An exploitable firmware modification vulnerability was discovered on the Netgear XWN5001 Powerline 500 WiFi Access Point. An attacker can conduct a MITM (Man-in-the-Middle) attack to modify the user-uploaded firmware image and bypass the CRC check, allowing attackers to execute arbitrary code or cause a Denial of Service (DoS). This affects v0.4.1.1 and earlier.
An exploitable firmware modification vulnerability was discovered on the Netgear WNR2000v1 router. An attacker can conduct a MITM (Man-in-the-Middle) attack to modify the user-uploaded firmware image and bypass the CRC check, allowing attackers to execute arbitrary code or cause a Denial of Service (DoS). This affects v1.2.3.7 and earlier.
An issue was discovered on NETGEAR R8500, R8300, R7000, R6400, R7300, R7100LG, R6300v2, WNDR3400v3, WNR3500Lv2, R6250, R6700, R6900, and R8000 devices. They are prone to password disclosure via simple crafted requests to the web management server. The bug is exploitable remotely if the remote management option is set, and can also be exploited given access to the router over LAN or WLAN. When trying to access the web panel, a user is asked to authenticate; if the authentication is canceled and password recovery is not enabled, the user is redirected to a page that exposes a password recovery token. If a user supplies the correct token to the page /passwordrecovered.cgi?id=TOKEN (and password recovery is not enabled), they will receive the admin password for the router. If password recovery is set the exploit will fail, as it will ask the user for the recovery questions that were previously set when enabling that feature. This is persistent (even after disabling the recovery option, the exploit will fail) because the router will ask for the security questions.
NETGEAR WNR3500U and WNR3500L routers uses form tokens abased solely on router's current date and time, which allows attackers to guess the CSRF tokens.
NETGEAR D3600 devices with firmware 1.0.0.49 and D6000 devices with firmware 1.0.0.49 and earlier use the same hardcoded private key across different customers' installations, which allows remote attackers to defeat cryptographic protection mechanisms by leveraging knowledge of this key from another installation.
The password-recovery feature on NETGEAR D3600 devices with firmware 1.0.0.49 and D6000 devices with firmware 1.0.0.49 and earlier allows remote attackers to discover the cleartext administrator password by reading the cgi-bin/passrec.asp HTML source code.
The update process of the Circle Parental Control Service on various NETGEAR routers allows remote attackers to achieve remote code execution as root via a MitM attack. While the parental controls themselves are not enabled by default on the routers, the Circle update daemon, circled, is enabled by default. This daemon connects to Circle and NETGEAR to obtain version information and updates to the circled daemon and its filtering database. However, database updates from NETGEAR are unsigned and downloaded via cleartext HTTP. As such, an attacker with the ability to perform a MitM attack on the device can respond to circled update requests with a crafted, compressed database file, the extraction of which gives the attacker the ability to overwrite executable files with attacker-controlled code. This affects R6400v2 1.0.4.106, R6700 1.0.2.16, R6700v3 1.0.4.106, R6900 1.0.2.16, R6900P 1.3.2.134, R7000 1.0.11.123, R7000P 1.3.2.134, R7850 1.0.5.68, R7900 1.0.4.38, R8000 1.0.4.68, and RS400 1.5.0.68.
Netgear Nighthawk R6700 version 1.0.4.120 does not have sufficient protections for the UART console. A malicious actor with physical access to the device is able to connect to the UART port via a serial connection and execute commands as the root user without authentication.
Netgear RAX43 version 1.0.3.96 does not have sufficient protections to the UART interface. A malicious actor with physical access to the device is able to connect to the UART port via a serial connection, login with default credentials, and execute commands as the root user. These default credentials are admin:admin.
A support user exists on the device and appears to be a backdoor for Technical Support staff. The default password for this account is “support” and cannot be changed by a user via any normally accessible means.
NETGEAR DGN2200v1 devices before v1.0.0.60 mishandle HTTPd authentication (aka PSV-2020-0363, PSV-2020-0364, and PSV-2020-0365).
