Missing SNI/ALPN binding on stateful (session-ID) resumption, which previously skipped the binding check performed for ticket-based resumption. A cached session could be resumed under a different SNI/ALPN than originally negotiated and, where client-authentication policy differs across virtual hosts, carry the cached peer-authentication state into a context it was not established for. Resumption now verifies the SNI/ALPN binding for all paths and declines (falling back to a full handshake) on mismatch.

In wolfSSL before 5.2.0, a TLS 1.3 server cannot properly enforce a requirement for mutual authentication. A client can simply omit the certificate_verify message from the handshake, and never present a certificate.

PKCS7_verify signer confusion allows forged signatures, where the signer associated with a signature is not correctly bound, permitting a forged signature to be accepted.

wolfssl before 3.2.0 does not properly authorize CA certificate for signing other certificates.

Out-of-bounds write in SetSuitesHashSigAlgo when processing an oversized signature algorithms list, allowing a write past the bounds of the destination buffer.

HMAC zero-length tag forgery in EVP_DigestVerifyFinal, where a zero-length tag could be accepted as valid during HMAC verification. In the OpenSSL-compatibility HMAC verify path the supplied signature length was only checked as not exceeding the MAC length, so a zero-length or otherwise truncated tag could pass verification. The fix requires the supplied tag length to exactly equal the MAC length and rejects a zero-length MAC, so a forged short or empty tag is no longer accepted.

wc_Blake2bHmacFinal and wc_Blake2sHmacFinal discard the message when the key length exceeds the block size, producing a MAC that is independent of the input. When the supplied key is longer than the BLAKE2 block size the key-hashing branch reinitialized the running hash state, discarding the accumulated message data, so the resulting MAC depended only on the key and not on the message being authenticated. This bug is specific to the HMAC-BLAKE2 APIs that were added in wolfSSL version 5.9.0.

iPAddress name constraints bypass when WOLFSSL_IP_ALT_NAME is not defined. IP address name constraints are not enforced in that configuration, allowing a certificate to bypass an issuing CA's IP address constraints.

X.509 name constraint bypass via the Subject Common Name when treated as a DNS-type name. A certificate whose Subject CN violates an issuing CA's DNS name constraints could be accepted.

Heap buffer overflow in CertFromX509 via AuthorityKeyIdentifier size confusion. A heap buffer overflow occurs when converting an X.509 certificate internally due to incorrect size handling of the AuthorityKeyIdentifier extension.

An integer overflow existed in the wolfCrypt CMAC implementation, that could be exploited to forge CMAC tags. The function wc_CmacUpdate used the guard `if (cmac->totalSz != 0)` to skip XOR-chaining on the first block (where digest is all-zeros and the XOR is a no-op). However, totalSz is word32 and wraps to zero after 2^28 block flushes (4 GiB), causing the guard to erroneously discard the live CBC-MAC chain state. Any two messages sharing a common suffix beyond the 4 GiB mark then produce identical CMAC tags, enabling a zero-work prefix-substitution forgery. The fix removes the guard, making the XOR unconditional; the no-op property on the first block is preserved because digest is zero-initialized by wc_InitCmac_ex.

Un-negotiated Raw Public Key (RFC 7250) accepted in place of an X.509 certificate, bypassing chain validation. A raw public key has no chain, so ParseCertRelative() accepts it without performing any trust verification; it must therefore only be accepted when RPK was actually negotiated for that peer. The check now defaults the expected type to X.509 (per RFC 7250/8446) when no type was negotiated, comparing against the received server certificate type on the client and the selected client certificate type on the server, and rejects any mismatch, including an un-negotiated raw public key, with UNSUPPORTED_CERTIFICATE. Only affects builds with Raw Public Key support (HAVE_RPK) enabled - disabled by default in a standalone build, but included in --enable-all.

wolfSSL_PKCS7_verify() returning success for a degenerate (certs-only) PKCS#7 object that contains no signer. Such an object has empty signerInfos, so the underlying signed-data verification succeeds without authenticating any content. The compatibility-layer verify path now rejects the object when no signer signature has actually been verified, so a PKCS#7 carrying no valid signature is no longer reported as verified. This is enforced regardless of the PKCS7_NOVERIFY flag, which only suppresses signer certificate chain validation and was never intended to waive the requirement that a signature exist. Only affects OpenSSL compatibility builds that call the PKCS7_verify() compatibility API on potentially degenerate PKCS#7 bundles.

wolfssl before 3.2.0 does not properly issue certificates for a server's hostname.

wolfSSL before 3.11.0 does not prevent wc_DhAgree from accepting a malformed DH key.

