An issue was discovered on NETGEAR WNR1000V4 1.1.0.54 devices. Multiple actions within the WNR1000V4 web management console are vulnerable to an unauthenticated GET request (exploitable directly or through CSRF), as demonstrated by the setup.cgi?todo=save_htp_account URI.

Certain NETGEAR devices are affected by CSRF. This affects D3600 before 1.0.0.72, D6000 before 1.0.0.72, EX3700 before 1.0.0.70, EX3800 before 1.0.0.70, EX6000 before 1.0.0.30, EX6100 before 1.0.2.24, EX6120 before 1.0.0.40, EX6130 before 1.0.0.22, EX6150v1 before 1.0.0.42, EX6200 before 1.0.3.88, EX7000 before 1.0.0.66, and WN2500RPv2 before 1.0.1.54.

Certain NETGEAR devices are affected by CSRF. This affects EX6100 before 1.0.2.16_1.1.130, EX6100v2 before 1.0.1.70, EX6150v2 before 1.0.1.54, EX6200v2 before 1.0.1.50, EX6400 before 1.0.1.60, EX7300 before 1.0.1.60, and WN3000RPv3 before 1.0.2.44.

Certain NETGEAR devices are affected by CSRF. This affects JR6150 before 1.0.1.10, R6050 before 1.0.1.10, R6250 before 1.0.4.12, R6300v2 before 1.0.4.8, R6700 before 1.0.1.16, R6900 before 1.0.1.16, R7300DST before 1.0.0.54, R7900 before 1.0.1.12, R8000 before 1.0.3.32, and R8500 before 1.0.2.74.

The Voo branded NETGEAR CG3700b custom firmware V2.02.03 allows CSRF against all /goform/ URIs. An attacker can modify all settings including WEP/WPA/WPA2 keys, restore the router to factory settings, or even upload an entire malicious configuration file.

Certain NETGEAR devices are affected by CSRF. This affects GS716Tv3 before 6.3.1.36 and GS724Tv4 before 6.3.1.36.

The CSRF protection mechanism implemented in the web administration panel on NETGEAR JGS516PE/GS116Ev2 v2.6.0.43 devices could be bypassed by omitting the CSRF token parameter in HTTP requests.

Certain NETGEAR devices are affected by CSRF. This affects D6200 before 1.1.00.38, D7000 before 1.0.1.78, JR6150 before 1.0.1.24, R6020 before 1.0.0.42, R6050 before 1.0.1.24, R6080 before 1.0.0.42, R6120 before 1.0.0.66, R6220 before 1.1.0.100, R6260 before 1.1.0.64, R6700v2 before 1.2.0.62, R6800 before 1.2.0.62, R6900v2 before 1.2.0.62, R7450 before 1.2.0.62, and WNR2020 before 1.1.0.62.

Cross-site request forgery (CSRF) vulnerability in frontview/lib/np_handler.pl in NETGEAR ReadyNAS RAIDiator before 4.1.12 and 4.2.x before 4.2.24 allows remote attackers to hijack the authentication of users.

Certain NETGEAR devices are affected by CSRF. This affects RBK752 before 3.2.15.25, RBK753 before 3.2.15.25, RBK753S before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK842 before 3.2.15.25, RBR840 before 3.2.15.25, RBS840 before 3.2.15.25, RBK852 before 3.2.15.25, RBK853 before 3.2.15.25, RBR850 before 3.2.15.25, and RBS850 before 3.2.15.25.

NETGEAR ReadyNAS devices before 6.9.3 are affected by CSRF.

NETGEAR ReadyNAS devices before 6.9.3 are affected by CSRF.

Cross-site request forgery (CSRF) vulnerability in NETGEAR DGN2200 routers with firmware 10.0.0.20 through 10.0.0.50 allows remote attackers to hijack the authentication of users for requests that perform DNS lookups via the host_name parameter to dnslookup.cgi. NOTE: this issue can be combined with CVE-2017-6334 to execute arbitrary code remotely.

