The tibbr user profiles components of tibbr Community, and tibbr Enterprise expose a weakness in an improperly sandboxed third-party component. Affected releases are TIBCO Software Inc. tibbr Community 5.2.1 and below; 6.0.0; 6.0.1; 7.0.0, tibbr Enterprise 5.2.1 and below; 6.0.0; 6.0.1; 7.0.0.

Deployments of TIBCO Managed File Transfer Command Center versions 8.0.0 and 8.0.1 and TIBCO Managed File Transfer Internet Server versions 8.0.0 and 8.0.1 that enable the Administrator Service may be affected by a vulnerability which may allow any authenticated user to gain administrative control of Managed File Transfer web applications.

Unspecified vulnerability in the ActiveMatrix Runtime component in TIBCO ActiveMatrix Service Grid 3.0.0, 3.0.1, and 3.1.0; ActiveMatrix Service Bus 3.0.0 and 3.0.1; ActiveMatrix BusinessWorks Service Engine 5.9.0; ActiveMatrix BPM 1.0.1 and 1.0.2; Silver BPM Service 1.0.1; and Silver CAP Service 1.0.0 allows remote authenticated users to execute arbitrary code via vectors related to JMX connections.

The MFT admin service component of TIBCO Software Inc.'s TIBCO Managed File Transfer Command Center and TIBCO Managed File Transfer Internet Server contains a vulnerability that theoretically allows an authenticated user with specific permissions to obtain the session identifier of another user. The session identifier when replayed could provide administrative rights or file transfer permissions to the affected system. Affected releases are TIBCO Software Inc.'s TIBCO Managed File Transfer Command Center: versions 8.2.1 and below and TIBCO Managed File Transfer Internet Server: versions 8.2.1 and below.

The realm configuration component of TIBCO Software Inc.'s TIBCO FTL Community Edition, TIBCO FTL Developer Edition, TIBCO FTL Enterprise Edition contains a vulnerability that theoretically fails to properly enforce access controls. This issue affects TIBCO FTL Community Edition 6.0.0; 6.0.1; 6.1.0, TIBCO FTL Developer Edition 6.0.1; 6.1.0, and TIBCO FTL Enterprise Edition 6.0.0; 6.0.1; 6.1.0.

A vulnerability in the report scripting component of TIBCO Software Inc.'s TIBCO JasperReports Server, TIBCO JasperReports Server Community Edition, TIBCO JasperReports Server for ActiveMatrix BPM, TIBCO JasperReports Library, TIBCO JasperReports Library Community Edition, TIBCO JasperReports Library for ActiveMatrix BPM, TIBCO Jaspersoft for AWS with Multi-Tenancy, TIBCO Jaspersoft Reporting and Analytics for AWS, TIBCO Jaspersoft Studio, TIBCO Jaspersoft Studio Community Edition, and TIBCO Jaspersoft Studio for ActiveMatrix BPM may allow analytic reports that contain scripting to perform arbitrary code execution. Affected releases include TIBCO Software Inc.'s TIBCO JasperReports Server: versions up to and including 6.2.4; 6.3.0; 6.3.2;6.3.3; 6.4.0; 6.4.2, TIBCO JasperReports Server Community Edition: versions up to and including 6.4.2, TIBCO JasperReports Server for ActiveMatrix BPM: versions up to and including 6.4.2, TIBCO JasperReports Library: versions up to and including 6.2.4; 6.3.0; 6.3.2; 6.3.3; 6.4.0; 6.4.1; 6.4.2, TIBCO JasperReports Library Community Edition: versions up to and including 6.4.3, TIBCO JasperReports Library for ActiveMatrix BPM: versions up to and including 6.4.2, TIBCO Jaspersoft for AWS with Multi-Tenancy: versions up to and including 6.4.2, TIBCO Jaspersoft Reporting and Analytics for AWS: versions up to and including 6.4.2, TIBCO Jaspersoft Studio: versions up to and including 6.2.4; 6.3.0; 6.3.2; 6.3.3; 6.4.0; 6.4.2, TIBCO Jaspersoft Studio Community Edition: versions up to and including 6.4.3, TIBCO Jaspersoft Studio for ActiveMatrix BPM: versions up to and including 6.4.2.