Certain NETGEAR devices are affected by authentication bypass. This affects R6300v2 before 1.0.4.8, R6400 before 1.0.1.20, R6700 before 1.0.1.20, R6900 before 1.0.1.20, R7000 before 1.0.7.10, R7100LG before V1.0.0.32, R7300DST before 1.0.0.52, R7900 before 1.0.1.16, R8000 before 1.0.3.36, R8300 before 1.0.2.94, R8500 before 1.0.2.94, WNDR3400v3 before 1.0.1.12, and WNR3500Lv2 before 1.2.0.40.
Certain NETGEAR devices are affected by authentication bypass. This affects R6300v2 before 1.0.4.8, PLW1000v2 before 1.0.0.14, and PLW1010v2 before 1.0.0.14.
Certain NETGEAR devices are affected by authentication bypass. This affects D6220 before 1.0.0.26, D6400 before 1.0.0.60, D8500 before 1.0.3.29, R6250 before 1.0.4.12, R6400 before 1.01.24, R6400v2 before 1.0.2.30, R6700 before 1.0.1.22, R6900 before 1.0.1.22, R6900P before 1.0.0.56, R7000 before 1.0.9.4, R7000P before 1.0.0.56, R7100LG before 1.0.0.32, R7300DST before 1.0.0.54, R7900 before 1.0.1.18, R8000 before 1.0.3.44, R8300 before 1.0.2.100_1.0.82, and R8500 before 1.0.2.100_1.0.82.
Certain NETGEAR devices are affected by authentication bypass. This affects JGS516PE before 2017-05-11, JGS524Ev2 before 2017-05-11, JGS524PE before 2017-05-11, GS105Ev2 before 2017-05-11, GS105PE before 2017-05-11, GS108Ev3 before 2017-05-11, GS108PEv3 before 2017-05-11, GS116Ev2 before 2017-05-11, GSS108E before 2017-05-11, GSS116E before 2017-05-11, XS708Ev2 before 2017-05-11, and XS716E before 2017-05-11.
Certain NETGEAR devices are affected by authentication bypass. This affects D6200 before 1.1.00.24, R6700v2 before 1.1.0.42, R6800 before 1.1.0.42, and R6900v2 before 1.1.0.42.
A vulnerability was found in Netgear WNR614 1.1.0.28_1.0.1WW. It has been classified as critical. This affects an unknown part of the component URL Handler. The manipulation with the input %00currentsetting.htm leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This issue appears to have been circulating as an 0day since 2024.
NETGEAR Centria WNDR4700 devices with firmware 1.0.0.34 allow authentication bypass.
An Authentication Bypass vulnerability exists in NETGEAR Centria WNDR4700 Firmware 1.0.0.34 in http://<router_ip>/apply.cgi?/hdd_usr_setup.htm that when visited by any user, authenticated or not, causes the router to no longer require a password to access the web administration portal.
The NSDP protocol implementation on NETGEAR JGS516PE/GS116Ev2 v2.6.0.43 devices was affected by an authentication issue that allows an attacker to bypass access controls and obtain full control of the device.
Netgear WNR1000v3 with firmware before 1.0.2.60 contains an Authentication Bypass via the NtgrBak key.
A vulnerability, which was classified as very critical, was found in Netgear DGND3700 1.1.00.15_1.00.15NA. This affects an unknown part of the file /BRS_top.html of the component Basic Authentication. The manipulation leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. Other products might be affected as well. The vendor was contacted early about this disclosure.
This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of NETGEAR R6020, R6080, R6120, R6220, R6260, R6700v2, R6800, R6900v2, R7450, JNR3210, WNR2020, Nighthawk AC2100, and Nighthawk AC2400 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the mini_httpd service, which listens on TCP port 80 by default. The issue results from incorrect string matching logic when accessing protected pages. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of root. Was ZDI-CAN-11355.
Certain NETGEAR devices are affected by authentication bypass. This affects GS110EMX before 1.0.1.7, GS810EMX before 1.7.1.3, XS512EM before 1.0.1.3, and XS724EM before 1.0.1.3.
