Lib/zipfile.py in Python through 3.7.2 allows remote attackers to cause a denial of service (resource consumption) via a ZIP bomb.

qpid-cpp: ACL policies only loaded if the acl-file option specified enabling DoS by consuming all available file descriptors

A vulnerability has been identified in SINAMICS PERFECT HARMONY GH180 with NXG I control, MLFBs: 6SR2...-, 6SR3...-, 6SR4...- (All Versions with option G28), SINAMICS PERFECT HARMONY GH180 with NXG II control, MLFBs: 6SR2...-, 6SR3...-, 6SR4...- (All Versions with option G28). A denial of service vulnerability exists in the affected products. The vulnerability could be exploited by an attacker with network access to the device. Successful exploitation requires no privileges and no user interaction. An attacker could use the vulnerability to compromise availability of the affected system. At the time of advisory publication no public exploitation of this security vulnerability was known.

SPARQL Injection in VIVO Vitro v1.10.0 allows a remote attacker to execute arbitrary SPARQL via the uri parameter, leading to a regular expression denial of service (ReDoS), as demonstrated by crafted use of FILTER%20regex in a /individual?uri= request.

Mitsubishi Electric Q03/04/06/13/26UDVCPU: serial number 20081 and prior, Q04/06/13/26UDPVCPU: serial number 20081 and prior, and Q03UDECPU, Q04/06/10/13/20/26/50/100UDEHCPU: serial number 20101 and prior. A remote attacker can send specific bytes over Port 5007 that will result in an Ethernet stack crash and disruption to USB communication.

With pipelining enabled each incoming query on a TCP connection requires a similar resource allocation to a query received via UDP or via TCP without pipelining enabled. A client using a TCP-pipelined connection to a server could consume more resources than the server has been provisioned to handle. When a TCP connection with a large number of pipelined queries is closed, the load on the server releasing these multiple resources can cause it to become unresponsive, even for queries that can be answered authoritatively or from cache. (This is most likely to be perceived as an intermittent server problem).

On BIG-IP 14.1.0-14.1.2, 14.0.0-14.0.1, and 13.1.0-13.1.1, undisclosed HTTP requests may consume excessive amounts of systems resources which may lead to a denial of service.

A vulnerability, which was classified as problematic, has been found in Tongda OA 2017 up to 11.7. This issue affects some unknown processing of the file /inc/package_static_resources.php. The manipulation leads to resource consumption. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

The WBM web application on firmwares prior to 03.02.02 and 03.01.07 on the WAGO PFC100 and PFC2000, respectively, runs on a lighttpd web server and makes use of the FastCGI module, which is intended to provide high performance for all Internet applications without the penalties of Web server APIs. However, the default configuration of this module appears to limit the number of concurrent php-cgi processes to two, which can be abused to cause a denial of service of the entire web server. This affects WAGO PFC200 Firmware version 03.00.39(12) and version 03.01.07(13), and WAGO PFC100 Firmware version 03.00.39(12) and version 03.02.02(14).

The Googlemaps plugin before 3.1 for Joomla! allows remote attackers to cause a denial of service via the url parameter to plugin_googlemap2_proxy.php.

An issue in the Proxygen handling of HTTP2 parsing of headers/trailers can lead to a denial-of-service attack. This affects Proxygen prior to v2018.12.31.00.

IBM WebSphere Application Server 7.0, 8.0, 8.5, and 9.0 is vulnerable to a denial of service, caused by improper handling of request headers. A remote attacker could exploit this vulnerability to cause the consumption of Memory. IBM X-Force ID: 156242.

A potential denial-of-service issue in the Proxygen handling of invalid HTTP2 priority settings (specifically a circular dependency). This affects Proxygen prior to v2018.12.31.00.

A flaw was found in StarWind iSCSI target. An attacker could script standard iSCSI Initiator operation(s) to exhaust the StarWind service socket, which could lead to denial of service. This affects iSCSI SAN (Windows Native) Version 3.2.2 build 2007-02-20.

An issue was discovered in GitLab Community Edition (CE) and Enterprise Edition (EE) 11.0 through 12.6. It allows Uncontrolled Resource Consumption.

libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned about a server's certificate chain.Due to an erroneous function, a malicious server could make libcurl built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.