Certain NETGEAR devices are affected by CSRF. This affects R8300 before 1.0.2.94 and R8500 before 1.0.2.94.

Certain NETGEAR devices are affected by CSRF. This affects R6300v2 before 1.0.4.8, R6400v2 before 1.0.2.32, R6700 before 1.0.1.22, R6900 before 1.0.1.22, R7000P before 1.0.0.86, R6900P before 1.0.0.56, R7300 before 1.0.0.54, R8300 before 1.0.2.106, R8500 before 1.0.2.106, DGN2200v4 before 1.0.0.86, DGND2200Bv4 before 1.0.0.86, R6050 before 1.0.0.86, JR6150 before 1.0.1.10, R6220 before 1.1.0.50, and WNDR3700v5 before V1.1.0.48.

Certain NETGEAR devices are affected by CSRF. This affects D6200 before 1.1.00.24, D7000 before 1.0.1.52, JNR1010v2 before 1.1.0.44, JWNR2010v5 before 1.1.0.44, JR6150 before 1.0.1.12, PR2000 before 1.0.0.20, R6020 before 1.0.0.26, R6050 before 1.0.1.12, R6080 before 1.0.0.26, R6120 before 1.0.0.36, R6220 before 1.1.0.60, R6700v2 before 1.2.0.12, R6800 before 1.2.0.12, R6900v2 before 1.2.0.12, WNDR3700v5 before 1.1.0.50, WNR1000v4 before 1.1.0.44, WNR2020 before 1.1.0.44, and WNR2050 before 1.1.0.44.

Certain NETGEAR devices are affected by CSRF. This affects D1500 before 1.0.0.25, D500 before 1.0.0.25, D6100 before 1.0.0.55, D7000 before 1.0.1.50, D7800 before 1.0.1.28, EX6100v2 before 1.0.1.60, EX6150v2 before 1.0.1.60, JNR1010v2 before 1.1.0.46, JR6150 before 1.0.1.16, JWNR2010v5 before 1.1.0.46, PR2000 before 1.0.0.18, R6020 before 1.0.0.26, R6050 before 1.0.1.16, R6080 before 1.0.0.26, R6100 before 1.0.1.20, R6220 before 1.1.0.60, R7500 before 1.0.0.118, R7500v2 before 1.0.3.20, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WN3000RPv3 before 1.0.2.50, WN3100RPv2 before 1.0.0.40, WNDR3700v5 before 1.1.0.48, WNDR4300v2 before 1.0.0.48, WNDR4500v3 before 1.0.0.48, WNR1000v4 before 1.1.0.46, WNR2000v5 before 1.0.0.62, WNR2020 before 1.1.0.46, and WNR2050 before 1.1.0.46.

Certain NETGEAR devices are affected by CSRF. This affects R6100 before 1.0.1.12, R7500 before 1.0.0.108, WNDR3700v4 before 1.0.2.86, WNDR4300v1 before 1.0.2.88, WNDR4300v2 before 1.0.0.48, WNDR4500v3 before 1.0.0.48, and WNR2000v5 before 1.0.0.42.

Certain NETGEAR devices are affected by CSRF. This affects JNR1010v2 before 1.1.0.44, JR6150 before 1.0.1.10, JWNR2010v5 before 1.1.0.44, R6050 before 1.0.1.10, R6100 before 1.0.1.16, R6220 before 1.1.0.50, R7500 before 1.0.0.112, R7500v2 before 1.0.3.20, R7800 before 1.0.2.36, R9000 before 1.0.2.40, WNDR3700v4 before 1.0.2.88, WNDR3700v5 before 1.1.0.48, WNDR4300 before 1.0.2.90, WNDR4300v2 before 1.0.0.48, WNDR4500v3 before 1.0.0.48, WNR1000v4 before 1.1.0.44, WNR2000v5 before 1.0.0.58, WNR2020 before 1.1.0.44, and WNR2050 before 1.1.0.44.

