** UNSUPPORTED WHEN ASSIGNED ** A vulnerability classified as critical has been found in Vivotek IB8367A VVTK-0100b. Affected is the function getenv of the file upload_file.cgi. The manipulation of the argument QUERY_STRING leads to command injection. It is possible to launch the attack remotely. The identifier of this vulnerability is VDB-273528. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the affected release tree is end-of-life.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in Vivotek SD9364 VVTK-0103f. It has been rated as critical. This issue affects the function getenv of the file upload_file.cgi. The manipulation of the argument QUERY_STRING leads to command injection. The attack may be initiated remotely. The associated identifier of this vulnerability is VDB-273527. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the affected release tree is end-of-life.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in Vivotek SD9364 VVTK-0103f. It has been declared as critical. This vulnerability affects the function read of the component httpd. The manipulation of the argument Content-Length leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-273526 is the identifier assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the affected release tree is end-of-life.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in Vivotek CC8160 VVTK-0100d. It has been classified as critical. This affects the function getenv of the file upload_file.cgi. The manipulation of the argument QUERY_STRING leads to command injection. It is possible to initiate the attack remotely. The identifier VDB-273525 was assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the affected release tree is end-of-life.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in Vivotek CC8160 VVTK-0100d and classified as critical. Affected by this issue is the function read of the component httpd. The manipulation of the argument Content-Length leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-273524. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the affected release tree is end-of-life.

An authentication bypass vulnerability in VIVOTEK IPCam versions prior to 0x13a was found.

An issue in vivotek Network Camera v.FD8166A-VVTK-0204j allows a remote attacker to execute arbitrary code via a crafted payload to the upload_file.cgi component.

Vivotek FD8136 devices allow remote memory corruption and remote code execution because of a stack-based buffer overflow, related to sprintf, vlocal_buff_4326, and set_getparam.cgi. NOTE: The vendor has disputed this as a vulnerability and states that the issue does not cause a web server crash or have any other affect on it's performance

VIVOTEK IP Camera devices with firmware before 0x20x have a stack-based buffer overflow via a crafted HTTP header.

Vivotek IP7137 camera with firmware version 0200a by default dos not require to provide any password when logging in as an administrator. While it is possible to set up such a password, a user is not informed about such a need. The vendor has not replied to the CNA. Possibly all firmware versions are affected. Since the product has met End-Of-Life phase, a fix is not expected to be released.

A post-authentication remote buffer overflow vulnerability exists in the /cgi-bin/admin/eventtask.cgi endpoint of the admin interface of Vivotek FD8136 cameras running firmware version FD8136-VVTK-0300a. This flaw allows an authenticated attacker to execute arbitrary code as root on the device remotely.

A remote buffer overflow vulnerability exists in the /cgi-bin/dido/setdo.cgi endpoint of the admin interface of Vivotek FD8136 cameras running firmware version FD8136-VVTK-0300a. This flaw allows an authenticated attacker to execute arbitrary code as root on the device.

SoftEther VPN 5.02.5187 is vulnerable to Buffer Overflow in the Command.c file via the PtMakeCert and PtMakeCert2048 functions. NOTE: the Supplier disputes this because the behavior only allows a user to attack himself by typing a long string on a command line.

Telesquare TLR-2005KSH 1.1.4 has an unauthorized stack overflow vulnerability when requesting the admin.cgi parameter with setAutorest.

Telesquare TLR-2005KSH 1.1.4 is affected by an unauthorized stack overflow vulnerability when requesting the admin.cgi parameter with setSyncTimeHost.

Tenda AC8V4 V16.03.34.06 was discovered to contain a stack overflow via the urls parameter in the function get_parentControl_list_Info.

Tenda AC10 V1.0 V15.03.06.23 is vulnerable to Buffer Overflow in form_fast_setting_wifi_set via the parameter ssid.

Telesquare TLR-2005KSH 1.1.4 has an unauthorized stack overflow vulnerability when requesting the admin.cgi parameter with setUsernamePassword.

Tenda AC18 V15.03.05.19 is vulnerable to Buffer Overflow via function formSetMacFilterCfg.

Tenda AC6 V15.03.05.16 firmware has a buffer overflow vulnerability in the formexeCommand function.

Telesquare TLR-2005KSH 1.1.4 has an unauthorized stack overflow vulnerability in the login interface when requesting systemtil.cgi.

Telesquare TLR-2005KSH 1.1.4 is vulnerable to unauthorized stack buffer overflow vulnerability when requesting admin.cgi parameter with setDdns.

Tenda AC8V4 V16.03.34.06 was discovered to contain a stack overflow via the shareSpeed parameter in the sub_47D878 function.

Tenda AC8V4 V16.03.34.06 was discovered to contain a stack overflow via the shareSpeed parameter in the sub_49E098 function.

Tenda i12 V1.0.0.10(3805) was discovered to contain a buffer overflow via the list parameter in the formwrlSSIDset function.

Tenda AC10 V4.0si_V16.03.10.20 is vulnerable to Buffer Overflow in AdvSetMacMtuWan via mac2.

