A vulnerability in the Cisco Nexus 9000 Series Platform Leaf Switches for Application Centric Infrastructure (ACI) could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on the affected device. This vulnerability affects Cisco Nexus 9000 Series Leaf Switches (TOR) - ACI Mode and Cisco Application Policy Infrastructure Controller (APIC). More Information: CSCuy93241. Known Affected Releases: 11.2(2x) 11.2(3x) 11.3(1x) 11.3(2x) 12.0(1x). Known Fixed Releases: 11.2(2i) 11.2(2j) 11.2(3f) 11.2(3g) 11.2(3h) 11.2(3l) 11.3(0.236) 11.3(1j) 11.3(2i) 11.3(2j) 12.0(1r).

Multiple stack-based buffer overflows in Command EXEC in Cisco IOS allow local users to gain privileges via unspecified vectors, aka (1) PSIRT-0474975756 and (2) PSIRT-0388256465. NOTE: as of 20071016, the only disclosure is a vague pre-advisory with no actionable information. However, since it is from a well-known researcher, it is being assigned a CVE identifier for tracking purposes.

The FTP service in Cisco AsyncOS on Email Security Appliance (ESA) devices 9.6.0-000 through 9.9.6-026, Web Security Appliance (WSA) devices 9.0.0-162 through 9.5.0-444, and Content Security Management Appliance (SMA) devices allows remote attackers to cause a denial of service via a flood of FTP traffic, aka Bug IDs CSCuz82907, CSCuz84330, and CSCuz86065.

Buffer overflow in the telnet server in Cisco Unified IP Phone 7906G, 7911G, 7941G, 7961G, 7970G, and 7971G running SCCP firmware might allow remote authenticated users to execute arbitrary code via a crafted command.

Multiple buffer overflows in securecgi-bin/CSuserCGI.exe in User-Changeable Password (UCP) before 4.2 in Cisco Secure Access Control Server (ACS) for Windows and ACS Solution Engine allow remote attackers to execute arbitrary code via a long argument located immediately after the Logout argument, and possibly unspecified other vectors.

Buffer overflow in Cisco Unified IP Phone 7940, 7940G, 7960, and 7960G running SIP firmware might allow remote attackers to execute arbitrary code via a SIP message with crafted MIME data.

Buffer overflow in Cisco Unified IP Phone 7940, 7940G, 7960, and 7960G running SCCP and SIP firmware might allow remote attackers to execute arbitrary code via a crafted DNS response.

Buffer overflow in Cisco Unified Communications Manager (Unified CM) 7.1(x) before 7.1(5b)su6, 8.5(x) before 8.5(1)su6, 8.6(x) before 8.6(2a)su3, and 9.x before 9.1(2) allows remote authenticated users to execute arbitrary code via unspecified vectors, aka Bug ID CSCud54358.

Buffer overflow in a certain driver in Cisco Security Agent 4.5.1 before 4.5.1.672, 5.0 before 5.0.0.225, 5.1 before 5.1.0.106, and 5.2 before 5.2.0.238 on Windows allows remote attackers to execute arbitrary code via a crafted SMB packet in a TCP session on port (1) 139 or (2) 445.

Multiple vulnerabilities in Cisco SD-WAN vEdge Software could allow an attacker to execute arbitrary code as the root user or cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Cisco Intrusion Prevention System (IPS) Software on IPS NME devices before 7.0(9)E4 allows remote attackers to cause a denial of service (device reload) via malformed IPv4 packets that trigger incorrect memory allocation, aka Bug ID CSCua61977.

Multiple vulnerabilities exist in the web-based management interface of Cisco Small Business RV Series Routers. A remote attacker could execute arbitrary commands or bypass authentication and upload files on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in Cisco Webex Network Recording Player for Windows and MacOS and Cisco Webex Player for Windows and MacOS could allow an attacker to execute arbitrary code on an affected system. The vulnerability is due to insufficient validation of values within Webex recording files formatted as either Advanced Recording Format (ARF) or Webex Recording Format (WRF). An attacker could exploit the vulnerability by sending a user a malicious ARF or WRF file through a link or email attachment and persuading the user to open the file. A successful exploit could allow the attacker to execute arbitrary code on the affected system with the privileges of the targeted user.

Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Cisco Discovery Protocol component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code as root or cause a denial of service (DoS) condition on the affected device. The vulnerability exists because of insufficiently validated Cisco Discovery Protocol packet headers. An attacker could exploit this vulnerability by sending a crafted Cisco Discovery Protocol packet to a Layer 2 adjacent affected device. A successful exploit could allow the attacker to cause a buffer overflow that could allow the attacker to execute arbitrary code as root or cause a DoS condition on the affected device. This vulnerability affects the following if configured to use Cisco Discovery Protocol: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvc22202, CSCvc22205, CSCvc22208, CSCvc88078, CSCvc88150, CSCvc88159, CSCvc88162, CSCvc88167.

Heap-based buffer overflow in the VLAN Trunking Protocol (VTP) feature in Cisco IOS 12.1(19) allows remote attackers to execute arbitrary code via a long VLAN name in a VTP type 2 summary advertisement.

A vulnerability in the software-based SSL/TLS message handler of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient validation of SSL/TLS messages when the device performs software-based SSL/TLS decryption. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: Datagram TLS (DTLS) messages cannot be used to exploit this vulnerability.

A vulnerability in the processing of SSH connections for multi-instance deployments of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. This vulnerability is due to a lack of proper error handling when an SSH session fails to be established. An attacker could exploit this vulnerability by sending a high rate of crafted SSH connections to the instance. A successful exploit could allow the attacker to cause resource exhaustion, which causes a DoS condition on the affected device. The device must be manually reloaded to recover.

The TrustZone implementation in certain Broadcom MediaxChange firmware could allow an unauthenticated, physically proximate attacker to achieve arbitrary code execution in the TrustZone Trusted Execution Environment (TEE) of an affected device. This, for example, affects certain Cisco IP Phone and Wireless IP Phone products before 2021-07-07. Exploitation is possible only when the attacker can disassemble the device in order to control the voltage/current for chip pins.

The Cisco IP Phone 7940 allows remote attackers to cause a denial of service (reboot) via a large amount of TCP SYN packets (syn flood) to arbitrary ports, as demonstrated to port 80.

A vulnerability in the web framework of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a buffer overflow condition on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to the affected software improperly parsing malformed HTTP packets that are destined to a device. An attacker could exploit this vulnerability by sending a malformed HTTP packet to an affected device for processing. A successful exploit could allow the attacker to cause a buffer overflow condition on the affected device, resulting in a DoS condition.

A vulnerability in the bidirectional forwarding detection (BFD) hardware offload feature of Cisco IOS XR Software for Cisco ASR 9000 Series Aggregation Services Routers, ASR 9902 Compact High-Performance Routers, and ASR 9903 Compact High-Performance Routers could allow an unauthenticated, remote attacker to cause a line card to reset, resulting in a denial of service (DoS) condition. This vulnerability is due to the incorrect handling of malformed BFD packets that are received on line cards where the BFD hardware offload feature is enabled. An attacker could exploit this vulnerability by sending a crafted IPv4 BFD packet to an affected device. A successful exploit could allow the attacker to cause line card exceptions or a hard reset, resulting in loss of traffic over that line card while the line card reloads.

A vulnerability in the memory buffer of Cisco Wireless LAN Controller (WLC) AireOS Software could allow an unauthenticated, adjacent attacker to cause memory leaks that could eventually lead to a device reboot. This vulnerability is due to memory leaks caused by multiple clients connecting under specific conditions. An attacker could exploit this vulnerability by causing multiple wireless clients to attempt to connect to an access point (AP) on an affected device. A successful exploit could allow the attacker to cause the affected device to reboot after a significant amount of time, resulting in a denial of service (DoS) condition.

A vulnerability in the configuration and monitoring service of the Cisco SD-WAN Solution could allow an authenticated, local attacker to execute arbitrary code with root privileges or cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incomplete bounds checks for data that is provided by the configuration and monitoring service of the affected solution. An attacker could exploit this vulnerability by sending malicious data to the vDaemon listening service on an affected device. A successful exploit could allow the attacker to cause a buffer overflow condition on the affected device, which could allow the attacker to execute arbitrary code with root privileges on the device or cause the vDaemon listening service to reload and result in a DoS condition on the device. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi70003.

A vulnerability in the Zero Touch Provisioning service of the Cisco SD-WAN Solution could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incorrect bounds checks for certain values in packets that are sent to the Zero Touch Provisioning service of the affected software. An attacker could exploit this vulnerability by sending malicious packets to the affected software for processing. When the software processes the packets, a buffer overflow condition could occur and cause an affected device to reload. A successful exploit could allow the attacker to cause a temporary DoS condition while the device reloads. This vulnerability can be exploited only by traffic that is destined for an affected device. It cannot be exploited by traffic that is transiting a device. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69914.

