An issue was discovered on D-Link DIR-605L Model B before FW2.11betaB06_hbrf devices, related to the code that handles the authentication values for HNAP. An attacker can cause a denial of service (device crash) or possibly have unspecified other impact by sending a sufficiently long string in the password field of the HTTP Basic Authentication section of the HTTP request.

Unspecified vulnerability in the Web manager implementation on D-Link Japan DES-3800 devices with firmware before R4.50B58 allows remote attackers to cause a denial of service (device hang) via unknown vectors, a different vulnerability than CVE-2013-5997.

A denial-of-service attack in WPA2, and WPA3-SAE authentication methods in D-Link DIR-X1560, v1.04B04, and DIR-X6060, v1.11B04 allows a remote unauthenticated attacker to disconnect a wireless client via sending specific spoofed SAE authentication frames.

Buffer overflow in ACME micro_httpd, as used in D-Link DSL2750U and DSL2740U and NetGear WGR614 and MR-ADSL-DG834 routers allows remote attackers to cause a denial of service (crash) via a long string in the URI in a GET request.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, has been found in D-Link DIR-600M C1 3.08. Affected by this issue is some unknown functionality of the component Telnet Service. The manipulation of the argument username leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-254576. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

A Broken Access Control vulnerability in the D-Link DSL-2680 web administration interface (Firmware EU_1.03) allows an attacker to reboot the router by submitting a reboot.html GET request without being authenticated on the admin interface.

The D-Link DIR-816 A2 1.11 router only checks the random token when authorizing a goform request. An attacker can get this token from dir_login.asp and use an API URL /goform/LoadDefaultSettings to reset the router without authentication.

D-Link DCS-825L devices with firmware 1.08 do not employ a suitable mechanism to prevent denial-of-service (DoS) attacks. An attacker can harm the device availability (i.e., live-online video/audio streaming) by using the hping3 tool to perform an IPv4 flood attack. Verified attacks includes SYN flooding, UDP flooding, ICMP flooding, and SYN-ACK flooding.

A vulnerability classified as critical was found in D-Link DI-7003GV2 24.04.18D1 R(68125). This vulnerability affects the function sub_4983B0 of the file /H5/backup.asp?opt=reset of the component Factory Reset Handler. The manipulation leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

D-Link DIR-619 Ax v1.00 was discovered to contain a stack overflow in the function formSetWanPPPoE. This vulnerability allows attackers to cause a Denial of Service (DoS) via the curTime parameter.

On D-Link DIR-823G 2018-09-19 devices, the GoAhead configuration allows /HNAP1 RunReboot commands without authentication to trigger a reboot.

D-Link DIR-619 Ax v1.00 was discovered to contain a stack overflow in the function formSetWanNonLogin. This vulnerability allows attackers to cause a Denial of Service (DoS) via the curTime parameter.

Multiple buffer overflows in the web interface on the D-Link DI-524 router allow remote attackers to cause a denial of service (device crash) or possibly have unspecified other impact via (1) a long username or (2) an HTTP header with a large name and an empty value.

An issue was discovered in /bin/goahead on D-Link DIR-823G devices with the firmware 1.02B03. There is incorrect access control allowing remote attackers to reset the router without authentication via the SetFactoryDefault HNAP API. Consequently, an attacker can achieve a denial-of-service attack without authentication.

A hard-coded password vulnerability exists in the Zebra IP Routing Manager functionality of D-LINK DIR-3040 1.13B03. A specially crafted network request can lead to a denial of service. An attacker can send a sequence of requests to trigger this vulnerability.

D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices allow remote attackers to cause a denial of service (daemon crash) via crafted LAN traffic.

An issue was discovered on D-Link DIR-816 A1 1.06 devices. An attacker could access management pages of the router via a client that ignores the 'top.location.href = "/dir_login.asp"' line in a .asp file. This provides access to d_status.asp, version.asp, d_dhcptbl.asp, and d_acl.asp.

