ecstatic have a denial of service vulnerability. Successful exploitation could lead to crash of an application.

Jsish 2.4.84 2.0484 is affected by: Uncontrolled Resource Consumption. The impact is: denial of service. The component is: function jsiValueGetString (jsiUtils.c). The attack vector is: executing crafted javascript code. The fixed version is: after commit f3a8096e0ce44bbf36c1dcb6e603adf9c8670c39.

ColossusCoinXT through 1.0.5 (a chain-based proof-of-stake cryptocurrency) allows a remote denial of service, exploitable by an attacker who acquires even a small amount of stake/coins in the system. The attacker sends invalid headers/blocks, which are stored on the victim's disk.

A denial of service vulnerability exists when .NET Framework and .NET Core improperly process RegEx strings, aka '.NET Framework and .NET Core Denial of Service Vulnerability'. This CVE ID is unique from CVE-2019-0980, CVE-2019-0981.

Lightbend Spray spray-json through 1.3.4 allows remote attackers to cause a denial of service (resource consumption) because of Algorithmic Complexity during the parsing of a field composed of many decimal digits.

OpenStack Keystone: extremely long passwords can crash Keystone by exhausting stack space

Specific IPv6 DHCP packets received by the jdhcpd daemon will cause a memory resource consumption issue to occur on a Junos OS device using the jdhcpd daemon configured to respond to IPv6 requests. Once started, memory consumption will eventually impact any IPv4 or IPv6 request serviced by the jdhcpd daemon, thus creating a Denial of Service (DoS) condition to clients requesting and not receiving IP addresses. Additionally, some clients which were previously holding IPv6 addresses will not have their IPv6 Identity Association (IA) address and network tables agreed upon by the jdhcpd daemon after the failover event occurs, which leads to more than one interface, and multiple IP addresses, being denied on the client. Affected releases are Juniper Networks Junos OS: 17.4 versions prior to 17.4R2; 18.1 versions prior to 18.1R2.

A firewall bypass vulnerability in the proxy ARP service of Juniper Networks Junos OS allows an attacker to cause a high CPU condition leading to a Denial of Service (DoS). This issue affects only IPv4. Affected releases are Juniper Networks Junos OS: 12.1X46 versions above and including 12.1X46-D25 prior to 12.1X46-D71, 12.1X46-D73 on SRX Series; 12.3X48 versions prior to 12.3X48-D50 on SRX Series; 15.1X49 versions prior to 15.1X49-D75 on SRX Series.

An issue was discovered in OpenAFS before 1.6.23 and 1.8.x before 1.8.2. Several data types used as RPC input variables were implemented as unbounded array types, limited only by the inherent 32-bit length field to 4 GB. An unauthenticated attacker could send, or claim to send, large input values and consume server resources waiting for those inputs, denying service to other valid connections.

In Ruby before 2.2.10, 2.3.x before 2.3.7, 2.4.x before 2.4.4, 2.5.x before 2.5.1, and 2.6.0-preview1, an attacker can pass a large HTTP request with a crafted header to WEBrick server or a crafted body to WEBrick server/handler and cause a denial of service (memory consumption).

A prototype pollution attack in cached-path-relative versions <=1.0.1 allows an attacker to inject properties on Object.prototype which are then inherited by all the JS objects through the prototype chain causing a DoS attack.

A Resource Exhaustion issue was discovered in Moxa NPort 5110 Version 2.2, NPort 5110 Version 2.4, NPort 5110 Version 2.6, NPort 5110 Version 2.7, NPort 5130 Version 3.7 and prior, and NPort 5150 Version 3.7 and prior. An attacker may be able to exhaust memory resources by sending a large amount of TCP SYN packets.

A memory leak vulnerability in the of Juniper Networks Junos OS allows an attacker to cause a Denial of Service (DoS) to the device by sending specific commands from a peered BGP host and having those BGP states delivered to the vulnerable device. This issue affects: Juniper Networks Junos OS: 18.1 versions prior to 18.1R2-S4, 18.1R3-S1; 18.1X75 all versions. Versions before 18.1R1 are not affected.

Philips e-Alert Unit (non-medical device), Version R2.1 and prior. The software does not properly restrict the size or amount of resources requested or influenced by an actor, which can be used to consume more resources than intended.

When there are multiple ranges in a range request, Apache Traffic Server (ATS) will read the entire object from cache. This can cause performance problems with large objects in cache. This affects versions 6.0.0 to 6.2.2 and 7.0.0 to 7.1.3. To resolve this issue users running 6.x users should upgrade to 6.2.3 or later versions and 7.x users should upgrade to 7.1.4 or later versions.

Philips Hue is vulnerable to a Denial of Service attack. Sending a SYN flood on port tcp/80 will freeze Philips Hue's hub and it will stop responding. The "hub" will stop operating and be frozen until the flood stops. During the flood, the user won't be able to turn on/off the lights, and all of the hub's functionality will be unresponsive. The cloud service also won't work with the hub.

