Cisco TelePresence Manager 1.2.x through 1.6.x allows remote attackers to perform unspecified actions and consequently execute arbitrary code via a crafted request to the Java RMI interface, related to a "command injection vulnerability," aka Bug ID CSCtf97085.

The TFTP implementation on Cisco TelePresence endpoint devices with software 1.2.x through 1.5.x, 1.6.0, and 1.6.1 allows remote attackers to obtain sensitive information via a GET request, aka Bug ID CSCte43876.

A vulnerability in the Cisco Cluster Management Protocol (CMP) processing code in Cisco IOS and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a reload of an affected device or remotely execute code with elevated privileges. The Cluster Management Protocol utilizes Telnet internally as a signaling and command protocol between cluster members. The vulnerability is due to the combination of two factors: (1) the failure to restrict the use of CMP-specific Telnet options only to internal, local communications between cluster members and instead accept and process such options over any Telnet connection to an affected device; and (2) the incorrect processing of malformed CMP-specific Telnet options. An attacker could exploit this vulnerability by sending malformed CMP-specific Telnet options while establishing a Telnet session with an affected Cisco device configured to accept Telnet connections. An exploit could allow an attacker to execute arbitrary code and obtain full control of the device or cause a reload of the affected device. This affects Catalyst switches, Embedded Service 2020 switches, Enhanced Layer 2 EtherSwitch Service Module, Enhanced Layer 2/3 EtherSwitch Service Module, Gigabit Ethernet Switch Module (CGESM) for HP, IE Industrial Ethernet switches, ME 4924-10GE switch, RF Gateway 10, and SM-X Layer 2/3 EtherSwitch Service Module. Cisco Bug IDs: CSCvd48893.

Cisco Media Processing Software before 1.2 on Media Experience Engine (MXE) 5600 devices has a default root password, which makes it easier for context-dependent attackers to obtain access via (1) the local console, (2) an SSH session, or (3) a TELNET session, aka Bug ID CSCto77737.

Cisco Unified Wireless Network (UWN) Solution 7.x before 7.0.98.0 does not use an adequate message-digest algorithm for a self-signed certificate, which allows remote attackers to bypass intended access restrictions via vectors involving collisions, aka Bug ID CSCtd67660.

The administrative web interface on Cisco TelePresence Recording Server devices with software 1.6.x and Cisco TelePresence Multipoint Switch (CTMS) devices with software 1.0.x, 1.1.x, 1.5.x, and 1.6.x allows remote attackers to create or overwrite arbitrary files, and possibly execute arbitrary code, via a crafted request, aka Bug IDs CSCth85786 and CSCth61065.

The Java Servlet framework on Cisco TelePresence Multipoint Switch (CTMS) devices with software 1.0.x, 1.1.x, 1.5.x, and 1.6.x does not require administrative authentication for unspecified actions, which allows remote attackers to execute arbitrary code via a crafted request, aka Bug ID CSCtf01253.

Multiple unspecified vulnerabilities in the web server in Cisco Unified MeetingPlace 7 before 7.0(2.3) hotfix 5F, 6 before 6.0.639.3, and possibly 5 allow remote attackers to create (1) user or (2) administrator accounts via a crafted URL in a request to the internal interface, aka Bug IDs CSCtc59231 and CSCtd40661.

Cisco Modular Encoding Platform D9036 Software before 02.04.70 has hardcoded (1) root and (2) guest passwords, which makes it easier for remote attackers to obtain access via an SSH session, aka Bug ID CSCut88070.

SQL injection vulnerability in the web-based management interface on Cisco RV220W devices allows remote attackers to execute arbitrary SQL commands via a crafted header in an HTTP request, aka Bug ID CSCuv29574.

The Admin portal in Cisco Identity Services Engine (ISE) 1.1.x, 1.2.0 before patch 17, 1.2.1 before patch 8, 1.3 before patch 5, and 1.4 before patch 4 allows remote attackers to obtain administrative access via unspecified vectors, aka Bug ID CSCuw34253.

