An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides a web user interface that allows a user to manage the device. As a part of the functionality the device firmware file contains a file known as relay.sh which allows the device to create relay ports and connect the device to Vera servers. This is primarily used as a method of communication between the device and Vera servers so the devices can be communicated with even when the user is not at home. One of the parameters retrieved by this specific script is "remote_host". This parameter is not sanitized by the script correctly and is passed in a call to "eval" to execute another script where remote_host is concatenated to be passed a parameter to the second script. This allows an attacker to escape from the executed command and then execute any commands of his/her choice.

An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of adding new port forwarding rules to the device. It seems that the POST parameters passed in this request to set up routes on the device can be set in such a way that would result in passing commands to a "system" API in the function and thus result in command injection on the device. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "goahead" is the one that has the vulnerable function that recieves the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function sub_43C280in IDA pro is identified to be receiving the values sent in the POST request and the value set in POST parameter "ip_address" is extracted at address 0x0043C2F0. The POST parameter "ipaddress" is concatenated at address 0x0043C958 and this is passed to a "system" function at address 0x00437284. This allows an attacker to provide the payload of his/her choice and finally take control of the device.

An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of adding new routes to the device. It seems that the POST parameters passed in this request to set up routes on the device can be set in such a way that would result in passing commands to a "popen" API in the function and thus result in command injection on the device. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "goahead" is the one that has the vulnerable function that receives the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function sub_00420F38 in IDA pro is identified to be receiving the values sent in the POST request and the value set in POST parameter "dest" is extracted at address 0x00420FC4. The POST parameter "dest is concatenated in a route add command and this is passed to a "popen" function at address 0x00421220. This allows an attacker to provide the payload of his/her choice and finally take control of the device.

FusionSphere V100R006C00SPC102(NFV) has a command injection vulnerability. An authenticated, remote attacker could craft packets with malicious strings and send them to a target device. Successful exploit could allow the attacker to launch a command injection attack and execute system commands.

A command-injection vulnerability exists in a web application on a custom-built GoAhead web server used on Foscam, Vstarcam, and multiple white-label IP camera models. The mail-sending form in the mail.htm page allows an attacker to inject a command into the receiver1 field in the form; it will be executed with root privileges.

An exploitable command injection vulnerability exists in the web management interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.37. A specially crafted HTTP request can allow for a user to inject arbitrary shell characters resulting in command injection during the boot process. To trigger this vulnerability, an attacker needs to send an HTTP request and reboot the device.

In Citrix XenMobile Server through 10.12 RP9, there is an Authenticated Command Injection vulnerability, leading to remote code execution with root privileges.

An exploitable command injection vulnerability exists in the web management interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.37. A specially crafted HTTP request can allow for a user to inject arbitrary shell characters during a password change resulting in command injection. An attacker can simply send an HTTP request to the device to trigger this vulnerability.

Command Injection in EdgeMAX EdgeSwitch prior to 1.8.2 allow an Admin user to execute commands as root.

A command injection vulnerability in the IDP feature of Juniper Networks Junos OS on SRX series devices potentially allows a user with login access to the device to execute shell commands and elevate privileges. Affected releases are Juniper Networks Junos OS 12.1X44 prior to 12.1X44-D60; 12.1X46 prior to 12.1X46-D50; 12.1X47 prior to 12.1X47-D30, 12.1X47-D35; 12.3X48 prior to 12.3X48-D20, 12.3X48-D30; 15.1X49 prior to 15.1X49-D20, 15.1X49-D30.

An authenticated remote code execution vulnerability was discovered in the AOS-CX Network Analytics Engine (NAE) in Aruba CX 6200F Switch Series, Aruba 6300 Switch Series, Aruba 6400 Switch Series, Aruba 8320 Switch Series, Aruba 8325 Switch Series, Aruba 8400 Switch Series, Aruba CX 8360 Switch Series version(s): AOS-CX 10.07.xxxx: 10.07.0050 and below, AOS-CX 10.08.xxxx: 10.08.1030 and below, AOS-CX 10.09.xxxx: 10.09.0002 and below. Aruba has released upgrades for Aruba AOS-CX devices that address this security vulnerability.

Command injection vulnerability in firmware_cgi in GL.iNet GL-AR300M-Lite devices with firmware 2.27 allows remote attackers to execute arbitrary code.

setup.cgi on NETGEAR R6020 1.0.0.48 devices allows an admin to execute arbitrary shell commands via shell metacharacters in the ntp_server field.

Multiple authenticated remote code execution vulnerabilities were discovered in the AOS-CX command line interface in Aruba CX 6200F Switch Series, Aruba 6300 Switch Series, Aruba 6400 Switch Series, Aruba 8320 Switch Series, Aruba 8325 Switch Series, Aruba 8400 Switch Series, Aruba CX 8360 Switch Series version(s): AOS-CX 10.06.xxxx: 10.06.0170 and below, AOS-CX 10.07.xxxx: 10.07.0050 and below, AOS-CX 10.08.xxxx: 10.08.1030 and below. Aruba has released upgrades for Aruba AOS-CX devices that address these security vulnerabilities.