A vulnerability in the IP Version 4 (IPv4) fragment reassembly function of Cisco 3500, 5500, and 8500 Series Wireless LAN Controller Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to a corruption of an internal data structure process that occurs when the affected software reassembles certain IPv4 packets. An attacker could exploit this vulnerability by sending certain malformed IPv4 fragments to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. This vulnerability affects all releases of 8.4 until the first fixed release for the 5500 and 8500 Series Wireless LAN Controllers and releases 8.5.103.0 and 8.5.105.0 for the 3500, 5500, and 8500 Series Wireless LAN Controllers. Cisco Bug IDs: CSCvf89222.

A vulnerability in the CLI parser of Cisco FXOS Software and Cisco UCS Fabric Interconnect Software could allow an authenticated, local attacker to cause a buffer overflow on an affected device. The vulnerability is due to incorrect input validation in the CLI parser subsystem. An attacker could exploit this vulnerability by exceeding the expected length of user input. A successful exploit could allow the attacker to execute arbitrary code with root privileges on the affected system. This vulnerability affects Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvb61099, CSCvb86743.

A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition. The vulnerability exists because the affected software insufficiently validates header values in Cisco Fabric Services packets. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow that could allow the attacker to execute arbitrary code or cause a DoS condition. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69954, CSCve02463, CSCve02785, CSCve02787, CSCve02804, CSCve04859.

A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to craft a packet to the management interface on an affected system, causing a buffer overflow. The vulnerability is due to incorrect input validation in the authentication module of the NX-API subsystem. An attacker could exploit this vulnerability by sending a crafted HTTP or HTTPS packet to the management interface of an affected system with the NX-API feature enabled. An exploit could allow the attacker to execute arbitrary code as root. Note: NX-API is disabled by default. This vulnerability affects: MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvd45804, CSCve02322, CSCve02412.

A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packets when the software processes packet data. An attacker could exploit this vulnerability by sending a maliciously crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow condition on the device, which could cause process crashes and result in a DoS condition on the device. This vulnerability affects Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69960, CSCve02463, CSCve04859, CSCve41530, CSCve41537, CSCve41541, CSCve41557.

A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packet headers when the software processes packet data. An attacker could exploit this vulnerability by sending a maliciously crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow condition on the device, which could allow the attacker to execute arbitrary code or cause a DoS condition on the device. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69962, CSCve02808, CSCve02810, CSCve02812, CSCve02819, CSCve02822, CSCve02831, CSCve04859.

Stack-based buffer overflow in the Cisco Thor decoder before commit 18de8f9f0762c3a542b1122589edb8af859d9813 allows local users to cause a denial of service (segmentation fault) and execute arbitrary code via a crafted non-conformant Thor bitstream.

A vulnerability in the Internet Group Management Protocol (IGMP) Snooping feature of Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code and gain full control of an affected system. The attacker could also cause an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to a buffer overflow condition in the IGMP Snooping subsystem. An attacker could exploit this vulnerability by sending crafted IGMP packets to an affected system. An exploit could allow the attacker to execute arbitrary code and gain full control of the affected system or cause the affected system to reload, resulting in a DoS condition. This vulnerability affects Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode. Cisco Bug IDs: CSCuv79620, CSCvg71263.

Multiple vulnerabilities exist in the Cisco Webex Network Recording Player for Advanced Recording Format (ARF) and Webex Recording Format (WRF) files. An attacker could exploit these vulnerabilities by providing a user with a malicious .arf or .wrf file via email or URL and convincing the user to launch the file in the Webex recording players. Exploitation of these vulnerabilities could allow arbitrary code execution on the system of a targeted user. These vulnerabilities affect ARF and WRF recording players available from Cisco Webex Meetings Suite sites, Cisco Webex Meetings Online sites, and Cisco Webex Meetings Server. Cisco Bug IDs: CSCvi02621, CSCvi02965, CSCvi63329, CSCvi63333, CSCvi63335, CSCvi63374, CSCvi63376, CSCvi63377, CSCvi63391, CSCvi63392, CSCvi63396, CSCvi63495, CSCvi63497, CSCvi63498, CSCvi82684, CSCvi82700, CSCvi82705, CSCvi82725, CSCvi82737, CSCvi82742, CSCvi82760, CSCvi82771, CSCvj51284, CSCvj51294.