The Spotfire server component of TIBCO Software Inc.'s TIBCO Spotfire Analytics Platform for AWS Marketplace, and TIBCO Spotfire Server contain multiple vulnerabilities that may allow for the disclosure of information, including user and data source credentials. Affected releases are TIBCO Software Inc.'s TIBCO Spotfire Analytics Platform for AWS Marketplace: versions up to and including 7.12.0, TIBCO Spotfire Server: versions up to and including 7.8.1; 7.9.0; 7.10.0; 7.11.0; 7.12.0.

The TIBCO Spotfire Client and TIBCO Spotfire Web Player Client components of TIBCO Software Inc.'s TIBCO Spotfire Analyst, TIBCO Spotfire Analytics Platform for AWS Marketplace, TIBCO Spotfire Deployment Kit, TIBCO Spotfire Desktop, and TIBCO Spotfire Desktop Language Packs contain multiple vulnerabilities that may allow for unauthorized information disclosure. Affected releases are TIBCO Software Inc.'s TIBCO Spotfire Analyst: versions up to and including 7.8.0; 7.9.0; 7.9.1; 7.10.0; 7.10.1; 7.11.0; 7.12.0, TIBCO Spotfire Analytics Platform for AWS Marketplace: versions up to and including 7.12.0, TIBCO Spotfire Deployment Kit: versions up to and including 7.8.0; 7.9.0;7.9.1;7.10.0;7.10.1;7.11.0; 7.12.0, TIBCO Spotfire Desktop: versions up to and including 7.8.0; 7.9.0; 7.9.1; 7.10.0; 7.10.1; 7.11.0;7.12.0, TIBCO Spotfire Desktop Language Packs: versions up to and including 7.8.0; 7.9.0; 7.9.1; 7.10.0; 7.10.1; 7.11.0.

Buffer overflow in tibemsd in the server in TIBCO Enterprise Message Service (EMS) before 8.3.0 and EMS Appliance before 2.4.0 allows remote authenticated users to cause a denial of service or possibly execute arbitrary code via crafted inbound data.

The server component of TIBCO Software Inc.'s TIBCO Enterprise Runtime for R - Server Edition, and TIBCO Spotfire Analytics Platform for AWS Marketplace contains a vulnerability that theoretically allows an authenticated user to trigger remote code execution in certain circumstances. When the affected component runs with the containerized TERR service on Linux the host can theoretically be tricked into running malicious code. This issue affects: TIBCO Enterprise Runtime for R - Server Edition version 1.2.0 and below, and TIBCO Spotfire Analytics Platform for AWS Marketplace 10.4.0; 10.5.0.

The domain management component of TIBCO Software Inc.'s TIBCO JasperReports Server, TIBCO JasperReports Server Community Edition, TIBCO JasperReports Server for ActiveMatrix BPM, TIBCO Jaspersoft for AWS with Multi-Tenancy, and TIBCO Jaspersoft Reporting and Analytics for AWS contains a race-condition vulnerability that may allow any users with domain save privileges to gain superuser privileges. Affected releases are TIBCO Software Inc.'s TIBCO JasperReports Server: versions up to and including 6.3.4; 6.4.0; 6.4.1; 6.4.2; 6.4.3; 7.1.0, TIBCO JasperReports Server Community Edition: versions up to and including 7.1.0, TIBCO JasperReports Server for ActiveMatrix BPM: versions up to and including 6.4.3, TIBCO Jaspersoft for AWS with Multi-Tenancy: versions up to and including 7.1.0, and TIBCO Jaspersoft Reporting and Analytics for AWS: versions up to and including 7.1.0.

The Spotfire library component of TIBCO Software Inc.'s TIBCO Spotfire Analytics Platform for AWS Marketplace and TIBCO Spotfire Server contains a vulnerability that theoretically allows an attacker with write permissions to the Spotfire Library, but not "Script Author" group permission, to modify attributes of files and objects saved to the library such that the system treats them as trusted. This could allow an attacker to cause the Spotfire Web Player, Analyst clients, and TERR Service into executing arbitrary code with the privileges of the system account that started those processes. Affected releases are TIBCO Software Inc.'s TIBCO Spotfire Analytics Platform for AWS Marketplace: versions 10.8.0 and below and TIBCO Spotfire Server: versions 7.11.9 and below, versions 7.12.0, 7.13.0, 7.14.0, 10.0.0, 10.0.1, 10.1.0, 10.2.0, 10.3.0, 10.3.1, 10.3.2, 10.3.3, 10.3.4, 10.3.5, and 10.3.6, versions 10.4.0, 10.5.0, 10.6.0, 10.6.1, 10.7.0, and 10.8.0.