Cisco Wireless LAN Controller (WLC) devices with software 7.6.x, 8.0 before 8.0.121.0, and 8.1 before 8.1.131.0 allow remote attackers to change configuration settings via unspecified vectors, aka Bug ID CSCuw06153.

The password-change feature in Cisco Unified MeetingPlace Web Conferencing before 8.5(5) MR3 and 8.6 before 8.6(2) does not check the session ID or require entry of the current password, which allows remote attackers to reset arbitrary passwords via a crafted HTTP request, aka Bug ID CSCuu51839.

The management interface in Cisco TelePresence Video Communication Server (VCS) and Cisco Expressway before X7.2.4, X8 before X8.1.2, and X8.2 before X8.2.2 and Cisco TelePresence Conductor before X2.3.1 and XC2.4 before XC2.4.1 allows remote attackers to bypass authentication via crafted login parameters, aka Bug IDs CSCur02680 and CSCur05556.

Cisco UCS Central Software before 1.3(1a) allows remote attackers to execute arbitrary commands via a crafted HTTP request, aka Bug ID CSCut46961.

The RMI interface in Cisco Secure Access Control System (ACS) 5.x before 5.5 does not properly enforce authentication and authorization requirements, which allows remote attackers to obtain administrative access via a request to this interface, aka Bug ID CSCud75187.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or allow an authenticated, local attacker to gain escalated privileges on an affected system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient user input validation. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device using root-level privileges. Due to the nature of the vulnerability, only commands without parameters can be executed.

Multiple vulnerabilities in the web-based management interface of the Cisco Small Business RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an attacker to do the following: Execute arbitrary code Cause a denial of service (DoS) condition Execute arbitrary commands For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code as the root user on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code as the root user on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code as the root user on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code as the root user on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device.

Multiple vulnerabilities in Cisco IOS Software for Cisco 809 and 829 Industrial Integrated Services Routers (Industrial ISRs) and Cisco 1000 Series Connected Grid Routers (CGR1000) could allow an unauthenticated, remote attacker or an authenticated, local attacker to execute arbitrary code on an affected system or cause an affected system to crash and reload. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the web server for Cisco IP Phones could allow an unauthenticated, remote attacker to execute code with root privileges or cause a reload of an affected IP phone, resulting in a denial of service (DoS) condition. The vulnerability is due to a lack of proper input validation of HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web server of a targeted device. A successful exploit could allow the attacker to remotely execute code with root privileges or cause a reload of an affected IP phone, resulting in a DoS condition.

A vulnerability in the Cisco SD-WAN Solution could allow an authenticated, remote attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the request admin-tech command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the request admin-tech command in the CLI of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying operating system of an affected device and escalate their privileges to the root user. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69852, CSCvi69856.

A vulnerability in the implementation of Security Assertion Markup Language (SAML) 2.0 Single Sign-On (SSO) for Clientless SSL VPN (WebVPN) and AnyConnect Remote Access VPN in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to successfully establish a VPN session to an affected device. The vulnerability is due to improper credential management when using NT LAN Manager (NTLM) or basic authentication. An attacker could exploit this vulnerability by opening a VPN session to an affected device after another VPN user has successfully authenticated to the affected device via SAML SSO. A successful exploit could allow the attacker to connect to secured networks behind the affected device.

The IP Phone Personal Address Book (PAB) Synchronizer feature in Cisco Unified Communications Manager (aka CUCM, formerly CallManager) 4.1, 4.2 before 4.2(3)SR4b, 4.3 before 4.3(2)SR1b, 5.x before 5.1(3e), 6.x before 6.1(3), and 7.0 before 7.0(2) sends privileged directory-service account credentials to the client in cleartext, which allows remote attackers to modify the CUCM configuration and perform other privileged actions by intercepting these credentials, and then using them in requests unrelated to the intended synchronization task, as demonstrated by (1) DC Directory account credentials in CUCM 4.x and (2) TabSyncSysUser account credentials in CUCM 5.x through 7.x.

A vulnerability in the install function of Cisco Prime Collaboration Provisioning (PCP) could allow an unauthenticated, remote attacker to access the administrative web interface using a default hard-coded username and password that are used during install. The vulnerability is due to a hard-coded password that, in some cases, is not replaced with a unique password. A successful exploit could allow the attacker to access the administrative web interface with administrator-level privileges.

