It's been found that multiple functions in ipmitool before 1.8.19 neglect proper checking of the data received from a remote LAN party, which may lead to buffer overflows and potentially to remote code execution on the ipmitool side. This is especially dangerous if ipmitool is run as a privileged user. This problem is fixed in version 1.8.19.

A vulnerability classified as critical was found in X.org Server. Affected by this vulnerability is the function _GetCountedString of the file xkb/xkb.c. The manipulation leads to buffer overflow. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211051.

In PHP versions 7.4.x below 7.4.30, 8.0.x below 8.0.20, and 8.1.x below 8.1.7, when pdo_mysql extension with mysqlnd driver, if the third party is allowed to supply host to connect to and the password for the connection, password of excessive length can trigger a buffer overflow in PHP, which can lead to a remote code execution vulnerability.

net-snmp provides various tools relating to the Simple Network Management Protocol. Prior to version 5.9.2, a buffer overflow in the handling of the `INDEX` of `NET-SNMP-VACM-MIB` can cause an out-of-bounds memory access. A user with read-only credentials can exploit the issue. Version 5.9.2 contains a patch. Users should use strong SNMPv3 credentials and avoid sharing the credentials. Those who must use SNMPv1 or SNMPv2c should use a complex community string and enhance the protection by restricting access to a given IP address range.

Multiple buffer overflow vulnerabilities were found in the QUIC image decoding process of the SPICE remote display system, before spice-0.14.2-1. Both the SPICE client (spice-gtk) and server are affected by these flaws. These flaws allow a malicious client or server to send specially crafted messages that, when processed by the QUIC image compression algorithm, result in a process crash or potential code execution.

The to_char function in PostgreSQL before 9.0.19, 9.1.x before 9.1.15, 9.2.x before 9.2.10, 9.3.x before 9.3.6, and 9.4.x before 9.4.1 allows remote authenticated users to cause a denial of service (crash) or possibly execute arbitrary code via a (1) large number of digits when processing a numeric formatting template, which triggers a buffer over-read, or (2) crafted timestamp formatting template, which triggers a buffer overflow.

XStream is software for serializing Java objects to XML and back again. A vulnerability in XStream versions prior to 1.4.17 may allow a remote attacker has sufficient rights to execute commands of the host only by manipulating the processed input stream. No user who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types is affected. The vulnerability is patched in version 1.4.17.

PostgreSQL 8.2 before 8.2.6, 8.1 before 8.1.11, 8.0 before 8.0.15, 7.4 before 7.4.19, and 7.3 before 7.3.21 uses superuser privileges instead of table owner privileges for (1) VACUUM and (2) ANALYZE operations within index functions, and supports (3) SET ROLE and (4) SET SESSION AUTHORIZATION within index functions, which allows remote authenticated users to gain privileges.

A flaw was found in PostgreSQL that allows authenticated database users to execute arbitrary code through missing overflow checks during SQL array value modification. This issue exists due to an integer overflow during array modification where a remote user can trigger the overflow by providing specially crafted data. This enables the execution of arbitrary code on the target system, allowing users to write arbitrary bytes to memory and extensively read the server's memory.

Composer is a dependency manager for PHP. URLs for Mercurial repositories in the root composer.json and package source download URLs are not sanitized correctly. Specifically crafted URL values allow code to be executed in the HgDriver if hg/Mercurial is installed on the system. The impact to Composer users directly is limited as the composer.json file is typically under their own control and source download URLs can only be supplied by third party Composer repositories they explicitly trust to download and execute source code from, e.g. Composer plugins. The main impact is to services passing user input to Composer, including Packagist.org and Private Packagist. This allowed users to trigger remote code execution. The vulnerability has been patched on Packagist.org and Private Packagist within 12h of receiving the initial vulnerability report and based on a review of logs, to the best of our knowledge, was not abused by anyone. Other services/tools using VcsRepository/VcsDriver or derivatives may also be vulnerable and should upgrade their composer/composer dependency immediately. Versions 1.10.22 and 2.0.13 include patches for this issue.