The Web Server component of TIBCO Software Inc.'s TIBCO AuditSafe contains an easily exploitable vulnerability that allows an unauthenticated attacker with network access to execute API methods on the affected system. Affected releases are TIBCO Software Inc.'s TIBCO AuditSafe: versions 1.1.0 and below.

An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides a web user interface that allows a user to manage the device. As a part of the functionality the device firmware file contains a file known as relay.sh which allows the device to create relay ports and connect the device to Vera servers. This is primarily used as a method of communication between the device and Vera servers so the devices can be communicated with even when the user is not at home. One of the parameters retrieved by this specific script is "remote_host". This parameter is not sanitized by the script correctly and is passed in a call to "eval" to execute another script where remote_host is concatenated to be passed a parameter to the second script. This allows an attacker to escape from the executed command and then execute any commands of his/her choice.

An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of adding new port forwarding rules to the device. It seems that the POST parameters passed in this request to set up routes on the device can be set in such a way that would result in passing commands to a "system" API in the function and thus result in command injection on the device. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "goahead" is the one that has the vulnerable function that recieves the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function sub_43C280in IDA pro is identified to be receiving the values sent in the POST request and the value set in POST parameter "ip_address" is extracted at address 0x0043C2F0. The POST parameter "ipaddress" is concatenated at address 0x0043C958 and this is passed to a "system" function at address 0x00437284. This allows an attacker to provide the payload of his/her choice and finally take control of the device.

An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of adding new routes to the device. It seems that the POST parameters passed in this request to set up routes on the device can be set in such a way that would result in passing commands to a "popen" API in the function and thus result in command injection on the device. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "goahead" is the one that has the vulnerable function that receives the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function sub_00420F38 in IDA pro is identified to be receiving the values sent in the POST request and the value set in POST parameter "dest" is extracted at address 0x00420FC4. The POST parameter "dest is concatenated in a route add command and this is passed to a "popen" function at address 0x00421220. This allows an attacker to provide the payload of his/her choice and finally take control of the device.

FusionSphere V100R006C00SPC102(NFV) has a command injection vulnerability. An authenticated, remote attacker could craft packets with malicious strings and send them to a target device. Successful exploit could allow the attacker to launch a command injection attack and execute system commands.

A command-injection vulnerability exists in a web application on a custom-built GoAhead web server used on Foscam, Vstarcam, and multiple white-label IP camera models. The mail-sending form in the mail.htm page allows an attacker to inject a command into the receiver1 field in the form; it will be executed with root privileges.

An exploitable command injection vulnerability exists in the web management interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.37. A specially crafted HTTP request can allow for a user to inject arbitrary shell characters resulting in command injection during the boot process. To trigger this vulnerability, an attacker needs to send an HTTP request and reboot the device.

In Citrix XenMobile Server through 10.12 RP9, there is an Authenticated Command Injection vulnerability, leading to remote code execution with root privileges.

An exploitable command injection vulnerability exists in the web management interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.37. A specially crafted HTTP request can allow for a user to inject arbitrary shell characters during a password change resulting in command injection. An attacker can simply send an HTTP request to the device to trigger this vulnerability.

Command Injection in EdgeMAX EdgeSwitch prior to 1.8.2 allow an Admin user to execute commands as root.

A command injection vulnerability in the IDP feature of Juniper Networks Junos OS on SRX series devices potentially allows a user with login access to the device to execute shell commands and elevate privileges. Affected releases are Juniper Networks Junos OS 12.1X44 prior to 12.1X44-D60; 12.1X46 prior to 12.1X46-D50; 12.1X47 prior to 12.1X47-D30, 12.1X47-D35; 12.3X48 prior to 12.3X48-D20, 12.3X48-D30; 15.1X49 prior to 15.1X49-D20, 15.1X49-D30.