On F5 BIG-IP APM 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, when APM is configured on a virtual server and the associated access profile is configured with APM AAA NTLM Auth, undisclosed requests can cause an increase in internal resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

OPC UA .NET Standard Stack 1.04.368 allows a remote attacker to cause a server to crash via a large number of messages that trigger Uncontrolled Resource Consumption.

The Schneider Electric M340 PLC modules allow remote attackers to cause a denial of service (resource consumption) via unspecified vectors. NOTE: the vendor reportedly disputes this issue because it "could not be duplicated" and "an attacker could not remotely exploit this observed behavior to deny PLC control functions.

Pexip Infinity before 27.3 allows remote attackers to trigger excessive resource consumption via H.264.

A Uncontrolled Resource Consumption vulnerability in rmt of SUSE Linux Enterprise High Performance Computing 15-ESPOS, SUSE Linux Enterprise High Performance Computing 15-LTSS, SUSE Linux Enterprise Module for Public Cloud 15-SP1, SUSE Linux Enterprise Module for Server Applications 15, SUSE Linux Enterprise Module for Server Applications 15-SP1, SUSE Linux Enterprise Server 15-LTSS, SUSE Linux Enterprise Server for SAP 15; openSUSE Leap 15.1 allows remote attackers to cause DoS against rmt by requesting migrations. This issue affects: SUSE Linux Enterprise High Performance Computing 15-ESPOS rmt-server versions prior to 2.5.2-3.26.1. SUSE Linux Enterprise High Performance Computing 15-LTSS rmt-server versions prior to 2.5.2-3.26.1. SUSE Linux Enterprise Module for Public Cloud 15-SP1 rmt-server versions prior to 2.5.2-3.9.1. SUSE Linux Enterprise Module for Server Applications 15 rmt-server versions prior to 2.5.2-3.26.1. SUSE Linux Enterprise Module for Server Applications 15-SP1 rmt-server versions prior to 2.5.2-3.9.1. SUSE Linux Enterprise Server 15-LTSS rmt-server versions prior to 2.5.2-3.26.1. SUSE Linux Enterprise Server for SAP 15 rmt-server versions prior to 2.5.2-3.26.1. openSUSE Leap 15.1 rmt-server versions prior to 2.5.2-lp151.2.9.1.

A vulnerability has been identified in SCALANCE X200-4P IRT, SCALANCE X201-3P IRT, SCALANCE X201-3P IRT PRO, SCALANCE X202-2IRT, SCALANCE X202-2P IRT, SCALANCE X202-2P IRT PRO, SCALANCE X204-2, SCALANCE X204-2FM, SCALANCE X204-2LD, SCALANCE X204-2LD TS, SCALANCE X204-2TS, SCALANCE X204IRT, SCALANCE X204IRT PRO, SCALANCE X206-1, SCALANCE X206-1LD, SCALANCE X208, SCALANCE X208PRO, SCALANCE X212-2, SCALANCE X212-2LD, SCALANCE X216, SCALANCE X224, SCALANCE X302-7 EEC (230V, coated), SCALANCE X302-7 EEC (230V), SCALANCE X302-7 EEC (24V, coated), SCALANCE X302-7 EEC (24V), SCALANCE X302-7 EEC (2x 230V, coated), SCALANCE X302-7 EEC (2x 230V), SCALANCE X302-7 EEC (2x 24V, coated), SCALANCE X302-7 EEC (2x 24V), SCALANCE X304-2FE, SCALANCE X306-1LD FE, SCALANCE X307-2 EEC (230V, coated), SCALANCE X307-2 EEC (230V), SCALANCE X307-2 EEC (24V, coated), SCALANCE X307-2 EEC (24V), SCALANCE X307-2 EEC (2x 230V, coated), SCALANCE X307-2 EEC (2x 230V), SCALANCE X307-2 EEC (2x 24V, coated), SCALANCE X307-2 EEC (2x 24V), SCALANCE X307-3, SCALANCE X307-3, SCALANCE X307-3LD, SCALANCE X307-3LD, SCALANCE X308-2, SCALANCE X308-2, SCALANCE X308-2LD, SCALANCE X308-2LD, SCALANCE X308-2LH, SCALANCE X308-2LH, SCALANCE X308-2LH+, SCALANCE X308-2LH+, SCALANCE X308-2M, SCALANCE X308-2M, SCALANCE X308-2M PoE, SCALANCE X308-2M PoE, SCALANCE X308-2M TS, SCALANCE X308-2M TS, SCALANCE X310, SCALANCE X310, SCALANCE X310FE, SCALANCE X310FE, SCALANCE X320-1 FE, SCALANCE X320-1-2LD FE, SCALANCE X408-2, SCALANCE XF201-3P IRT, SCALANCE XF202-2P IRT, SCALANCE XF204, SCALANCE XF204-2, SCALANCE XF204-2BA IRT, SCALANCE XF204IRT, SCALANCE XF206-1, SCALANCE XF208, SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M TS (24V), SCALANCE XR324-12M TS (24V), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M PoE (230V, ports on front), SCALANCE XR324-4M PoE (230V, ports on rear), SCALANCE XR324-4M PoE (24V, ports on front), SCALANCE XR324-4M PoE (24V, ports on rear), SCALANCE XR324-4M PoE TS (24V, ports on front), SIMATIC CP 343-1 Advanced, SIMATIC CP 442-1 RNA, SIMATIC CP 443-1, SIMATIC CP 443-1, SIMATIC CP 443-1 Advanced, SIMATIC CP 443-1 RNA, SIMATIC RF180C, SIMATIC RF182C, SIPLUS NET CP 343-1 Advanced, SIPLUS NET CP 443-1, SIPLUS NET CP 443-1 Advanced, SIPLUS NET SCALANCE X308-2. The VxWorks-based Profinet TCP Stack can be forced to make very expensive calls for every incoming packet which can lead to a denial of service.