An issue was discovered in the DTLS handshake implementation in wolfSSL before 4.5.0. Clear DTLS application_data messages in epoch 0 do not produce an out-of-order error. Instead, these messages are returned to the application.

In wolfSSL 5.8.2 and earlier, a logic flaw existed in the TLS 1.2 server state machine implementation. The server could incorrectly accept the CertificateVerify message before the ClientKeyExchange message had been received. This issue affects wolfSSL before 5.8.4 (wolfSSL 5.8.2 and earlier is vulnerable, 5.8.4 is not vulnerable). In 5.8.4 wolfSSL would detect the issue later in the handshake. 5.9.0 was further hardened to catch the issue earlier in the handshake.

X.509 trust-chain bypass (path-depth exhaustion) in the OpenSSL compatibility certificate verifier (wolfSSL_X509_verify_cert()). This affects only builds with --enable-opensslextra whose application calls X509_verify_cert() with caller-supplied untrusted intermediates; for those users it is critical, otherwise the library is unaffected. Native wolfSSL TLS/DTLS usage is not impacted. X509_verify_cert() returned success based only on the last verified link rather than on reaching a trust anchor: when the supplied chain is deeper than the verifier's maximum path depth (default 100), path building runs out of depth while still walking untrusted intermediates and the chain is accepted even though it never reaches a configured trust anchor, allowing acceptance of an attacker-controlled certificate. The default TLS handshake (WOLFSSL_VERIFY_PEER) is not affected; only applications doing manual or deferred verification through this API are.

X.509 trust-chain bypass in the OpenSSL compatibility certificate verifier (wolfSSL_X509_verify_cert()). This affects only builds with --enable-opensslextra (OPENSSL_EXTRA) and whose application validates certificates by calling X509_verify_cert() with caller-supplied untrusted intermediate certificates; for those users it is critical, otherwise the library is unaffected. In particular, native wolfSSL TLS/DTLS usage is not impacted. wolfSSL's X509_verify_cert() temporarily loads each caller-supplied untrusted intermediate into the certificate manager but failed to drop them before the trusted-store check, so an untrusted intermediate could anchor the path itself. An attacker can present a chain that never reaches a configured trust anchor and have it accepted, resulting in acceptance of an attacker-controlled certificate. This is certificate verification independent of TLS (e.g. S/MIME/CMS, code/firmware signing, JWT/JWS x5c), is not specific to any key type or algorithm, and a single untrusted intermediate suffices. The default wolfSSL TLS handshake (WOLFSSL_VERIFY_PEER) is not affected; only TLS applications doing manual or deferred peer verification through this API are, which also requires --enable-sessioncerts.

TLS 1.3 post-handshake authentication (PHA) issue where a server could accept a client's Finished message without the client having sent a Certificate and CertificateVerify. The post-handshake-auth exemption that allows an empty/absent peer certificate was only intended for the initial handshake, but it was also being applied while a post-handshake CertificateRequest was still outstanding. The check is now scoped to the initial handshake only: on the server, once a post-handshake CertificateRequest has been sent (certReqCtx is set), a peer certificate and a valid CertificateVerify are required again before the Finished is accepted, with empty-certificate handling following the configured verify mode (FAIL_IF_NO_PEER_CERT) just as during first-handshake client authentication. Only affects TLS 1.3 servers built with post-handshake authentication support (WOLFSSL_POST_HANDSHAKE_AUTH / --enable-postauth, included in --enable-all) that enable WOLFSSL_VERIFY_POST_HANDSHAKE and request a client certificate after the handshake via wolfSSL_request_certificate(). Clients, and servers that do not use post-handshake authentication, are unaffected.