Certain NETGEAR devices are affected by CSRF. This affects R6050/JR6150 before 1.0.1.7, PR2000 before 1.0.0.17, R6220 before 1.1.0.50, WNDR3700v5 before 1.1.0.48, JNR1010v2 before 1.1.0.40, JWNR2010v5 before 1.1.0.40, WNR1000v4 before 1.1.0.40, WNR2020 before 1.1.0.40, WNR2050 before 1.1.0.40, WNR614 before 1.1.0.40, WNR618 before 1.1.0.40, and D7000 before 1.0.1.50.

Certain NETGEAR devices are affected by CSRF. This affects D6200 before 1.1.00.24, D7000 before 1.0.1.52, JR6150 before 1.0.1.12, JNR1010v2 before 1.1.0.44, JWNR2010v5 before 1.1.0.44, PR2000 before 1.0.0.20, R6020 before 1.0.0.26, R6050 before 1.0.1.12, R6080 before 1.0.0.26, R6120 before 1.0.0.36, R6220 before 1.1.0.60, R6700v2 before 1.2.0.12, R6800 before 1.2.0.12, R6900v2 before 1.2.0.12, WNDR3700v5 before 1.1.0.50, WNR1000v4 before 1.1.0.44, WNR2020 before 1.1.0.44, and WNR2050 before 1.1.0.44.

Certain NETGEAR devices are affected by CSRF. This affects R7300 before 1.0.0.54, R8500 before 1.0.2.94, DGN2200v1 before 1.0.0.55, and D2200D/D2200DW-1FRNAS before 1.0.0.32.

Certain NETGEAR devices are affected by CSRF. This affects R6300v2 before 1.0.0.36, AC1450 before 1.0.0.36, R7300 before 1.0.0.54, and R8500 before 1.0.2.94.

Certain NETGEAR devices are affected by CSRF and authentication bypass. This affects R7300DST before 1.0.0.54, R8300 before 1.0.2.100_1.0.82, R8500 before 1.0.2.100_1.0.82, and WNDR3400v3 before 1.0.1.14.

Certain NETGEAR devices are affected by mishandling of repeated URL calls. This affects JNR1010v2 before 2017-01-06, WNR614 before 2017-01-06, WNR618 before 2017-01-06, JWNR2000v5 before 2017-01-06, WNR2020 before 2017-01-06, JWNR2010v5 before 2017-01-06, WNR1000v4 before 2017-01-06, WNR2020v2 before 2017-01-06, R6220 before 2017-01-06, and WNDR3700v5 before 2017-01-06.

An issue was discovered on NETGEAR WNR1000V4 1.1.0.54 devices. The web management interface (setup.cgi) has an authentication bypass and other problems that ultimately allow an attacker to remotely compromise the device from a malicious webpage. The attacker sends an FW_remote.htm&todo=cfg_init request without a cookie, reads the Set-Cookie header in the 401 Unauthorized response, and then repeats the FW_remote.htm&todo=cfg_init request with the specified cookie.

Certain NETGEAR devices allow remote attackers to disable all authentication requirements by visiting genieDisableLanChanged.cgi. The attacker can then, for example, visit MNU_accessPassword_recovered.html to obtain a valid new admin password. This affects AC1450, D8500, DC112A, JNDR3000, LG2200D, R4500, R6200, R6200V2, R6250, R6300, R6300v2, R6400, R6700, R6900P, R6900, R7000P, R7000, R7100LG, R7300, R7900, R8000, R8300, R8500, WGR614v10, WN2500RPv2, WNDR3400v2, WNDR3700v3, WNDR4000, WNDR4500, WNDR4500v2, WNR1000, WNR1000v3, WNR3500L, and WNR3500L.

NETGEAR ProSAFE Network Management System MyHandlerInterceptor Authentication Bypass Vulnerability. This vulnerability allows remote attackers to bypass authentication on affected installations of NETGEAR ProSAFE Network Management System. Authentication is not required to exploit this vulnerability. The specific flaw exists within the MyHandlerInterceptor class. The issue results from improper implementation of the authentication mechanism. An attacker can leverage this vulnerability to bypass authentication on the system. . Was ZDI-CAN-19718.