The package underscore from 1.13.0-0 and before 1.13.0-2, from 1.3.2 and before 1.12.1 are vulnerable to Arbitrary Code Injection via the template function, particularly when a variable property is passed as an argument as it is not sanitized.

Passing an absolute path to a file_exists check in phpBB before 3.2.4 allows Remote Code Execution through Object Injection by employing Phar deserialization when an attacker has access to the Admin Control Panel with founder permissions.

SQL injection vulnerability in the Call Detail Record Postgres logging engine (cdr_pgsql) in Asterisk 1.4.x before 1.4.15, 1.2.x before 1.2.25, B.x before B.2.3.4, and C.x before C.1.0-beta6 allows remote authenticated users to execute arbitrary SQL commands via (1) ANI and (2) DNIS arguments.

Smarty is a template engine for PHP, facilitating the separation of presentation (HTML/CSS) from application logic. Prior to versions 3.1.43 and 4.0.3, template authors could run restricted static php methods. Users should upgrade to version 3.1.43 or 4.0.3 to receive a patch.

XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is a vulnerability which may allow a remote attacker who has sufficient rights to execute commands of the host only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16.

Matrix Synapse before 0.33.3.1 allows remote attackers to spoof events and possibly have unspecified other impacts by leveraging improper transaction and event signature validation.

XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is a vulnerability may allow a remote attacker to load and execute arbitrary code from a remote host only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16.

On a Samba 4 AD DC the LDAP server in all versions of Samba from 4.0.0 onwards incorrectly validates permissions to modify passwords over LDAP allowing authenticated users to change any other users' passwords, including administrative users and privileged service accounts (eg Domain Controllers).

An authentication flaw was found in ceph in versions before 14.2.20. When the monitor handles CEPHX_GET_AUTH_SESSION_KEY requests, it doesn't sanitize other_keys, allowing key reuse. An attacker who can request a global_id can exploit the ability of any user to request a global_id previously associated with another user, as ceph does not force the reuse of old keys to generate new ones. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.

ftpd.c in the GSS-API FTP daemon in MIT Kerberos Version 5 Applications (aka krb5-appl) 1.0.1 and earlier does not check the krb5_setegid return value, which allows remote authenticated users to bypass intended group access restrictions, and create, overwrite, delete, or read files, via standard FTP commands, related to missing autoconf tests in a configure script.

It was found that the fix for CVE-2018-10927, CVE-2018-10928, CVE-2018-10929, CVE-2018-10930, and CVE-2018-10926 was incomplete. A remote, authenticated attacker could use one of these flaws to execute arbitrary code, create arbitrary files, or cause denial of service on glusterfs server nodes via symlinks to relative paths.

An issue was discovered in Open Ticket Request System (OTRS) 6.0.x through 6.0.9, 5.0.x through 5.0.28, and 4.0.x through 4.0.30. An attacker who is logged into OTRS as an agent may escalate their privileges by accessing a specially crafted URL.

Attacker controlled files can be uploaded to arbitrary locations on the web server's filesystem by abusing a path traversal vulnerability.

WordPress through 4.9.6 allows Author users to execute arbitrary code by leveraging directory traversal in the wp-admin/post.php thumb parameter, which is passed to the PHP unlink function and can delete the wp-config.php file. This is related to missing filename validation in the wp-includes/post.php wp_delete_attachment function. The attacker must have capabilities for files and posts that are normally available only to the Author, Editor, and Administrator roles. The attack methodology is to delete wp-config.php and then launch a new installation process to increase the attacker's privileges.

An issue was discovered in Xen 4.7 through 4.10.x. libxl fails to pass the readonly flag to qemu when setting up a SCSI disk, due to what was probably an erroneous merge conflict resolution. Malicious guest administrators or (in some situations) users may be able to write to supposedly read-only disk images. Only emulated SCSI disks (specified as "sd" in the libxl disk configuration, or an equivalent) are affected. IDE disks ("hd") are not affected (because attempts to make them readonly are rejected). Additionally, CDROM devices (that is, devices specified to be presented to the guest as CDROMs, regardless of the nature of the backing storage on the host) are not affected; they are always read only. Only systems using qemu-xen (rather than qemu-xen-traditional) as the device model version are vulnerable. Only systems using libxl or libxl-based toolstacks are vulnerable. (This includes xl, and libvirt with the libxl driver.) The vulnerability is present in Xen versions 4.7 and later. (In earlier versions, provided that the patch for XSA-142 has been applied, attempts to create read only disks are rejected.) If the host and guest together usually support PVHVM, the issue is exploitable only if the malicious guest administrator has control of the guest kernel or guest kernel command line.