In Ubiquiti Networks EdgeSwitch X v1.1.0 and prior, a privileged user can execute arbitrary shell commands over the SSH CLI interface. This allows to execute shell commands under the root user.

A remote arbitrary command execution vulnerability was discovered in Aruba ClearPass Policy Manager version(s): ClearPass Policy Manager 6.10.x prior to 6.10.2 - - ClearPass Policy Manager 6.9.x prior to 6.9.7-HF1 - - ClearPass Policy Manager 6.8.x prior to 6.8.9-HF1. Aruba has released patches for ClearPass Policy Manager that address this security vulnerability.

Command injection vulnerability in login_cgi in GL.iNet GL-AR300M-Lite devices with firmware 2.27 allows remote attackers to execute arbitrary code.

The web interface packet capture management component in Palo Alto Networks PAN-OS before 6.1.19, 7.0.x before 7.0.19, 7.1.x before 7.1.14, and 8.0.x before 8.0.6 allows remote authenticated users to execute arbitrary code via unspecified vectors.

A remote arbitrary command execution vulnerability was discovered in Aruba SD-WAN Software and Gateways; Aruba Operating System Software version(s): Prior to 8.6.0.4-2.2.0.4; Prior to 8.7.1.4, 8.6.0.9, 8.5.0.13, 8.3.0.16, 6.5.4.20, 6.4.4.25. Aruba has released patches for Aruba SD-WAN Software and Gateways and ArubaOS that address this security vulnerability.

Sierra Wireless GX 440 devices with ALEOS firmware 4.3.2 allow Hayes AT command injection.

A remote arbitrary command execution vulnerability was discovered in Aruba SD-WAN Software and Gateways; Aruba Operating System Software version(s): Prior to 8.6.0.4-2.2.0.4; Prior to 8.7.1.4, 8.6.0.9, 8.5.0.13, 8.3.0.16, 6.5.4.20, 6.4.4.25. Aruba has released patches for Aruba SD-WAN Software and Gateways and ArubaOS that address this security vulnerability.

A remote arbitrary command execution vulnerability was discovered in Aruba Operating System Software version(s): Prior to 8.7.1.2, 8.6.0.8, 8.5.0.12, 8.3.0.16. Aruba has released patches for ArubaOS that address this security vulnerability.

A remote arbitrary command execution vulnerability was discovered in Aruba ClearPass Policy Manager version(s): ClearPass Policy Manager 6.10.x prior to 6.10.2 - - ClearPass Policy Manager 6.9.x prior to 6.9.7-HF1 - - ClearPass Policy Manager 6.8.x prior to 6.8.9-HF1. Aruba has released patches for ClearPass Policy Manager that address this security vulnerability.

A remote arbitrary command execution vulnerability was discovered in Aruba Operating System Software version(s): Prior to 8.7.1.2, 8.6.0.8, 8.5.0.12, 8.3.0.16. Aruba has released patches for ArubaOS that address this security vulnerability.

A remote arbitrary command execution vulnerability was discovered in Aruba SD-WAN Software and Gateways; Aruba Operating System Software version(s): Prior to 8.6.0.4-2.2.0.4; Prior to 8.7.1.4, 8.6.0.9, 8.5.0.13, 8.3.0.16, 6.5.4.20, 6.4.4.25. Aruba has released patches for Aruba SD-WAN Software and Gateways and ArubaOS that address this security vulnerability.

Sourcetree for macOS had several argument and command injection bugs in Mercurial and Git repository handling. An attacker with permission to commit to a repository linked in Sourcetree for macOS is able to exploit this issue to gain code execution on the system. From version 1.4.0 of Sourcetree for macOS, this vulnerability can be triggered from a webpage through the use of the Sourcetree URI handler. Versions of Sourcetree for macOS starting with 1.0b2 before version 2.7.0 are affected by this vulnerability.

A vulnerability in the web-based management interface of Cisco Intersight Virtual Appliance could allow an authenticated, remote attacker to perform a command injection attack on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by using the web-based management interface to execute a command using crafted input. A successful exploit could allow the attacker to execute arbitrary commands using root-level privileges on an affected device.

Gerapy is a distributed crawler management framework. Prior to version 0.9.9, an authenticated user could execute arbitrary commands. This issue is fixed in version 0.9.9. There are no known workarounds.

On Linksys WAG54G2 1.00.10 devices, there is authenticated command injection via shell metacharacters in the setup.cgi c4_ping_ipaddr variable.

Proxy command injection vulnerabilities in Trend Micro Mobile Security (Enterprise) versions before 9.7 Patch 3 allow remote attackers to execute arbitrary code on vulnerable installations.

IBM Security Identity Manager Virtual Appliance 6.0 and 7.0 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 127394.

In the AMD SEV/SEV-ES feature, memory can be rearranged in the guest address space that is not detected by the attestation mechanism which could be used by a malicious hypervisor to potentially lead to arbitrary code execution within the guest VM if a malicious administrator has access to compromise the server hypervisor.