An authenticated remote code execution vulnerability was discovered in the AOS-CX Network Analytics Engine (NAE) in Aruba CX 6200F Switch Series, Aruba 6300 Switch Series, Aruba 6400 Switch Series, Aruba 8320 Switch Series, Aruba 8325 Switch Series, Aruba 8400 Switch Series, Aruba CX 8360 Switch Series version(s): AOS-CX 10.07.xxxx: 10.07.0050 and below, AOS-CX 10.08.xxxx: 10.08.1030 and below, AOS-CX 10.09.xxxx: 10.09.0002 and below. Aruba has released upgrades for Aruba AOS-CX devices that address this security vulnerability.

Command injection vulnerability in firmware_cgi in GL.iNet GL-AR300M-Lite devices with firmware 2.27 allows remote attackers to execute arbitrary code.

setup.cgi on NETGEAR R6020 1.0.0.48 devices allows an admin to execute arbitrary shell commands via shell metacharacters in the ntp_server field.

Multiple authenticated remote code execution vulnerabilities were discovered in the AOS-CX command line interface in Aruba CX 6200F Switch Series, Aruba 6300 Switch Series, Aruba 6400 Switch Series, Aruba 8320 Switch Series, Aruba 8325 Switch Series, Aruba 8400 Switch Series, Aruba CX 8360 Switch Series version(s): AOS-CX 10.06.xxxx: 10.06.0170 and below, AOS-CX 10.07.xxxx: 10.07.0050 and below, AOS-CX 10.08.xxxx: 10.08.1030 and below. Aruba has released upgrades for Aruba AOS-CX devices that address these security vulnerabilities.

In Ubiquiti Networks EdgeSwitch X v1.1.0 and prior, a privileged user can execute arbitrary shell commands over the SSH CLI interface. This allows to execute shell commands under the root user.

A remote arbitrary command execution vulnerability was discovered in Aruba ClearPass Policy Manager version(s): ClearPass Policy Manager 6.10.x prior to 6.10.2 - - ClearPass Policy Manager 6.9.x prior to 6.9.7-HF1 - - ClearPass Policy Manager 6.8.x prior to 6.8.9-HF1. Aruba has released patches for ClearPass Policy Manager that address this security vulnerability.

Command injection vulnerability in login_cgi in GL.iNet GL-AR300M-Lite devices with firmware 2.27 allows remote attackers to execute arbitrary code.

The web interface packet capture management component in Palo Alto Networks PAN-OS before 6.1.19, 7.0.x before 7.0.19, 7.1.x before 7.1.14, and 8.0.x before 8.0.6 allows remote authenticated users to execute arbitrary code via unspecified vectors.

A remote arbitrary command execution vulnerability was discovered in Aruba SD-WAN Software and Gateways; Aruba Operating System Software version(s): Prior to 8.6.0.4-2.2.0.4; Prior to 8.7.1.4, 8.6.0.9, 8.5.0.13, 8.3.0.16, 6.5.4.20, 6.4.4.25. Aruba has released patches for Aruba SD-WAN Software and Gateways and ArubaOS that address this security vulnerability.

Sierra Wireless GX 440 devices with ALEOS firmware 4.3.2 allow Hayes AT command injection.

A remote arbitrary command execution vulnerability was discovered in Aruba SD-WAN Software and Gateways; Aruba Operating System Software version(s): Prior to 8.6.0.4-2.2.0.4; Prior to 8.7.1.4, 8.6.0.9, 8.5.0.13, 8.3.0.16, 6.5.4.20, 6.4.4.25. Aruba has released patches for Aruba SD-WAN Software and Gateways and ArubaOS that address this security vulnerability.

A remote arbitrary command execution vulnerability was discovered in Aruba Operating System Software version(s): Prior to 8.7.1.2, 8.6.0.8, 8.5.0.12, 8.3.0.16. Aruba has released patches for ArubaOS that address this security vulnerability.

A remote arbitrary command execution vulnerability was discovered in Aruba ClearPass Policy Manager version(s): ClearPass Policy Manager 6.10.x prior to 6.10.2 - - ClearPass Policy Manager 6.9.x prior to 6.9.7-HF1 - - ClearPass Policy Manager 6.8.x prior to 6.8.9-HF1. Aruba has released patches for ClearPass Policy Manager that address this security vulnerability.

