Multiple buffer overflows in the web interface on the D-Link DI-524 router allow remote attackers to cause a denial of service (device crash) or possibly have unspecified other impact via (1) a long username or (2) an HTTP header with a large name and an empty value.

Netgear RP114, and possibly other versions and devices, allows remote attackers to cause a denial of service via a SYN flood attack between one system on the internal interface and another on the external interface, which temporarily stops routing between the interfaces, as demonstrated using nmap.

Cisco TelePresence Server 3.1 on 7010, Mobility Services Engine (MSE) 8710, Multiparty Media 310 and 320, and Virtual Machine (VM) devices allows remote attackers to cause a denial of service (device reload) via malformed STUN packets, aka Bug ID CSCuv01348.

On D-Link DIR-823G 2018-09-19 devices, the GoAhead configuration allows /HNAP1 RunReboot commands without authentication to trigger a reboot.

Cisco NX-OS 4.0 through 6.1 on Nexus 1000V 3000, 4000, 5000, 6000, and 7000 devices and Unified Computing System (UCS) platforms allows remote attackers to cause a denial of service (TCP stack reload) by sending crafted TCP packets to a device that has a TIME_WAIT TCP session, aka Bug ID CSCub70579.

Cisco IOS 15.0 through 15.5 and IOS XE 3.3 through 3.16 allow remote attackers to cause a denial of service (device reload) via a crafted DHCPv6 Relay message, aka Bug ID CSCus55821.

The Smart Install client implementation in Cisco IOS 12.2, 15.0, and 15.2 and IOS XE 3.2 through 3.7 allows remote attackers to cause a denial of service (device reload) via crafted image list parameters in a Smart Install packet, aka Bug ID CSCuv45410.

NETGEAR NMS300 devices before 1.6.0.27 are affected by denial of service.

D-Link DIR-619 Ax v1.00 was discovered to contain a stack overflow in the function formSetWanNonLogin. This vulnerability allows attackers to cause a Denial of Service (DoS) via the curTime parameter.

D-Link DIR-619 Ax v1.00 was discovered to contain a stack overflow in the function formSetWanPPPoE. This vulnerability allows attackers to cause a Denial of Service (DoS) via the curTime parameter.

Unspecified vulnerability in the Web manager implementation on D-Link Japan DES-3800 devices with firmware before R4.50B58 allows remote attackers to cause a denial of service (device hang) via unknown vectors, a different vulnerability than CVE-2013-5997.

A denial-of-service attack in WPA2, and WPA3-SAE authentication methods in D-Link DIR-X1560, v1.04B04, and DIR-X6060, v1.11B04 allows a remote unauthenticated attacker to disconnect a wireless client via sending specific spoofed SAE authentication frames.

On D-Link DIR-605L devices, firmware before 2.08UIBetaB01.bin allows an unauthenticated GET request to trigger a reboot.

Netgear FVG318 running firmware 1.0.40 allows remote attackers to cause a denial of service (router reset) via TCP packets with bad checksums.

Netgear FM114P firmware 1.3 wireless firewall allows remote attackers to cause a denial of service (crash or hang) via a large number of TCP connection requests.

A vulnerability classified as critical was found in D-Link DI-7003GV2 24.04.18D1 R(68125). This vulnerability affects the function sub_4983B0 of the file /H5/backup.asp?opt=reset of the component Factory Reset Handler. The manipulation leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

An issue was discovered in /bin/goahead on D-Link DIR-823G devices with the firmware 1.02B03. There is incorrect access control allowing remote attackers to reset the router without authentication via the SetFactoryDefault HNAP API. Consequently, an attacker can achieve a denial-of-service attack without authentication.

A Broken Access Control vulnerability in the D-Link DSL-2680 web administration interface (Firmware EU_1.03) allows an attacker to reboot the router by submitting a reboot.html GET request without being authenticated on the admin interface.

cgi-bin/welcome/VPN_only in the web interface in Netgear SSL312 allows remote attackers to cause a denial of service (device crash) via a crafted query string, as demonstrated using directory traversal sequences.

The D-Link DIR-816 A2 1.11 router only checks the random token when authorizing a goform request. An attacker can get this token from dir_login.asp and use an API URL /goform/LoadDefaultSettings to reset the router without authentication.

The web management interface in Netgear WGR614v9 allows remote attackers to cause a denial of service (crash) via a request that contains a question mark ("?").

An issue was discovered on D-Link DIR-605L Model B before FW2.11betaB06_hbrf devices, related to the code that handles the authentication values for HNAP. An attacker can cause a denial of service (device crash) or possibly have unspecified other impact by sending a sufficiently long string in the password field of the HTTP Basic Authentication section of the HTTP request.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, has been found in D-Link DIR-600M C1 3.08. Affected by this issue is some unknown functionality of the component Telnet Service. The manipulation of the argument username leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-254576. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

A vulnerability has been found in D-Link DIR-823X 240126/240802 and classified as critical. Affected by this vulnerability is the function FUN_00412244. The manipulation leads to null pointer dereference. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

D-Link DCS-825L devices with firmware 1.08 do not employ a suitable mechanism to prevent denial-of-service (DoS) attacks. An attacker can harm the device availability (i.e., live-online video/audio streaming) by using the hping3 tool to perform an IPv4 flood attack. Verified attacks includes SYN flooding, UDP flooding, ICMP flooding, and SYN-ACK flooding.