An Authentication vulnerability exists in NETGEAR WGR614 v7 and v9 due to a hardcoded credential used for serial programming, a related issue to CVE-2006-1002.
An issue was discovered on NETGEAR Orbi Tri-Band Business WiFi Add-on Satellite (SRS60) AC3000 V2.5.1.106, Outdoor Satellite (RBS50Y) V2.5.1.106, and Pro Tri-Band Business WiFi Router (SRR60) AC3000 V2.5.1.106. The administrative SOAP interface allows an unauthenticated remote write of arbitrary Wi-Fi configuration data such as authentication details (e.g., the Web-admin password), network settings, DNS settings, system administration interface configuration, etc.
An issue was discovered on NETGEAR WNR1000V4 1.1.0.54 devices. The web management interface (setup.cgi) has an authentication bypass and other problems that ultimately allow an attacker to remotely compromise the device from a malicious webpage. The attacker sends an FW_remote.htm&todo=cfg_init request without a cookie, reads the Set-Cookie header in the 401 Unauthorized response, and then repeats the FW_remote.htm&todo=cfg_init request with the specified cookie.
NETGEAR ProSAFE Network Management System MyHandlerInterceptor Authentication Bypass Vulnerability. This vulnerability allows remote attackers to bypass authentication on affected installations of NETGEAR ProSAFE Network Management System. Authentication is not required to exploit this vulnerability. The specific flaw exists within the MyHandlerInterceptor class. The issue results from improper implementation of the authentication mechanism. An attacker can leverage this vulnerability to bypass authentication on the system. . Was ZDI-CAN-19718.
Certain NETGEAR devices are affected by mishandling of repeated URL calls. This affects JNR1010v2 before 2017-01-06, WNR614 before 2017-01-06, WNR618 before 2017-01-06, JWNR2000v5 before 2017-01-06, WNR2020 before 2017-01-06, JWNR2010v5 before 2017-01-06, WNR1000v4 before 2017-01-06, WNR2020v2 before 2017-01-06, R6220 before 2017-01-06, and WNDR3700v5 before 2017-01-06.
The NetGear ProSafe WNAP210 with firmware 2.0.12 allows remote attackers to bypass authentication and obtain access to the configuration page by visiting recreate.php and then visiting index.php.
Certain NETGEAR devices are affected by authentication bypass. This affects GS810EMX before 1.0.0.5, XS512EM before 1.0.0.6, and XS724EM before 1.0.0.6.
A vulnerability in the Netgear DGN2200 router with firmware version v1.0.0.46 and earlier permits unauthorized individuals to bypass the authentication. When adding "?x=1.gif" to the the requested url, it will be recognized as passing the authentication.
This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of NETGEAR R7000 1.0.11.116_10.2.100 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the processing of SOAP requests. The issue results from the lack of proper authentication verification before performing a password reset. An attacker can leverage this vulnerability to reset the admin password. Was ZDI-CAN-13483.
This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of multiple NETGEAR routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the mini_httpd service, which listens on TCP port 80 by default. The issue results from incorrect string matching logic when accessing protected pages. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of root. Was ZDI-CAN-13313.
The administrative web interface on the Netgear DG632 with firmware 3.4.0_ap allows remote attackers to bypass authentication via a direct request to (1) gateway/commands/saveconfig.html, and (2) stattbl.htm, (3) modemmenu.htm, (4) onload.htm, (5) form.css, (6) utility.js, and possibly (7) indextop.htm in html/.
Certain NETGEAR devices are affected by authentication bypass. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.
NETGEAR XR500 devices before 2.3.2.32 are affected by authentication bypass.
NETGEAR WAC510 devices before 5.0.0.17 are affected by authentication bypass.
Netgear WNR1000v3 with firmware before 1.0.2.60 contains an Authentication Bypass due to the server skipping checks for URLs containing a ".jpg".