A remote arbitrary command execution vulnerability was discovered in Aruba Operating System Software version(s): Prior to 8.7.1.2, 8.6.0.8, 8.5.0.12, 8.3.0.16. Aruba has released patches for ArubaOS that address this security vulnerability.

A remote arbitrary command execution vulnerability was discovered in Aruba SD-WAN Software and Gateways; Aruba Operating System Software version(s): Prior to 8.6.0.4-2.2.0.4; Prior to 8.7.1.4, 8.6.0.9, 8.5.0.13, 8.3.0.16, 6.5.4.20, 6.4.4.25. Aruba has released patches for Aruba SD-WAN Software and Gateways and ArubaOS that address this security vulnerability.

Sourcetree for macOS had several argument and command injection bugs in Mercurial and Git repository handling. An attacker with permission to commit to a repository linked in Sourcetree for macOS is able to exploit this issue to gain code execution on the system. From version 1.4.0 of Sourcetree for macOS, this vulnerability can be triggered from a webpage through the use of the Sourcetree URI handler. Versions of Sourcetree for macOS starting with 1.0b2 before version 2.7.0 are affected by this vulnerability.

A vulnerability in the web-based management interface of Cisco Intersight Virtual Appliance could allow an authenticated, remote attacker to perform a command injection attack on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by using the web-based management interface to execute a command using crafted input. A successful exploit could allow the attacker to execute arbitrary commands using root-level privileges on an affected device.

Gerapy is a distributed crawler management framework. Prior to version 0.9.9, an authenticated user could execute arbitrary commands. This issue is fixed in version 0.9.9. There are no known workarounds.

On Linksys WAG54G2 1.00.10 devices, there is authenticated command injection via shell metacharacters in the setup.cgi c4_ping_ipaddr variable.

Proxy command injection vulnerabilities in Trend Micro Mobile Security (Enterprise) versions before 9.7 Patch 3 allow remote attackers to execute arbitrary code on vulnerable installations.

IBM Security Identity Manager Virtual Appliance 6.0 and 7.0 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 127394.

In the AMD SEV/SEV-ES feature, memory can be rearranged in the guest address space that is not detected by the attestation mechanism which could be used by a malicious hypervisor to potentially lead to arbitrary code execution within the guest VM if a malicious administrator has access to compromise the server hypervisor.

A vulnerability was found in Roxy-WI up to 8.1.3. It has been declared as critical. Affected by this vulnerability is the function action_service of the file app/modules/roxywi/roxy.py. The manipulation of the argument action/service leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 8.1.4 is able to address this issue. The identifier of the patch is 32313928eb9ce906887b8a30bf7b9a3d5c0de1be. It is recommended to upgrade the affected component.

Proxy command injection vulnerability in Trend Micro InterScan Messaging Virtual Appliance 9.0 and 9.1 allows remote attackers to execute arbitrary code on vulnerable installations. The specific flaw can be exploited by parsing the "t" parameter within modTMCSS Proxy. Formerly ZDI-CAN-4744.

A vulnerability in the Smart Licensing Manager service of the Cisco Firepower 4100 Series Next-Generation Firewall (NGFW) and Firepower 9300 Security Appliance could allow an authenticated, remote attacker to inject arbitrary commands that could be executed with root privileges. The vulnerability is due to insufficient input validation of certain Smart Licensing configuration parameters. An authenticated attacker could exploit the vulnerability by configuring a malicious URL within the affected feature. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. This vulnerability affects the following Cisco Firepower Security products running FX-OS code trains 1.1.3, 1.1.4, and 2.0.1 (versions 2.1.1, 2.2.1, and 2.2.2 are not affected): Firepower 4100 Series Next-Generation Firewall and Firepower 9300 Security Appliance. Cisco Bug IDs: CSCvb86863.

Proxy command injection vulnerability in Trend Micro InterScan Messaging Virtual Appliance 9.0 and 9.1 allows remote attackers to execute arbitrary code on vulnerable installations. The specific flaw can be exploited by parsing the "T" parameter within modTMCSS Proxy. Formerly ZDI-CAN-4745.

Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to perform command injection attacks against an affected device. These vulnerabilities are due to improper validation of user-supplied input. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the device. To exploit these vulnerabilities, the attacker must have valid administrative credentials for the device.