An issue was discovered in Linaro LAVA before 2018.5.post1. Because of use of yaml.load() instead of yaml.safe_load() when parsing user data, remote code execution can occur.

Time-of-check Time-of-use (TOCTOU) race condition in pg_dump in PostgreSQL allows an object creator to execute arbitrary SQL functions as the user running pg_dump, which is often a superuser. The attack involves replacing another relation type with a view or foreign table. The attack requires waiting for pg_dump to start, but winning the race condition is trivial if the attacker retains an open transaction. Versions before PostgreSQL 16.4, 15.8, 14.13, 13.16, and 12.20 are affected.

A heap-buffer overflow was found in the way samba clients processed extra long filename in a directory listing. A malicious samba server could use this flaw to cause arbitrary code execution on a samba client. Samba versions before 4.6.16, 4.7.9 and 4.8.4 are vulnerable.

It was found that glusterfs server is vulnerable to multiple stack based buffer overflows due to functions in server-rpc-fopc.c allocating fixed size buffers using 'alloca(3)'. An authenticated attacker could exploit this by mounting a gluster volume and sending a string longer that the fixed buffer size to cause crash or potential code execution.

A flaw was found in RPC request using gfs3_symlink_req in glusterfs server which allows symlink destinations to point to file paths outside of the gluster volume. An authenticated attacker could use this flaw to create arbitrary symlinks pointing anywhere on the server and execute arbitrary code on glusterfs server nodes.

Paramiko version 2.4.1, 2.3.2, 2.2.3, 2.1.5, 2.0.8, 1.18.5, 1.17.6 contains a Incorrect Access Control vulnerability in SSH server that can result in RCE. This attack appear to be exploitable via network connectivity.

graph_realtime.php in Cacti 1.2.8 allows remote attackers to execute arbitrary OS commands via shell metacharacters in a cookie, if a guest user has the graph real-time privilege.

The is a code injection vulnerability in versions of Rails prior to 5.0.1 that wouldallow an attacker who controlled the `locals` argument of a `render` call to perform a RCE.

chrony before 1.31.1 does not initialize the last "next" pointer when saving unacknowledged replies to command requests, which allows remote authenticated users to cause a denial of service (uninitialized pointer dereference and daemon crash) or possibly execute arbitrary code via a large number of command requests.

It was found that glusterfs server does not properly sanitize file paths in the "trusted.io-stats-dump" extended attribute which is used by the "debug/io-stats" translator. Attacker can use this flaw to create files and execute arbitrary code. To exploit this attacker would require sufficient access to modify the extended attributes of files on a gluster volume.

Stack-based buffer overflow in the *printf function implementations in PostgreSQL before 9.0.19, 9.1.x before 9.1.15, 9.2.x before 9.2.10, 9.3.x before 9.3.6, and 9.4.x before 9.4.1, when running on a Windows system, allows remote authenticated users to cause a denial of service (crash) and possibly execute arbitrary code via a floating point number with a large precision, as demonstrated by using the to_char function.

Integer overflow in the ProcDRI2GetBuffers function in the DRI2 extension in X.Org Server (aka xserver and xorg-server) 1.7.0 through 1.16.x before 1.16.3 allows remote authenticated users to cause a denial of service (crash) or possibly execute arbitrary code via a crafted request, which triggers an out-of-bounds read or write.

