The telnet service in LevelOne WBR-3460 4-Port ADSL 2/2+ Wireless Modem Router with firmware 1.00.11 and 1.00.12 does not require authentication, which allows remote attackers on the local or wireless network to obtain administrative access.

The ASUS DSL-N17U modem with firmware 1.1.0.2 allows attackers to access the admin interface by changing the admin password without authentication via a POST request to Advanced_System_Content.asp with the uiViewTools_username=admin&uiViewTools_Password= and uiViewTools_PasswordConfirm= substrings.

Unspecified vulnerability in the Header Image Module before 5.x-1.1 for Drupal allows remote attackers to access the administration pages via unknown attack vectors.

A remote attacker can bypass the Management Mode on the Canon LBP7110Cw web interface without a PIN for /checkLogin.cgi via vectors involving /portal_top.html to get full access to the device. NOTE: the vendor reportedly responded that this issue occurs when a customer keeps the default settings without using the countermeasures and best practices shown in the documentation

TestLink before 1.7.1 does not enforce an unspecified authorization mechanism, which has unknown impact and attack vectors.

An issue was discovered on Fujitsu Eternus Storage DX200 S4 devices through 2020-11-25. After logging into the portal as a root user (using any web browser), the portal can be accessed with root privileges when the URI cgi-bin/csp?cspid={XXXXXXXXXX}&csppage=cgi_PgOverview&csplang=en is visited from a different web browser.

The Vonage Motorola Phone Adapter VT 2142-VD does not properly verify that a SIP INVITE message originated from a legitimate server, which allows remote attackers to send spoofed INVITE messages, as demonstrated by a flood of messages triggering a denial of service, and by phone calls with malicious content.

A vulnerability in session management for the web-based interface of Cisco Small Business Smart and Managed Switches could allow an unauthenticated, remote attacker to defeat authentication protections and gain unauthorized access to the management interface. The attacker could obtain the privileges of the highjacked session account, which could include administrator privileges on the device. The vulnerability is due to the use of weak entropy generation for session identifier values. An attacker could exploit this vulnerability to determine a current session identifier through brute force and reuse that session identifier to take over an ongoing session. In this way, an attacker could take actions within the management interface with privileges up to the level of the administrative user.

Unspecified vulnerability in main.php of BugHotel Reservation System before 4.9.9 P3 allows remote attackers to bypass authentication and gain administrative access via unspecified vectors. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information.

This vulnerability allows remote attackers to bypass authentication on vulnerable installations of Quest NetVault Backup 11.2.0.13. The specific flaw exists within JSON RPC Request handling. By setting the checksession parameter to a specific value, it is possible to bypass authentication to critical functions. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of SYSTEM. Was ZDI-CAN-4752.

Multiple command handlers in CA (Computer Associates) BrightStor ARCserve Backup for Laptops and Desktops r11.0 through r11.5 do not verify if a peer is authenticated, which allows remote attackers to add and delete users, and start client restores.

HGiga MailSherlock contains weak authentication flaw that attackers grant privilege remotely with default password generation mechanism.

An authentication bypass flaw was found in the smart_proxy_dynflow component used by Foreman. A malicious attacker can use this flaw to remotely execute arbitrary commands on machines managed by vulnerable Foreman instances, in a highly privileged context.

The telnet service in Cisco Video Surveillance IP Gateway Encoder/Decoder (Standalone and Module) firmware 1.8.1 and earlier, Video Surveillance SP/ISP Decoder Software firmware 1.11.0 and earlier, and the Video Surveillance SP/ISP firmware 1.23.7 and earlier does not require authentication, which allows remote attackers to perform administrative actions, aka CSCsj31729.

The login method in LoginModule implementations in Apache Geronimo 2.0 does not throw FailedLoginException for failed logins, which allows remote attackers to bypass authentication requirements, deploy arbitrary modules, and gain administrative access by sending a blank username and password with the command line deployer in the deployment module.

openshift-ansible before versions 3.9.23, 3.7.46 deploys a misconfigured etcd file that causes the SSL client certificate authentication to be disabled. Quotations around the values of ETCD_CLIENT_CERT_AUTH and ETCD_PEER_CLIENT_CERT_AUTH in etcd.conf result in etcd being configured to allow remote users to connect without any authentication if they can access the etcd server bound to the network on the master nodes. An attacker could use this flaw to read and modify all the data about the Openshift cluster in the etcd datastore, potentially adding another compute node, or bringing down the entire cluster.