A vulnerability in the Cisco Fabric Services (CFS) component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packet headers when the software processes packet data. An attacker could exploit this vulnerability by sending a maliciously crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow condition on the device, which could allow the attacker to execute arbitrary code on the device. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69943, CSCve02429, CSCve02433, CSCve02435, CSCve02445, CSCve04859.

A vulnerability in the web portal of the Cisco Prime Collaboration Provisioning Tool could allow an unauthenticated, remote attacker to create a denial of service (DoS) condition for individual users. The vulnerability is due to weak login controls. An attacker could exploit this vulnerability by using a brute-force attack (Repeated Bad Login Attempts). A successful exploit could allow the attacker to restrict user access. Manual administrative intervention is required to restore access. Cisco Bug IDs: CSCvd07264.

Heap-based buffer overflow in the TFTP server capability in Cisco IOS 11.1, 11.2, and 11.3 allows remote attackers to cause a denial of service (reset) or modify configuration via a long filename.

A vulnerability in the Simple Network Management Protocol (SNMP) subsystem communication channel through the Cisco 550X Series Stackable Managed Switches could allow an authenticated, remote attacker to cause the device to reload unexpectedly, causing a denial of service (DoS) condition. The device nay need to be manually reloaded to recover. The vulnerability is due to lack of proper input throttling of ingress SNMP traffic over an internal interface. An attacker could exploit this vulnerability by sending a crafted, heavy stream of SNMP traffic to the targeted device. An exploit could allow the attacker to cause the device to reload unexpectedly, causing a DoS condition. Cisco Bug IDs: CSCvg22135.

Multiple SSH2 servers and clients do not properly handle packets or data elements with incorrect length specifiers, which may allow remote attackers to cause a denial of service or possibly execute arbitrary code, as demonstrated by the SSHredder SSH protocol test suite.

Format String vulnerability in the Link Layer Discovery Protocol (LLDP) subsystem of Cisco IOS Software, Cisco IOS XE Software, and Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition or execute arbitrary code with elevated privileges on an affected device. Cisco Bug IDs: CSCvd73664.

Buffer overflow in the embedded HTTP server for Cisco Catalyst switches running CatOS 5.4 through 7.3 allows remote attackers to cause a denial of service (reset) via a long HTTP request.

A vulnerability in the quality of service (QoS) subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code with elevated privileges. The vulnerability is due to incorrect bounds checking of certain values in packets that are destined for UDP port 18999 of an affected device. An attacker could exploit this vulnerability by sending malicious packets to an affected device. When the packets are processed, an exploitable buffer overflow condition may occur. A successful exploit could allow the attacker to execute arbitrary code on the affected device with elevated privileges. The attacker could also leverage this vulnerability to cause the device to reload, causing a temporary DoS condition while the device is reloading. The malicious packets must be destined to and processed by an affected device. Traffic transiting a device will not trigger the vulnerability. Cisco Bug IDs: CSCvf73881.

A vulnerability in the forwarding information base (FIB) code of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause inconsistency between the routing information base (RIB) and the FIB, resulting in a denial of service (DoS) condition. The vulnerability is due to incorrect processing of extremely long routing updates. An attacker could exploit this vulnerability by sending a large routing update. A successful exploit could allow the attacker to trigger inconsistency between the FIB and the RIB, resulting in a DoS condition. Cisco Bug IDs: CSCus84718.

Multiple Buffer Overflow vulnerabilities in the Link Layer Discovery Protocol (LLDP) subsystem of Cisco IOS Software, Cisco IOS XE Software, and Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition or execute arbitrary code with elevated privileges on an affected device. Cisco Bug IDs: CSCuo17183, CSCvd73487.

MCServer in the Cisco Management Controller in Cisco Unified Computing System (UCS) allows local users to cause a denial of service (application crash) via invalid MCTools parameters, aka Bug ID CSCtg20734.

The DMVPN tunnel implementation in Cisco IOS 15.2 allows remote attackers to cause a denial of service (persistent IKE state) via a large volume of hub-to-spoke traffic, aka Bug ID CSCtq39602.

Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.

A vulnerability in the TCP throttling process of Cisco UCS C-Series Rack Servers 3.0(0.234) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient rate-limiting protection. An attacker could exploit this vulnerability by sending a high rate of TCP SYN packets to a specific TCP listening port on an affected device. An exploit could allow the attacker to cause a specific TCP listening port to stop accepting new connections, resulting in a DoS condition. Cisco Bug IDs: CSCva65544.