The administrative web interface on the Netgear DG632 with firmware 3.4.0_ap allows remote attackers to cause a denial of service (web outage) via an HTTP POST request to cgi-bin/firmwarecfg.

NETGEAR ProSafe GS724Tv3 and GS716Tv2 with firmware 5.4.1.13 and earlier, GS748Tv4 5.4.1.14, and GS510TP 5.0.4.4 allows remote attackers to cause a denial of service (reboot or crash) via a crafted HTTP request to filesystem/.

NetGear WNDR4700 Media Server devices with firmware 1.0.0.34 allow remote attackers to cause a denial of service (device crash).

A vulnerability was found in D-Link DIR-605L 2.13B01. It has been classified as critical. This affects the function formResetStatistic of the file /goform/formResetStatistic. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DI-8003 16.07.16A1. It has been declared as critical. Affected by this vulnerability is the function upgrade_filter_asp of the file /upgrade_filter.asp. The manipulation of the argument path leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DI-8003 16.07.16A1. It has been rated as critical. Affected by this issue is the function dbsrv_asp of the file /dbsrv.asp. The manipulation of the argument str leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

D-Link DIR-615 devices have a buffer overflow via a long Authorization HTTP header.

A vulnerability has been found in Netgear R6900P and R7000P 1.3.3.154 and classified as critical. Affected by this vulnerability is the function sub_16C4C of the component HTTP Header Handler. The manipulation of the argument Host leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in Netgear R6900 1.0.1.26_1.0.20. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file upgrade_check.cgi of the component HTTP Header Handler. The manipulation of the argument Content-Length leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-605L 2.13B01. It has been declared as critical. This vulnerability affects the function formSetPortTr of the file /goform/formSetPortTr. The manipulation of the argument curTime leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as an 'unset' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'unset <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

Stack-based buffer overflow in dws/api/Login on D-Link DIR-850L B1 2.07 before 2.07WWB05, DIR-817 Ax, DIR-818LW Bx before 2.05b03beta03, DIR-822 C1 3.01 before 3.01WWb02, DIR-823 A1 1.00 before 1.00WWb05, DIR-895L A1 1.11 before 1.11WWb04, DIR-890L A1 1.09 before 1.09b14, DIR-885L A1 1.11 before 1.11WWb07, DIR-880L A1 1.07 before 1.07WWb08, DIR-868L B1 2.03 before 2.03WWb01, and DIR-868L C1 3.00 before 3.00WWb01 devices allows remote attackers to execute arbitrary code via a long session cookie.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'commit' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'commit <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'read' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'read <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'staticGet' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'staticGet <node_name attr>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'show' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'show <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

Stack-based buffer overflow in the SelectDirectory method in DcsCliCtrl.dll in Camera Stream Client ActiveX Control, as used in D-Link DCS-5605 PTZ IP Network Camera, allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via a long string argument.

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The binary rtspd in /sbin folder of the device handles all the rtsp connections received by the device. It seems that the binary performs a memcpy operation at address 0x00011E34 with the value sent in the "Authorization: Basic" RTSP header and stores it on the stack. The number of bytes to be copied are calculated based on the length of the string sent in the RTSP header by the client. As a result, memcpy copies more data then it can hold on stack and this results in corrupting the registers for the caller function sub_F6CC which results in memory corruption. The severity of this attack is enlarged by the fact that the same value is then copied on the stack in the function 0x00011378 and this allows to overflow the buffer allocated and thus control the PC register which will result in arbitrary code execution on the device.

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The binary orthrus in /sbin folder of the device handles all the UPnP connections received by the device. It seems that the binary performs a sprintf operation at address 0x0000A3E4 with the value in the command line parameter "-f" and stores it on the stack. Since there is no length check, this results in corrupting the registers for the function sub_A098 which results in memory corruption.

Multiple D-Link devices including the DIR-850L firmware versions 1.14B07 and 2.07.B05 contain a stack-based buffer overflow vulnerability in the web administration interface HNAP service.

mini_httpd 1.21 and earlier allows remote attackers to obtain sensitive information from process memory via an HTTP request with a long protocol string, which triggers an incorrect response size calculation and an out-of-bounds read.

The htpasswd implementation of mini_httpd before v1.28 and of thttpd before v2.28 is affected by a buffer overflow that can be exploited remotely to perform code execution.

D-Link EyeOn Baby Monitor (DCS-825L) 1.08.1 has a remote code execution vulnerability. A UDP "Discover" service, which provides multiple functions such as changing the passwords and getting basic information, was installed on the device. A remote attacker can send a crafted UDP request to finderd to perform stack overflow and execute arbitrary code with root privilege on the device.

A weakness has been identified in D-Link DI-8400 16.07.26A1. The affected element is the function yyxz_dlink_asp of the file /yyxz.asp. This manipulation of the argument ID causes stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be exploited.

A vulnerability was found in D-Link DIR-513 1.0. It has been rated as critical. This issue affects the function formLanguageChange of the file /goform/formLanguageChange of the component HTTP POST Request Handler. The manipulation of the argument curTime leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.