A vulnerability in the password recovery function of Cisco Prime Collaboration Provisioning (PCP) could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to insufficient validation of a password recovery request. An attacker could exploit this vulnerability by submitting a password recovery request and changing the password for any user on an affected system. An exploit could allow the attacker to gain administrative-level privileges on the affected system. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 11.6 and prior. Cisco Bug IDs: CSCvd07253.

A vulnerability in the password reset function of Cisco Prime Collaboration Provisioning (PCP) could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to insufficient validation of a password reset request. An attacker could exploit this vulnerability by submitting a password reset request and changing the password for any user on an affected system. An exploit could allow the attacker to gain administrative-level privileges on the affected system. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 11.6 and prior. Cisco Bug IDs: CSCvd07245.

A vulnerability in the assignment and management of default user accounts for Secure Shell (SSH) access to Cisco Aironet 1800, 2800, and 3800 Series Access Points that are running Cisco Mobility Express Software could allow an authenticated, remote attacker to gain elevated privileges on an affected access point. The vulnerability exists because the Cisco Mobility Express controller of the affected software configures the default SSH user account for an access point to be the first SSH user account that was created for the Mobility Express controller, if an administrator added user accounts directly to the controller instead of using the default configuration or the SSH username creation wizard. Although the user account has read-only privileges for the Mobility Express controller, the account could have administrative privileges for an associated access point. An attacker who has valid user credentials for an affected controller could exploit this vulnerability by using the default SSH user account to authenticate to an affected access point via SSH. A successful exploit could allow the attacker to log in to the affected access point with administrative privileges and perform arbitrary administrative actions. This vulnerability affects the following Cisco products: Aironet 1800 Series Access Points that are running Cisco Mobility Express Software Releases 8.2.121.0 through 8.5.105.0, Aironet 2800 Series Access Points that are running Cisco Mobility Express Software Releases 8.3.102.0 through 8.5.105.0, Aironet 3800 Series Access Points that are running Cisco Mobility Express Software Releases 8.3.102.0 through 8.5.105.0. Cisco Bug IDs: CSCva68116.

Unspecified vulnerability in the SSH server in (1) Cisco Service Control Engine (SCE) before 3.1.6, and (2) Icon Labs Iconfidant SSH before 2.3.8, allows remote attackers to cause a denial of service (device instability) via "SSH credentials that attempt to change the authentication method," aka Bug ID CSCsm14239.

The (1) TTLS CHAP, (2) TTLS MSCHAP, (3) TTLS MSCHAPv2, (4) TTLS PAP, (5) MD5, (6) GTC, (7) LEAP, (8) PEAP MSCHAPv2, (9) PEAP GTC, and (10) FAST authentication methods in Cisco Secure Services Client (CSSC) 4.x, Trust Agent 1.x and 2.x, Cisco Security Agent (CSA) 5.0 and 5.1 (when a vulnerable Trust Agent has been deployed), and the Meetinghouse AEGIS SecureConnect Client store transmitted authentication credentials in plaintext log files, which allows local users to obtain sensitive information by reading these files, aka CSCsg34423.

A vulnerability in the development shell (devshell) authentication for Cisco Aironet Series Access Points (APs) running the Cisco AP-COS operating system could allow an authenticated, local attacker to access the development shell without proper authentication, which allows for root access to the underlying Linux OS. The attacker would need valid device credentials. The vulnerability exists because the software improperly validates user-supplied input at the CLI authentication prompt for development shell access. An attacker could exploit this vulnerability by authenticating to the device and entering crafted input at the CLI. A successful exploit could allow the attacker to access the AP development shell without proper authentication, which allows for root access to the underlying Linux OS. Software versions prior to 8.3.150.0, 8.5.135.0, and 8.8.100.0 are affected.