On D-Link DAP-1530 (A1) before firmware version 1.06b01, DAP-1610 (A1) before firmware version 1.06b01, DWR-111 (A1) before firmware version 1.02v02, DWR-116 (A1) before firmware version 1.06b03, DWR-512 (B1) before firmware version 2.02b01, DWR-711 (A1) through firmware version 1.11, DWR-712 (B1) before firmware version 2.04b01, DWR-921 (A1) before firmware version 1.02b01, and DWR-921 (B1) before firmware version 2.03b01, there exists an EXCU_SHELL file in the web directory. By sending a GET request with specially crafted headers to the /EXCU_SHELL URI, an attacker could execute arbitrary shell commands in the root context on the affected device. Other devices might be affected as well.

A security issue exists in D-Link D-View 8 v2.0.2.89 and prior that could allow an attacker to manipulate the probe inventory of the D-View service. This could result in the disclosure of information from other probes, denial of service conditions due to the probe inventory becoming full, or the execution of tasks on other probes.

An issue was discovered on D-Link DSR-250 3.17 devices. Certain functionality in the Unified Services Router web interface could allow an authenticated attacker to execute arbitrary commands, due to a lack of validation of inputs provided in multipart HTTP POST requests.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, has been found in D-Link DAR-7000 up to 20151231. This issue affects some unknown processing of the file /log/webmailattach.php. The manipulation of the argument table_name leads to an unknown weakness. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-240239. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

D-Link DIR-130 firmware version 1.23 and DIR-330 firmware version 1.12 are vulnerable to authentication bypass of the remote login page. A remote attacker that can access the remote management login page can manipulate the POST request in such a manner as to access some administrator-only pages such as tools_admin.asp without credentials.

A lack of input validation and access controls in Lua CGIs on D-Link DSR VPN routers may result in arbitrary input being passed to system command APIs, resulting in arbitrary command execution with root privileges. This affects DSR-150, DSR-250, DSR-500, and DSR-1000AC with firmware 3.14 and 3.17.

The Traffic Management Microkernel (TMM) in F5 BIG-IP LTM, APM, ASM, Edge Gateway, GTM, Link Controller, and WOM 10.0.0 through 10.2.2 and 11.0.0; Analytics 11.0.0; PSM 9.4.0 through 9.4.8, 10.0.0 through 10.2.4, and 11.0.0 through 11.4.1; and WebAccelerator 9.4.0 through 9.4.8, 10.0.0 through 10.2.4, and 11.0.0 through 11.3.0 might change a TCP connection to the ESTABLISHED state before receiving the ACK packet, which allows remote attackers to cause a denial of service (SIGFPE or assertion failure and TMM restart) via unspecified vectors.

Microsoft .NET Framework 4.6, 4.6.1, 4.6.2, and 4.7 allow an attacker to send specially crafted requests to a .NET web application, resulting in denial of service, aka .NET Denial of Service Vulnerability.

In Wireshark 2.2.0 to 2.2.6 and 2.0.0 to 2.0.12, the openSAFETY dissector could crash or exhaust system memory. This was addressed in epan/dissectors/packet-opensafety.c by checking for a negative length.

Cisco IOS XE 3.4 before 3.4.2S and 3.5 before 3.5.1S on 1000 ASR devices allows remote attackers to cause a denial of service (device reload) via malformed ICMP error packets associated with a (1) TCP or (2) UDP session that is under inspection by the Zone-Based Firewall (ZBFW) component, aka Bug ID CSCtt26470.

The T1/E1 driver-queue functionality in Cisco IOS 12.2 and 15.0 through 15.3, when an HDLC32 driver is used, allows remote attackers to cause a denial of service (interface queue wedge) via bursty network traffic, aka Bug ID CSCub67465.

The DNS-over-TCP implementation in Cisco IOS 12.2 and 15.0 through 15.3, when NAT is used, allows remote attackers to cause a denial of service (device reload) via a crafted IPv4 DNS TCP stream, aka Bug ID CSCuf28733.