A flaw was found in Undertow when using Remoting as shipped in Red Hat Jboss EAP before version 7.2.4. A memory leak in HttpOpenListener due to holding remote connections indefinitely may lead to denial of service. Versions before undertow 2.0.25.SP1 and jboss-remoting 5.0.14.SP1 are believed to be vulnerable.

An Uncontrolled Resource Consumption vulnerability in Fortinet FortiSwitch below 3.6.11, 6.0.6 and 6.2.2, FortiAnalyzer below 6.2.3, FortiManager below 6.2.3 and FortiAP-S/W2 below 6.2.2 may allow an attacker to cause admin webUI denial of service (DoS) via handling special crafted HTTP requests/responses in pieces slowly, as demonstrated by Slow HTTP DoS Attacks.

Multiple vulnerabilities in the Server Message Block (SMB) Protocol preprocessor detection engine for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, adjacent or remote attacker to cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in Hitachi Command Suite 7.x and 8.x before 8.7.0-00 allows an unauthenticated remote user to trigger a denial of service (DoS) condition because of Uncontrolled Resource Consumption.

A vulnerability in the interactions between the DHCP and TFTP features for Cisco Small Business 300 Series (Sx300) Managed Switches could allow an unauthenticated, remote attacker to cause the device to become low on system memory, which in turn could lead to an unexpected reload of the device and result in a denial of service (DoS) condition on an affected device. The vulnerability is due to a failure to free system memory when an unexpected DHCP request is received. An attacker could exploit this vulnerability by sending a crafted DHCP packet to the targeted device. A successful exploit could allow the attacker to cause an unexpected reload of the device.

Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer.

Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer.

An issue was discovered in the asn1_der crate before 0.6.2 for Rust. Attackers can trigger memory exhaustion by supplying a large value in a length field.

OpenStack Keystone: extremely long passwords can crash Keystone by exhausting stack space

A vulnerability in the UDP protocol implementation for Cisco IoT Field Network Director (IoT-FND) could allow an unauthenticated, remote attacker to exhaust system resources, resulting in a denial of service (DoS) condition. The vulnerability is due to improper resource management for UDP ingress packets. An attacker could exploit this vulnerability by sending a high rate of UDP packets to an affected system within a short period of time. A successful exploit could allow the attacker to exhaust available system resources, resulting in a DoS condition.