A vulnerability in Cisco IOS XE SD-WAN Software could allow an unauthenticated, local attacker to gain unauthorized access to an affected device. The vulnerability is due to the existence of default credentials within the default configuration of an affected device. An attacker who has access to an affected device could log in with elevated privileges. A successful exploit could allow the attacker to take complete control of the device. This vulnerability affects Cisco devices that are running Cisco IOS XE SD-WAN Software releases 16.11 and earlier.

PXE Encryption in Cisco IronPort Encryption Appliance 6.2.4 before 6.2.4.1.1, 6.2.5, 6.2.6, 6.2.7 before 6.2.7.7, 6.3 before 6.3.0.4, and 6.5 before 6.5.0.2; and Cisco IronPort PostX 6.2.1 before 6.2.1.1 and 6.2.2 before 6.2.2.3; allows remote attackers to capture credentials by tricking a user into reading a modified or crafted e-mail message.

A vulnerability in the change password API of Cisco Connected Mobile Experiences (CMX) could allow an authenticated, remote attacker to alter their own password to a value that does not comply with the strong authentication requirements that are configured on an affected device. This vulnerability exists because a password policy check is incomplete at the time a password is changed at server side using the API. An attacker could exploit this vulnerability by sending a specially crafted API request to the affected device. A successful exploit could allow the attacker to change their own password to a value that does not comply with the configured strong authentication requirements.

Dell EMC Integrated System for Microsoft Azure Stack Hub, versions 1906 – 2011, contain an undocumented default iDRAC account. A remote unauthenticated attacker, with the knowledge of the default credentials, could potentially exploit this to log in to the system to gain root privileges.

Intellicom NetBiter WebSCADA devices use default passwords for the HICP network configuration service, which makes it easier for remote attackers to modify network settings and cause a denial of service. NOTE: this is only a vulnerability when the administrator does not follow recommendations in the product's installation documentation. NOTE: this issue was originally reported to be hard-coded passwords, not default passwords.

HP Operations Manager has a default password of OvW*busr1 for the ovwebusr account, which allows remote attackers to execute arbitrary code via a session that uses the manager role to conduct unrestricted file upload attacks against the /manager servlet in the Tomcat servlet container. NOTE: this might overlap CVE-2009-3099 and CVE-2009-3843.

The Internet Authentication Service (IAS) in Microsoft Windows 2000 SP4, XP SP2 and SP3, Server 2003 SP2, Vista Gold and SP1, and Server 2008 Gold does not properly verify the credentials in an MS-CHAP v2 Protected Extensible Authentication Protocol (PEAP) authentication request, which allows remote attackers to access network resources via a malformed request, aka "MS-CHAP Authentication Bypass Vulnerability."

The Huawei D100 has (1) a certain default administrator password for the web interface, and does not force a password change; and has (2) a default password of admin for the admin account in the telnet interface; which makes it easier for remote attackers to obtain access.

The Telnet service in Microsoft Windows 2000 SP4, XP SP2 and SP3, Server 2003 SP2, Vista Gold, SP1, and SP2, and Server 2008 Gold and SP2 allows remote Telnet servers to execute arbitrary code on a client machine by replaying the NTLM credentials of a client user, aka "Telnet Credential Reflection Vulnerability," a related issue to CVE-2000-0834.

The Axesstel MV 410R has a certain default administrator password, and does not force a password change, which makes it easier for remote attackers to obtain access.

Armorlogic Profense Web Application Firewall before 2.2.22, and 2.4.x before 2.4.4, has a default root password hash, and permits password-based root logins over SSH, which makes it easier for remote attackers to obtain access.

GE Fanuc iFIX 5.0 and earlier relies on client-side authentication involving a weakly encrypted local password file, which allows remote attackers to bypass intended access restrictions and start privileged server login sessions by recovering a password or by using a modified program module.

Aztech ADSL2/2+ 4-port router has a default "isp" account with a default "isp" password, which allows remote attackers to obtain access if this default is not changed.

HP Operations Dashboard has a default password of j2deployer for the j2deployer account, which allows remote attackers to execute arbitrary code via a session that uses the manager role to conduct unrestricted file upload attacks against the /manager servlet in the Tomcat servlet container. NOTE: this might overlap CVE-2009-3098.