An issue was discovered in Mattermost Server before 5.9.0, 5.8.1, 5.7.3, and 4.10.8. It allows a password reset to proceed while an e-mail address is being changed.

A vulnerability in the session identification management functionality of the web-based interface of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to hijack a valid user session on an affected system. The vulnerability exists because the affected software does not properly clear previously assigned session identifiers for a user session when a user authenticates to the web-based interface. An attacker could exploit this vulnerability by using an existing session identifier to connect to the software through the web-based interface. Successful exploitation could allow the attacker to hijack an authenticated user's browser session on the system. Versions 8.1 and 8.5 are affected.

The ConnectionExists function in lib/url.c in libcurl before 7.47.0 does not properly re-use NTLM-authenticated proxy connections, which might allow remote attackers to authenticate as other users via a request, a similar issue to CVE-2014-0015.

An issue was discovered on Samsung mobile devices with O(8.x) and P(9.0) software. Attackers can change the USB configuration without authentication. The Samsung ID is SVE-2018-13300 (September 2019).

An issue was discovered on Samsung mobile devices with P(9.0) software. The Settings application allows unauthenticated changes. The Samsung IDs are SVE-2019-13814, SVE-2019-13815 (March 2019).

In jpv (aka Json Pattern Validator) before 2.1.1, compareCommon() can be bypassed because certain internal attributes can be overwritten via a conflicting name, as demonstrated by 'constructor': {'name':'Array'}. This affects validate(). Hence, a crafted payload can overwrite this builtin attribute to manipulate the type detection result.

MFScripts YetiShare v3.5.2 through v4.5.4 might allow an attacker to reset a password by using a leaked hash (the hash never expires until used).

Memos is a privacy-first, lightweight note-taking service that uses Access Tokens to authenticate application access. When a user changes their password, the existing list of Access Tokens stay valid instead of expiring. If a user finds that their account has been compromised, they can update their password. In versions up to and including 0.18.1, though, the bad actor will still have access to their account because the bad actor's Access Token stays on the list as a valid token. The user will have to manually delete the bad actor's Access Token to secure their account. The list of Access Tokens has a generic Description which makes it hard to pinpoint a bad actor in a list of Access Tokens. A known patched version of Memos isn't available. To improve Memos security, all Access Tokens will need to be revoked when a user changes their password. This removes the session for all the user's devices and prompts the user to log in again. One can treat the old Access Tokens as "invalid" because those Access Tokens were created with the older password.

upload.php in Truegalerie 1.0 allows remote attackers to read arbitrary files by specifying the target filename in the file cookie in form.php, then downloading the file from the image gallery.

A vulnerability classified as critical has been found in SourceCodester Employee Task Management System 1.0. Affected is an unknown function of the file changePasswordForEmployee.php. The manipulation leads to improper authentication. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-221454 is the identifier assigned to this vulnerability.

QNAP NAS application Proxy Server through version 1.2.0 does not authenticate requests properly. Successful exploitation can lead to change of the settings of Proxy Server.

The WordPress plugin, Email Subscribers & Newsletters, before 4.2.3 had a flaw that allowed for unauthenticated option creation. In order to exploit this vulnerability, an attacker would need to send a /wp-admin/admin-post.php?es_skip=1&option_name= request.

A vulnerability in the protocol detection component of Cisco Firepower Threat Defense Software, Cisco FirePOWER Services Software for ASA, and Cisco Firepower Management Center Software could allow an unauthenticated, remote attacker to bypass filtering protections. The vulnerability is due to improper detection of the initial use of a protocol on a nonstandard port. An attacker could exploit this vulnerability by sending traffic on a nonstandard port for the protocol in use through an affected device. An exploit could allow the attacker to bypass filtering and deliver malicious requests to protected systems that would otherwise be blocked. Once the initial protocol flow on the nonstandard port is detected, future flows on the nonstandard port will be successfully detected and handled as configured by the applied policy.