This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of multiple NETGEAR routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the mini_httpd service, which listens on TCP port 80 by default. The issue results from incorrect string matching logic when accessing protected pages. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of root. Was ZDI-CAN-13313.

This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of NETGEAR R7000 1.0.11.116_10.2.100 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the processing of SOAP requests. The issue results from the lack of proper authentication verification before performing a password reset. An attacker can leverage this vulnerability to reset the admin password. Was ZDI-CAN-13483.

An Authentication Bypass vulnerability exists in NETGEAR Centria WNDR4700 Firmware 1.0.0.34 in http://<router_ip>/apply.cgi?/hdd_usr_setup.htm that when visited by any user, authenticated or not, causes the router to no longer require a password to access the web administration portal.

Netgear WNR1000v3 with firmware before 1.0.2.60 contains an Authentication Bypass via the NtgrBak key.

An Authentication vulnerability exists in NETGEAR WGR614 v7 and v9 due to a hardcoded credential used for serial programming, a related issue to CVE-2006-1002.

Netgear WNR1000v3 with firmware before 1.0.2.60 contains an Authentication Bypass due to the server skipping checks for URLs containing a ".jpg".

A vulnerability in the Netgear DGN2200 router with firmware version v1.0.0.46 and earlier permits unauthorized individuals to bypass the authentication. When adding "?x=1.gif" to the the requested url, it will be recognized as passing the authentication.

An authentication bypass vulnerability in NETGEAR Orbi devices allows users connected to the local network to access the router web interface as an admin.

An insufficient authentication vulnerability in NETGEAR WiFi range extenders allows a network adjacent attacker with WiFi authentication or a physical Ethernet port connection to bypass the authentication process and access the admin panel.

A path traversal vulnerability in NETGEAR WiFi range extenders allows an attacker with LAN authentication to access the router's IP and review the contents of the dynamically generated webproc file, which records the username and password submitted to the router GUI.

Netgear Nighthawk R6700 version 1.0.4.120 does not have sufficient protections for the UART console. A malicious actor with physical access to the device is able to connect to the UART port via a serial connection and execute commands as the root user without authentication.

Certain NETGEAR devices are affected by authentication bypass. This affects GS810EMX before 1.0.0.5, XS512EM before 1.0.0.6, and XS724EM before 1.0.0.6.

This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of NETGEAR R6020, R6080, R6120, R6220, R6260, R6700v2, R6800, R6900v2, R7450, JNR3210, WNR2020, Nighthawk AC2100, and Nighthawk AC2400 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the mini_httpd service, which listens on TCP port 80 by default. The issue results from incorrect string matching logic when accessing protected pages. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of root. Was ZDI-CAN-11355.

Certain NETGEAR devices are affected by authentication bypass. This affects GS110EMX before 1.0.1.7, GS810EMX before 1.7.1.3, XS512EM before 1.0.1.3, and XS724EM before 1.0.1.3.

NETGEAR Centria WNDR4700 devices with firmware 1.0.0.34 allow authentication bypass.

An issue was discovered on NETGEAR Orbi Tri-Band Business WiFi Add-on Satellite (SRS60) AC3000 V2.5.1.106, Outdoor Satellite (RBS50Y) V2.5.1.106, and Pro Tri-Band Business WiFi Router (SRR60) AC3000 V2.5.1.106. The administrative SOAP interface allows an unauthenticated remote write of arbitrary Wi-Fi configuration data such as authentication details (e.g., the Web-admin password), network settings, DNS settings, system administration interface configuration, etc.

Certain NETGEAR devices are affected by authentication bypass. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.

NETGEAR WAC510 devices before 5.0.0.17 are affected by authentication bypass.

NETGEAR XR500 devices before 2.3.2.32 are affected by authentication bypass.