In Wireshark 2.2.0 to 2.2.6, the IPv6 dissector could crash. This was addressed in epan/dissectors/packet-ipv6.c by validating an IPv6 address.

The Binary File Descriptor (BFD) library (aka libbfd), as distributed in GNU Binutils 2.28, is vulnerable to an invalid read of size 1 because the existing reloc offset range tests didn't catch small negative offsets less than the size of the reloc field. This vulnerability causes programs that conduct an analysis of binary programs using the libbfd library, such as objdump, to crash.

In Wireshark 2.2.0 to 2.2.6 and 2.0.0 to 2.0.12, the RGMP dissector could crash. This was addressed in epan/dissectors/packet-rgmp.c by validating an IPv4 address.

Triangle Research International (aka Tri) Nano-10 PLC devices with firmware r81 and earlier do not properly handle large length values in MODBUS data, which allows remote attackers to cause a denial of service (transition to the interrupt state) via a crafted packet to TCP port 502.

If a long user name is used in a username/password combination in a site URL (such as " http://UserName:Password@example.com"), the resulting modal prompt will hang in a non-responsive state or crash, causing a denial of service. This vulnerability affects Firefox < 55.

Huawei firewall products USG9500 V500R001C50 has a DoS vulnerability.A remote attacker who controls the peer device could exploit the vulnerability by sending malformed IKE packets to the target device. Successful exploit of the vulnerability could cause the device to restart.

AC6005 V200R006C10SPC200,AC6605 V200R006C10SPC200,AR1200 with software V200R005C10CP0582T, V200R005C10HP0581T, V200R005C20SPC026T,AR200 with software V200R005C20SPC026T,AR3200 V200R005C20SPC026T,CloudEngine 12800 with software V100R003C00, V100R005C00, V100R005C10, V100R006C00, V200R001C00,CloudEngine 5800 with software V100R003C00, V100R005C00, V100R005C10, V100R006C00, V200R001C00,CloudEngine 6800 with software V100R003C00, V100R005C00, V100R005C10, V100R006C00, V200R001C00,CloudEngine 7800 with software V100R003C00, V100R005C00, V100R005C10, V100R006C00, V200R001C00,CloudEngine 8800 with software V100R006C00, V200R001C00,E600 V200R008C00,S12700 with software V200R005C00, V200R006C00, V200R007C00, V200R008C00,S1700 with software V100R006C00, V100R007C00, V200R006C00,S2300 with software V100R005C00, V100R006C00, V100R006C03, V100R006C05, V200R003C00, V200R003C02, V200R003C10, V200R005C00, V200R005C01, V200R005C02, V200R005C03, V200R006C00, V200R007C00, V200R008C00,S2700 with software V100R005C00, V100R006C00, V100R006C03, V100R006C05, V200R003C00, V200R003C02, V200R003C10, V200R005C00, V200R005C01, V200R005C02, V200R005C03, V200R006C00, V200R007C00, V200R008C00,S5300 with software V100R005C00, V100R006C00, V100R006C01, V200R001C00, V200R001C01, V200R002C00, V200R003C00, V200R003C02, V200R003C10, V200R005C00, V200R006C00, V200R007C00, V200R008C00,S5700 with software V100R005C00, V100R006C00, V100R006C01, V200R001C00, V200R001C01, V200R002C00, V200R003C00, V200R003C02, V200R003C10, V200R005C00, V200R006C00, V200R007C00, V200R008C00,S6300 with software V100R006C00, V200R001C00, V200R001C01, V200R002C00, V200R003C00, V200R003C02, V200R003C10, V200R005C00, V200R008C00,S6700 with software V100R006C00, V200R001C00, V200R001C01, V200R002C00, V200R003C00, V200R003C02, V200R003C10, V200R005C00, V200R006C00, V200R007C00, V200R008C00,S7700 with software V100R003C00, V100R006C00, V200R001C00, V200R001C01, V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007C00, V200R008C00,S9300 with software V100R001C00, V100R002C00, V100R003C00, V100R006C00, V200R001C00, V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007C00, V200R008C00, V200R008C10,S9700 with software V200R001C00, V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007C00, V200R008C00,Secospace USG6600 V500R001C00SPC050 have a MaxAge LSA vulnerability due to improper OSPF implementation. When the device receives special LSA packets, the LS (Link Status) age would be set to MaxAge, 3600 seconds. An attacker can exploit this vulnerability to poison the route table and launch a DoS attack.