The GLX extension in XFree86 4.0, X.Org X Window System (aka X11 or X) X11R6.7, and X.Org Server (aka xserver and xorg-server) before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length or index value to the (1) __glXDisp_Render, (2) __glXDisp_RenderLarge, (3) __glXDispSwap_VendorPrivate, (4) __glXDispSwap_VendorPrivateWithReply, (5) set_client_info, (6) __glXDispSwap_SetClientInfoARB, (7) DoSwapInterval, (8) DoGetProgramString, (9) DoGetString, (10) __glXDispSwap_RenderMode, (11) __glXDisp_GetCompressedTexImage, (12) __glXDispSwap_GetCompressedTexImage, (13) __glXDisp_FeedbackBuffer, (14) __glXDispSwap_FeedbackBuffer, (15) __glXDisp_SelectBuffer, (16) __glXDispSwap_SelectBuffer, (17) __glXDisp_Flush, (18) __glXDispSwap_Flush, (19) __glXDisp_Finish, (20) __glXDispSwap_Finish, (21) __glXDisp_ReadPixels, (22) __glXDispSwap_ReadPixels, (23) __glXDisp_GetTexImage, (24) __glXDispSwap_GetTexImage, (25) __glXDisp_GetPolygonStipple, (26) __glXDispSwap_GetPolygonStipple, (27) __glXDisp_GetSeparableFilter, (28) __glXDisp_GetSeparableFilterEXT, (29) __glXDisp_GetConvolutionFilter, (30) __glXDisp_GetConvolutionFilterEXT, (31) __glXDisp_GetHistogram, (32) __glXDisp_GetHistogramEXT, (33) __glXDisp_GetMinmax, (34) __glXDisp_GetMinmaxEXT, (35) __glXDisp_GetColorTable, (36) __glXDisp_GetColorTableSGI, (37) GetSeparableFilter, (38) GetConvolutionFilter, (39) GetHistogram, (40) GetMinmax, or (41) GetColorTable function.

A vulnerability was discovered in SPICE before version 0.14.1 where the generated code used for demarshalling messages lacked sufficient bounds checks. A malicious client or server, after authentication, could send specially crafted messages to its peer which would result in a crash or, potentially, other impacts.

A flaw was found in RPC request using gfs2_create_req in glusterfs server. An authenticated attacker could use this flaw to create arbitrary files and execute arbitrary code on glusterfs server nodes.

glusterfs is vulnerable to privilege escalation on gluster server nodes. An authenticated gluster client via TLS could use gluster cli with --remote-host command to add it self to trusted storage pool and perform privileged gluster operations like adding other machines to trusted storage pool, start, stop, and delete volumes.

A flaw was found in RPC request using gfs3_mknod_req supported by glusterfs server. An authenticated attacker could use this flaw to write files to an arbitrary location via path traversal and execute arbitrary code on a glusterfs server node.

A flaw was found in the way Postgresql allowed a user to modify the behavior of a query for other users. An attacker with a user account could use this flaw to execute code with the permissions of superuser in the database. Versions 9.3 through 10 are affected.

Multiple stack-based buffer overflows in the File Transfer feature in rfbserver.c in LibVNCServer 0.9.9 and earlier allow remote authenticated users to cause a denial of service (crash) and possibly execute arbitrary code via a (1) long file or (2) directory name or the (3) FileTime attribute in a rfbFileTransferOffer message.

remctld in remctl before 3.14, when an attacker is authorized to execute a command that uses the sudo option, has a use-after-free that leads to a daemon crash, memory corruption, or arbitrary command execution.

This vulnerability allows remote attackers to execute local PHP files on affected installations of Horde Groupware Webmail Edition 5.2.22. Authentication is required to exploit this vulnerability. The specific flaw exists within edit.php. When parsing the params[template] parameter, the process does not properly validate a user-supplied path prior to using it in file operations. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of the www-data user. Was ZDI-CAN-10469.

Unspecified vulnerability in the MySQL Server component in Oracle MySQL 5.5.37 and earlier and 5.6.17 and earlier allows remote authenticated users to affect confidentiality, integrity, and availability via vectors related to SRINFOSC.

The validator functions for the procedural languages (PLs) in PostgreSQL before 8.4.20, 9.0.x before 9.0.16, 9.1.x before 9.1.12, 9.2.x before 9.2.7, and 9.3.x before 9.3.3 allow remote authenticated users to gain privileges via a function that is (1) defined in another language or (2) not allowed to be directly called by the user due to permissions.