Frams's Fast File EXchange (F*EX, aka fex) 20100208, and possibly other versions before 20110610, allows remote attackers to bypass authentication and upload arbitrary files via a request that lacks an authentication ID.

The OpenID Single Sign-On authentication functionality in OXID eShop before 4.5.0 allows remote attackers to impersonate users via the email address in a crafted authentication token.

An issue was discovered in Serpico (aka SimplE RePort wrIting and CollaboratiOn tool) 1.3.0. An admin can change their password without providing the current password, by using interfaces outside the Change Password screen. Thus, requiring the admin to enter an Old Password value on the Change Password screen does not enhance security. This is problematic in conjunction with XSS.

A vulnerability in Cisco IOS 15.5(3)M Software for Cisco CallManager Express (CME) could allow an unauthenticated, remote attacker to make unauthorized phone calls. The vulnerability is due to a configuration restriction in the toll-fraud protections component of the affected software. An attacker could exploit this vulnerability to place unauthorized, long-distance phone calls by using an affected system. Cisco Bug IDs: CSCuy40939.

IBM Storage Scale Container Native Storage Access 5.1.2.1 -through 5.1.7.0 could allow an attacker to initiate connections to containers from external networks. IBM X-Force ID: 237812.

Broken access controls on PDFtron WebviewerUI in M-Files Hubshare before 3.3.11.3 allows unauthenticated attackers to upload malicious files to the application server.

Polar HelpDesk 3.0 allows remote attackers to bypass authentication by setting the UserId and UserType values in a cookie.

A vulnerability in access control list (ACL) functionality of the Gigabit Ethernet Management interface of Cisco IOS XE Software could allow an unauthenticated, remote attacker to reach the configured IP addresses on the Gigabit Ethernet Management interface. The vulnerability is due to a logic error that was introduced in the Cisco IOS XE Software 16.1.1 Release, which prevents the ACL from working when applied against the management interface. An attacker could exploit this issue by attempting to access the device via the management interface.

A vulnerability has been identified in SPPA-T3000 Application Server (All versions < Service Pack R8.2 SP2). An attacker with network access to the Application Server could be able to upload arbitrary files without authentication. Please note that an attacker needs to have network access to the Application Server in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.

An issue was discovered in Mattermost Server before 3.7.0 and 3.6.3. Attackers can use the API for unauthenticated team creation.

Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior to versions 4.10.11 and 5.2.2, the certificate in the Parse Server Apple Game Center auth adapter not validated. As a result, authentication could potentially be bypassed by making a fake certificate accessible via certain Apple domains and providing the URL to that certificate in an authData object. Versions 4.0.11 and 5.2.2 prevent this by introducing a new `rootCertificateUrl` property to the Parse Server Apple Game Center auth adapter which takes the URL to the root certificate of Apple's Game Center authentication certificate. If no value is set, the `rootCertificateUrl` property defaults to the URL of the current root certificate as of May 27, 2022. Keep in mind that the root certificate can change at any time and that it is the developer's responsibility to keep the root certificate URL up-to-date when using the Parse Server Apple Game Center auth adapter. There are no known workarounds for this issue.

The OAuth client Single Sign On WordPress plugin before 3.0.4 does not have authorisation and CSRF when updating its settings, which could allow unauthenticated attackers to update them and change the OAuth endpoints to ones they controls, allowing them to then be authenticated as admin if they know the correct email address

Browsing the admin.html page allows the user to reset the admin password. Also appears in the JS code for the password.

OPC UA .NET Standard Stack allows a remote attacker to bypass the application authentication check via crafted fake credentials.

Auth0 auth0.net before 6.5.4 has Incorrect Access Control because IdentityTokenValidator can be accidentally used to validate untrusted ID tokens.

Magento Community Edition (CE) 1.9.1.0 and Enterprise Edition (EE) 1.14.1.0 allow remote attackers to bypass authentication via the forwarded parameter.

Webservice-DIC yoyaku_v41 allows remote attackers to bypass authentication and complete a conference-room reservation via unspecified vectors, as demonstrated by an "unintentional reservation."