EMC AppSync host plug-in versions 3.5 and below (Windows platform only) includes a denial of service (DoS) vulnerability that could potentially be exploited by malicious users to compromise the affected system.

The NFSv2/NFSv3 server in the nfsd subsystem in the Linux kernel through 4.10.11 allows remote attackers to cause a denial of service (system crash) via a long RPC reply, related to net/sunrpc/svc.c, fs/nfsd/nfs3xdr.c, and fs/nfsd/nfsxdr.c.

Moxa MXView 2.8 allows remote attackers to cause a Denial of Service by sending overly long junk payload for the MXView client login credentials.

OpenVPN version 2.3.12 and newer is vulnerable to unauthenticated Denial of Service of server via received large control packet. Note that this issue is fixed in 2.3.15 and 2.4.2.

An issue was discovered in EMC ScaleIO 2.0.1.x. A vulnerability in message parsers (MDM, SDS, and LIA) could potentially allow an unauthenticated remote attacker to send specifically crafted packets to stop ScaleIO services and cause a denial of service situation.

There is a DOS attack vulnerability in Apache Traffic Server (ATS) 5.2.0 to 5.3.2, 6.0.0 to 6.2.0, and 7.0.0 with the TLS handshake. This issue can cause the server to coredump.

iSmartAlarm cube devices allow Denial of Service. Sending a SYN flood on port 12345 will freeze the "cube" and it will stop responding.

An assertion-failure flaw was found in Qemu before 2.10.1, in the Network Block Device (NBD) server's initial connection negotiation, where the I/O coroutine was undefined. This could crash the qemu-nbd server if a client sent unexpected data during connection negotiation. A remote user or process could use this flaw to crash the qemu-nbd server resulting in denial of service.

In TigerVNC 1.7.1 (SSecurityPlain.cxx SSecurityPlain::processMsg), unauthenticated users can crash the server by sending long usernames.

On F5 BIG-IP systems running 13.0.0, 12.1.0 - 12.1.3.1, or 11.6.1 - 11.6.2, the BIG-IP ASM bd daemon may core dump memory under some circumstances when processing undisclosed types of data on systems with 48 or more CPU cores.

In Wireshark 2.2.0 to 2.2.4 and 2.0.0 to 2.0.10, there is a K12 file parser crash, triggered by a malformed capture file. This was addressed in wiretap/k12.c by validating the relationships between lengths and offsets.

The parse_char_class function in regparse.c in the Onigmo (aka Oniguruma-mod) regular expression library, as used in Ruby 2.4.0, allows remote attackers to cause a denial of service (deep recursion and application crash) via a crafted regular expression.

A vulnerability in the implementation of the H.264 protocol in Cisco Meeting Server (CMS) 2.1.4 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected system. The vulnerability exists because the affected application does not properly validate Fragmentation Unit (FU-A) protocol packets. An attacker could exploit this vulnerability by sending a crafted H.264 FU-A packet through the affected application. A successful exploit could allow the attacker to cause a DoS condition on the affected system due to an unexpected restart of the CMS media process on the system. Although the CMS platform continues to operate and only the single, affected CMS media process is restarted, a brief interruption of media traffic for certain users could occur. Cisco Bug IDs: CSCve10131.

In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, GTM, Link Controller, PEM and WebSafe software version 13.0.0 and 12.1.0 - 12.1.2, malicious requests made to virtual servers with an HTTP profile can cause the TMM to restart. The issue is exposed with BIG-IP APM profiles, regardless of settings. The issue is also exposed with the non-default "normalize URI" configuration options used in iRules and/or BIG-IP LTM policies.