Unspecified vulnerability in HP Select Identity 4.01 through 4.01.010 and 4.10 through 4.13.001 allows remote attackers to obtain unspecified access via unknown vectors.

NetSupport Manager Client before 10.20.0004 allows remote attackers to bypass the (1) basic and (2) authentication schemes by spoofing the NetSupport Manager.

For Crestron TSW-X60 version prior to 2.001.0037.001 and MC3 version prior to 1.502.0047.001, The devices are shipped with authentication disabled, and there is no indication to users that they need to take steps to enable it. When compromised, the access to the CTP console is left open.

A flaw was found in Linux-Pam in versions prior to 1.5.1 in the way it handle empty passwords for non-existing users. When the user doesn't exist PAM try to authenticate with root and in the case of an empty password it successfully authenticate.

Session fixation vulnerability in HP Systems Insight Manager (SIM) 4.2 and 5.0 SP4 and SP5 allows remote attackers to hijack web sessions by setting the JSESSIONID cookie.

An issue was discovered in Zoho ManageEngine Exchange Reporter Plus before build number 5510, AD360 before build number 4228, ADSelfService Plus before build number 5817, DataSecurity Plus before build number 6033, RecoverManager Plus before build number 6017, EventLog Analyzer before build number 12136, ADAudit Plus before build number 6052, O365 Manager Plus before build number 4334, Cloud Security Plus before build number 4110, ADManager Plus before build number 7055, and Log360 before build number 5166. The remotely accessible Java servlet com.manageengine.ads.fw.servlet.UpdateProductDetails is prone to an authentication bypass. System integration properties can be modified and lead to full ManageEngine suite compromise.

In PrestaShop from version 1.5.0.0 and before version 1.7.6.6, the authentication system is malformed and an attacker is able to forge requests and execute admin commands. The problem is fixed in 1.7.6.6.

D-Link DIR-615 Wireless N 300 Router allows authentication bypass via a modified POST request to login.cgi. This issue occurs because it fails to validate the password field. Successful exploitation of this issue allows an attacker to take control of the affected device.

webSPELL 4.0, and possibly later versions, allows remote attackers to bypass authentication via a ws_auth cookie, a different vulnerability than CVE-2006-4782.

The Cisco Unified IP Conference Station 7935 3.2(15) and earlier, and Station 7936 3.3(12) and earlier does not properly handle administrator HTTP sessions, which allows remote attackers to bypass authentication controls via a direct URL request to the administrative HTTP interface for a limited time

EMC NetWorker may potentially be vulnerable to an unauthenticated remote code execution vulnerability in the Networker Client execution service (nsrexecd) when oldauth authentication method is used. An unauthenticated remote attacker could send arbitrary commands via RPC service to be executed on the host system with the privileges of the nsrexecd service, which runs with administrative privileges.

Wi2be SMART HP WMT R1.2.20_201400922 allows unauthorized remote attackers to reset the admin password via the /ConfigWizard/ChangePwd.esp?2admin URL (Attackers can login using the "admin" username with password "admin" after a successful attack).

An issue was discovered in dnaTools dnaLIMS 4-2015s13. dnaLIMS is vulnerable to unauthenticated command execution through an improperly protected administrative web shell (cgi-bin/dna/sysAdmin.cgi POST requests).

ASUS HG100 devices with firmware before 1.05.12 allow unauthenticated access, leading to remote command execution.

Unspecified vulnerability in a cryptographic feature in MailEnable Standard Edition before 1.93, Professional Edition before 1.73, and Enterprise Edition before 1.21 leads to "weakened authentication security" with unknown impact and attack vectors. NOTE: due to lack of details, it is not clear whether this is the same as CVE-2006-1792.

The ping tool in multiple D-Link and TRENDnet devices allow remote attackers to execute arbitrary code via the ping_addr parameter to ping.ccp.

Anyterm Daemon in Infoblox Network Automation NetMRI before NETMRI-23483 allows remote attackers to execute arbitrary commands with root privileges via a crafted terminal/anyterm-module request.

An issue was discovered in WildFly 10.1.2.Final. It is possible for an attacker to access the administration panel on TCP port 9990 without any authentication using "anonymous" access that is automatically created. Once logged in, a misconfiguration present by default (auto-deployment) permits an anonymous user to deploy a malicious .war file, leading to remote code execution. NOTE: the vendor indicates that anonymous access is not available in the default installation; however, it remains optional because there are several use cases for it, including development environments and network architectures that have a proxy server for access control to the WildFly server

IBM General Parallel File System (GPFS) 3.4 before 3.4.0.32, 3.5 before 3.5.0.24, and 4.1 before 4.1.0.7 in certain cipherList configurations allows remote attackers to bypass authentication and execute arbitrary programs as root via unspecified vectors.

