guess the password via brute force methods.

Fixed in v1.5.1, Argo version v1.5.0 was vulnerable to a user-enumeration vulnerability which allowed attackers to determine the usernames of valid (non-SSO) accounts because /api/v1/session returned 401 for an existing username and 404 otherwise.

An issue was discovered in AvertX Auto focus Night Vision HD Indoor/Outdoor IP Dome Camera HD838 and Night Vision HD Indoor/Outdoor Mini IP Bullet Camera HD438. Failed web UI login attempts elicit different responses depending on whether a user account exists. Because the responses indicate whether a submitted username is valid or not, they make it easier to identify legitimate usernames. If a login request is sent to ISAPI/Security/sessionLogin/capabilities using a username that exists, it will return the value of the salt given to that username, even if the password is incorrect. However, if a login request is sent using a username that is not present in the database, it will return an empty salt value. This allows attackers to enumerate legitimate usernames, facilitating brute-force attacks. NOTE: this is different from CVE-2020-7057.

An issue was discovered in Aviatrix Controller before 5.4.1204. There is a Observable Response Discrepancy from the API, which makes it easier to perform user enumeration via brute force.

Allowing RTT frames to be linked with non randomized MAC address by comparing the sequence numbers can lead to information disclosure. in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking

Proxmox VE prior to 3.2: 'AccessControl.pm' User Enumeration Vulnerability

Pritunl 1.29.2145.25 allows attackers to enumerate valid VPN usernames via a series of /auth/session login attempts. Initially, the server will return error 401. However, if the username is valid, then after 20 login attempts, the server will start responding with error 400. Invalid usernames will receive error 401 indefinitely. Note: This has been disputed by the vendor as not a vulnerability. They argue that this is an intended design

A vulnerability has been identified in Desigo DXR2 (All versions < V01.21.142.5-22), Desigo PXC3 (All versions < V01.21.142.4-18), Desigo PXC4 (All versions < V02.20.142.10-10884), Desigo PXC5 (All versions < V02.20.142.10-10884). The login functionality of the application fails to normalize the response times of login attempts performed with wrong usernames with the ones executed with correct usernames. A remote unauthenticated attacker could exploit this side-channel information to perform a username enumeration attack and identify valid usernames.

Adenza AxiomSL ControllerView through 10.8.1 is vulnerable to user enumeration. An attacker can identify valid usernames on the platform because a failed login attempt produces a different error message when the username is valid.

A vulnerability in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to enumerate user accounts. This vulnerability is due to the improper handling of HTTP headers. An attacker could exploit this vulnerability by sending authenticated requests to an affected system. A successful exploit could allow the attacker to compare the HTTP responses that are returned by the affected system to determine which accounts are valid user accounts.

Umanni RH 1.0 has a user enumeration vulnerability. This issue occurs during password recovery, where a difference in messages could allow an attacker to determine if the user is valid or not, enabling a brute force attack with valid users.

Jenkins Configuration as Code Plugin 1.55 and earlier used a non-constant time comparison function when validating an authentication token allowing attackers to use statistical methods to obtain a valid authentication token.

ECDSA/EC/Point.pm in Crypt::Perl before 0.33 does not properly consider timing attacks against the EC point multiplication algorithm.

In the Voatz application 2020-01-01 for Android, the amount of data transmitted during a single voter's vote depends on the different lengths of the metadata across the available voting choices, which makes it easier for remote attackers to discover this voter's choice by sniffing the network. For example, a small amount of sniffed data may indicate that a vote was cast for the candidate with the least metadata. An active man-in-the-middle attacker can leverage this behavior to disrupt voters' abilities to vote for a candidate opposed by the attacker.

CMAC verification functionality in Microchip Atmel ATSAMA5 products is vulnerable to vulnerable to timing and power analysis attacks.

wolfSSL 4.3.0 has mulmod code in wc_ecc_mulmod_ex in ecc.c that does not properly resist timing side-channel attacks.

The private-key operations in ecc.c in wolfSSL before 4.4.0 do not use a constant-time modular inverse when mapping to affine coordinates, aka a "projective coordinates leak."

In Legion of the Bouncy Castle BC before 1.61 and BC-FJA before 1.0.1.2, attackers can obtain sensitive information about a private exponent because of Observable Differences in Behavior to Error Inputs. This occurs in org.bouncycastle.crypto.encodings.OAEPEncoding. Sending invalid ciphertext that decrypts to a short payload in the OAEP Decoder could result in the throwing of an early exception, potentially leaking some information about the private exponent of the RSA private key performing the encryption.

Citrix ShareFile before 19.12 allows User Enumeration. It is possible to enumerate application username based on different server responses using the request to check the otp code. No authentication is required.

In BIG-IP 15.0.0, 14.1.0-14.1.0.6, 14.0.0-14.0.0.5, 13.0.0-13.1.1.5, 12.1.0-12.1.4.1, 11.5.1-11.6.4, BIG-IQ 7.0.0, 6.0.0-6.1.0,5.2.0-5.4.0, iWorkflow 2.3.0, and Enterprise Manager 3.1.1, the Configuration utility login page may not follow best security practices when handling a malicious request.