Certain NETGEAR devices are affected by authentication bypass. This affects EX3700 before 1.0.0.64, EX3800 before 1.0.0.64, EX6120 before 1.0.0.32, EX6130 before 1.0.0.16, R6300v2 before 1.0.4.12, R6700 before 1.0.1.26, R6900 before 1.0.1.22, R7000 before 1.0.9.6, R7300DST before 1.0.0.52, R7900 before 1.0.1.12, R8000 before 1.0.3.24, R8500 before 1.0.2.74, and WNR2000v2 before 1.2.0.8.
Certain NETGEAR devices are affected by authentication bypass. This affects D6100 before V1.0.0.55, D7000 before V1.0.1.50, D7800 before V1.0.1.24, JNR1010v2 before 1.1.0.40, JWNR2010v5 before 1.1.0.40, R6100 before 1.0.1.12, R6220 before 1.1.0.50, R7500 before 1.0.0.108, R7500v2 before 1.0.3.10, WNDR4300v1 before 1.0.2.88, WNDR4300v2 before 1.0.0.48, WNDR4500v3 before 1.0.0.48, WNR1000v4 before 1.1.0.40, WNR2000v5 before 1.0.0.42, WNR2020 before 1.1.0.40, and WNR2050 before 1.1.0.40.
Certain NETGEAR devices are affected by authentication bypass. This affects D6220 before 1.0.0.28, D6400 before 1.0.0.60, D8500 before 1.0.3.29, R6250 before 1.0.4.8, R6400 before 1.0.1.22, R6400v2 before 1.0.2.32, R7100LG before 1.0.0.32, R7300DST before 1.0.0.52, R8300 before 1.0.2.94, and R8500 before 1.0.2.100.
Netgear RAX30 (AX2400), prior to version 1.0.6.74, was affected by an authentication bypass vulnerability, allowing an unauthenticated attacker to gain administrative access to the device's web management interface by resetting the admin password.
A remote authentication restriction bypass vulnerability was discovered in Aruba AirWave Management Platform version(s) prior to 8.2.12.1. Aruba has released patches for AirWave Management Platform that address this security vulnerability.
In Apache Hadoop versions 3.0.0-alpha2 to 3.0.0, 2.9.0 to 2.9.2, 2.8.0 to 2.8.5, any users can access some servlets without authentication when Kerberos authentication is enabled and SPNEGO through HTTP is not enabled.
A PendingIntent hijacking in NetworkPolicyManagerService prior to SMR Sep-2021 Release 1 allows attackers to get IMSI data.
A potential vulnerability in Splunk Enterprise's implementation of DUO MFA allows for bypassing the MFA verification in Splunk Enterprise versions before 8.1.6. The potential vulnerability impacts Splunk Enterprise instances configured to use DUO MFA and does not impact or affect a DUO product or service.
The OTP Login Woocommerce & Gravity Forms plugin for WordPress is vulnerable to authentication bypass. This is due to the fact that when generating OTP codes for users to use in order to login via phone number, the plugin returns these codes in an AJAX response. This makes it possible for unauthenticated attackers to obtain login codes for administrators. This does require an attacker have access to the phone number configured for an account, which can be obtained via social engineering or reconnaissance.
The UserPro plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 5.1.1. This is due to insufficient verification on the user being supplied during a Facebook login through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email. An attacker can leverage CVE-2023-2448 and CVE-2023-2446 to get the user's email address to successfully exploit this vulnerability.
An issue was discovered in SMA Solar Technology products. The SMAdata2+ communication protocol does not properly use authentication with encryption: it is vulnerable to man in the middle, packet injection, and replay attacks. Any setting change, authentication packet, scouting packet, etc. can be replayed, injected, or used for a man in the middle session. All functionalities available in Sunny Explorer can effectively be done from anywhere within the network as long as an attacker gets the packet setup correctly. This includes the authentication process for all (including hidden) access levels and the changing of settings in accordance with the gained access rights. Furthermore, because the SMAdata2+ communication channel is unencrypted, an attacker capable of understanding the protocol can eavesdrop on communications. NOTE: the vendor's position is that authentication with encryption is not required on an isolated subnetwork. Also, only Sunny Boy TLST-21 and TL-21 and Sunny Tripower TL-10 and TL-30 could potentially be affected