Huawei AR1200 V200R006C10SPC300, AR160 V200R006C10SPC300, AR200 V200R006C10SPC300, AR2200 V200R006C10SPC300, AR3200 V200R006C10SPC300 devices have an improper resource management vulnerability. Due to the improper implementation of ACL mechanism, a remote attacker may send TCP messages to the management interface of the affected device to exploit this vulnerability. Successful exploit could exhaust the socket resource of management interface, leading to a DoS condition.

Rockwell Automation RSLinx Classic Versions 4.00.01 and prior. A remote, unauthenticated threat actor may intentionally send specially crafted Ethernet/IP packets to Port 44818, causing the software application to stop responding and crash. The user must restart the software to regain functionality.

A flaw has been found in Open5GS up to 2.7.7. This impacts the function _gtpv1_u_recv_cb of the file src/upf/gtp-path.c of the component UPF. Executing a manipulation can lead to resource consumption. The attack may be performed from remote. The project was informed of the problem early through an issue report but has not responded yet.

A security vulnerability has been detected in lm-sys fastchat up to 0.2.36. This issue affects the function api_generate of the component Worker API Endpoint. The manipulation leads to resource consumption. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. The identifier of the patch is c9e84b89c91d45191dc24466888de526fa04cf33. It is suggested to install a patch to address this issue. Commit ff66426 patched this issue in api_generate of base_model_worker.py and did miss other entry points.

An issue was discovered in Wowza Streaming Engine before 4.7.1. There is a denial of service (memory consumption) via a crafted HTTP request.

In WordPress through 4.9.2, unauthenticated attackers can cause a denial of service (resource consumption) by using the large list of registered .js files (from wp-includes/script-loader.php) to construct a series of requests to load every file many times.

A weakness has been identified in Zod jsVideoUrlParser up to 0.5.1. The impacted element is the function getTime in the library lib/util.js. This manipulation of the argument timestamp causes inefficient regular expression complexity. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.

In FreeBSD before 11.1-STABLE, 11.2-RELEASE-p2, 11.1-RELEASE-p13, ip fragment reassembly code is vulnerable to a denial of service due to excessive system resource consumption. This issue can allow a remote attacker who is able to send an arbitrary ip fragments to cause the machine to consume excessive resources.

A Malformed h2 frame can cause 'std::out_of_range' exception when parsing priority meta data. This behavior can lead to denial-of-service. This affects all supported versions of HHVM (3.25.2, 3.24.6, and 3.21.10 and below) when using the proxygen server to handle HTTP2 requests.

An error within the "parse_sinar_ia()" function (internal/dcraw_common.cpp) within LibRaw versions prior to 0.19.1 can be exploited to exhaust available CPU resources.

A vulnerability in Trend Micro Smart Protection Server (Standalone) 3.x could allow an unauthenticated remote attacker to manipulate the product to send a large number of specially crafted HTTP requests to potentially cause the file system to fill up, eventually causing a denial of service (DoS) situation.

One of the data structures that holds TCP segments in all versions of FreeBSD prior to 11.2-RELEASE-p1, 11.1-RELEASE-p12, and 10.4-RELEASE-p10 uses an inefficient algorithm to reassemble the data. This causes the CPU time spent on segment processing to grow linearly with the number of segments in the reassembly queue. An attacker who has the ability to send TCP traffic to a victim system can degrade the victim system's network performance and/or consume excessive CPU by exploiting the inefficiency of TCP reassembly handling, with relatively small bandwidth cost.

A vulnerability was identified in Nothings stb up to 1.22. The impacted element is the function setup_free of the file stb_vorbis.c. The manipulation leads to allocation of resources. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A potential denial-of-service issue in the Proxygen handling of invalid HTTP2 priority settings (specifically a circular dependency). This affects Proxygen prior to v2018.12.31.00.

An issue was discovered in Icinga 2.x through 2.8.1. By sending specially crafted (authenticated and unauthenticated) requests, an attacker can exhaust a lot of memory on the server side, triggering the OOM killer.

An issue in the Proxygen handling of HTTP2 parsing of headers/trailers can lead to a denial-of-service attack. This affects Proxygen prior to v2018.12.31.00.

phpFreeChat 1.7 and earlier allows remote attackers to cause a denial of service by sending a large number of connect commands.

The Symantec Encryption Management Server (SEMS) product, prior to version 3.4.2 MP1, may be susceptible to a denial of service (DoS) exploit. A DoS attack is a type of attack whereby the perpetrator attempts to make a particular machine or network resource unavailable to its intended users by temporarily or indefinitely disrupting services of a specific host within a network.

qemu/qemu_monitor.c in libvirt allows attackers to cause a denial of service (memory consumption) via a large QEMU reply.

A vulnerability has been identified in TeleControl Server Basic < V3.1. An attacker with access to the TeleControl Server Basic's webserver (port 80/tcp or 443/tcp) could cause a Denial-of-Service condition on the web server. The remaining functionality of the TeleControl Server Basic is not affected by the Denial-of-Service condition.