The management interface in Cisco TelePresence Video Communication Server (VCS) and Cisco Expressway before X7.2.4, X8 before X8.1.2, and X8.2 before X8.2.2 and Cisco TelePresence Conductor before X2.3.1 and XC2.4 before XC2.4.1 allows remote attackers to bypass authentication via crafted login parameters, aka Bug IDs CSCur02680 and CSCur05556.

Schrack Technik microControl with firmware before 1.7.0 (937) stores sensitive information under the web root with insufficient access control, which allows remote attackers to obtain access data for the ftp and telnet services via a direct request for ZTPUsrDtls.txt.

The check_login function in D-Link DNR-326 before 2.10 build 03 allows remote attackers to bypass authentication and log in by setting the username cookie parameter to an arbitrary string.

D-Link DNS-320L firmware before 1.04b12, DNS-327L before 1.03b04 Build0119, DNR-326 1.40b03, DNS-320B 1.02b01, DNS-345 1.03b06, DNS-325 1.05b03, and DNS-322L 2.00b07 allow remote attackers to bypass authentication and log in with administrator permissions by passing the cgi_set_wto command in the cmd parameter, and setting the spawned session's cookie to username=admin.

Aztech ADSL DSL5018EN (1T1R), DSL705E, and DSL705EU devices improperly manage sessions, which allows remote attackers to bypass authentication in opportunistic circumstances and execute arbitrary commands with administrator privileges by leveraging an existing web portal login.

AIRTAME HDMI dongle with firmware before 2.2.0 allows unauthenticated access to a big part of the management interface. It is possible to extract all information including the Wi-Fi password, reboot, or force a software update at an arbitrary time.

On certain Brother devices, authorization is mishandled by including a valid AuthCookie cookie in the HTTP response to a failed login attempt. Affected models are: MFC-J6973CDW MFC-J4420DW MFC-8710DW MFC-J4620DW MFC-L8850CDW MFC-J3720 MFC-J6520DW MFC-L2740DW MFC-J5910DW MFC-J6920DW MFC-L2700DW MFC-9130CW MFC-9330CDW MFC-9340CDW MFC-J5620DW MFC-J6720DW MFC-L8600CDW MFC-L9550CDW MFC-L2720DW DCP-L2540DW DCP-L2520DW HL-3140CW HL-3170CDW HL-3180CDW HL-L8350CDW HL-L2380DW ADS-2500W ADS-1000W ADS-1500W.

The network enabled distribution of Kura before 2.1.0 takes control over the device's firewall setup but does not allow IPv6 firewall rules to be configured. Still the Equinox console port 5002 is left open, allowing to log into Kura without any user credentials over unencrypted telnet and executing commands using the Equinox "exec" command. As the process is running as "root" full control over the device can be acquired. IPv6 is also left in auto-configuration mode, accepting router advertisements automatically and assigns a MAC address based IPv6 address.

A vulnerability was discovered in Siemens ViewPort for Web Office Portal before revision number 1453 that could allow an unauthenticated remote user to upload arbitrary code and execute it with the permissions of the operating-system user running the web server by sending specially crafted network packets to port 443/TCP or port 80/TCP.

The doFilter method in UrlAccessController in HPE Intelligent Management Center (iMC) PLAT 7.2 E0403P06 allows remote bypass of authentication via unspecified strings in a URI.

An issue was discovered on Mofi Network MOFI4500-4GXeLTE 4.1.5-std devices. The authentication function contains undocumented code that provides the ability to authenticate as root without knowing the actual root password. An adversary with the private key can remotely authenticate to the management interface as root.

TIBCO Enterprise Administrator 1.0.0 and Enterprise Administrator SDK 1.0.0 do not properly enforce administrative authentication requirements, which allows remote attackers to execute arbitrary commands via unspecified vectors.

A remote attacker can bypass the System Manager Mode on the Canon LBP6030w web interface without a PIN for /checkLogin.cgi via vectors involving /portal_top.html to get full access to the device. NOTE: the vendor reportedly responded that this issue occurs when a customer keeps the default settings without using the countermeasures and best practices shown in the documentation

A remote urlaccesscontroller authentication bypass vulnerability was discovered in HPE Intelligent Management Center (iMC) version(s): Prior to iMC PLAT 7.3 (E0705P07).