In Telesquare TLR-2005KSH 1.1.4, an unauthorized stack overflow vulnerability exists when requesting admin.cgi parameter with setSyncTimeHost.

Tenda O4 V3.0 V1.0.0.10(2936) is vulnerable to Buffer Overflow in the function SafeSetMacFilter of the file /goform/setMacFilterList via the argument remark/type/time.

SoftEther VPN 5.02.5187 is vulnerable to Buffer Overflow in Internat.c via the UniToStrForSingleChars function. NOTE: the Supplier disputes this because the behavior only enables a local user to attack himself through the UI,

The nsXBLProtoImpl::InstallImplementation function in Mozilla Firefox before 29.0, Firefox ESR 24.x before 24.5, Thunderbird before 24.5, and SeaMonkey before 2.26 does not properly check whether objects are XBL objects, which allows remote attackers to execute arbitrary code or cause a denial of service (buffer overflow) via crafted JavaScript code that accesses a non-XBL object as if it were an XBL object.

A buffer overflow was addressed with improved bounds checking. This issue is fixed in iOS 18.4 and iPadOS 18.4, iPadOS 17.7.6, macOS Sequoia 15.4, macOS Sonoma 14.7.5, macOS Ventura 13.7.5, visionOS 2.4, watchOS 11.4. An app may be able to cause unexpected system termination.

A vulnerability has been identified in OpenV2G (All versions < V0.9.6). The OpenV2G EXI parsing feature is missing a length check when parsing X509 serial numbers. Thus, an attacker could introduce a buffer overflow that leads to memory corruption.

A buffer overflow was addressed with improved bounds checking. This issue is fixed in macOS Sequoia 15.4, macOS Sonoma 14.7.5, macOS Ventura 13.7.5. An app may be able to cause unexpected system termination.

DBI versions before 1.648 for Perl saved errors in a limited-sized buffer. Error messages that were returned when RaiseError, PrintError or HandleError were set were written to a 200-byte buffer without a length limit. Attackers that can influence the error text in an application can trigger a buffer overflow.

An issue was discovered in net/wireless/nl80211.c in the Linux kernel through 5.2.17. It does not check the length of variable elements in a beacon head, leading to a buffer overflow.

NetSarang XFTP Client 6.0149 and earlier version contains a buffer overflow vulnerability caused by improper boundary checks when copying file name from an attacker controlled FTP server. That leads attacker to execute arbitrary code by sending a crafted filename.

A heap-based buffer overflow vulnerability exists in the configuration server functionality of the Cosori Smart 5.8-Quart Air Fryer CS158-AF 1.1.0. A specially crafted JSON object can lead to remote code execution. An attacker can send a malicious packet to trigger this vulnerability.

A security flaw has been discovered in Totolink WA300 5.2cu.7112_B20190227. The affected element is the function loginauth of the file /cgi-bin/cstecgi.cgi of the component POST Request Handler. The manipulation of the argument http_host results in buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was found in osrg GoBGP up to 4.3.0. Affected is the function PathAttributeAigp.DecodeFromBytes of the file pkg/packet/bgp/bgp.go of the component AIGP Attribute Parser. Performing a manipulation results in buffer overflow. It is possible to initiate the attack remotely. Upgrading to version 4.4.0 is able to address this issue. The patch is named 51ad1ada06cb41ce47b7066799981816f50b7ced. The affected component should be upgraded.

A security flaw has been discovered in Totolink N300RH 3.2.4-B20220812. Affected by this vulnerability is the function loginauth of the file /cgi-bin/cstecgi.cgi of the component Parameter Handler. Performing a manipulation of the argument Password results in buffer overflow. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks.

A remote SEH buffer overflow has been discovered in IntraSrv 1.0 (2007-06-03). An attacker may send a crafted HTTP GET or HEAD request that can result in a compromise of the hosting system.

A weakness has been identified in D-Link DI-8100 16.07.26A1. Affected is the function sprintf of the file /auto_reboot.asp of the component HTTP Handler. This manipulation of the argument enable/time causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks.

A security vulnerability has been detected in D-Link DI-8100 16.07.26A1. Affected by this vulnerability is the function url_rule_asp of the file /url_rule.asp of the component POST Parameter Handler. Such manipulation leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used.

Tenda ac9 v1.0 firmware v15.03.05.19 contains a stack overflow vulnerability in /goform/SetOnlineDevName, which may lead to remote arbitrary code execution.

Tenda AC18 V15.03.05.19 is vulnerable to Buffer Overflow via function R7WebsSecurityHandler.

RE11S v1.11 was discovered to contain a stack overflow via the pppUserName parameter in the formPPPoESetup function.

The infocmp command-line tool in ncurses before 6.5-20251213 has a stack-based buffer overflow in analyze_string in progs/infocmp.c.

Tenda AC18 V15.03.05.19 is vulnerable to Buffer Overflow via function formSetWifiGuestBasic.

RE11S v1.11 was discovered to contain a stack overflow via the selSSID parameter in the formWlSiteSurvey function.