A vulnerability was found in the Undertow HTTP server in versions before 2.0.28.SP1 when listening on HTTPS. An attacker can target the HTTPS port to carry out a Denial Of Service (DOS) to make the service unavailable on SSL.

An issue was discovered in Foxit Reader and PhantomPDF before 9.2. It allows memory consumption via an ArrayBuffer(0xfffffffe) call.

JRuby before 1.6.5.1 computes hash values without restricting the ability to trigger hash collisions predictably, which allows context-dependent attackers to cause a denial of service (CPU consumption) via crafted input to an application that maintains a hash table.

A local file inclusion flaw was found in the way the phpLDAPadmin before 0.9.8 processed certain values of the "Accept-Language" HTTP header. A remote attacker could use this flaw to cause a denial of service via specially-crafted request.

Google Chrome before 17.0.963.46 allows remote attackers to cause a denial of service (application crash) via vectors that trigger a large amount of database usage.

An issue was discovered in Django 1.11.x before 1.11.23, 2.1.x before 2.1.11, and 2.2.x before 2.2.4. Due to the behaviour of the underlying HTMLParser, django.utils.html.strip_tags would be extremely slow to evaluate certain inputs containing large sequences of nested incomplete HTML entities.

An issue was discovered in Django 1.11.x before 1.11.23, 2.1.x before 2.1.11, and 2.2.x before 2.2.4. If django.utils.text.Truncator's chars() and words() methods were passed the html=True argument, they were extremely slow to evaluate certain inputs due to a catastrophic backtracking vulnerability in a regular expression. The chars() and words() methods are used to implement the truncatechars_html and truncatewords_html template filters, which were thus vulnerable.

A vulnerability has been identified in SIMATIC WinAC RTX (F) 2010 (All versions < SP3 Update 1). Affected versions of the software contain a vulnerability that could allow an unauthenticated attacker to trigger a denial-of-service condition. The vulnerability can be triggered if a large HTTP request is sent to the executing service. The security vulnerability could be exploited by an attacker with network access to the affected systems. Successful exploitation requires no system privileges and no user interaction. An attacker could use the vulnerability to compromise availability of the service provided by the software.

A vulnerability has been identified in SCALANCE S602 (All versions >= V3.0 and < V4.1), SCALANCE S612 (All versions >= V3.0 and < V4.1), SCALANCE S623 (All versions >= V3.0 and < V4.1), SCALANCE S627-2M (All versions >= V3.0 and < V4.1). Specially crafted packets sent to port 443/tcp of affected devices could cause a Denial-of-Service condition of the web server.

An issue was discovered in GitLab Community and Enterprise Edition before 12.0.3. One of the parsers used by Gilab CI was vulnerable to a resource exhaustion attack. It allows Uncontrolled Resource Consumption.

ClamAV versions prior to 0.101.3 are susceptible to a zip bomb vulnerability where an unauthenticated attacker can cause a denial of service condition by sending crafted messages to an affected system.

A vulnerability in the HTTP server code of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the HTTP server to crash. The vulnerability is due to a logical error in the logging mechanism. An attacker could exploit this vulnerability by generating a high amount of long-lived connections to the HTTP service on the device. A successful exploit could allow the attacker to cause the HTTP server to crash.

In Apache SpamAssassin before 3.4.3, a message can be crafted in a way to use excessive resources. Upgrading to SA 3.4.3 as soon as possible is the recommended fix but details will not be shared publicly.

The Security Team noticed that the termination condition of the for loop in the readExternal method is a controllable variable, which, if tampered with, may lead to CPU exhaustion. As a fix, we added an upper bound and termination condition in the read and write logic. We classify it as a "low-priority but useful improvement". SystemDS is a distributed system and needs to serialize/deserialize data but in many code paths (e.g., on Spark broadcast/shuffle or writing to sequence files) the byte stream is anyway protected by additional CRC fingerprints. In this particular case though, the number of decoders is upper-bounded by twice the number of columns, which means an attacker would need to modify two entries in the byte stream in a consistent manner. By adding these checks robustness was strictly improved with almost zero overhead. These code changes are available in versions higher than 2.2.1.

Affected devices improperly handle large amounts of specially crafted UDP packets. This could allow an unauthenticated remote attacker to trigger a denial of service condition.