A vulnerability was found in Roxy-WI up to 8.1.3. It has been declared as critical. Affected by this vulnerability is the function action_service of the file app/modules/roxywi/roxy.py. The manipulation of the argument action/service leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 8.1.4 is able to address this issue. The identifier of the patch is 32313928eb9ce906887b8a30bf7b9a3d5c0de1be. It is recommended to upgrade the affected component.

Proxy command injection vulnerability in Trend Micro InterScan Messaging Virtual Appliance 9.0 and 9.1 allows remote attackers to execute arbitrary code on vulnerable installations. The specific flaw can be exploited by parsing the "t" parameter within modTMCSS Proxy. Formerly ZDI-CAN-4744.

A vulnerability in the Smart Licensing Manager service of the Cisco Firepower 4100 Series Next-Generation Firewall (NGFW) and Firepower 9300 Security Appliance could allow an authenticated, remote attacker to inject arbitrary commands that could be executed with root privileges. The vulnerability is due to insufficient input validation of certain Smart Licensing configuration parameters. An authenticated attacker could exploit the vulnerability by configuring a malicious URL within the affected feature. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. This vulnerability affects the following Cisco Firepower Security products running FX-OS code trains 1.1.3, 1.1.4, and 2.0.1 (versions 2.1.1, 2.2.1, and 2.2.2 are not affected): Firepower 4100 Series Next-Generation Firewall and Firepower 9300 Security Appliance. Cisco Bug IDs: CSCvb86863.

Proxy command injection vulnerability in Trend Micro InterScan Messaging Virtual Appliance 9.0 and 9.1 allows remote attackers to execute arbitrary code on vulnerable installations. The specific flaw can be exploited by parsing the "T" parameter within modTMCSS Proxy. Formerly ZDI-CAN-4745.

Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to perform command injection attacks against an affected device. These vulnerabilities are due to improper validation of user-supplied input. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the device. To exploit these vulnerabilities, the attacker must have valid administrative credentials for the device.

Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.

In the `manim` plugin of binary-husky/gpt_academic, versions prior to the fix, a vulnerability exists due to improper handling of user-provided prompts. The root cause is the execution of untrusted code generated by the LLM without a proper sandbox. This allows an attacker to perform remote code execution (RCE) on the app backend server by injecting malicious code through the prompt.

The `add_llm` function in `llm_app.py` in infiniflow/ragflow version 0.11.0 contains a remote code execution (RCE) vulnerability. The function uses user-supplied input `req['llm_factory']` and `req['llm_name']` to dynamically instantiate classes from various model dictionaries. This approach allows an attacker to potentially execute arbitrary code due to the lack of comprehensive input validation or sanitization. An attacker could provide a malicious value for 'llm_factory' that, when used as an index to these model dictionaries, results in the execution of arbitrary code.

A vulnerability was found in TRENDnet TEW-815DAP 1.0.2.0. It has been classified as critical. This affects the function do_setNTP of the component POST Request Handler. The manipulation of the argument NtpDstStart/NtpDstEnd leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-252123. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The Untangle NG firewall 14.2.0 is vulnerable to an authenticated command injection when logged in as an admin user.

A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an authenticated, remote attacker to execute arbitrary commands with root privileges. The vulnerability is due to incorrect input validation of user-supplied data by the NX-API subsystem. An attacker could exploit this vulnerability by sending malicious HTTP or HTTPS packets to the management interface of an affected system that has the NX-API feature enabled. A successful exploit could allow the attacker to perform a command-injection attack and execute arbitrary commands with root privileges. Note: NX-API is disabled by default. MDS 9000 Series Multilayer Switches are affected running software versions prior to 8.1(1b) and 8.2(3). Nexus 3000 Series Switches are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 3500 Platform Switches are affected running software versions prior to 7.0(3)I7(4). Nexus 2000, 5500, 5600, and 6000 Series Switches are affected running software versions prior to 7.3(4)N1(1). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 7000 and 7700 Series Switches are affected running software versions prior to 7.3(3)D1(1) and 8.2(3).

A vulnerability in the vManage web-based UI (Web UI) in the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the vManage Web UI. A successful exploit could allow the attacker to execute commands with root privileges.

A vulnerability in the web-based management interface of Cisco Webex Video Mesh could allow an authenticated, remote attacker to execute arbitrary commands on the affected system. The vulnerability is due to improper validation of user-supplied input by the web-based management interface of the affected software. An attacker could exploit this vulnerability by logging in to the web-based management interface with administrative privileges and supplying crafted requests to the application. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with root privileges on a targeted node.

An issue was discovered in Softing uaGate (SI, MB, 840D) firmware through 1.71.00.1225. A CGI script is vulnerable to command injection via a maliciously crafted form parameter.

An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication) via the UDP Ports To Open in Add Gaming Rule.

Multiple vulnerabilities in the web-based user interface (Web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands with elevated privileges on the affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the WebUI of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system. The vulnerability is due to insufficient input validation of data parameters for certain fields in the affected solution. An attacker could exploit this vulnerability by configuring a malicious username on the login page of the affected solution. A successful exploit could allow the attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system.

Multiple vulnerabilities in the web-based user interface (Web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands with elevated privileges on the affected device. For more information about these vulnerabilities, see the Details section of this advisory.